Filter Questions and Answers:

reset filter

Expert Answers about Trailer Bearings Races Seals Caps


  • Can 1 Inch Trailer Hub Bearings Replace 1-1/16 Inch Bearings
  • If your existing hub uses 1-1/16 inch bearings, they will need to be replaced the exact same size bearings and races, # L44649, and # L44610. We also have the complete bearing kit available as part # BK1-150, which includes two 1-1/16 bearings and matching races, as well as a grease seal, cotter pin and EZ Lube spindle washer. Although one sixteenth of an inch may not seem like much of a difference, no parts are more critical for the dependable performance of your trailer than the bearings,...
    view full answer...

  • Which Bearing Kit Fits Dexter 7,000 lb Axle
  • Yes, the bearing kit part # BK3-210 does fit a good portion of the 7,000 lb Dexter axles out there, but some of the 7k Dexter axles require a slightly larger grease seal which instead requires the kit part # BK3-200. What you'll want to do is measure the spindle you have where the grease seal rides for it's outer diameter. If it's 2.125 inch you need the part # BK3-210. If instead it's 2.25 inch you'd need the part # BK3-200.
    view full answer...

  • Wheel Bearing Kit for Dexter 5 Lug Trailer with 3500-lb Axles
  • For your Dexter 3500-lb 5 Lug axles you will need # BK2-100 . This kit comes complete with all of the bearings and seals you need to replace on 1 hub.
    view full answer...

  • Replacement Bearing Kit With Seal for 7000 lb Lippert Axle
  • The Lippert 7,000 lb axles use a seal that is 2.250 inches inner diameter and 3.376 inches outer diameter. You will want Grease Seals 10-36 (pair) # RG06-070 for the replacements or complete bearing kit # BK3-200 which includes replacement bearings, races, and seal for each hub.
    view full answer...

  • How to Determine Correct Bearing Buddy for Trailer
  • It is really easy to determine which Bearing Buddies are the correct fit for your trailer, though we have no way to confirm a fit on any specific make or model, though I do appreciate the detailed info. For you to confirm the right Bearing Buddies all you need to do is measure the hub bores on your trailer's hubs using Digital Caliper # PTW80157 and match the hub bore diameter to the correct Bearing Buddies. Or if you let me know the outer bearing I can match its race, which will have the...
    view full answer...

  • Inner and Outer Bearing and Grease Seal for Older Trailer
  • We carry bearings, races and a seal that are very, very close to your measurements but not exact. For example, the inside bearing we carry is # L68149 and it has a 1.378" inner diameter; the correct race for this is # L68111. For the outer bearing we carry # L44649 which has a 1.063" inner diameter and the matching race is # L44610. Finally there is the grease seal, for which we carry # 58846 which has an inner diameter of 1.719". You could get all of these parts together...
    view full answer...

  • Replacement Hub Assembly for T.D.E. 11033
  • From what I was able to find out from my research, the Tie Down Engineering 11033 hub has a 5 on 4-1/2" bolt pattern and is designed for 3500-lb axles. Replacement hubs that have these specs typically use a # L68149 inner bearing and # L44649 outer bearing, as well as inner race # L68111 , outer race # L44610 and grease seals with inner diameter of 1.719" and outer diameter of 2.565". You'll want to verify that your current hubs have these bearings, races and seals to ensure that a...
    view full answer...

  • Replacement Bearings and Seal for Dexter 10k Trailer Hub
  • The bearings you need are # 387A for the inner bearing, # 25580 for the outer bearing, and for the seal # 10-51 since we know you have a 10k Dexter axle. For brake assemblies you'd need the part # 23-450 for the left hand side and part # 23-451 for the right hand side. For a hub you'd need # 8-430-5UC3.
    view full answer...

  • What is Difference Between Trailer Bearings L44649 vs L44643
  • The bearing part # L44649 has an inner diameter of 1.063 and is typically used in 3,500 lb axle hubs and the # L44643 has an inner diameter of 1 inch and is typically used on 2,000 lb axle hubs. If you can get me more info on your trailer like axle capacity and wheel bolt pattern I can help you pick out the components you are looking for.
    view full answer...

  • Correct Bearings and Grease Seal for Lippert 7,000 lb Axle
  • The bearing kit you need for your Lippert 7,000 lb axles is Bearing Kit # BK3-210. This kit contains the correct bearings, # 25580 and # 14125A as well as the matching races and grease seal # GS-2125DL.
    view full answer...

  • Replacement Bearings and Hub For 2007 EZ Loader Trailer Model With BT150A Oil Bath Hub
  • The EZ Loader with the BT150A Oil Bath hub uses a wheel bearing kit 300-020885 which includes wheel bearing part # L44649 for the inner and outer bearing, seal part # 34823 and race part # L44610. From my research it looks like your hub is an idler hub, you can use CE Smith Trailer Hub Assembly part # CE13311 to replace your hub. This hub comes with the bearings, seal and race to fit your spindle and it is pre-greased. It is rated for 2,700-lb Axles so you do want to make sure your...
    view full answer...

  • Wheel Bearings, Grease Seals and Electric Drum Brakes for 2002 Fleetwood Pride 5th Wheel Trailer
  • We can help you with replacement bearings, grease seals and electric drum brakes for the 6K axles on your 2002 Fleetwood Pride fifth wheel camping trailer. The best value in a pair of self-adjusting 12 x 2-inch electric drum brakes that will work great on your axles comes from Axle Teknology kit # AKEBRK-7-SA. You will need two kits to have four new brakes, two left-hand and two right-hand. These have the common 5-bolt mounting pattern. When you wire them you can use either wire for...
    view full answer...

