Best 1991 Dodge Ram Pickup Trailer Hitch Ball Mounts

Just received the curt trailer hitch receiver. Getting the tools out was the hardest part of the installation. Had it on and ready to go in 15 minutes. Delivery was fast and install was simple.

Sturdy and well made. Reasonable cost.

Product has performed.as advertised. Happy with it.

Excellent product and excellent instructional videos!

I ordered the D900 after purchasing a new truck that is to high for my enclosed equipment trailer (6x12) and dump trailer (6x10) to use a standard drop down hitch. The D900 drops down approximately 5 1/2" and solved this problem for me. It also is capable of rising as well which helps out some on steep inclines (driveways). It installs easily and the tri-ball for me was mandatory as both my trailers use different ball sizes. It was put into use immediately and has performed well to date. This hitch is very well made and appears to be quite durable. I also like how it extends my trailers out slightly farther than my previous set up which has allowed me a tighter radius when backing into tight spots.

I haven't used this hitch much over the last year that I've owned it but I've been completely satisfied every time I have. I'd recommend it to anyone who is looking for a"one stop" hitch. My experience with etrailer has been great, too, and I will be a customer for life as long as they continue to provide quality products at great prices.

This is a heavy (solid) receiver. Arrived on time and as expected.

Purrfect! Thanks etrailer.

I purchased several products for a truck my 1st wife was picking up from me. Everything worked fine. She is pleased and so am I. My favorite item was the back-up camera. She tells me that has prevented damage more than once. Customer service was awesome. I will buy again. Thanks.

Quality product however I should have read the description. I have no use for the huge drop down one. Oh well I will see if a buddy can use it

Just received ball mount yesterday. This ball mount is heavy duty with a quality feel. Fit and finish are impressive with durable coatings and tight tolerances. Allows me to tow my motorcycle trailer and cargo trailer with one ball mount (different ball sizes and heights for each trailer). I was worried that the 7” drop might be too low for my 2016 Ram 1500 with stock air suspension, but since installed, it looks good and I’m no longer concerned with possibly bottoming out during daily driving. Added the silencer pad upon initial install and haven’t heard any rattling. So far I’m overall impressed with this product.

Click to Enlarge

Click to Enlarge

Absolutely love this hitch!! I have a Ram 2500 Cummins Diesel so the 7" drop works great!! I towed my boat to the lake with it 2 days after revieving it and it worked flawlessly!! Last but not least....the stow away option is wonderful because my truck barely fits into my garage let alone having a hitch sticking out as well. So this was the only way to go unless I wanted to remove my hitch after every use!! Couldn't be happier and would definately recommend!!

Good heavy duty product .

I had to take trip with my new Ram 1500 Bighorn and towing my utility trailer with my old hitch wasn't having my trailer level. These items made it level and had no issues at all. Thank you, Joe

This hitch is awesome! Love that it swivels to a stowaway mode... saves the shins and when used with a receiver lock, the stowaway section cannot be stolen! ??

Well worth the money. Best hitch ever.

Delivered before schedule! Excellent customer service through the process. Hitch works great on a Ram 2500 w/6" lift. Pulled car on trailer no problem with very little play over the course of the trip.

Great product and Service, thanks a lot!

It works great, is well made, and I am really happy with it. I have a ram 2500 with and 6" lift and 37" tires and this 12" drop hitch solved the height difference between my truck and trailers.

Very good service, came on time as promised. I can see it is a quality product. I had measured the drop I needed on my 2014 Ram 2500 HD limited with class 5 hitch and 2# reducer. it measured approximately 14". This was the closest drop I could find anywhere. I hooked it up to my smaller Horton single axle trailer with a full load and it is just a little off level but will be more then sufficient to keep the trailer from swinging when towing. I plan to also use it for my double axle Horton and Hustler trailers that will be heavier and expect it will be perfectly level with the added payload. Perfect for what I need

What is there to say about a perfect hitch like this one? Why haven't you got it yet would be it. I have a 2015 Dodge Ram 2500 and it went low enough for any trailer I pulled. Performed perfectly at pulling any trailer, of any size, of any weight. Still use it today (2023) It does have a locking bolt if you don't like hitch ball rattle. But you don't have to use it and it works fine without it. The hitch rattle doesn't bother me. I guess the only thing I would have liked is if it had come with another drop hitch with 1 7/8 ball on one side. And maybe a hook or a hole for a clevis on the other side.

