What our customers are saying:
Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast.
John
Mankato, MN
Videos
for Truck Bed Bike Racks
Help Articles
Expert Answers
I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate…
The 1-Bike Add-On for Thule Bed Rider Pro Truck Bed Bike Rack #TH98YC is meant to fit onto the square bars of the Thule Bed Rider Pro #TH38YC which uses a 30x20mm (1-3/16" x 25/32") square bar. With your bars being…
Yes, it will so long as you have one of the following bike racks Y02473, Y02473-02475, Y02474, and Y02474-02475! The Replacement SpeedKnob for Yakima Dr. Tray Bike Racks item #8880717 fits a mixture of 2" and 1-1/4" Dr Tray bike…
Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is…
Hey Ryan, so there isn't a special type of pipe that the LaSalle Bristol RV Shower Drain w/ Grid Strainer #34433JN1202 is designed to only work with. The PVC or polyurethane you mentioned from Home Depot would work great.
I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.
I spoke with my contact at Kuat and he informed that the Kuat Dirt Bag part #DRT15 is designed to fit axle sizes that are 15 mm x100 mm. To see more dimensions for this product check out the picture I attached.
The Inno Velo Gripper Bike Rack for Truck Beds, part #INRT202 is designed for trucks just like your 2012 Frontier. I have attached a photo of the #INRT202 for you. The small square plate( pointed out with an arrow in the photo) attached to the eye…
Yes, the Half Tailgate Pad Bike Rack part #BDW79QB that you referenced does work with your two electric fat bikes.
It looks like you have the TrackTowers for Yakima Crossbars and Platforms #Y52AV so you actually don't need any adapters to attach to your Yakima LockNLoad platform.
I recommend going with the Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - 10,000 lbs GTW, 1,000 lbs TW #BLU66FR to pull your Grand Design Imagine 2670MK RV. This is a very impressive weight distribution system that is much quieter…
For your 2016 Nissan Frontier with the Utili-Track system the Inno Velo Gripper #INRT202 is compatible. It comes with the hardware to install directly into the Utili-Track C-Channels. For this product C-Channel and Utili-Track are the same.