  • Bearing Buddy Recommendation to Fit Trailer Hub Bore 2.04 inch on Harbor Freight Trailer
  • If your hub has a grease cap opening that measures 2.04 inch the correct Bearing Buddy is the part # BB2047 that you referenced. Or for a stainless steel version you'd want the part # BB2047SS.
    view full answer...

  • Replacement for National 473317 Grease Seal
  • According to my research the correct replacement for your National 473317 grease seal is Grease Seal # 168233 which has a 1.688" inner diameter and 2.332" outer diameter. The # 58846 grease seal that comes with Bearing Kit # BK2-100 has a 1.719" inner diameter and 2.565" outer diameter.
    view full answer...

  • How to Pick Out Replacement EZ Lube Grease Cap for Trailer Hub
  • You will want to use a dial caliper or micrometer to measure the inner diameter of the hub you have on your trailer to determine what size cap would be needed. Check out the picture I attached that shows this measurement being taken on a hub. I attached a link to all the grease caps we offer, once you know what size you need check out the link I attached to see all the sizes we offer. If the dimension you find is 1.986 you'd want # 21-41-1, if you have a dimension of 2.441 you'd want...
    view full answer...

  • How to Measure to Determine Correct Trailer Hub Grease Cap
  • You will want to use a dial caliper or micrometer like part # PTW80157 to measure the inner diameter of the hub you have on your trailer to determine what size cap would be needed. Check out the picture I attached that shows this measurement being taken on a hub. I attached a link to all the grease caps we offer, once you know what size you need check out the link I attached to see all the sizes we offer. The closest cap we have to what you listed is the part # F001503 which has an outer...
    view full answer...

  • Trailer Hub With Inner Bearing LM67048 and Outer Bearing L44649 and 5 on 4-1/2 Bolt Pattern
  • I can help, because we do have one hub that uses a # LM67048 inner bearing, # L44649 outer bearing and has a 5 on 4-1/2" bolt pattern, the Dexter Trailer Hub and Drum for 3,000-lb Axles # 008-418-02, which will fit your spindle. I have added a link to a video review of this hub and drum for you to check out as well.
    view full answer...

  • Weight Capacity of Dexter P-12 Model SLR Axle
  • I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing # L68149, outer bearing # L44649, and the grease seal # 58846. All of these can be found in the kit # BK2-100 if you are needing to replace your bearings and seals.
    view full answer...

  • Replacement Trailer Seal for 171255TC
  • We have a TruRyde brand that will fit as a replacement for what you have. For a pair, you would need # RG06-050. Or for one double lip seal, # 58846. To be sure, you can check the measurements of your seal. The measurements will have to be as accurate as possible so I recommend using a set of calipers like the # PTW80157. The inner diameter of the TruRyde seal is 1.719 inches. The outer diameter is 2.565 inches.
    view full answer...

  • How to Find Replacement Drum Brake Assembly for Boat Trailer
  • I can tell you exactly how to find compatible drum brake assemblies, though I took a look and could not find any type of reference to Dico 40511. To determine the brake assemblies that will fit your 2002 Escort boat trailer, you need to know your axle's weight capacity, your mounting flange bolt pattern and the inside diameter and depth of your drum. For example, Hydraulic Brake Kit # AKFBBRK-35-D are rated for 3,500 lb axles, have a 4-bolt mounting flange pattern and measure 10"...
    view full answer...

  • Picking Out Bearing Buddy for Harbor Freight Trailer
  • In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place. Use a screwdriver to pry off the cap. Clean the grease off and measure the opening. I have included a video demonstrating the Bearing Buddy. The Bearing Buddies # BB1980A-SS for example are for hubs with a 1.98 inch hub bore.
    view full answer...

  • Replacement Bearings for Dexter 5,100 Pound Axle on Grand Design Trailer
  • I reached out to my contact at Dexter and with the serial number you provided they were able to track down the correct replacement bearings for the spindles on your axles. For the inner bearing you will use part # 25580 for the bearing itself and # 25520 for the race. For the outer bearing you will use part # LM67048 for the bearing and # LM67010 for the race. The correct grease seal is part # RG06-070. For a complete kit that includes these bearings, races, and seal, you can use...
    view full answer...

  • Bearing Buddy Bearing Protectors for 1.975 Hub Bore Diameter
  • The closest Bearing Buddy Bearing Protectors we have to matching the 1.975" inner hub bore diameter you measured are part # BB1968 for Chrome or # BB1968SS for Stainless Steel (rust resistance). As you mentioned in your question these are designed to fit a 1.968" hub bore, so it doesn't match your dimension exactly but it's close enough to fit and work great (this is a difference of just 0.007"). The hub bore is going to be tapered as well which will further seal this cap in place. I...
    view full answer...

  • Trailer Hub Recommendation for Spindle that Measures 1 inch and 1.25 inch
  • Your spindle dimensions match the BT8 spindle so for a replacement hub the # AKIHUB-440-2-1K will fit if you have a 4 on 4 inch bolt pattern or the part # AKIHUB-545-2-1K for a hub with a 5 on 4-1/2 inch bolt pattern.
    view full answer...

  • Replacement Bearing Kit for 1988 EZ Loader Trailer with BT 150/151 Straight Spindle
  • The correct replacement bearing kit for your 1988 EZ Loader trailer with the BT straight spindle is our part # BK1-150. This kit includes the inner/outer bearings to fit your 1-1/16" spindle shaft size, races, cotter pin and spindle washer. For the correct grease seal, you'll need to use # 13194, since the one included with the # BK1-150 kit is not the correct size.
    view full answer...

