View Cart

Filter Questions and Answers:

reset filter

Expert Answers about Trailer Fenders


  • Replacement Jeep-Style Fender for a Trailer with 15 Inch Wheels
  • We have several Jeep-style fenders that will fit 15 inch trailer wheels and that you can bolt on. For plain steel fender you can use # J101936. It can be bolted on or welded on. Holes will need to be drilled to bolt it on like your existing fenders. This fender is 10 inches wide 33 inches long and 17 inches tall. We also have # J101733AT which is 10 inches wide, 33 inches long, and 17 inches tall. it can be bolted on as well but would require drilling holes. And finally we have a...
    view full answer...

  • How are Fulton Trailer Fenders # F008554 Mounted Typically
  • The Fulton fenders part # F008554 are universal in that they can mount a number of ways depending on the trailer. I attached a picture that shows a very common way. Or you can use L-brackets like part # PF775-BKT-2 which are commonly used as well.
    view full answer...

  • How to Install the Fulton Single Axle Trailer Fender on a Tow Dolly
  • The Fulton Single Axle Trailer Fender with Top Step # F008554 is designed to fit tire on a 14 inch wheel. The dimensions are: 9.7" wide x 31.3" long x 12.75" tall. The top step is 8 inches wide and it has a capacity of 300 lbs. You can attach it to your tow dolly using brackets, like part # PF775-BKT-2, or you can simply bolt it straight onto your tow dolly if you have the space to do so. I have attached a picture that a customer sent in where they installed it using the second option. If...
    view full answer...

  • How To Measure a Boat Trailer Fender Without Removing the Wheel
  • I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram that should be helpful. You already know how to measure the width. To get the length it is easiest to tape a piece of stiff paper to the end of each fender edge that will protrude past the wheel. Then measure between the papers. For the height, you can...
    view full answer...

  • Fender Kit Recommendation for Shoreland'r Trailer with 14 inch Trailer Wheels
  • For a Shoreland'r style trailer fender for a 14 inch trailer wheel like the size 215/75-14 that you mentioned we have the CE Smith fender kit part # CE19504-2 which would fit and work well.
    view full answer...

  • Measuring to Determine Correct Replacement Trailer Fender Size
  • The Fulton Single Axle Trailer Fender # F008583 also comes in white, # F008573 and silver, # F008593. The mounting bracket slots are 28 inches apart inside to inside. This measurement will matter more than the overall length of 40 inches. If you find you need the larger size for 14 inch rims the parts are: Black # F008584-2 White # F008574-2 Silver # F008594-2 The fenders for 14 inch rims are sold as a pair. The mounting brackets are spaced 30-1/4 inches apart inside to inside.
    view full answer...

  • Replacement Fenders Needed for a 13" Wheel on a Tracker Trailstar Boat Trailer
  • We do have a selection of fenders for 13" wheels that you can use to replace your current fenders. Among our linked selection we have different constructions like aluminum, plastic, and steel. These fenders can mount via brackets or welding depending on the style. From the pictures you sent in (thank you by the way) it looks like your current fenders are steel and have a step. The only fenders that we carry which have a step are our plastic ones. We have the CE Smith Fender # CE19503...
    view full answer...

  • Recommended Fenders for Size 205/65-10 Tires on Trailer
  • With a tire width of 8.3 inches, it is wise to use a wider fender like the Single Axle Trailer Fender - Jeep Style # CE18041ATB which is 10 inches wide to give you that slightly wider protection. That will help shield your tire and protect your trailer from road debris. The single axle fender # J10821 which are also 10 inches wide. I recommend the wider coverage as tires expand a little when hot due to both road friction and ambient temperature. You do not want a fender narrower...
    view full answer...

  • Brackets Needed to Mount Fulton Single Axle Trailer Fenders with Top and Side Steps F008584-2
  • You will need 4 of bracket # PF1135-BKT to mount fenders # F008584-2. Because your frame is so narrow you will need to drill a hole in each bracket to accept u-bolts that fit around your frame. We do have some 1-1/2 inch wide, 5 inch long u-bolts you could use, # SP01-120, sold as a pair. You would need 2 pair. If you don't mind drilling into the trailer frame you could also use # PF775-BKT-2 and place them wherever you can on both the fender and the trailer. You would need 2 pairs of...
    view full answer...

  • How To Bolt-On, Weld On Trailer Fenders
  • Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part # F1075X32-1R you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part # CE26098G-2. If you do not have a 14" or 15" wheel, you will need to match the correct the trailer fenders to your wheel size in addition to matching the mounting bracket to your trailer fenders. Unfortunately, the only trailer fenders we sell that have a step...
    view full answer...

  • Replacement Fender for 1990s Shorelandr Trailer
  • The closest fender option we have available to the dimensions you provided is the Fulton Single Axle Trailer Fender - Silver # F008593. This model is also available in Black # F008583 and White # F008573. This high-density polyethylene fender measures 40 inches long, 9 inches wide, and 12 inches tall. There is a distance of 28 inches between the mounting bracket slots, inside to inside. It does feature a front, rear, and top step, along with a built-in fender skirt. I have attached...
    view full answer...

