What our customers are saying:
This site is top notch: Great prices, great service. Highly recommended.
Scott
Lafayette, CO
Videos
for Truck Bed Bike Racks
Help Articles
Expert Answers
The 1-Bike Add-On for Thule Bed Rider Pro Truck Bed Bike Rack #TH98YC is meant to fit onto the square bars of the Thule Bed Rider Pro #TH38YC which uses a 30x20mm (1-3/16" x 25/32") square bar. With your bars…
For your 2024 Ford F-250 I recommend checking out the Half Tailgate Pad for Trucks #BDW79QB. This is a tailgate pad that just drapes over your tailgate and gives you the ability to carry up to 2 bikes securely and easily. The pads are…
Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The…
Hey Ryan, so there isn't a special type of pipe that the LaSalle Bristol RV Shower Drain w/ Grid Strainer #34433JN1202 is designed to only work with. The PVC or polyurethane you mentioned from Home Depot would work great.
I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will…
Yes, the Half Tailgate Pad Bike Rack part #BDW79QB that you referenced does work with your two electric fat bikes.
It looks like you have the TrackTowers for Yakima Crossbars and Platforms #Y52AV so you actually don't need any adapters to attach to your Yakima LockNLoad platform.
There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of…
Yes, it will so long as you have one of the following bike racks Y02473, Y02473-02475, Y02474, and Y02474-02475! The Replacement SpeedKnob for Yakima Dr. Tray Bike Racks item #8880717 fits a mixture of 2" and 1-1/4"…
I recommend going with the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW #BLU66FR to pull your Grand Design Imagine 2670MK RV. This is a very impressive weight distribution system that is much quieter…
For your 2016 Nissan Frontier with the Utili-Track system the Inno Velo Gripper #INRT202 is compatible. It comes with the hardware to install directly into the Utili-Track C-Channels. For this product C-Channel and Utili-Track are the same.
I do have a solution for you, however the Saris Fork Mount Bike Carrier #SATR1BLK that you referenced is not compatible with a 12-mm x 10-mm thru-axle and there is not an adapter available that will fit it. The best option for a similar carrier…
