Filter Questions and Answers:

reset filter

Expert Answers about RV Camera


  • Recommended Furrion RV Camera System Compatible with Pre-Wired Camping Trailer
  • There are 3 camera options compatible with your pre-wired 2019 Grand Design Imagine travel trailer. They are the same camera, with different monitor options and two of the three have additional features. The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF due to the screen size does not allow you to expand your system to multiple cameras or views. The 5 inch # FOS05TASF and the 7 inch # FOS07TASF allow up to 4 cameras in quad view...
    view full answer...

  • Can An Additional Camera Be Added to The Furrion Backup Camera System?
  • The old Furrion system you have will not allow you to add an additional camera. To get that separate camera for backing up, I recommend updating your system or adding to it. The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF is not able to use multiple cameras, but the 5 inch # FOS05TASF and the 7 inch # FOS07TASF are able to use up to 4 cameras. I confirmed all this with my contact at Furrion. For the additional camera you can use...
    view full answer...

  • Furrion 5" RV Observation Camera System # FOS05TASF vs Furrion 4.3" # FOS43TASF
  • Both the Furrion 5" RV Observation Camera System # FOS05TASF and the 4.3" # FOS43TASF include the same waterproof camera with infrared LEDs to provide nighttime vision. The only differences between the 2 systems have to do with the monitor itself. In addition to the size difference, the 5" Monitor with the # FOS05TASF separates itself with its compatibility with up to 4 cameras along with a speaker that lets you hear audio sent from the camera. Other than that the two systems are nearly...
    view full answer...

  • Recommended Camera System for Truck and Trailer Viewing on Same Monitor
  • The Wireless Observation System w/ LED Monitor - 7" Screen # 324-000002 is able to utilize multiple cameras but it isn't the isn't the best wireless system. For a multiple camera system, I recommend the Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF or the 5 inch screen # FOS05TASF. Then for an additional camera with either of these systems you can use the Furrion Vision S Rear Camera w/ Sharkfin Bracket # FCN48TASF. If you are willing...
    view full answer...

  • Best Multi Camera System Recommendation for 2019 Grand Designs 328M Toy Hauler
  • Since you have a 2019 Grand Designs 328M pre-wired for a Furrion system and you are wanting a setup that will give you the ability to view multiple camera views the best and easiest solution is going with a Furrion 7 inch Monitor and Camera kit part # FOS07TASF with the clearance light camera kit part # FCE48TASL as well. What's great about this setup is that the install is super simple since your vehicle is already setup for the camera at the rear of the vehicle and then the clearance...
    view full answer...

  • Which Backup Camera Do I Need With 2020 Grand Design Solitude Fifth Wheel
  • Your 2020 Grand Design Solitude is pre-wired for the Furrion Vision S Backup Camera system with night vision # FOS43TASF that comes with a 5" display screen. You could also use Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 as well which is the same system but it comes with blind spot side marker lights with built in cameras. If you would like a larger screen I recommend # FOS07TASF or the camera with the 7" display screen. This system...
    view full answer...

  • Backup Camera Recommendation for Forest River Trailer PreWired for Camera
  • The Furrion camera system part # FOS43TASF does fit your Forest River trailer that is pre-wired for a back up camera. The circuit that is present at the rear of your trailer is the running light circuit. This tells the camera to come on when the running lights or headlights of your trailer are activated. This allows you to basically turn on the setup whenever needed. If you wanted a larger monitor we have the part # FOS05TASF which has a 5 inch screen or the part # FOS07TASF which has...
    view full answer...

  • Recommended Furrion Wireless Camera Observation System with 3 Cameras
  • The Furrion Vision S Side Camera w/ Marker Light Bracket - 2 Cameras # FCE48TASL and the Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF will work well for your 3 camera display. The monitor layout you are seeking is not how the system is designed. You can choose from the quadrant view to the H-Split view. I've attached a photo to assist.
    view full answer...

  • Voyager Backup Camera and Observation System for Winnebago Micro Minnie
  • We have the following Voyager Systems to choose from for your Micro Minnie: WiSight RV Observation Camera System w/ Monitor and Mount - Wireless - 4.3" Screen # WVHS43 WiSight RV Observation Camera System w/ Monitor and Mount - Wireless - 5.6" Screen # WVHS541 Digital Observation System - Wireless - 4.3" Screen # WVOS43 Digital Wireless Observation System - 5-5/8" LCD Monitor - Wireless Camera # WVOS541 Monitor and Camera Kit - 5.6" Screen # AOS562 If you just want the camera...
    view full answer...