  • Trailer Fender for Boat Trailer with 14 Inch Wheels
  • The most important measurement is the mounting bracket slots and the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 fit 14 inch wheels and measures 30-1/4 inches from inside to inside for the mounting brackets, which do not come with the fenders and you would need to fabricate. I have added a cutout showing all of the dimensions of these fenders so you can see if they will work for you, as they are the closest we have to the measurements you provided. I have...
    view full answer...

  • Mounting Bracket Recommendation for Use with Fulton Trailer Fender # F008563
  • The brackets we recommend for use with the Fulton trailer fenders part # F008563 are the CE Smith brackets # CE26098G-2.I attached a picture that shows how these brackets normally hold fenders on. Essentially you put the L up into the top of the inside of the fender on the side that attaches to the trailer and then you attach it to the trailer accordingly.
    view full answer...

  • Aluminum Trailer Fender that is Approximately 12 Inches Wide, 35 Inches Long, and 15 Inches Tall
  • The closest to a match to your specifications that we have is fender # CE17100ATB. But it is 32" long x 10" wide x 16" tall. We have a steel option that is closer, # F13X36-1R, which is 36" long x 13" wide x 20" tall. This is the best option. I have linked a video review of this fender for you.
    view full answer...

  • Mounting Brackets for Fulton Plastic Trailer Fender # F008559
  • There is a specific set of brackets that go with Fulton trailer fender # F008559 but probably the most popular option is set # CE26061G-2 which are for 8 to 12 inch wheels which matches what the fender was designed for.
    view full answer...

  • Mounting Hole Dimensions of CE Smith 12" and 13" Plastic Single Axle Fenders
  • I went out to our warehouse to take a look at both the CE Smith Single Axle Trailer Fenders - 12" Grey # CE19502-2 and the larger 13" Black # CE19503-2. Both options represent the only color available from CE Smith in the respective sizes. For the 12" # CE19502-2 I measured a distance between the two outside mounting holes, on center, of 31 inches. The distance between the two inside holes is 27 inches. On each mounting surface the holes are spaced apart 4 inches vertically and 2 inches...
    view full answer...

  • Replacement Fenders for 2011 Forest River R-Pod RP-177 Travel Trailer
  • We do offer many styles of replacement trailer fenders in plastic, steel and aluminum that you can check out on the page I linked for you. To start, click on your wheel diameter. I reviewed many photos of the 2011 RP-177 and it appears that the steel fender part # F775X28-1RWB which fits 13-inch and 14-inch wheels is a good match. This has no lighting/wiring, please note. It measures 28L x 10H x 7-3/4W. The other closest match is part # CE17920 which measures 28-1/2L x 13H x 9W. All...
    view full answer...

  • Fenders Needed for 265/40/22 Size Tires on a BBQ Trailer
  • The only fenders that we carry which are compatible with a 22" size tire are the Flexy Flare fenders from Phoenix USA. These come in the following lengths and widths: 12" Long x 2-1/4" Wide - # PX52-191 12" Long x 4-1/2" Wide - # PX52-172PF 58" Long x 2-1/4" Wide - # PX52-170 61" Long x 2" Wide - # PX52-188
    view full answer...

  • Can Weld On Trailer Fenders be Bolted On
  • Yes you certainly can. In order to bolt-on a set of metal weld-on fenders such as the Single Axle Trailer Fender part # F1075X32-1R you will need a set of mounting brackets such as the Mounting Brackets for Trailer Fender part # CE26098G-2. If you do not have a 14" or 15" wheel, you will need to match the correct the trailer fenders to your wheel size in addition to matching the mounting bracket to your trailer fenders.
    view full answer...

  • Could Single Axle Trailer Fender # CE18041ATB be Reinforced to Support Weight
  • If you used strong enough brackets when installing the Single Axle Trailer Fender # CE18041ATB they'd be strong enough to support people of all shapes and sizes. These don't have a specific weight capacity but they are pretty strong. Normally we recommend the brackets part # CE26098G-2 for each fender installed like the picture I attached. You might install several of these brackets.
    view full answer...

  • 13 Trailer Fender Replacement with Backing
  • The closest match we have is the part # F775X28-1RWB. This fender is 7-3/4" Wide x 28" long x 10" tall and has a back.
    view full answer...

  • Availability of Mounting Brackets for Fulton # F008595-2 Fenders
  • We do indeed have brackets that would work for the Fulton # F008595-2 fenders, part # PF1135-BKT-2. Each set includes two brackets. I've provided a photo showing how the brackets work.
    view full answer...

  • Mounting Instructions for Redline # PF11X35W-2 Fenders
  • I do not have instructions, but I can explain how the fender brackets are used. The mounting brackets slide into the underside of the step on either side of the fender with the open end of the bracket facing downward. The fender secures to the bracket by running a bolt (not included) through existing holes in the fender into holes in the bracket. The flat top edge of the bracket attaches to the underside of the trailer frame using U-bolts that are not included. We offer two suitable...
    view full answer...

  • Trailer Fender Recommendation for Boat Trailer with 13 inch Diameter Wheels
  • For a 13 inch wheel and tire like the part # AM31242 that you referenced. The Fulton single axle trailer fender part # F008583 that you also mentioned would work well as it was designed for the tire diameter that you are going to go with. I attached a picture that shows this fender installed on a boat trailer with a similar tire size as what you have. If you need mounting brackets as well you'd then want the part # CE26061G-2 for a set for each side of the trailer.
    view full answer...