  • How to Determine Correct Nev-R-Lube Bearing/Hub Assembly
  • From the pictures you sent in it looks like the inner diameter of your Nev-R-Lube bearing is about 2" which means you'd need the 50MM Nev-R-Lube Bearing for 8,000-lb Dexter Axles # 31-71-3. Aside from that you're basically just going to need to pull that bearing and measure the inside diameter to determine if the 50MM # 31-71-3, 42MM # 31-73-3, or 35MM # 31-72-3 bearing will best fit. The part 008-402-81 that you referenced finding somewhere else looks to be a hub assembly for a disc...
    view full answer...

  • Maintenance of Dexter Nev-R-Lube Bearings on Airstream Trailer
  • The Dexter Nev-R-Lube Bearings like the 50MM Nev-R-Lube Bearing for 8,000-lb Dexter Axles - Qty 1 # 31-71-3 are not to be lubed or greased. They are pre-lubricated at the factory and have a 5 year or 100,000 mile warranty as long as serviced by a Dexter tech (2-year warranty if serviced by independent tech). They are designed to be maintenance free so if they go bad, you will need to replace the bearing. It sounds like you will have a lot of life left with only 30,000 miles on your trailer. When...
    view full answer...

  • Replacement Hub Needed for Dexter Axle 8-256
  • Your Dexter Axle hub 8-256 should use an # L68149 inner bearing and an # L44649 outer bearing which means you have a #84 spindle and you'll use one of the following hubs: 5 on 4-1/2" - part # 84545BX 5 on 4-3/4" - part # 845475UC1 5 on 5" - part # 84550BX 5 on 5-1/2" - part # 84555UC1 Just match up the bolt pattern and you'll be good to go! I've attached some helpful articles on bolt patterns that you can check out if you aren't sure what you have.
    view full answer...

  • Recommended Bearing Buddy and Bearing Kit for Malone MicroSport Trailer
  • The Malone MicroSport Trailer # MPG460G does have the 1.98 inch inner diameter hub. I confirmed this with the manufacturer. To add bearing buddies, you simply need the # BB1980A for chrome or # BB1980A-SS for stainless steel. You will not need to replace the bearings to install these caps. You can simply use the LubriMatic Economy Size Mini Grease Gun # L30100 and add the marine trailer wheel bearing grease # L11399 that matches what the axle comes with. When installing these, you...
    view full answer...

  • Replacement Trailer Brake Magnet and Assemblies for Dexter 12,000 lb Trailer Axle
  • For a 12,000 lb Dexter axle the correct replacement brake magnets would be the part # BP01-306 which can work on either side of the trailer. Or for all new assemblies you'd want the part # 23-442-443 which is one for each side. These come with magnets so you wouldn't need those as well.
    view full answer...

  • Replacement Bearing and Seal Kit for 2004 Kendon Motorcycle Trailer
  • My research indicates that grease seal part 125255UC has an outer diameter of 1.980-inches and this correlates with the hubs that use bearing # L44649. The seal part most often used with inner/outer bearing L44649 is seal part # 10-9 which has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches so bearing kit # BK1-150 that you referenced should do it. You can confirm the seal size by measuring a spindle at the point where the seal rides (point B in the linked image)...
    view full answer...

  • Bearing Kit for Lippert 5200-lb Axle 121066
  • Your 5200-lb Lippert axle 121066 uses inner bearing # 25580, outer bearing # LM67048 and grease seal # GS-2250DL. For all of these you can use kit # BK3-300. I also recommend bearing packer tool # ALL647646 for a cleaner method of packing the new bearings with high-temperature bearing grease such as # L11380. Often a block of wood along with a rubber mallet are handy when installing a new seal into the rear bore of your hub. These items allow you to install the seal with less risk...
    view full answer...

  • Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
  • The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are # 28580 which would be the inner bearing and # 25580 which would be the outer bearing. For the seal use # 91030.
    view full answer...

  • Electric Brakes for 10 x 2-1/4 Drums on 3,500 lb Axle & How to Determine Correct Bearings
  • Let's start with the brake assemblies, which you were kind enough to give the dimensions on for the drum, as well as the axle capacity, which are the most important things. For self-adjusting electric brakes I recommend the Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-35-SA. These brakes will fit your brake mounting flange and fit your 10" x 2-1/4" drum; you will simply need the Mounting Hardware for 10" Brake Assemblies # BRKH10B. As for the bearings, the most likely kit...
    view full answer...

  • Replacement Dust Cap or Grease Cap for Trailer
  • We do have replacement dust caps. You will simply need to use a digital caliper like # PTW80157 to determine the size needed. I've linked the page to all your options to assist. I've also linked the page to the bearing protectors that have the integrated grease zerk to maintain them.
    view full answer...

  • Which Bearing Buddy Do I Need
  • The Bearing Buddy Bearing Protector # BB1938 is designed to fit on a 1.938" hub bore and with outer bearing model 09067. In order to choose the correct grease cap or bearing protector, I strongly recommend using a precise measuring tool such as a dial caliper. Hubs can have bores that differ by only a few thousandths of an inch, so getting an exact measurement will help us choose the correct cap for you. There isn't really a "typical" setup for a trailer since the components vary depending...
    view full answer...

  • Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
  • There really should be a flat washer between the outer bearing of your hub and the nut that holds it on. The washer protects the back side of the bearing from the edges and points on the back side of the spindle nut. The Washer For 1 inch Spindle, # SW1000, is typically used on spindles that have a castle nut, like # 165686, and a cotter pin, # 165649. A D washer, # 5-23, would be used on a spindle that has a flat side and uses the same castle nut and cotter pin setup. A Tongue...
    view full answer...

  • Replacement Bearing Kit for 7,000 lb Dexter Axles
  • For your Dexter 7K axles, you will want the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # BK3-200 for each hub if you have the standard spindle. If you have the EZ Lube spindle with the grease zerk then you will want # BK3-210 to include the EZ Lube washer. For the grease, I recommend the LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge # L11390. If you want to pack them easily, I recommend using the Bearing Packer - Plastic # PTW1218. I've also attached an article...
    view full answer...

  • Availability of Replacement 1.82 Inch Dust Cap for Older Trailer Hubs
  • We do have a set of Bearing Buddy Bearing Protectors that may work for the older hubs on your somewhat fantastic boat trailer. The Bearing Buddy Bearing Protectors part # BB1810 are designed to fit a hub bore diameter of 1.810 inches, which is awfully close to the 1.82 inch measurement you took. We do not have a standard dust cap available with this same diameter. I do also recommend measuring the actual bore diameter on the hubs too to see what measurement you get with a digital...
    view full answer...

  • What is the Difference Between 1.25 Inch Trailer Bearings
  • The short answer is Yes, bearing # 15123 is slightly larger and stronger than # LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race # 15245 which has an outer diameter of 2.441 inches and bearing LM67048 uses race # LM67010 which has an outer diameter of 2.328 inches. The size and strength differences are due to the fact that bearing # 15123 is used in a higher weight capacity hub. Bearing # 15123 is the outer bearing for a hub for...
    view full answer...

  • Correct Oil Seal for Dexter 10K 8-214-5UC1 Hub/9-27 Brake Drum
  • The 9-27 (it's 9-27-1, actually) brake drum is part of a 2 piece hub/drum that uses # 8-214-5UC1 for the oil bath hub assembly. The correct oil seal is part # 10-56. The seal has an OD of 4.5 inches, and an ID of 3.125 inches. The # 10-63 you'd mentioned is too small, as its typically used with 8K capacity axles, so it wouldn't be compatible.
    view full answer...

  • Wheel Bearings for 6,000 lb Trailer Axle
  • The bearings we offer are from TruRyde, and the most typical bearings for a 6,000 lb axle are # 25580 for the inner bearing and # 15123 for the outer bearing. These also come in a kit depending on the inner diameter of your grease seal; the Bearing Kit # BK3-100 comes with these bearings, their races and a grease seal with a 2.250" inner diameter. Bearing Kit # BK3-110 has the bearings and races with a grease seal that has a 2.125" inner diameter. I have added a link to a help article...
    view full answer...

  • Replacement Bearings, Seals, and Races for Unique #84 Spindle/Hub
  • According to the part numbers you gave it looks like you need outer bearing # L44649 with the matching race # L44610, inner bearing # L68149 with the matching race # L68111, and then the grease seal # 168233 which has an inner diameter of 1.688" and outer diameter of 2.332" which fits unique #84 spindle/hub combinations. This seal has the same dimensions of a 16667 seal that is commonly used on a vehicle. The bearing kit # BK2-100 that you referenced has all of the bearings and races...
    view full answer...

  • Bearing Kit with Caps, Castle Nuts, and Lug Nuts for Hub with L68149 and L44649 Bearings
  • For a kit that includes the bearings, races, and seal you'd want the part # BK2-100 for each hub. Then for caps you'd want the part # DC200L-DCRP. For a castle nut # 165686 and for lug nuts # AM90070.
    view full answer...

  • Wheel Seal With 1.63 ID and 2.375 OD
  • Based on the measurements you gave me it sounds like Grease Seal # 168233 that you referenced is the one you need. It's a double lip grease seal that has an Inner diameter of 1.688" and an Outer diameter of 2.332". The # 010-180-00 seal is another seal with an inner diameter of 1.68" and an outer diameter of 2.33" and also is a double lip seal. I know they are not the exact measurements you gave, but that is the closest size seal that we carry. That's also why it's important to measure...
    view full answer...

  • How to Determine Correct E-Z Lube Grease Cap
  • To determine the correct E-Z Lube grease cap you are going to need to measure the center of the hub where the grease cap is going to fit (please see accompanying photo). The measurement will need to be very precise so you are going to want to use digital calipers such as # 301-17068. You will then just compare that to the available caps. Grease Cap # RG04-040 will fit a hub bore of 1.99 inches. Grease Cap # RG04-080 will fit a hub bore of 2.44 inches. Grease Cap # RG04-120...
    view full answer...

  • How to Pick Out Bearing for 10,000 lb Dexter Axle
  • We have the bearing part # 387A which is over 2 inches in inner diameter and is seen on 10,000 lb axles but I'd have to know exactly what your spindle dimensions are to know for sure what you'd need. If you can use a digital caliper like the # PTW80157 to get me the exact dimension of the spindle where the bearings and seal ride I'll be able to let you know which parts you need. A very common bearing combo for Dexter 10k axles is # 387A and # 25580. Races needed are # 382A and # 25520....
    view full answer...

  • Dexter 8-247-Hub Bearing Buddy and Bearing Kit Fit
  • Yes the Bearing Buddy part # BB1980A-SS is correct for the Dexter hub you have # 8-247-50UC3 and then for the bearing kit part # BK2-100 is also correct! You made my job easy.
    view full answer...