  • Trailer Connector Adapter with Lamp-Out Sensor to Pair Furrion Observation Camera
  • If the solution the manufacturer provided you to pair the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF was a lamp out sensor I definitely recommend going that route. The Trailer Connector Adapter w/ Lamp-Out Sensor Bypass # 20142 is designed to allow the sensors to detect power so this is the part you would want to use on your 2019 GMC Sierra.
    view full answer...

  • Difference Between Voyager WiSight RV Observation Camera Systems WVHS541 and WVHS43
  • Yes, you are correct that the two Voyager WiSight RV Observation Camera Systems # WVHS541 and # WVHS43 differ only in the size of their included monitor screens which are either 5.6-inches with # WVHS541 or 4.3-inches with # WVHS43. Both can use up to 4 cameras, both include infrared night vision and both have a 60-foot transmission distance.
    view full answer...

  • Best Observation Camera for 2019 Grand Design Imagine Trailer
  • Your 2019 Grand Design Imagine XLS 21BHE should be pre-wired for use with a Furrion observation camera so the best option is the Furrion RV Observation Camera System w/ Monitor and Bracket # FOS07TASF which has a 7 inch screen, or # FOS05TASF for the 5 inch screen. These camera systems are the best option because they are not only highly effective but also easy to use and set up in a pre-wired trailer. The Furrion Observation camera system has a camera that has a shaded design so...
    view full answer...

  • Recommended Monitor Size for Furrion Vision S Wireless Camera System
  • I recommend going with at least the 5" # FOS05TASF or 7" # FOS07TASF monitor screen because you can only use 1 camera with the 4.3" # FOS43TASF screen. With the 5" and 7" options you can add an additional 3 cameras with parts # FCE48TASL and # FCN48TASF so that you can see behind you, on either side, and then use the 4th camera wherever you see fit. If you like the idea of the side marker lights right off the bat then these are offered packaged with both the 5" # FCE48TASL-05 and...
    view full answer...

  • Recommended Observation System for 2019 Grand Design Momentum 320G
  • Your 2019 Grand Design Momentum 320G is pre-wired for a Furrion Observation System. For this setup I highly recommend the Furrion RV Observation Camera System # FOS43TASF that comes with a 4.3" monitor or # FOS07TASF that comes with a larger 7 inch screen. Both of these systems are designed to plug right into the pre-wired bracket on your Grand Design Momentum, feature a waterproof camera with infrared LEDs for nighttime vision, and a motion sensor that will alert you of any moving...
    view full answer...

  • Replacement Camera for Furrion RV Observation Camera System FOS48TA-BL
  • I do have an option for you but replacement cameras for the Furrion RV Observation Camera System FOS48TA-BL are no longer available as they have been discontinued by Furrion. The Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF will not work. Therefore, your only option would be to upgrade to a new system, the Furrion RV Observation Camera System part # FOS43TASF. If you already have the pigtail for the mounting bracket wired on your trailer then you can reuse this...
    view full answer...

  • Can A Truck Bed Camera Be Used With the Furrion RV Observation Camera System
  • The Furrion RV Observation Camera System part # FOS43TASF which is a fit for your 2019 Keystone Montana 3121RL can be paired with side cameras like the Furrion Vision S Side Camera w/ Marker Light Bracket part # FCE48TASL for increased visibility of the trailer but they currently do not offer a camera for the vehicle. I assume your 2019 Keystone Montana 3121RL has a pre-mounted bracket specially for the Furrion RV Observation Camera System so I recommend you use this system for your trailer...
    view full answer...

  • Buyers Products Wireless RV Observation Camera 3378883200 with Large Display Screen
  • Furrion's RV Observation Cameras such as # FOS43TASF are self-contained systems that cannot interface with another device like a tablet, nor with a vehicle's OEM camera system. This would surely be handy but it would mean lot of background work between the various manufacturers and none of them would want to deal with the troubleshooting issues. The Furrion's display is about average size, about 4-1/4-inches, but we do have others with larger screens that would give you an image size...
    view full answer...

  • What Backup Camera is a 2019 Forest River Wildwood RLSS Pre-Wired For
  • The 2019 Forest River Wildwood RLSS would have came pre-wired for either a Furrion or Way Interglobal observation system. If you look at the bracket that holds the camera then there should be a name on it. If it is Furrion then you can use the Furrion RV Observation Camera System part # FOS43TASF for 4.3" screen, part # FOS05TASF for 5" screen, or part # FOS07TASF for 7" screen. If you are unsure of which brand of observation system your camper is wired for then you can always call the...
    view full answer...

  • Will the Furrion RV Observation Camera System Work with the Aluminum Body on a 2018 Ford F-250
  • I spoke to my contact at Furrion about the Furrion RV Observation Camera System w/ Monitor and Bracket part # FOS07TASF and they stated that you may have interference issues with the aluminum body on your 2018 Ford F-250. They did not report of any issues with this but it is a possibility. Unfortunately, that is just the nature of a wireless camera system. It will be the same for the Furrion RV Observation Camera System w/ Monitor and Bracket as it would with any other wireless camera system...
    view full answer...