  • Mounting Brackets For Fulton Plastic Fender # F008559
  • The Fulton Plastic Fender, part # F008559, does not include mounting hardware. The Fulton fender is designed to be mounted with your existing hardware, or with brackets designed that are specific to the trailer frame on which they are to be installed. I have linked all the trailer fender mounting hardware that we have available. You will need to determine the mounting location and style of bracket that will work on your trailer. You can also fabricate mounting brackets for the Fulton...
    view full answer...

  • Availability of Fulton Trailer Fenders for 15 Inch Wheels with Top Step Only
  • Fulton does make a black plastic fender, part # F008585, that will accommodate 15 inch tires, however it does not come with only the top step. Fulton does make a black plastic Trailer Fender with Top Step only for 14 inch wheels, part # F008554. It may be possible to use the 14 inch model. You would have to go by the dimensions which I have included in the pictures at right. Also check out the video review of this fender which I have included for you.
    view full answer...

  • How to Support the Step of a Plastic Trailer Fender
  • We typically recommend the part # PF775-BKT-2 as a way to support the steps of a plastic fender like your # F008575. I attached a picture that shows how they would be used.
    view full answer...

  • How to Mount a Fulton Plastic Trailer Fender to a Trailer
  • You can use the hardware and mounting brackets from your original fenders, or I recommend L-shaped brackets, like part # PF775-BKT-2, to mount the fender to your trailers frame. I have attached a link to our product page of mounting brackets we have for trailer fenders. I recommend the L brackets. The one end would be up underneath and the other end would attach to the trailer frame through that skirt. I will include a picture that should better illustrate this.
    view full answer...

  • Steel Trailer Fender with Backing Plate That is 9-Inches Wide
  • The Redline Steel Trailer Fender with Backing Plate # F775X28-1RWB is 7-3/4-inches wide as you noted. The similar fender # F9X32-1RWB also has a backing plate and is 9-inches wide, but please note it is also longer and taller. Overall dimensions are 9 Wide x 32 long x 15 tall and this weld-on fender is typically used with 14-inch and 15-inch wheels. We also offer trailer fenders made of high-strength plastic and others made of aluminum and all of these items appear on the page I...
    view full answer...

  • Comparing the Redline # PF775X21W and Fulton # F008549 Fenders for 8
  • Aside from the mounting holes being different, because the Fulton is 2 inches longer, the only other difference between the Redline # PF775X21W and the Fulton # F008549 fenders is that the Fulton version has a step that can hold up to 300 lbs. They both are White and made from a plastic that is durable and will resist corrosion much better than a steel option. You are correct that Fulton does not offer a design that fits the exact same mounting holes as the Redline version so if you...
    view full answer...

  • Solution for Needing Replacement Fenders for Jeep Offroad Pop Up Trailer
  • I looked up pictures of your trailer and unfortunately we do not have anything that is an exact match but we do have Jeep style fenders like the diamond plate part # CE18041ATB which would work well. I attached a picture of the fenders installed on a similar Jeep style trailer as yours for you to check out as well.
    view full answer...

  • Replacement Fender Recommendation for Boston Whaler Boat Trailer
  • The CE Smith Single Axle Trailer Fenders w/ Top and Side Steps # CE19502-2 would work well for you. They are 37 inches long like you need and the mounting brackets cut outs are compatible with 32 inch wide brackets like what you have as well.
    view full answer...

  • Trailer Fender Recommendation to Replace a 10 X 33 X 17 Fender
  • For a metal fender pretty close to the dimensions you listed check out the Single Axle Trailer Fender # F1075X32-1R. The dimensions of this fender are 10-3/4" wide x 32" long x 15-1/4" tall. I attached a review video for this fender for you to check out as well.
    view full answer...

  • Bracket to Use with CE-Smith Fender CE19504-2
  • The bracket that will work best for your trailer and the fender part # CE19504-2 that you referenced will vary based on your trailer, but the part # CE26098G is an L-bracket that works best for most people who buy this fender. The dimensions are 6-1/2" wide x 8-1/4" tall.
    view full answer...

  • Dimension of Mounting Hole on Redline Trailer Fender # PF11X35W
  • I was able to go out to the warehouse and measure the mounting brackets holes for the PF11X35W and found that it was 5-5/16 inches or 5.3125 inches. If these aren't an exact match, new holes can usually be drilled into the brackets to make them compatible. The recommended bracket for this fender is the # PF1135-BKT, this bracket works well for mounting fenders to a boat or other open sided trailer. The brackets use u-bolts to attach to the trailer frame and then the fenders mount to...
    view full answer...

  • Recommended Fenders for 13 inch Trailer Wheels
  • We have a large selection of trailer fenders that are designed to fit 13 inch wheels like those on your newly obtained and cost-friendly trailer. I have attached a link that will take you to our available selection that will work on your trailer for you to look through. You will simply look for a style or color based on your personal preference. If you are needing to match a fender that is already installed on the trailer, you can check the pictures as well as the listed dimensions...
    view full answer...

  • Recommended Plastic Fender for 14 Inch Wheel and Tail Lights
  • We have white plastic fenders that will fit your 14 inch wheel. I recommend the Plastic, Single-Axle Trailer Fender w/ Top and Side Steps # PF11X35W. If you want matching fenders, then you want # PF11X35W-2. If you need the mounting brackets, I recommend the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender # PF1135-BKT-2. These don't have the integrated lights, but trailer lights are an easy addition. I recommend the Miro-Flex LED Trailer Tail Lights...
    view full answer...

