1992 GMC C/K Series Pickup Truck Bed Bike Rack

Features:

Space-saving carrier lets you transport 1 bike in your truck bed. Adjustable, ratcheting straps hold your bike firmly by the fork and seat stay. Clamp-on installation onto truck bed side rails. Built-in D-rings provide cable lock tie-down points.

Installation Notes:

No drilling required for installation

Features:

Carry 2 bikes with this custom fit half pad. It holds your bikes over the tailgate, so you won't have to throw your bikes haphazardly in your truck bed. It also frees up your hitch so you can tow and carry bikes at the same time.

Features:

Ditch the fork block and keep your front wheel on - transport your bike in your truck bed with this wheel-mount bike rack. Ratcheting arm holds bike by the front wheel. Rack drops into tailgate opening and secures when tailgate closes.

Installation Notes:

No drilling required for installation

Features:

Transport 2 bikes in your truck bed with this fork-mount carrier. A telescoping arm extends to fit any size bed. Fork mounts hold bikes with 9-mm skewers or 15-mm thru-axle forks and lock for security. Included locks secure rack to your vehicle.

Installation Notes:

No drilling required for installation

Features:

Fork-mount bike carrier hauls 3 bikes upright in a truck, SUV, or van. Lay the track on the floor to mount your bikes. Rubber pads on bottom prevent sliding. Included traps mounts stagger along triple-grooved track to prevent bike-to-bike contact.

Installation Notes:

No drilling required for installation

Features:

Fork-mount bike carrier hauls 3 bikes upright in a truck, SUV, or van. Lay the track on the floor to mount your bikes. Rubber pads on bottom prevent sliding. Included traps mounts stagger along triple-grooved track to prevent bike-to-bike contact.

Installation Notes:

No drilling required for installation

Features:

Tailgate pad converts your tailgate into an easy-to-use 6-bike rack. Integrated bike cradles and closure straps keep your bikes stable and secure. Tuck-away flap provides access to tailgate or rearview camera. Attaches to tailgate with straps.

Installation Notes:

No drilling required for installation

Features:

This tailgate pad and bike rack lets you transport up to 7 bikes in your compact truck bed. Soft rubber pads with anchor straps keep bikes separated and secure on the rack. Large panel provides backup camera visibility and tailgate handle access.

Installation Notes:

No drilling required for installation

Tech Tip:

Because of the shorter width of the tailgate, this product is recommended for Stepside beds.

Features:

Tailgate pad converts half of your tailgate into an easy-to-use 2-bike rack. Integrated closure straps keep your bikes stable and secure. Attaches to tailgate with straps.

Installation Notes:

No drilling required for installation

Features:

Stop throwing your bikes in the back of your truck and carry them upright with this truck bed bike rack. Easy, clamp-on installation on your bed rails or utility bed rail system. Skewers and adapters for 9-mm quick-release and thru axles included.

Installation Notes:

No drilling required for installation

Features:

Fork-mount rack lets you carry a bike with a thru-axle in your truck bed, SUV, or trailer, or in your vehicle's utility track. Locking cover helps deter theft of your bike. Bolt-on installation on most flat surfaces with included hardware.

Installation Notes:

Drilling required for installation

Features:

BlockHead fork-style, single-bike carrier bolts anywhere along your truck bed rails, making it the most versatile bed mount by Yakima. The bike is secured by a locking skewer that engages with a quick-release lever for easy loading and unloading.

Installation Notes:

Drilling required for installation

Features:

This padded rack lets you carry 5 bikes on your truck bed tailgate. It's a great alternative to fork blocks, it doesn't require drilling into your truck bed, and you don't have to remove your bikes' front wheels.

Installation Notes:

No drilling required for installation

Features:

Fork-mount rack holds 1 bike with a quick-release front wheel in your truck bed or trailer. Quick-release, 9-mm skewer allows for rapid loading and unloading, and aluminum construction is rustproof. Bolt-on installation - hardware not included.