  • Backup Camera System for 2019 Ford F-250 and a 378FL Hemisphere GLX 39 ft 5th Wheel
  • Your 378FL Hemisphere GLX likely has the pre wiring for a Furrion system. If this is the case then the Furrion RV Observation Camera System # FOS07TASF with the 7" monitor along with the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL is what you are looking for when it comes to your trailer. To add a 4th camera you would need to use the Furrion Vision S Rear Camera w/ Sharkfin Bracket # FCN48TASF I'm not sure how well this camera will fit on your 2019 Ford F-250 or...
    view full answer...

  • What Backup/Observation Camera Do I Need for a 2017 Forest River Heritage Glen
  • Yes, the Furrion RV Observation Camera System part # FOS05TASF is exactly the system that you will need to use the pre-wired backup camera mounting bracket on your 2017 Forest River Heritage Glen. The part # FOS43TASF that is listed on the bracket is the same version as the above but with a 4.3" screen instead of the larger 5" screen. There is also a 7" screen available with part # FOS07TASF. They all use the same camera so you won't have any issues. The camera will plug into the bracket...
    view full answer...

  • Furrion Camera System for Pre-Wired RV
  • The Furrion RV Observation Camera System # FOS43TASF that you referenced is indeed the correct system for the pre-wired bracket on your new RV. The camera from this system is available by itself with part # FCN48TASF, however it likely will not work with your existing Tadibrothers monitor. All of the RV cameras we have available are specifically designed to work with their own monitors. Because of this your best option will be to go with the complete Furrion System # FOS43TASF for your...
    view full answer...

  • Recommended Camera System for a Furrion Pre-Wired 2018 Keystone Sprinter 312MLS
  • From my understanding, the Furrion camera that comes with the Furrion RV Observation Camera System # FOS43TASF (which is the standard camera) has a mounting bracket and wiring connector that mates up with trailers that are pre-wired for Furrion. This should be the case with your 2018 Keystone Sprinter 312MLS and I recommend any of our 3 Furrion systems. The kit I mentioned above has a 4.3" screen and is our most popular system, but we also have kits that come with a 5" screen # FOS05TASF...
    view full answer...

  • Installation of Furrion Observation Camera System on Pre-Wired 5th Wheel Trailer
  • The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF is a very popular system for many trailers. If your trailer comes prewired for a camera, this is most likely the system that it came designed for and it will be ready to simply plug and play. The photos I can find of your trailer show this prewiring specifically for this system which is the case the majority of the time with pre-wired trailers. You will simply plug in the camera to the...
    view full answer...

  • Recommended Fifth Wheel Backup Camera for 2017 Forest River Surveyor 251RKS that is Prewired
  • For your 2017 Forest River Surveyor 251RKS that is prewired for a backup camera the kit you'd want is the part # FOS43TASF since it comes with the style of mount that your vehicle is designed to work with. There are videos on how to do this install on YouTube but we have not had the chance yet so I don't have a video I can send you from our site.
    view full answer...

  • Recommended Backup Camera and Cover for 2019 Forest River Rockwood Roo 183
  • For your 2019 Forest River Rockwood Roo that is prewired for a backup camera, I recommend the Furrion RV Observation System # FOS43TASF. This particular system is designed for trailers like yours that feature pre-wired connections. It includes a really nice, full-color LCD monitor and a waterproof camera with infrared LEDs to provide nighttime vision. I have attached a short video demonstration on this observation system that you can also take a look at. Based on my research, your...
    view full answer...

  • Recommended Observation Camera for Rockwood MiniLite 1909s
  • The camera system I recommend for your 21-foot Rockwood Mini Lite is the Furrion RV Observation Camera System # FOS07TASF. I recommend this particular one because it has a large 7-inch color monitor. The large monitor means you can see what's behind your trailer with just a quick glance, without having to take your eyes off the road for very long. This system features a waterproof night-vision camera that also includes audio so you hear as well as see what's going on around you. You...
    view full answer...

  • Recommended Observation Backup Camera System for 2018 Jayco Seismic Factory Prep
  • The camera systems compatible with your 2018 Jayco Seismic factory prep are the Furrion systems. We have 3 options for you that have the screen size in different sizes utilizing the same camera. The options are the 4.3 inch # FOS43TASF, the 5 inch # FOS05TASF, and the 7 inch # FOS07TASF.
    view full answer...