  • Differences Between Fulton Plastic Single-Axle Trailer Fender # F008572 and # F008554
  • The Fulton Single Axle White Plastic Trailer Fender with Top and Side Steps # F008572 that you referenced is intended for trailers that use 12-inch diameter wheels. This USA-made fender has a 300-lb weight capacity. The other fender you referenced, the black plastic Fulton Single Axle Trailer Fender with Top Step # F008554, has a single top step and is intended for single-axle trailers with 14-inch wheels. I have included a link to our main page for bracket-mount fenders for single-axle...
    view full answer...

  • Fender Back for the Trailer Fender # F1075x32-1R
  • Yes, you could use a Pre-Cut Fender Back for Redneck Trailer Fender, part # 10FB-32R with the # F1075X32-1R. Or if you wanted a fender back that is slightly wider you could get a Pre-Cut Fender Back for Redneck Trailer Fender, part # 12FB-32R.
    view full answer...

  • Are Fulton and CE Smith Trailer Fenders Comparable
  • There is a slight difference in the designs of the Fulton fender # F008584 and the CE Smith Fender # CE19504 but other than appearance there isn't a whole lot of difference. I have stood on a Fulton fender before and it did flex but it didn't feel like it was overly stressed or that it would break. I have not stood on a CE Smith fender.
    view full answer...

  • Mounting Fenders for 1997 Shorelander Boat Trailer
  • The fender you mentioned, part # F008564 does not have a specific mounting bracket. The bracket needed will depend on your trailer frame and where the fender would sit on the trailer. You might even be able to re use your existing brackets. To see all of our fender mounting brackets, click on the provided link. We do have fender designed for a 14 inch wheel with mounting system that works very well. Take a look at part # F008594-2 and bracket # PF1135-BKT-2 (two brackets needed per...
    view full answer...

  • Dimensions for Portions of Redline Trailer Fenders
  • I went out to the warehouse and pulled the two fenders and took the measurements you requested of each one. The dimensions of the Redline Trailer Fender # J8824 from the side starting from the ground straight up to the midpoint of the radius measures 15 inches. The dimension for the top from the midpoint of the radius (both sides) is 7 1/2 inches. The dimensions of the Redline Trailer Fender # J101936 from the side starting from the ground straight up to the midpoint of the radius...
    view full answer...

  • What are the Dimensions of Fulton Plastic Trailer Fender # F008584 and # F008585
  • I would be happy to provide the dimensions for the Fulton Plastic Fender, # F008584 and # F008585. I have actually made a picture showing the dimensions for you.
    view full answer...

  • Trailer Fender Recommendation Wide Enough for 20.5X8.0-10 Tires
  • Your 20.5x8-10 tires are right at 8 inches in width. The Fulton Single Axle Trailer Fender part # F008553 is 9 inches wide so it should have plenty of width for your tires.
    view full answer...

  • 13 inch Wide Trailer Fender Recommendation
  • Check out the Redline Trailer Fenders part # F13X36-1R. The dimensions of this fender are 13 inches wide by 36 inches long and 20 inches tall. Its a different shape than the Redline Fender # J101936 that you referenced but it is very close to the specs that you need.
    view full answer...

  • Wider Fender Recommendation for Fitting Trailer with Longer Axle
  • Most likely you'd have to get a bit creative with L-brackets like part # PF775-BKT-2 to install the Fulton Fenders part # F008564 that you referenced. It's hard to say exactly how you would do it, but the L-brackets should be able to fit on the current angled brackets I see in the picture you submitted.
    view full answer...

  • Fenders for 14 Diameter Wheels on Boat Trailer
  • Since you have 14" diameter wheels you will want to use the CE Smith Single Axle Trailer Fenders # CE19504-2 that are designed for that size and have an inside length of 29-11/16". These fenders allow you to use your existing mounting brackets at the 32" measurement you took or you can drill your own and use Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels # CE26098G-2; the CE Smith fenders are going to require drilling and will fit your current trailer. I've added links to video...
    view full answer...

  • Trailer Fender with Lights Recommendation
  • You could likely cut out light holes on fender # F008575 if you wanted to. Using a rotary tool would make it quick and easy. Or you could mount left fender light # BA44FNL and right fender light # BA44FNR on the fenders. Fenders with pre-cut light holes are not available from us.
    view full answer...

  • Availability of Mounting Brackets for Fulton Trailer Fender # F008572
  • Although not an exact match, the part # PF1135-BKT-2 brackets would work well for mounting the fenders onto a boat or other open sided trailer. The brackets use U-bolts that attach to the trailer frame, the fenders then mount to the brackets as shown in the photo I provided. The holes in the bracket do not match up with the mounting holes in the fender, but new holes could easily be added to the bracket. The brackets are sold two to a set. For two fenders, you would need two sets.
    view full answer...

  • Replacement White Fender for a 2000 Shorlandr Profile
  • You will want to base your replacement fender off of the size of your wheel. From the picture that you sent in it looks like you have a 14 inch wheel. For that I recommend going with the Fulton Single Axle Trailer Fender with Top and Side Steps # F008574. This is a white, plastic fender that has steps and is compatible with your 14 inch wheel. It has a 300-lb weight capacity and comes with a 5-year limited warranty. If you would like to replace both fenders so that they match then...
    view full answer...