  • Replacement Center Plug For Kodiak Oil Bath Caps
  • Mark, it sounds like you misplaced the rubber center plug for the oil cap part # K1014PCAP from your Kodiak 10,000-lb Disc Brake Kit part # K2HR958QD11. I recommend Replacement Center Plug for Kodiak Oil Cap part # KO54FR to replace it.
    view full answer...

  • Replacement Double-Lip Seal for Lippert Part 122088 with 2.250" ID and 3.376" OD
  • We do offer double-lip grease seals from TruRyde that have a 2.250" ID and a 3.376" OD. We have part # GS-2250DL for just one seals or part # RG06-070 for two seals.
    view full answer...

  • Converting Standard 7K Grease Hubs to Oil Bath Hubs
  • Initially what you need to do is clean out all of the grease in your hub, on/in the bearings, and on the spindle. Once that is done you simply swap out the grease seal for the oil seal included in the Kodiak XL ProLube Kit # XLPROLUBE2440KIT (which has a 2.25" ID and 3.376" OD) and reinstall everything. You do need to make sure that the ID of the oil seal matches up with your current system so that it keeps your oil from leaking. If you are needing to replace the bearings and seals as...
    view full answer...

  • What Size Bearing Buddy Fits My 7000 lb Axles
  • Based on your 7000lb axles, it has a grease cap flange diameter of 2.722". As a result Bearing Buddy Bearing Protectors # BB2717SS will work for your axles.
    view full answer...

  • Replacement Grease Seal for 4400-lb Lippert Trailer Axle
  • For a 4400-lb Lippert axle the most popular grease seal is part # 58846. This is a double-lip grease seal with an inside diameter of 1.719-inches and an outside diameter of 2.565-inches. This seal is often used along with inner wheel bearing # L68149 and outer bearing # LM67048.
    view full answer...

  • Replacement Hubs and Brake Assemblies for Dexter Mobile Home Axle and 8-147 Hubs
  • Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you have the hub number I can still give you the info you need for new drums and brakes. Your current Dexter hub 8-147 I was able to look up and it has an inner bearing # LM48548, an outer bearing # L44649, and a grease seal # 58846. Based on this information...
    view full answer...

  • Can 6 Lug Hubs be Replaced With 8 Lug Hubs on Toy Hauler
  • It is likely you can replace the 6 lug hubs with 8 lug hubs on your 2018 Livin' Lite Quicksilver 8.5x26FBR with 4,400 lb axles so long as you can ensure compatibility with your spindle. To do this you will need to know your bearing numbers and grease seal inner diameter. The easiest way to do this is call the manufacturer with your VIN, as they should have this information due to how new your toy hauler is. From the information you gave there is a pretty good chance you will have inner...
    view full answer...

  • How Much Oil Should be Added to an Oil Lubrication System on Hubs
  • Basically you just want to fill the oil, like part # XLPROLUBE, up to where that center plug will fit on the Oil Cap Kit # RG04-300. When using grease to lubricate a hub you want to fill it up completely but with an oil lubrication kit the oil is still a liquid so it will be moving in and out of the bearings while you are driving down the road. Please note that if you are switching from a grease setup to an oil setup that you need to ensure that you clean all of the grease out of your...
    view full answer...

  • Bearing Kit for 3500 Pound Dexter Axles
  • With a 3,500 pound Dexter axle your bearings are # L44649 for the outer and # L68149 for the inner. So you were looking at the correct bearing kit with part # BK2-100.
    view full answer...

  • Replacement Bearings for Dexter 8-222 Hub
  • I looked up your Dexter 8-222 Hub and was able to find the inner and outer bearing numbers as well as the grease seal used. It looks like this particular hub was designed for mobile homes and these, for the most part, have more unique bearings and bolt patterns because they are technically manufactured for one time use only and not meant to be altered or replaced. Because of this, there is unfortunately not a 6 on 5-1/2 inch hub available that will be compatible with your trailer's...
    view full answer...

  • Replacement Hub, Bearing, and Grease Seal Kit for a UFP H-1062-3 Axle
  • To find the correct hub for your axle you typically need to find the part numbers for your bearings and grease seal, or the diameter of the different spots that they sit on your spindle. We actually have had a customer who sent this information in to us so I am able to help you find exactly what you are needing. According to the customer, your UFP H-1062-3 axle has a spindle that has # L44649 inner and outer bearings, and a grease seal that has a 1.979" OD and a 1.372" ID, like part...
    view full answer...

  • Replacement Bearings and Seals for Lippert 4,400 Lb Axle
  • The Lippert 4,400 lb axles use the same bearings and seals as a Lippert 3,500 lb axle so you can use the Bearing Kit for #84 Spindle part # BK2-100 or just the Grease Seal part # RG06-050.
    view full answer...

  • Difference Between Grease Seal GS-2125DL and Seal 22558
  • The two seals you mentioned have different inner diameters. The part # GS-2125DL has an inner diameter of 2.125 inches and the part number 22558 has same dimensions as # RG06-070 which has inner diameter of 2.25inch. Both have same outer diameter of 3.371 inch.
    view full answer...

  • Replacement Bearing Kit for a 2018 Grand Design Imagine 2800BH
  • The correct replacement wheel bearing kit or your 2018 Grand Design Imagine 2800BH should be the Bearing Kit for #84 Spindles part # BK2-100. This bearing kit comes with one L68149 inner bearing, one L44649 outer bearing, the corresponding races, a 10-19 grease seal, a tang washer, and a cotter pin. This will be everything that you need to rebuild the hubs on your Dexter 3,500 lb axle. You will need one kit per hub. Please note that in order to ensure you have the bearings properly...
    view full answer...

