Best 1983 Dodge Ram Pickup Camper Jacks

Very solid and heavy duty jack, with bright LED lighting, manufactured by Ram. Adjustable foot piece for quicker adjusting... Jack pretty easy to install, with single wire electrical connection and 3 bolts. Jack has low gear ratio and foot shaft moves slowly, but has plenty of power to lift front of trailer. Plenty of clearance behind jack for propane tank cover on our Airstream. Replaced more expensive model that was bent at mounting flange being winched onto transport trailer.

Click to Enlarge

Installed the new RAM electric tounge jack on my enclosed car hauler trailer. Very happy with this unit. Quick install, like the adjustable foot pad, and operated smoothly. etrailer packages well and deliveries quick.

Click to Enlarge

Click to Enlarge

Very easy to install went right in place of the two support jacks that were broken just removed the existing self tapping screws and one bolt and the job is complete.

Just what I needed great quality and even better price. Fast shipping arived in 5 days all the way across the country.these are great jacks at a great price I would definetly by these from etrailer if I ever need them again.

I was quite surprised that the Tripod helped so much in stabilizing our 5th Wheel. I was a bit skeptical, but I am very impressed with how well it works and how quickly it was shipped. We ended up buying an extra lock for $12.00 to get "free Shipping"(which would have been $19.00). Win win...

Great service - I have ordered several things from etrailer at different times and I have always been very pleased. I just tried this stabilizer on my 5th wheel and it looks like it will do the job. I will know better in a couple of weeks after our next outing but for now I am very happy with it.

The gear box is the higher quality metal (aluminum) kind. If you have plastic it will be a big upgrade. The telescoping square connecting shaft that goes between the legs is a noticeably much thicker steel than the OEM one, though it is not painted and does not seem to be galvanized. I wiped it down with a thin coating of WD-40 to prevent rusting. The legs themselves are much the same as the OEM lippart legs that I had but with a few added features. These legs have an easy to remove top plate that is secured with screws (OEM had roll pins that had to be punched out). They also have grease zerks for the gears and the lead screw. There are tapped holes on either side of the leg so that you can orient the zerks for easy access no matter what orientation your rig calls for on installation. There are plugs that go in the unused holes to keep grease from squirting out. This is a huge plus. The main reason that people have problems with landing gear legs is because the lube dries up and the legs seize or become difficult to actuate or the gears get stripped. The only negative thing that I have to say about the legs is, they have a little more play than the OEM ones (inner leg that sleeves into outer leg has a little play). This is not a problem for me because I have stabilizer bars connected to them. But it could bug some people because it would add slightly more shake to a rig with no stabilization. If you want to replace some aging legs that don't work well this is a very good high value way to do it. Knowing what I know now, because etrailer has such great high value parts, I would buy two gear boxes Item # RVLG-RDBOX, two lead legs Item # RVLG-LEGL, two motors Item # M1230 and a second switch # LC138415. This setup would require proper wiring and fusing for the second switch/motor but would give you dual drive and front leveling capabilities.

These worked great and were a good price.

Just as described. Appear to be of very good quality.

Very easy to install went right in place of the two support jacks that were broken just removed the existing self tapping screws and one bolt and the job is complete.

Great directions for manual assembly, quality metal and parts. Solid and exactly the heavy duty I was looking for to use with my slide in truck camper.

Click to Enlarge

Click to Enlarge

Click to Enlarge

The Brophy jacks were strong, stable, easy to position, and easy to lift and lower my camper. it is a much better method than having four jacks to maneuver. And it cut down my time to 30 minutes total to load my camper instead of an hour and a half! I have to start from my garage and winch my camper down on a cart to the street face because of the incline driveway is so dramatic and my camper won’t fit in my garage if it is attached to the truck. I couldn’t be more happy they were great and now I have my truck loaded with my very modern camper and I’m enjoying quite the holiday! I’m using the 3 ton 67 inch trophy jacks and I’m lifting an 800 pound gross camper. The stability is outstanding.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Easy to install and use. Adds stability over factory installed jacks. Quality is good.

these are very well built.

Delivery was incredibly fast( within a couple days!). Like other reviews, I was very please how good the stabilizer minimized movement on our 5th wheel camper. I have made several purchases from etrailer.com and have been satisfied each time with prices,product and speed of delivery! THANKS

Click to Enlarge

We have had for a year now and has done what we wanted it to do. This has made our camper so much more stable for us.