  • Can I Use 15 Inch Wheels Instead Of 14 Inch If I Have Clearance On MY Pacific Coach Works Trailer?
  • It sounds like you will have the clearance to allow you to go with the slightly larger tire when your trailer is sitting, however you will have to consider how much your suspension moves and the travel distance required for you suspension to work correctly. If you you determine you have enough space, a slightly larger tire will disperse heat differently. You could use a combination like the Provider ST205/75R15 Radial Tire w 15" Viking Aluminum Wheel # A15R45BMMFL to have a nice tire...
    view full answer...

  • Trailer Fender with Lights for Trailer with 14 Inch Wheels
  • We have a lot of fenders that will fit 14 inch wheels, see link. Even though they do not come with lights you can add lights to them. For example take a look at these fender lights with both red and amber lights: # MCL12ARLB and # MCL12ARRB # BA44FNR and # BA44FNL # DG52444VP and # DG52443VP # 54201-013 and # 54201-011
    view full answer...

  • Plastic Fender Recommendation for Shorelander Trailer with 14 inch Wheels
  • It looks like the closest fender we have that should work well would be the part # F008574. If you check out the dimension picture that I attached you will see that the mounting bracket dimensions for this fender should match up well.
    view full answer...

  • Brackets for Attaching the Fulton Plastic Fender with Top Step # F008549
  • Attachment of the fenders to your trailer will depend on your trailer construction. We have several styles of galvanized brackets that you can use to attach fenders to a trailer frame. We have L brackets like the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender, item # PF775-BKT-2, and we have galvanized U-brackets like the Galvanized Steel, U-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender, item # PF1135-BKT-2. One of these styles should work for...
    view full answer...

  • Mounting Option for the CE Smith Single Axle Trailer Fender # CE17960ATB
  • I would not recommend mounting the CE Smith Single Axle Fender, # CE17960ATB, by screwing through the lip. You will have less than 1/2 of an inch from the bottom edge of the lip to the curve. This would not leave enough room for a washer to spread out the force of the bolt on the fender. Instead, I recommend using trailer fender mounting brackets like part # CE26098G-2. These mounting brackets have 3/8 inch diameter mounting holes, so you will want to choose your mounting hardware accordingl...
    view full answer...

  • Availability of Fender Back Plate for 32 Inch Long Fender
  • We offer 2 options for fender back plates. For a back plate closest to the measurements you provided, the Pre-Cut Fender Back # 10FB-32R measures 10-1/2 inches wide x 29-3/4 inches long. This fender back is designed to fit the Redline Fender # F9X32-1R. For a wider fender back, the # 12FB-32R measures 12 inches wide x 30 inches long. This fender back is also designed for the # F9X32-1R fender. Either of these fender backs will also work in a 10-3/4 inches wide x 32 inches long fender...
    view full answer...

  • Replacement Fenders Needed for Dual Axle Trailer
  • We do have replacement white fenders but our fenders are typically for single axles and come with either a single step on the top, a top step as well as side steps, or no step. If you let me know the size of your wheels and the dimensions of your fenders I can see if we have a replacement for you. For example, the Fulton Single Axle Trailer Fender # F008542 is a white plastic fender with one step on the top. It is compatible with 12" wheels and measures 7-1/2" Wide x 23-11/16" long x...
    view full answer...

  • Do You Carry a Black Fulton Plastic Fender for 15 Inch Tires
  • Yes, Fulton does make a black plastic fender, part # F008585 that will accommodate 15 inch tires. We carry it on our site and I have added a link to it below. It measures 40 inches long, 12 inches tall and 9 inches wide.
    view full answer...

  • Replacement Black Plastic Fender for a Bear Trailer with 14 Inch Wheels
  • Fender # F008584 seems to be the best option for you. It is designed for 14 inch wheels. It can be used on the left or right side of the trailer, and it measures 9-5/8" wide x 42-5/8" long x 12-3/4" tall. The mounting bracket slots are 30-1/4 inches apart so you may need to do a little bracket modification to get it to fit the existing brackets.
    view full answer...

  • Recommended Trailer Fender with Step On Front and Back Side That Bolt Onto Aluminum Trailer
  • It sounds like you want a fender like the Fulton Single Axle Trailer Fender with Top and Side Steps - Black Plastic - 13" Wheels - Qty 1 # F008583. This fender has 28 inches between the mounting bracket slots. If you move up to the 14 inch wheel version # F008584 the measurement between bracket slots is 30-1/4 inches. These are available in different colors. You can use bolt on brackets like # PF775-BKT-2 to mount them.
    view full answer...

  • Can the Single Axle Steel Fender # F775X28-1R Be Mounted Using Brackets Instead of Welding On
  • The Redline Single Axle Trailer Fender - 16 Gauge Steel - 13" to 14" Wheels, # F775X28-1R, can be either welded on or bolted on to a trailer. For mounting brackets to mount to your trailer, I recommend the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2, # CE26098G-2. These brackets will allow you to mount one fender to your trailer. Both brackets will be needed to mount one fender. The brackets, like the fender, are made of galvanized steel for...
    view full answer...

