I went ahead and reached out to my tech at DeeZee, and they said that from their available diagrams, the DeeZee Brite-Tread Wrap Side Bed Caps # DZ31967 do widen slightly toward the center to about 1/4 of an inch wider. However, with that being said, they did confirm that the # DZ31967 fits perfectly with your 8-foot bed on your 2019 Ram 1500 Classic. view full answer...
According to Putco, the T-slots on their TEC rail kit, like part # P28FR for the 2018 Ford F-150 with the 5-1/2 foot bed would be compatible with the Yakima OutPost HD ladder rack, part # Y01152-58 if the # Y01155 tonneau adapters are used.
This being said, you'll need to be using a tonneau cover that mounts to the inside of the bed sides, and to the top of the bed side. view full answer...
For your 1991 GMC 1500, the Putco Locker Truck Bed Side Rails - Polished Stainless Steel with Black Nylon Castings Item # P99812 includes the following parts:
- 4 nylon end castings
- 2 tubes
- 1 hardware kit
- 4 rubber expanders
- 4 rubber spacers (for use with Tundras only)
The hardware kit includes the following:
- 4 5/16” X 3” Bolts
- 4 black gaskets
- 4 black bushings
- 4 5/16” X 3” Full threaded bolts
- 4 plastic bolt sleeves
This kit does not include the... view full answer...
We do indeed offer protectors that cover the top of the tailgate and the front rail of the bed right behind the cab. The side rail caps are part # DZ11994 and the tailgate cap is part # DZ2101. The sides and tailgate cap are all in Brite-Tread (aluminum diamond plate). view full answer...
The actual weight of the Access Custom Stainless-Steel Tailgate Protector # A27040239 is right around 26-lbs. The 29-lb shipping weight of the product also includes all of the protective packing materials that ensure it gets to you in good condition. These packing materials are roughly 3-lbs.
The pad itself measures 62 long x 22 wide x 1 thick and it installs with included hardware. view full answer...
We do indeed offer the side caps in black as part # DZ11994B and the tailgate cap as part # DZ2101B. They are a confirmed fit for your 1998 Chevy C/K pickup. view full answer...
The Husky Liners Quad Caps Truck Bed Rail Protectors w/ Removable Stake Pocket Covers # HL97101 are a confirmed fit for your 2009 Chevy Silverado with a 6-1/2 foot bed.
These bed rail protectors are designed to be able to work with tonneau covers although there may be a slight gap if you utilize a tonneau that sits on top of the bed rails. Due to that I recommend a tonneau cover that installs inside the bed rails of your 2009 Silverado such as the BAKFlip MX4 Hard Tonneau Cover # BAK48101.
I... view full answer...
You do have options for attaching a rack to your 2015 Chevrolet Silverado 1500 with the BakFlip MX4. Since this tonneau cover does not cover the stake pockets, any rack that utilizes the stake pockets will work. Please keep in mind that you will not be able to attach a track mounted to system to this truck.
You can add rails to the truck bed via the stake pockets and then attach Rapid Crossroad Feet for Thule Crossbars - Raised Railing - Qty 4, part # TH450R, and the Thule WingBar Evo... view full answer...
On the inside of the tailgate the Putco Tailgate Cap part # P52617P goes down about 1 inch from the top of it. I attached a picture that shows you what the inside portion looks like. view full answer...
We have just what you're looking for, the Putco Stainless Steel Tailgate Cap, part # P51617P.
The cap is manufactured in the US, and carries a lifetime warranty. The cap installs using the included hardware. view full answer...
There is not a custom fit bed rail for your 1999 Ram 1500 6-1/2 foot bed. The closest we have to what you are looking for is the Putco Truck Bed Rail Protective Skins - Stainless Steel # P59690 which is a custom fit for 2008 to 2013 Chevy Silverado 6-1/2 foot bed. This does install with 3M tape so no drilling is required. It may fit your truck, but has not been tested and was specifically designed for the vehicles stated.
You may want to consider the Westin Platinum Series Oval Truck... view full answer...
Yes, the Husky Liners Quad Caps Truck Bed Rail Protectors w/ Removable Stake Pocket Covers part # HL97111 will work with a tonneau cover. Depending on which tonneau cover you have installed on your 2013 Chevy Silverado, the cover will either sit atop the bed caps or along the inside of the bed rails thus not interfering.
I have attached a photo of these bed caps installed on a similar truck for you. view full answer...
I checked with Putco and the Putco Truck Bed Rail Protective Skins # P59567 you mentioned are not a fit for your 2006 Chevy Silverado 2500 with a 6-1/2 foot bed, though we may have an option for you, the DeeZee Brite Tread Wrap Side Bed Caps with Stake Pocket Holes # DZ11992.