Installation would have been a breeze, but my trailer had a completely sealed under side which offered some challenges. That’s nothing to do with the product. The jacks are amazing, makes setup very easy with the push of a button. Should have installed these years ago.

appears to be very well made as i unboxed. in the process of installing. etrailer honored their low price promise. also got free shipping. i will be buying more stuff from them.

These Jack's made both building and positioning my teardrop onto the trailer bed easier. At campsites they easily level the trailer. So yes I'm happy.

Click to Enlarge

we are using these stabilizers for supporting our offloaded truck camper (adventurer 910db) where we reside full-time ... they are very easy to use, provide excellent support for the truck camper and have eliminated 98% of wobble ... the support structure includes jack pads, e-trailer stabilizer, 2x6 pressure treated lumber, 4x8 3/4 inch pressure treated plywood

Click to Enlarge

Perfect fit for my Pull behind Motorcycle trailer project. Looks solid and fast shipping! Thanks etrailer!

Click to Enlarge

Excellent product, I can't wait to install it and try it out. So far it seems very strong and capable on Do it what it was design to do.

We just put this on and we love it !!! It is going to make our life a lot easier! !!

Not as good as I had hoped. Jack motor is very slow and seems weak. The twist off cap on the top loses it's o-ring each time I take the cap off to manually wind the jack.

Not as good as I had hoped. Jack motor is very slow and seems weak. The twist off cap on the top loses it's o-ring each time I take the cap off to manually wind the jack.

We just put this on and we love it !!! It is going to make our life a lot easier! !!

Great, it matched up to where old one was

Great fit

This is replacing a Bulldog jack that's 22 years old and was recently stripped out. It will be a huge improvement. The shipping was fast, and the product showed up very well packaged. I'm looking forward to welding it on this weekend.

I used this on a 1972 Argosy and surprising it fit into the original hole pattern. It works AWESOME--I love it and would highly recommend it to anyone!!

very easy to install, works great.

Good product! 3 day delivery, no missing or damaged components. 2 hour install...an extra pair of hands is very helpful. I completely assembled the device, left all fasteners a litle loose, slid underneath my 36' trailer. Set width beforehand plus one half inch using jack legs to raise against trailer frame then adjusted finish width. Sure makes life easy for someone with physical limitations.

Finally got around to installing my PT II Stabilizers 30" front and rear of our 26' Surveyor. Pre - assembled them to make sure they went together ok. Luckily I had two sources for power front & rear which made wiring easy, I used a Buss block to make all positive connections, grounds straight to frame, soldered all connections and heat srinked to seal. Using the 3/8" self tappers was fun.Well got it all together and all works well makes trailer very stable, don't have to worry about scissor jacks collapsing anymore.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Product was exactly what I needed. We only had to make one modification to the legs so that we did not have to weld in the new straps. Works perfect. I would love that it instructions would have shown the picture as if you were facing the equipment.

Product was an exact fit for my application only problem I had was key inside gear box fell out but easily fixed once I figured it out.etrailer was spot on helping me find correct jack for my ca.per works great

Ok.... the customer service from ETRAILER totally saved the review! These guys are incredibly awesome. I ordered 2 of the jacks. The first came with a broken housing cover , the light had beed disloged, and the up down switch was wired backwards. (Up would put the jack down and down would put the jack up) Solution? Glad you asked! I contacted ram about the cover.... waiting! The light was easy to correct, just had to slide it back into the slit that holds it. Switch, well.... if-your2 not comfortable with wiring, I recommend not even attempt to rewire. I just popped it out of the cover, twisted 1/2 turn, popped it back in. Total time to correct.... 8-10 minutes. Total time to install, 15 minutes. Total job less than 30 minutes. Would I recommend this jack... YES. Despite a shipping issue to crack the housing ... its easy to install, price right, powerful. I dont have to hand crank. Simple correction to the switch. And they could use some r&d improvment on the light... but excellent jack! It does what i meeded it to at an affordable price!

Click to Enlarge

We recently replaced our Lippert Power tongue jack with a Ram from etrailer. The jack works well raising and lowering the trailer but the motor sounds very labored. We are concerned how long this jack will last.

This was a perfect replacement for a damaged jack. This is a quality product for a very fair price. This is not my first order with etrailer.com and will not be the last. Every product I have ordered is high quality and shipped quickly. I am never disappointed.

Cathy T was most helpful with all my questions. I ordered the RAM 2,500 lbs. jacks to replace my OE jacks on my 2018 Sonic 200VML TT. My OE jacks BAL were poorly designed ,and cheaply manufactured using very thin materials (flimsy) , The RAM jacks use thicker materials ,and bolts in manufacture. RV does not wobble now.