  • Grease Cap with Diameter Close to 3-3/8-Inches
  • We have grease caps in many sizes that appear on the linked page and the nearest size to your specified 3-3/8-inches is Fulton part # F106122 which has an outer diameter of 3.358-inches.
    view full answer...

  • Can Bearing Kit BK2-100 be Used on Trailer that Had D-Washer on Spindle Nut
  • If everything but the tang washer of the bearing kit # BK2-100 matches what you have you could go with it and then just reuse the washer you have now and you'd be fine. As long as you didn't lose yours it would work great. We do have just a D-washer by itself with part # 5-23. Or you could piece together your own kit too with just parts you need. The bearings would be # L44649 and # L68149, and the races would be # L44610 and # L68111. The seal would then be the # RG06-050.
    view full answer...

  • Replacement CR 12124 Grease Seal for Trailer Hub
  • While I wasn't able to officially cross-reference the CR 12124 seal that you mentioned, based on a few different customers we have had in the past looking to replace this particular number seal, the TruRyde Double Lip Grease Seal # 34823 does appear to be the correct replacement. This double lip seal (which will indeed be an upgrade over your existing single lip) features an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. It is typically used on the BT8 spindle...
    view full answer...

  • Bearings For 10,000 Lb Dexter Axle
  • My contact at Dexter was able to use your Dexter Axle number 4389878 and Serial number 125263858 to find the bearings. She said your hub uses outer bearing 031-030-02, outer race 031-030-01, Inner bearing 031-019-02 and Inner race 031-019-01. These parts are equivalent to the inner bearing # 387A outer bearing # 25580 and race # 382A and race # 25520.
    view full answer...

  • How to Determine What Bearing Buddies Fit on Trailer
  • It is really easy to determine which Bearing Buddies are the correct fit for your trailer, though we have no way to confirm a fit on any specific make or model. For you to confirm the right Bearing Buddies all you need to do is measure the hub bores on your trailer's hubs using Digital Caliper # PTW80157 and match the hub bore diameter to the correct Bearing Buddies. For example, the Bearing Buddy Bearing Protectors - Model 2047 # BB2047 you referenced will fit a hub bore diameter of...
    view full answer...

  • Grease Seal for Spindle that is 1.68 Inches in Diameter
  • There are grease seals with inner diameters of 1.687 inches, # 168255TB, or 1.688 inches, # 168233, that would be a better fit. If the outer diameters match the inner hub bore diameter then you can use one of them instead. Seal # 168255TB has an inner diameter of 1.687 inches and outer diameter of 2.561 inches. Seal # 168233 has an inner diameter of 1.688 inches and outer diameter of 2.332 inches. The seals in set # RG06-050 have an outer diameter of 2.565 inches so that would...
    view full answer...

  • Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
  • The LM67000LA is a Timken part number for a bearing cone with a 1.250" I.D. and a 2.328" O.D. This is the same as our bearing part # LM67048. The LM67010 is a Timken part number for a race with a 2.328" O.D. that matches our part # LM67010. The only trailer hub we have that uses this bearing/race and has a 5 on 4-1/2" bolt pattern is the Trailer Hub Assembly part # T1721400042. This hub uses a LM67048 inner bearing (1.250") and a LM11949 outer bearing (.750"). Unfortunately, we do not...
    view full answer...

  • Replacement Plastic Cap and Seal for 8K EZ Lube Axle
  • The Replacement Grease Cap for Kodiak 8,000-lb Disc Brake Kits # KPCAP is designed to fit a 2.25 inch spindle and has a thread outer diameter of 2-7/8 inch by 12 thread. We also have the Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles # RG04-230 with the same dimensions. We don't have the Viton O-ring outside of the cap replacement kit. Either of these will work on the EZ Lube axles.
    view full answer...

  • Double-Lip Grease Seals to Replace AL-KO Part 363497
  • To replace your AL-KO seal part 363497 you can use the double-lip seal set # RG06-070. These have an inner diameter of 2.250-inches (to match your spindle diameter) and an outer diameter of 3.376-inches (to match the bore on your 12 x 2-inch hub/drum assembly). I cross-referenced your part 363497 to confirm compatibility.
    view full answer...

  • Replacement Seal for National Seal or Timken Seal 472920
  • National seal 472920 has an inner diameter of 2.25 inches and outer diameter of 3.375. For a replacement, you will want Grease Seal - Double Lip # GS-2250DL or oil seal # 10-63.
    view full answer...

  • Bearing Replacements for AL-KO T44 Trailer Axles
  • The Al-KO T44 axle uses the bearings # L68149 inner bearing and # LM67048 outer bearing. For the seal you'd need the part # RG06-050 and you'd be set.
    view full answer...

  • 2.24" Grease Cap Replacement
  • I have a solution for you but we do not have any standard grease caps with a 2.24" diameter like the # RG04-020 . I recommend going with the Bearing Buddy Bearing Protectors # BB2240 which will not only protect your bearings but provide an easy, safe way to monitor and control the level of grease in your axle hub. These are especially helpful on boat trailers, since they seal out all water, dirt and debris and allow for complete submersion. I've attached a brief video review of the...
    view full answer...