The reason I say "may" is because I checked with DeeZee to confirm a fit, and these caps will only work so long as your '06 Silverado 2500 has the plastic factory bed cap already on the side rails - these caps are... view full answer...
For your 2018 Ram 1500 with 5-1/2 foot bed, I recommend the Putco Pop-Up Locker Truck Bed Side Rails - Polished Stainless Steel # P29862 or Chrome # P69862. There are a few options with different style fasteners, so I've listed all your options below.
Putco Locker Truck Bed Side Rails - Polished Stainless with Black Nylon Castings # P99862
Putco SSR Locker Truck Bed Side Rails - Polished Stainless with Black Nylon Castings # P79862
Putco Oval Locker Truck Bed Side Rails - Polished... view full answer...
We do offer both tailgate protector and raised side bed rail kits for your 2015 GMC Sierra Double Cab. All of these are shown on the linked page and we have bed rail kits for 5-1/2, 6-1/2 and 8-foot bed lengths.
Access Tailgate Protector # A27020309 features all-stainless-steel construction but it does not have the diamond plate pattern; it has a smooth surface with beveled edges to make it easier to slide cargo in and out. Diamond plate looks nice but for utility the smooth tailgate... view full answer...
For your 1999 Ford Ranger with a 6 foot bed we have the Putco truck bed rail skins part # P59578 which is a chrome cover for the top of the bed rails that has open stake pockets like you mentioned wanting. This will fit over your bed rails and has cut outs to give you complete access to the stake pocket holes. view full answer...
The Putco Full-Coverage Tailgate Protector # P59123 will not cover the top edge of the tailgate on your 2005 Ford F-150. It is designed to fit over the interior of your truck's tailgate. If you are looking to cover the top edge of your tailgate you can use the Putco Tailgate Cap # P52619P, which according to Putco will work with the tailgate protector. I've linked the instructions for both parts so you can take a look. view full answer...
The Husky bed side protectors # HL97121 fit 2008 - 2013 GMC Sierras with 6-1/2 Foot Beds, 2014 - GMC Sierra 2500 and 3500s with 6-1/2 Foot Beds and 2007 GMC Sierra New Body with 6-1/2 Foot Beds. I checked all of these and found that the only options are stainless steel, # P53617P. It fits all of the trucks listed above. view full answer...
We do offer stainless steel tailgate caps for your 2005 Silverado non-step-side 6-1/2-foot bed, Putco parts # P51615P and # P51617P. However these are not an exact match for the DeeZee Rail Caps # DZ11992 which have a Brite Tread texture.
According to my contact at Putco these two parts differ in that item # P51617P extends down the inside of the tailgate approximately 4-inches while # P51615P extends down only about 1-inch. view full answer...
I spoke with my contact at Husky and the Husky Quad Caps Rail Protectors, # HL97101, will not fit your 2003 Chevrolet Silverado 2500 crew cab with 6-1/2 ft bed. The Quad Caps are only being manufactured to fit 2012 vehicles and newer.
I have attached a link to all of the truck bed rail caps that we carry for your truck. view full answer...
Putco only overs the rails like part # P59582 with stake holes like you mentioned so best option would be stake pocket covers like the part # TX1704210 which you could use to cover the holes. view full answer...
I reached out to the manufacturer and the Putco Tailgate Cap - Stainless Steel # P51614P measures 50.25 inches long. He didn't have a width and we don't have one to measure ourselves so all I can give you is that he says it will cover the top side completely.
This Product Fits The Following Vehicles:
1988 - 2000 Chevrolet C/K Series Pickup 6-1/2 Foot Bed - Stepside
1988 - 2000 GMC C/K Series Pickup 6-1/2 Foot Bed - Stepside
1988 - 2000 GMC C/K Series Pickup 8 Foot Bed view full answer...
Yes, as long as the bed rail covers don't obstruct the opening of the stake pockets the Putco Locker Truck Bed Side Rail Covers # P49833 will work well. At worst you may have to trim the bed rail cover. view full answer...
As long as the tonneau cover on your 2019 Ford F-250 installs completely inside the rails (nothing overlaps to the top of the rails) the Putco Locker Truck Bed Side Rails # P88871 you referenced will install and work perfectly. There won't be any interference between the base hardware and the tonneau.
The corner castings will simply insert into the stake pockets on the rails so the base is just slightly larger than their opening. I wasn't able to track down the exact dimensions of this... view full answer...