  • Can you Mount the Fulton Single Axle Trailer Without Drilling?
  • We do offer options for you to add trailer fenders without drilling, but the Fulton Single Axle Trailer Fender, # F008585, would need to be mounted by using the hardware from your previous fenders or mounting brackets such as # CE26098G-2. To add fenders without drilling, you would need weld-on fenders such as the 16 Gauge Steel Fender, # F9X32-1RWB. It is 9 inches wide x 32 inches long x 15 inches tall, and like the Fulton is made for single-axle trailers for wheels that are 14 inches...
    view full answer...

  • What are the Dimensions of the Single Axle Jeep Style Trailer Fender J101733AT
  • I have included a drawing of the dimensions of the single axle fender # J101733AT. The overall dimensions are 33 inches long, 17 inches tall, and 10 inches wide.
    view full answer...

  • Trailer Fender Needed for a Shorelander Trailer with 215/75R14 Size Tires
  • All of our fenders are universal fits so we don't have any that are specifically made for a Shorelander trailer, but we do have some that are made for 14" wheels. For example, we have the Fulton Single Axle Trailer Fender # F008554 that has a top step, or we have the Fulton Single Axle Trailer Fenders # F008584-2 which have top and side steps. The dimensions for both types of fenders can be found on their product pages. If you send me the dimensions of your current fenders I can see...
    view full answer...

  • How Much Space is Needed for Tires When Building a Trailer
  • We recommend at least 3-1/2 to 4-1/2 inches between the tire tread and the underside of the fenders (Or the floor if your wheels are directly underneath.). This gives you plenty of room for travel in the trailer's supsension. You also want to keep at least an inch or two between the tire's sidewall and any part of the trailer. As well as at least 2 to 4 inches in between the two tires. I've linked a help article on axle placement for you to take a look at as well. It lays out some...
    view full answer...

  • Replacement Fender for 2009 Yacht Club Galvanized Trailer
  • Unfortunately your photos did not come through. I can help you with a single tire fender, but we don't carry any tandem axle fenders. It sounds like you are looking for galvanized steel fenders, so here are those options: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel--- 8" Wheels # CE17700G 12" Wheels # CE17701G 13" Wheels # CE17800G 14" and 15" Wheels # CE17900G 15" Wheels # CE17937G Then we have the Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels -...
    view full answer...

  • How to Mount a Fulton Black Plastic Trailer Fender for 14 Inch Tires
  • The great thing about the plastic fenders like # F008554 is that because they require the user to determine the best method of mounting them, you can attach them to the trailer based on what you have available. You can add brackets # PF775-BKT-2 if needed but ultimately as long as they are properly secured it is up to you. You may need to relocate or bend the lower bracket somewhat though based on the measurements of the fender.
    view full answer...

  • Do I Need Mounting Brackets for Fulton Plastic Trailer Fender with Top and Side Steps
  • Yes, the Fulton Plastic Fenders, item # F008593, will require a mounting bracket. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use L brackets to mount the fender to your trailers frame. These fenders can be painted but will require surface preparation for the paint to adhere. The paint used will need to be a flexible bumper style paint so that flexing and movement of the polyethylene material does not cause the...
    view full answer...

  • How Does the Fulton Single Axle Fender part # F008554 Install on a Trailer
  • There are no mounting slots on the Fulton Single Axle fender part # F008554. The underside of the fender is basically the opposite of what the top of the fender looks like. The easiest way to install this fend would be to drill through the side skirt of the fender and use carriage bolts to attach the fender to the frame of your trailer. But honestly you can install them however you like. I attached a picture we got from a customer that shows how he installed this fender on his trailer.
    view full answer...

  • Compatibility of Fulton White Plastic Fender # F008573 with 175/80-13 Tire
  • The Fulton White Plastic Trailer Fender you mentioned, part # F008573 is indeed compatible with 13 inch wheels. The fender measures a total of 40 inches long (including the steps), 9 inches wide and 12 inches tall. If you click the link I've provided for you, you can view a product demonstration video.
    view full answer...

  • Availability of Replacement Trailer Fenders with Light Cut-Outs
  • All of the steel, aluminum and plastic trailer replacement fenders we offer are made to be as universally usable as possible. For this reason they do not include special features like light cut-outs. The Fulton fender # F008594 is made of high-density polyethylene plastic that has can be drilled or cut to allow light installation. All of our trailer fenders can be viewed on the linked page. I also linked our main page for trailer lights.
    view full answer...

  • What is Recommended Distance Between Trailer Fender and Tires
  • Generally speaking you will want to have 3 inches from the top of your tire to the fender of your trailer to accommodate for suspension travel. Having a little more wouldn't hurt, but I wouldn't recommend any less than 3 inches.
    view full answer...

  • Replacement White Plastic Fenders with Steps for 1997 EZ-Loader Boat Trailer
  • We won't have an exact OEM fender part for your 1997 EZ-Loader boat trailer but we do offer a range of general purpose trailer fenders in plastic, aluminum and steel. I linked for you just the plastic fenders we have for 14-inch wheels and the best match appears to be item # PF11X35W-2. This USA-made fender kit include two fenders and four mounting brackets, as shown in the linked video. These include top and side steps.
    view full answer...

  • How to Mount a Fulton Plastic Fender # F008553 To a Trailer To Support Weight of Stepping On It
  • The Fulton Plastic Fender with Top Step, part # F008553, does not come with mounting hardware. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use the Redline Galvanized Steel, L-Shaped, Bolt-On Brackets, part # PF775-BKT-2. See picture to the right that will show the underside of the fender with the brackets to give an idea of how to mount it to your trailer. I would recommend to install the fender with L-shaped...
    view full answer...