  • New Hydraulic Brakes, Actuator & Measuring for Replacement 10 Inch Hub and Drum on Boat Trailer
  • While we can get you the correct hydraulic brakes as well as an actuator, the measurements you gave for your bearings only coincide with one idler hub. The issue with bearings is that the measurements do need to be very exact, so I strongly recommend using a digital caliper like # PTW80157 and measuring your spindle where the bearings ride to get the exact measurement. Since you mentioned a 10 inch brake drum, and you got the (fantastic looking) Aluminum Viking Series Valhalla Trailer...
    view full answer...

  • Replacement Trailer Hub Grease Seal for AD2528EO
  • We have just what you need based on the dimensions you listed. The correct grease seal you need is the part # 168255TB which has outer diameter of 2.561 and an inner diameter of 1.687 inch.
    view full answer...

  • Converting Brakes of 1994 Jayco Eagle to Electric Drum
  • Replacing the hub/drums on your trailer will not change the length of the axle at all. Thankfully the hub manufacturers we carry all have the same overall length for the hubs so there's no need to worry about that. The hub/drum part # 8-173-16UC3-EZ would work great on your spindle as long as it has a diameter of 1.063 inch where the bearings ride. The brake assemblies part # 23-47-48 would fit this as well. A great way to upgrade your trailer to a 7-way would be with the 7-way upgrade...
    view full answer...

  • Seal Recommendation for Boat Trailer 47319
  • That seal number is not super common but it's typically Inside Diameter (In): 1.687 Inch Outside Diameter (In): 2.332 Inch Which matches # 010-180-00.
    view full answer...

  • Recommended Grease Cap for 7,000 Lb Trailer Axle
  • The majority of 5,200 lb to 7,000 lb trailer axles use a grease/dust cap with a 2.72" inner diameter in which case you could use part # TRDC-275 or part # K7CAP if you have zerk fittings on the spindle. That said, it is always best to measure the inside diameter of the hub in order to ensure you have the correct grease cap.
    view full answer...

  • Is the Sleeve Included With the Oil Seal Part 382-8005 Offered Separately
  • The wear sleeve included with the Oil Seal part # 382-8005 is not offered separately so if this is what you need then you would have to purchase the kit which comes with both the seal and sleeve unfortunately.
    view full answer...

  • Bearing Kit with LM67048 and L44649 Bearings
  • I do have all of the parts you need but we do not offer an all inclusive bearing kit with them. Instead, you will need to purchase each separately using the list I have attached for you below. Inner Bearing - part # LM67048 Inner Race - part # LM67010 Outer Bearing - part # L44649 Outer Race - part # L44610 Grease Seal - part # 10-42 Tang Washer - part # 5-101
    view full answer...

  • Dust Caps with Rubber Plugs for 1.99" Hub and 2.72" Hub
  • For the 10" use the Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2 part # RG04-040 for the 12" use the Dust Cap for Kodiak Disc Brake Kit 2.72 O.D. part # K7CAP. Both of these will included the black rubber plugs as well.
    view full answer...

  • Bearings and Seal Needed for Lippert 8K Axle
  • From what I could find online it looks like the Lippert 8K axles use inner bearing # 25580, outer bearing # 02475, and a grease seal that has an inner diameter of 2.250". If you are using a Kodiak disc brake kit like part # K2HR712D for 7K axles then it would make sense that this wouldn't fit correctly as this kit comes with an outer bearing # 14125A which is about 0.040" larger as you have found. If you have bearings for the 8K axle but you are using 7K rotors then all you need to do...
    view full answer...

  • Replacement Hub For 2007 Marine Master Trailer With UFP 2,000 Lb Axle
  • Your axle is a UFP axle which is made by Dexter Axle. I contacted them with your serial number and they were able to tell me your axle is a 2,000 lb axle with a 76" hub face to hub face and 62" spring center to spring center. The bearings are inner and outer part # L44649. Dexter said your original hub is a 2,500 lb idler hub. You can replace your idler hub assembly with Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 part # TA88545-2 that uses the inner/outer bearings part...
    view full answer...

  • Correct Buddy Bearing Protectors for 1-15/16 Inch Hub Bore
  • The correct set of Bearing Buddy Bearing Protectors for a 1-15/16" hub bore is part # BB1938 for chrome or part # BB1938SS for stainless steel.
    view full answer...

  • Bearing Buddy Sizes Compatible for Hub 2 Inch Inner Diameter
  • There are a couple of sizes close to your 2 inch diameter. If you measured with a digital caliper that goes to the thousandths like # 301-17068 then that will be much easier to determine the fit. We have the 2.047 inch # BB2047 in chrome plated or # BB2047SS in stainless steel. We also have the 2.080 inch # BB2080 in chrome of # BB2080SS in stainless steel. If it is smaller we have the 1.80 inch # BB1980A-SS in stainless steel. The fit should be snug to prevent leaks...
    view full answer...

  • Bearings for a Dexter Trailer Hub 8-222
  • I called Dexter Axle and they were able to inform me that your Dexter Trailer Hub 8-222 uses a part # L68149 inner bearing, part # L68111 inner race, part # LM67048 outer bearing, part # LM67010 outer race, and a part # 10-40 grease seal. Unfortunately, we don't have a bearing kit with all of these parts for you so they will need to be purchased separately.
    view full answer...

  • Grease Seal Replacement for Seal with 1.75 Inch Inner Diameter
  • Based on my research, grease seal 225337375TB has a 1.75 inch inner diameter. There are three grease seals that have that same inner diameter but each are a single lip. You do need to measure the outer diameter of your seal to ensure you get the correct replacement; I will list each of the grease seals that have a 1.75 inch inner diameter, as well as what their outer diameter is. - Grease Seal # 10-42 has a 2.33 inch outer diameter - Grease Seal # 1105-100-031 has a 2.356 inch outer...
    view full answer...

