1984 Chevrolet C/K Series Pickup Truck Bed Extender

According to Inno, the Inno Kayak Lifter Load Assist - Clamp On - Side, part #INA453, is supposed to be mounted outside of the towers on your vehicle. Unfortunately the bars on your roof rack terminate at the rails on your vehicle so you will not…

I have what you need! Even though we have amazing options for installing a complete roof rack system on your Ford F-150 with a Leer camper shell, installing the WingBar Evo Crossbars onto a track system is a complicated process. This is because…

Although the Lock N Roll Articulating Trailer Coupler for 2" Receivers #336TS510 has a 5/8" pin hole to secure it to your trailer, you can definitely weld this to your trailer instead. Just be sure the work is done by a qualified welder…

As you can see in the diagram I provided, the tilt is adjustable up to about 45°. The tilt mechanism has a pin that can be used in two different positions to allow a roughly 15 or 30° degree tilt or the pin can be completely removed for the…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

The Titan Chain Tire Chains w Cams #TC3235CAM are confirmed to fit your 35x12.5x20 sized tires. They do have built in cam tighteners so additional adjusters are not necessarily required although they can make things easier. For a rubber adjsut you…

When it comes to installing a trailer wiring harness on your 2000 Chevrolet Express Van The T-One Vehicle Wiring Harness #118377 is the best out of all the plug and play harnesses for your vehicle. The T-One harness are made out of a heavier gauge…

First of all, thank you for your service. Unfortunately at this time we don't offer a military discount, but we do have free shipping most of the time on orders like this one. To confirm your fit, we have two sets of jounce springs available from…

Great question. To get the proper Item and fit I will need to know the size and shape of the feet on your system. Are they round, square, rectangle. Do they have a lip or raised edge or are they complete flat and level? The SnapPad XTRA Jack Pads for…

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they have…

Yes, the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) #Y07235 is exactly what you need in order to lock the Yakima Longarm Truck Bed Load Extender #Y01149. This will simply fit around the anti-rattle bolt that was…

I may have some solutions for you, but there are not any ladder racks available for a 2020 Honda Ridgeline and there are not any tonneau covers that are compatible with an over the bed style rack system. However, you can use a tonneau cover and roof…