Super strong, not much noise. Have it on a ram 2500 on 35” tire with stock suspension and it goes low enough for my 4x8 trailer and tall enough for my dump trailer and flatbed

2008 Dodge Ram 1500 short bed. Backed it on some ramps, no need to drop the spare tire. Took about an hour to install. I work for JDog junk removal and hauling, so I was able to test the Hitch with several trailer loads . It works as discribed. . .

Excellent quality, very nice finish, well built, should hold up well. Installed on my 2017 Ram. Took longer to lower and replace tire than it did to install hitch. Would recommend this hitch to anyone.

This hitch setup is top notch! Very heavy duty. I went with this setup over cheaper similar options because those other 3 piece options that are similar just seemed clunky and held together by a lot pins with lose tolerances (IE recipe for wiggling and rattling), not to mention multiple stress points. This B&W unit is sleek and solid, no wiggling around, and tucks up out of the way nicely when not in use...which is more handy than you would think! We are using this on a 2017 Dodge Ram 1500 Big Horn with factory air suspension.

Click to Enlarge

Click to Enlarge

I love this hitch! My new Dodge sits quite a bit higher than my old truck so none of my old hitches work. I was able to replace all of my old hitches with this one. It's good and sturdy, you don't have to worry about a ball nut backing off and getting loose like I have had happen with others. And it's so simple to change between ball sizes and trailer heights, I wish I had one of these years ago!

I have not had a chance to use the ball mount yet but it is easy to use and fits receiver with no issues. I recently purchased a Curt class V receiver that is installed below my OEM receiver. With the drop installed in the Curt receiver in the upright position, the back of the ball mount comes very close to the bumper on my 2011 Ram 2500 crew cab. I will see if there are any contact issues when actually towing and revise my review, if necessary.

Click to Enlarge

I shopped around and did my homework to find which hitch would best suit my needs for towing behind a 2013 Ram 2500 diesel. I chose this hitch then found the best price on Etrailer. Easy to use website. Delivered within a week. Emails updating me with the tracking info. I would recommend. The hitch pins were off by 1/8in which made it really tight to put into the receiver. Called the manufacturer and they handled the issue immediately.

I had to take trip with my new Ram 1500 Bighorn and towing my utility trailer with my old hitch wasn't having my trailer level. These items made it level and had no issues at all. Thank you, Joe

Ultra heavy duty ball mount . Hooked up tonight to a New Holland Roll Belt 560 round baler on a Ram 3500 with a tongue weight of 1900 lbs. Pulled like a dream !!!!

It arrived very quickly and looks great on my new truck. I'll have more peace of mind towing my trailer with this instead of my old mount

Fast shipping great product. Will do business again thanks!

Really like the hitch. Changes ball size easily and plenty sturdy. Only thing I wish I did different is get the 2 1/2” shank instead of the 2” for my Ram 2500 Cummins. I bought the hitch so it would also fit my son’s Ram 1500. I have to use a 2” to 2 1/2” sleeve and it’s a little sloppy. No fault of the hitch though.

Great product,i have stock ram 2500 that sits highier than other pick ups,and couse that I was looking for adjustable hitch. I have pulled 14,000lb trailer without any problems. The adjustment are great so u can excacly set ur height to trailer. I would recomend this to everyone

Easy to install. took me longer than 30 min but it worth it. thanks. will be buying more products here

Thanks etrailer. .fast friendly. Looks good. Get job done.best deal to..like the part I can call talk to real person and take my order. .I will be back again. .have 2014 Ram 3500 dually nice fit looks strong.

Click to Enlarge

Very stout and solid. Fits a ball with a 2 3/4" or 2 5/8" shanks perfectly, so there isn't too much thread hanging out below waiting to get damaged. It slips into the Ram hitch receiver without much slop, but I haven't towed with it yet.

Ordered the same Drawbar with the 4 inch drop last year and decided I needed a 6 inch drop. This extra long drawbar is great and allows me to back up with the tailgate down for a much better view.

I needed a 10,000 lb. rated hitch with an 8" drop to tow my car trailer and this hitch fit the bill. I LOVE the cushioned mount system! Another winner from etrailer.com.

Nothing complicated here. Ball mount works as advertised. Good price, fast delivery.

Click to Enlarge