  • Is Replacement Black Fender Available for Yacht Club Jetski Trailer WC218
  • To determine which replacement fender is needed for your Yacht Club Jetski Trailer WC218, you'll want to measure the overall length of your current fenders. I have included a link to all of our black trailer fenders for you. From there you can narrow the search by using the filters on the page. For example, if your current fenders measure 42-5/8 inches long Fulton Single Axle Trailer Fender, # F008584, would be a good option. Unfortunately a collective OEM trailer parts catalog does...
    view full answer...

  • Replacement Fender for Shorelander Trailer with Single Axle, 13 Inch Wheels
  • For a fender like you described, you will want to use the Fulton Single Axle Trailer Fender with Top Step # F008553. This fender is designed to work with 13 inch wheels like those on your trailer. The # F008553 fender is made of black plastic and will provide you with a step on top of the fender. This fender is designed to be mounted with brackets like # PF775-BKT-2. I have attached a chart showing the measurements for this fender, as well as a review video of the fender. We do not...
    view full answer...

  • Does Fulton Plastic Fender with Top and Side Steps, # F008595, Fit Both the Left and Right Sides
  • The Fulton Plastic Fender with Top and Side Steps, # F008595, is sold as a single unit. It fits the left or right side. The holes you are seeing in the pictures are not light mounting holes but mounting holes for the fender itself. For a set of 2 you would use # F008595-2.
    view full answer...

  • Trailer Fender Recommendation for Tire Size 31x10.50R15
  • Probably our best option would be the trailer fender part # F13X36-1R which is 13 inches wide and 36 inches long. This would easily accomodate a tire that is 31 inches in diameter and 10.5 inches wide.
    view full answer...

  • Availability of 11 x 32 x 15 Inch Fenders for Single-AxleTrailer
  • We can come pretty close to those measurements, assuming that the 11x32x15 you stated meant 11 inches wide, 32 inches long and 15 inches tall. The fender you were looking at would work for you, but the Redline 16 Gauge Steel Single Axle Trailer Fender, part # F1075X32-1R measures 10-3/4 inches wide, 32 inches long and 15-1/4 inches tall and would come closer to the measurements you provided. These would work well for replacing your current fenders.
    view full answer...

  • Availability of Jeep Style Fender Measuring 10 Inch Wide x 36 Inch Long x 19-1/4 Inch Tall
  • The closest Jeep style fender we are going to have is trailer fender part # J101936. This fender is for single-axle trailers with 13" - 15" diameter wheels and measures 10" wide x 36" long x 19-1/4" tall. For an aluminum tread plate fender see # CE18041ATB. I have included a video review of this fender for you to check out.
    view full answer...

  • How are Trailer Fenders CE18041ATB Normally Installed on Trailer
  • The mounting brackets that are most commonly used with the Fender part # CE18041ATB that you referenced is the part # CE26098G-2 which would work well. I attached a review video for more info for you to check out as well.
    view full answer...

  • Weld-On Steel Trailer Fenders to Fit 5.30 x 12 Trailer Tires
  • A trailer tire of size 5.30 x 12 has an overall diameter of right around 22-inches when mounted and fully inflated so you can refer to the linked page for trailer fenders that displays all 12-inch-wheel-compatible fenders made of steel that will weld on. We have rounded fenders in steel, such as # CE17720.
    view full answer...

  • Distance from the Midpoint of Curve to the Bottom of the Legs of a Redline Trailer Fender # J101936
  • I went out into our warehouse and measured a Redline Trailer Fender # J101936 and found that from the ground straight up to the midpoint of the radius it measures 17-3/4 inches and measured from where the leg touches the ground to the midpoint of the radius it measures 19 inches. Check out the pictures I attached to see these measurements.
    view full answer...

  • Availability of 33 Inch x 10 Inch x 18 Inch Trailer Fender
  • The closest trailer fender we have available to the dimensions you mentioned is a Jeep Style Fender like the Redline # J101733AT. This aluminum fender is 33 inches long, 10 inches wide and 17 inches tall. It is designed to fit with 13-15 inch wheels and can be installed as a bolt-on or weld-on application. For a standard fender, the closest option we have is the Redline Single Axle Fender # F9X32-1R. This is a 16-gauge steel fender that is 32 inches long, 9 inches wide, and 15 inches...
    view full answer...

  • Is Fulton Single Axle Trailer Fender with Top Step Available for 15 Inch Wheels?
  • There is a very similar fender available for your 15" diameter wheels, the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008585-2. As the title indicates, the difference between these is that they come with a side step as well as a top step. That comes in a pair, but they are available as a single unit # F008585, in white # F008575-2 and in gray # F008595-2. I've added links to video reviews of these fenders for you to take a look at.
    view full answer...

  • 2012 Yacht Club WC224 Trailer Fender Recommendation
  • I was able to pull up your 2012 WC224 trailer and found that it has 13 inch trailer wheels and has a fender that looks identical to the part # F008583. This fender would work well for you and would be what we recommend. I attached a review video for you to check out as well.
    view full answer...