Installation Notes:

Drilling required for installation

Features:

This fork-mount bike rack provides a mounting point for a bike with a Boost 110 thru-axle fork. It bolts to almost any flat surface and comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation

Features:

This fork-mount block bolts onto almost any flat surface and provides a mounting point for 1 bike with a 9-mm quick-release skewer, a 12-mm thru-axle fork, or a 15-mm thru-axle fork. Supports bikes up to 45 lbs.

Installation Notes:

Drilling required for installation

Features:

This fork-mount bike rack provides a mounting point for a bike with a 100 thru-axle fork. It bolts to almost any flat surface and comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation

Features:

Great for making your own bike rack, The Claw can be attached to nearly anything, including pickup truck beds, 2x4s, trailers and cargo carriers. It accommodates one bike with quick-release front wheels.

Installation Notes:

Drilling required for installation

Features:

This heavy-duty, padded vinyl cover provides an easy, inexpensive way to carry up to 6 bikes over the tailgate of your pickup truck. Included wraps let you tether bikes together on a daisy chain, and a built-in flap allows access to tailgate handle.

Installation Notes:

No drilling required for installation

Features:

Secure your dirt bike without tie-down straps or wheel chocks. Just clamp down the jaws on your foot pegs and you're good to go. This fully adjustable system mounts in either your truck bed or trailer, and fits most full-size bikes up to 400 lbs.

Features:

Tailgate pad converts your tailgate into an easy-to-use 5-bike rack. Integrated bike cradles and closure straps keep your bikes stable and secure. Tuck-away flap provides access to tailgate or rearview camera. Attaches to tailgate with straps.

Installation Notes:

No drilling required for installation

Tech Tip:

Because of the shorter width of the tailgate, this product is recommended for Stepside beds.

Features:

This simple, affordable fork-mount bike rack bolts to almost any flat surface and provides a mounting point for 1 bike. The fork block works with fat bike forks that have 15-mm, thru-axle skewers. Comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation

Features:

This simple, affordable fork-mount bike rack bolts to almost any flat surface and provides a mounting point for 1 bike. The fork block works with bikes that have 15-mm, thru-axle skewers. Comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation

Features:

This tailgate pad and bike rack lets you transport up to 8 bikes in your full-size truck bed. Soft rubber pads with anchor straps keep bikes separated and secure on the rack. Large panel provides backup camera visibility and tailgate handle access.

Installation Notes:

No drilling required for installation

Features:

This padded rack lets you carry 7 bikes on your truck bed tailgate. It's a great alternative to fork blocks, it doesn't require drilling into your truck bed, and you don't have to remove your bikes' front wheels.

Installation Notes:

No drilling required for installation

Features:

This aluminum fork block can be installed on any flat surface to create a custom bike carrier or used to add or replace a fork block on a Saris Traps Single or Triple Track. Provides mounting point for 1 bike. 9-mm Quick-release skewer included.

Installation Notes:

Drilling required for installation

Features:

This fork-mount bike rack can easily attach to your pickup truck bed, trailer, van, or even a wall at home. Accommodates a bike with a 9-mm quick-release skewer.

Installation Notes:

Drilling required for installation

Features:

This heavy-duty, padded vinyl cover provides an easy, inexpensive way to carry up to 6 bikes over the tailgate of your pickup truck. Included wraps let you tether bikes together on a daisy chain, and a built-in flap allows access to tailgate handle.

Installation Notes:

No drilling required for installation

Tech Tip:

Because of the shorter width of the tailgate, this product is recommended for Stepside beds.

Features:

This simple, affordable fork-mount bike rack bolts to almost any flat surface and provides a mounting point for 1 bike. The fork block works with fat bike forks that have 15-mm, thru-axle skewers. Comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation

Features:

Carry 1 bike on your pickup truck with this fork-mount-style rack. 2 Vacuum cups allow the rack to attach to your truck's rear window in seconds and it won't scratch your glass. Small rack fits easily into a bike bag or carry-on luggage.

Installation Notes:

No drilling required for installation

Features:

This simple, affordable fork-mount bike rack bolts to almost any flat surface to provide a mounting point for 1 bike. The fork block works with fat bike forks that have 9-mm quick-release skewers. Comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation

Features:

Tailgate pad converts your tailgate into an easy-to-use 5-bike rack. Integrated closure straps keep your bikes stable and secure. Roll-up flap provides access to tailgate or rearview camera. Attaches to tailgate with straps.