It sounds like you are looking for the Putco Tailgate Cap # P51617P which is confirmed to fit the tailgate on your 2005 Chevrolet Silverado Short Bed and is made out of 17 gauge stainless steel making it just under 1/16" thick.
The # P51617P hangs down about 4" which will be able to cover the bolt holes mentioned.
view full answer...
The Putco Tailgate Cap part # P53614P installs using self tapping screws which are included for you. They install on the inside of the tailgate so they won't be as visible. I am sure you could also use some 3M double sided adhesive for a less permanent install if you like. This can be acquired at most local auto parts stores. view full answer...
If your toolbox is covering up the front stake pocket hole on the bed rails of your 2009 Chevy Silverado with a 5-1/2 foot bed the part # 50-2030-C is not going to be compatible.
If the toolbox sits between the bedrails instead these would fit just fine. view full answer...
Unfortunately we do not carry the 3M tape to reinstall the Putco Truck Bed Rail Protective Skins - Stainless Steel # P59527 but they simply utilize the RED 3M double sided tape. Simply clean the top of the bed rails, add the tape and then install the rail skins. view full answer...
As you mentioned in your question, the Putco Truck Bed Rail Protective Skins # P59527 easily installs using pre-applied 3M tape on the trim pieces. I checked with Putco and they state that once the skin is in place it cannot be moved or removed without causing damage to the part. With this in mind you will not be able to take the piece off and re-install it at a later time.
view full answer...
The Putco Truck Bed Rail Protective Skins for Use with Tonneau Covers - Stake Pocket Cutouts # P59914 are sold as a pair of two protective covers. This pair is confirmed to fit the 2007 Dodge Ram 1500, 2500, and 3500 with the 8 foot bed. view full answer...
I spoke with my contact at Putco and he told me the diameter of the Putco SSR Locker Truck Bed Side Rails, part # P79829, is 1-3/4 inches. For a donut adapter you will want to use part # P820175. Just attach these adapters to the front of your toolbox, cut down your rails, and mount the rails to the adapters.
I have included installation instructions for these parts for you to check out. view full answer...
The Putco Polished Stainless Locker Truck Bed Side Rail you mentioned, part # P99862 will indeed fit the 2012 Ram Laramie Big Horn Crew Cab with the 5-1/2 foot bed. It will fit models without the Ram Box.
For installation details, click the provided link. view full answer...
The Putco Locker Truck Bed Side Rails # P89896 are confirmed to fit your 2017 Chevrolet Silverado 2500 HD 6-1/2' bed. The bars have a diameter of 1-3/4" and the bars do not overhang over the bed itself or outside of the bed rails. There is not a matching bar for the tailgate unfortunately, but I did find a nice stainless steel tailgate cover that you could look into to prevent your tailgate from getting scratched / damaged: Access Tailgate Protector # A27020309. view full answer...
We do indeed have some stainless steel tailgate protectors available for certain, but not all model years of he F150.
For 1987-1996 models, use # P59114
2000-2003 models, use # P59117
2004-2008 models, use # P59123
view full answer...
The Husky Liners bed rail caps you referenced, part # HL97101 are indeed a fit for your Silverado. The caps easily install without drilling, and feature removable caps to reveal the stake pockets. view full answer...
The DeeZee Brite-Tread Wrap Side Bed Caps w/Stake Holes, part # DZ11982, will be the part you will need for your 2011 Chevy Silverado Crew Cab.
The DeeZee Brite-Tread Wrap Side Bed Caps w/Stake Holes, part # DZ11994, will NOT fit a 2011 Chevrolet Silverado.
view full answer...
The Stainless Steel Putco Tailgate Cap # P51610P that you referenced is for a 1967 - 1972 GM pickup. For your 2000 Chevy S-10 you need the Stainless Steel Putco Tailgate Cap # P51622P instead.
Attached is a link to all of the other trim pieces that we have for a 2000 Chevy S-10 that you can check out. view full answer...
If you are referring to the Putco Truck Bed Rail Protective Skins part # P59585 which are a fit for your 2008 Ford F-150 with the 6-1/2' bed then these install via double sided tape which means no drilling or cutting is required. view full answer...
We do have the components you are looking for on your 1996 Dodge Ram 1500 short bed, however there isn't anything available in aluminum diamond plate.
The best options we have available for your truck are the Putco Full-Coverage Front-of-Bed Protector # P59122 and the Full-Coverage Tailgate Protector # P59118, both of which feature a stainless steel construction that will be completely resistant to rust and corrosion.
There aren't any standard side rail caps available but we do have... view full answer...