  • Bearing Kit to Replace Timken 07100 Bearings on a Boat Trailer
  • Your Timken 07100 bearings have the same dimensions as bearing # L44643. They both have a 1 inch inner diameter and fit a BT8 spindle. The correct bearing kit is part # BK1-100. The Bearing Buddy protector to fit is part # BB1980A-SS in stainless steel or # BB1980A in chrome.
    view full answer...

  • Locating Replacement Grease Seal for Harbor Freight Trailer with 1.21 Inch Inner Diameter
  • The closest grease seal we have available to the dimensions you provided is the TruRyde # 34823. This particular seal has an inner diameter of 1.249 inches and an outer diameter of 1.983 inches. I was not able to cross-reference the number you found on the seal to an available part. I simply recommend verifying the measurements you took on your seal with a digital caliper. You can also take a quick measurement on the spindle where the seal rides to get the inner diameter you need.
    view full answer...

  • Bearing Kit for 2010 Aliner Sport Trailer with 2000 Pound AL-KO Axle
  • The bearing kit you will want for your 2010 Aliner Sport with 2000 lb axle is the Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal # BK1-100. This includes the bearings, races, seal and pin.
    view full answer...

  • How Often Should I Inspect Sealed Bearings On A Boat Trailer
  • You may have sealed bearings on the boat trailer like Dexter 35MM Nev-R-Lube part # 31-72-3, Dexter 42MM Nev-R-Lube part # 31-73-3 or Dexter 50MM Nev-R-Lube Bearing part # 31-71-3. The sealed bearings are typically considered maintenance free because they are pre-greased at the factory and they are sealed which makes them resistant to contamination. Even though the bearings are already greased, it is a good idea to pull the hub off once a year to check for damage especially since the...
    view full answer...

  • What is Next Size Smaller Bearing Buddy than One with 1.98 inch Outer Diameter
  • Bearing Buddy does have a size that is slightly smaller than the 1.98 inch one you already tried with the # BB1968 or stainless steel # BB1968SS. It's .012 of an inch smaller in diameter which sounds like exactly what you are looking for.
    view full answer...

  • Grease Seal in Bearing Kit BK2-100 Compatibility with Bearing Buddy Grease Caps
  • The Bearing Kit for #84 Spindle, L44649/L68149 Bearings, 10-19 Double Lip Seal # BK2-100 comes with the seals compatible with your spindles. The double lip seals are a better seal and there are different part numbers simply because there are different manufacturer part numbers that are cross-referenced with different manufacturer part numbers for fit. The # RG06-050 seals are the same as 158800, GS-1719DL, # 58846, and 171255. The bearing kit # BK2-100 will work well for you and...
    view full answer...

  • D Washer Replacement Needed for a Spindle
  • It sounds like the washer you are looking for is like part # 5-23 which I have added a photo with specs for you to reference. This type of washer is held in place with a spindle washer like part # 5-101. Are you looking for a replacement bearing as well? If you could let me know what the bearing number is, like the the popular # L44649, then I can help you out with getting a replacement.
    view full answer...

  • How to Find the Correct Grease Seal for Trailer Hub Assembly
  • Unless you can get the bearing numbers and seal information from the manufacturer, there isn't a way to really find that information without removing the hubs. You don't have to dismantle them if you want to measure the spindle in a couple locations with a digital caliper like # PTW80157. I've attached a video of how to do this. Sometimes there isn't too much wear on the seal and you may be able to read the number on the metal rim. If not, then measuring the spindle and getting...
    view full answer...

  • Bearings For Older Trailer Hub 22834
  • It sounds like you have the older hub 22834 that is no longer in production that takes the outer bearing of part # 1779 and inner bearing of part # 2788. I was not able to find any other bearings that measure .093" inner diameter besides 1779 or any other bearings that measure 1.50" inner diameter besides 2788. Any other size bearings will not fit the spindle. Your best option is to get a new axle if you would like to find a new more modern hub that fits the spindle. Measure from the...
    view full answer...

  • Bearing Buddy That Fits 2.7 Inch Hub Bore
  • We do have a Bearing Buddy which fits a similar dimension as the 2-3/4" you referenced but I do recommend using a digital caliper and measuring your hub bore size to the thousandths of an inch to ensure you get the correct fit. For a 2-3/4" hub bore the closest fit we have are Bearing Buddies that fit a 2.717" hub bore, the Bearing Buddy Bearing Protectors - Model 2717SS - Stainless Steel # BB2717SS and the Bearing Buddy Bearing Protectors - Model 2717 - Chrome Plated # BB2717. I...
    view full answer...

  • Bearing Buddy Recommendation for Trailer Hub Marked 8-247
  • For a Dexter Hub that is stamped 8-247 the correct Bearing Buddy would be the part # BB1980A.
    view full answer...

  • Determining Bearing Buddy Grease Seal Set
  • Based on your spindle measurement where the bearings ride it sounds like you have # L44649 for the bearings which means the correct Bearing Buddy seal set is part # BB60005. Although, with those bearings you should have a BTR spindle and the location where the seal rides should be 1.50 inches not 1.25 inches. If the seal location is 1.25 inches then it sounds like you have a BT8 spindle in which case you have # L44643 for the bearings which measure 0.99 inches and you need part # BB60001...
    view full answer...