Installation Notes:

No drilling required for installation

Tech Tip:

Because of the shorter width of the tailgate, this product is recommended for Stepside beds.

Features:

This simple, affordable fork-mount bike rack bolts to almost any flat surface and provides a mounting point for 1 bike. The fork block works with bikes that have 9-mm, quick-release skewers. Comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation

Features:

Tailgate pad converts your tailgate into an easy-to-use 6-bike rack. Integrated closure straps keep your bikes stable and secure. Roll-up flap provides access to tailgate or rearview camera. Attaches to tailgate with straps.

Installation Notes:

No drilling required for installation

Tech Tip:

It is recommended that trucks with a stepside bed use part KU69ZR.

Features:

Turn your truck bed into a bike rack in seconds with the Swagman Pick-Up. This 2-bike, fork-mount rack snaps into place without tools and has an integrated push-button lock for security. Telescoping arm adjusts to fit most compact and full-size beds.

Installation Notes:

No drilling required for installation

Does not fit trucks with Flareside or Stepside bed

Features:

The RockyMounts HotRod is a sturdy, reliable way to transport your thru-axle bike in your truck bed. This bolt-on system installs easily and holds bikes with 12-mm or 15-mm thru axles. Includes set of 3 axles sleeves.

Installation Notes:

Drilling required for installation

Features:

This padded rack lets you carry 5 bikes on your truck bed tailgate. It's a great alternative to fork blocks, it doesn't require drilling into your truck bed, and you don't have to remove your bikes' front wheels.

Installation Notes:

No drilling required for installation

Tech Tip:

Because of the shorter width of the tailgate, this product is recommended for Stepside beds.

Features:

Fork-mount rack lets you carry 2 bikes with a thru-axle in your truck bed. Locking covers help deter theft of your bikes. Bolt-on installation with included hardware.

Installation Notes:

Drilling required for installation

Features:

This simple fork-mount bike rack bolts to almost any flat surface and provides a mounting point for 1 bike. The fork block works with bikes that have 15-mm, thru-axle skewers. Hardware not included.

Installation Notes:

Drilling required for installation

Features:

Secure your dirt bike without tie-down straps or wheel chocks. Just clamp down the jaws on your foot pegs and you're good to go. This fully adjustable system mounts in either your truck bed or trailer, and fits most kid's bikes up to 200 lbs.

Features:

Secure your dirt bike without tie-down straps or wheel chocks. Just clamp down the jaws on your foot pegs and you're good to go. This fully adjustable system mounts in either your truck bed or trailer, and fits most full-size bikes up to 315 lbs.

Features:

Secure your dirt bike without tie-down straps or wheel chocks. Just clamp down the jaws on your foot pegs and hit the road. Installs in your truck with adapter plates designed for corrugated beds. Fits most 85cc motocross bikes up to 200 lbs.

Features:

Fork-mount bike carrier hauls 3 bikes upright in a truck, SUV, or van. Lay the track on the floor to mount your bikes. Rubber pads on bottom prevent sliding. Slide included traps mounts anywhere along the single-grooved track for best bike placement.

Installation Notes:

Drilling required for installation

Features:

Secure your dirt bike without tie-down straps or wheel chocks. Just clamp down the jaws on your foot pegs and hit the road. Installs in your truck with adapter plates designed for corrugated beds. Fits most motocross bikes up to 315 lbs.

Features:

BlockHead fork-style, single-bike carrier bolts anywhere along your truck bed rails, making it the most versatile bed mount offered by Yakima. The bike is secured by a skewer that engages with a quick-release lever for easy loading and unloading.

Installation Notes:

Drilling required for installation

Features:

This simple, affordable fork-mount bike rack bolts to almost any flat surface and provides a mounting point for 1 bike. The fork block works with bikes that have 20-mm, thru-axle skewers. Comes with drilling template - hardware not included.

Installation Notes:

Drilling required for installation