  • Dimensions of Fulton Single Axle Trailer Fender # F008554
  • I pulled one of the Fulton Single Axle Trailer Fenders off the shelf in the warehouse and found that the distance from the bottom of the inside fender skirt to the top outside of the fender is right at 9-3/4 inches, as shown in the provided diagram.
    view full answer...

  • Recommendations for Brackets to Mount CE Smith Trailer Fenders # CE19504-2
  • For the set of CE Smith trailer fenders # CE19504-2 you can use existing brackets on the trailer or, if you need brackets, you can use # CE26098G-2. Drilling will be required for installation.
    view full answer...

  • Will Fulton Plastic Fender # F008554 for Single-Axle Trailers Fit 15-Inch Trailer Wheels
  • Since Fulton recommends their plastic fender # F008554 be used with 14-inch wheels I suggest that for your trailer that has 15-inch wheels you instead use their similar black plastic fender # F008585. This fender adds two side steps that are not included in the # F008554 and it is suited for your 15-inch wheels. If you need two you can instead order part # F008585-2, which is a set of two fenders that ship in one carton for reduced shipping costs. If you prefer to replace your fender...
    view full answer...

  • Trailer Fender Recommendation for 4 by 6 Cargo Trailer
  • For a metal trailer fender the part # CE17701G would be a great option for a smaller trailer like what you have. I attached a picture of what it looks like installed on a similar trailer. I also attached a review video for the fenders. For install brackets the part # CE26061G-2 would be a great option as well.
    view full answer...

  • Gray Plastic Fender Recommendation for a Trailer
  • Most likely the Fulton Single Axle Trailer Fender part # F008564 would work for you since you have 14 inch wheels, but if you measure and you need a larger D measurement you might also check out the Fulton Single Axle Trailer Fender # F008595 as it is designed for 15 inch wheels and is a little bit bigger. The # F008595 is also a plastic, gray fender with a top step.
    view full answer...

  • Replacement Bearings & Fenders for Yacht Club Dual PWC Trailer
  • Trailer makers rarely maintain detailed records for small items like bearings used in their trailers. I checked the Yacht Club website for bearing information for their PWC trailers but none is provided so your best bet is simply to pull one of the wheels/hubs and remove the bearings. You will find the bearing part numbers on the bearings themselves, as shown in the linked image. You can check for your bearing numbers on the linked page that displays all of our bearing kits, individual...
    view full answer...

  • Does the Fulton Plastic Fender with Top Step # F008554 Require Mounting Brackets
  • You will need to mount the Fulton Plastic Fender with Top Step, item # F008554, using existing mounting brackets or by making mounting brackets to mount the fender. We do carry fender mounting brackets for another style of fender that may work for you. The Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Trailer Fender PF775X21W (pair), item # PF775-BKT-2, is designed for use with the Plastic, Single-Axle Trailer Fender, item # PF775X21W, and does not include mounting...
    view full answer...

  • Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 Bracket Kit
  • The recommended mounting brackets for the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008574-2 that you referenced is the bracket kit part # CE26061G which we have found works well.
    view full answer...

  • Length of Wheel Well Opening for CE Smith Single Axle Trailer Fender w/Top and Side Steps 13
  • I went out to the warehouse to measure the CE Smith fenders # CE19503. The opening of the wheel well is approximately 27.5 inches long. I also took a picture of the underside for you.
    view full answer...

  • Trailer Fenders for Trailer With 15 Inch Wheels and 205/75 Tires
  • We have a great option for plastic fenders for your trailer with 15 inch wheels and 205/75-15 tires, the Fulton Single Axle Trailer Fenders with Top and Side Steps # F008585-2 (Black) or # F008595-2 (Silver). These fenders are designed for use with 15" wheels and in regards to width, a 205/75-15 tire will measure 8" wide and these fenders are 10-1/4" wide so they will be a great option so long as the mounting brackets will be able to span the wider stance of your tires. These fenders...
    view full answer...

  • Mounting Brackets for Fulton Plastic Trailer Fender # F008585
  • The Fulton trailer fenders do not come with mounting hardware. If you have hardware from previous fenders, you can re-use it or get some L-brackets like # CE26098G-2. The capacity is the max the fender can hold whether it be a person standing on it of if you were to place something on it temporarily.
    view full answer...

  • Replacement Fenders For 21 Ft EZ Loader Aluminum Trailer
  • I did some research and found that the number you furnished is a gray plastic fender that is for 14 inch tires. We do carry fenders that may work for you. I recommend the Fulton Single Axle Trailer Fender with Top Step, part # F008564. This is a silver plastic fender with a top step, and has no cut-outs. If you prefer the same fender but in black you can order part # F008554. I have attached a product review video for these fenders you can check out.
    view full answer...

  • Wide Fender Recommendation for Trailer with Tires Sized 33x10.5
  • We have a few wide trailer fender options that would work well. The widest being the part # F13X36-1R which is 13 inches wide and metal. This would probably be your best option. The part # CE19504-2 is 11 inches wide and is black plastic. The part # F1075X32-1R is 10-3/4 inches wide.
    view full answer...

  • Availability of Trailer Fender that Measures 32x10x15
  • The closest fender we have dimensionally to what you listed is the part # CE17100ATB which is a diamond plate fender that measures 32" Long x 10" wide x 16" tall. Typically this fender uses the mounting brackets part # CE26098G-2 which bolt to the fender and the trailer.
    view full answer...