  • Recommended Second Camera For Wireless Rear View Safety Camera System
  • A second camera can come in a couple different forms I recommend for your system. The Rear View Safety Wireless Backup Camera - 130-Degree Viewing Angle, # RVS-DS1 is upgraded camera for the # RVS-2CAM system. However, the Rear View Safety Wireless Transmitter # RVS-DS can make any RVS wired camera function with the system. You should note this transmitter is not waterproof. For instance, the Rear View Safety Backup Camera - Surface Mount, # RVS-776 can be used with that transmitter...
    view full answer...

  • Recommended Best Observation Backup Camera System for View Behind Travel Trailer
  • To see behind your 2018 Keystone Springdale18 foot travel trailer, I recommend the Rear View Safety Backup Camera System with Trailer Tow Quick Connect Kit # RVS-770613-213. Because it is a hardwired unit, the pairing and connection are not an issue. If you prefer a wireless system that will require pairing, then I recommend the Voyager Digital Wireless Observation System - 5-5/8" LCD Monitor - Wireless Camera # WVOS541. Either the hardwired or wireless unit will need to capture...
    view full answer...

  • Installing Furrion Side Marker Light with Camera on 2019 Momentum 351M
  • The Furrion Side marker lights with camera # FCE48TASL you will have the running light wire (brown) camera power (red) and ground (black). Because it sounds like you have two sets of wires, it is likely one set is running light power and the other is the ground. You can use a circuit tester like # PTW2993 to determine function. Once you have done so, the brown and red wires connect to the running light power and the black will connect to ground. This will give you camera power as long...
    view full answer...

  • Backup and Observation Camera Compatible with Factory Pre-Wired Trailers
  • Your 2019 Prime Time Tracer Breeze 25rbs like many others is pre-wired by the manufacturer specifically for the Furrion Observation Camera System. We have three options available with the 5 inch monitor and the 7 inch monitor being able to do split screen for additional cameras where the 4.3 inch does not have that split screen option due to the monitor size. Here are the options: Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF Furrion...
    view full answer...

  • Recommended 4 Camera Constant On System with Quad Monitor
  • The Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 is the only system we have that comes with all 4 cameras and monitor to meet your needs. This system require each camera's power to be wired into the running lights so you will have constant power when the running lights are on. This is not a difficult installation at all and the cameras all have the infrared night vision integrated. I've attached the installation instructions to assist. If...
    view full answer...

  • Best Backup Camera for Towing with a 2018 Chevrolet Silverado 1500
  • I do have some great backup camera options for you but none of them would be able to be displayed on the dash of your 2018 Chevrolet Silverado 1500. If you don't mind using a seperate monitor then I recommend the Furrion RV Observation Camera System part # FOS43TASF for 4.3" screen, part # FOS05TASF for 5" screen, or part # FOS07TASF for 7" screen. The Furrion RV Observation Camera System is one of my favorites because of how well it performs. Infact, this is the same system that is...
    view full answer...

  • Comparing the Furrion RV Observation Camera System Part # FOS43TASF and Part # FOS07TASF
  • The camera included with the Furrion RV Observation Camera System part # FOS43TASF is the same as the camera induced with the Furrion RV Observation Camera System part # FOS07TASF. The only difference is that part # FOS43TASF has a 4.3" monitor and part # FOS07TASF has a 7" monitor. They will both work on your 2018 Jayco Eagle HT 29.5BHOK. I have attached a review video for you as well.
    view full answer...

  • Which Versions of the Furrion Observation System Can Show Multiple Camera Angles
  • The larger versions of the Furrion RV Observation Camera System # FOS43TASF can show multiple camera views at one time, but this model can only show one at a time. It can switch between different cameras though. The 5 inch display version part # FOS05TASF and the 7 inch version # FOS07TASF both can show multiple angles at the same time. I attached a picture that shows the grid of cameras it can display at any given time. I also attached a review video for more info on this setup for you...
    view full answer...

  • How Does Furrion Vision S Side Camera w/ Marker 2 Cameras # FOS07TASF Typically Wire
  • Your current clearance lights do only have a power and ground for the operation of just the light. The side marker Furrion cameras # FCE48TASL do have three wires. Two for the light operation which matches what your trailer lighting has and an additional power wire that the camera gets to power it. The camera shares the ground wire with the light.
    view full answer...

  • Camera Recommendation for 2015 Ram 2500 That Displays on Truck's Dash Screen
  • We have a similar camera setup that is designed to integrate the display into the dash of your 2015 Ram 2500. For that you'd want the Truck Bed Cargo Camera for Factory Monitor # 3460015 and you'd be set. Check out the review video I attached for this as well that shows how it installs.
    view full answer...

  • Can the Furrion RV Observation Camera System be Used with the Factory Monitor on a 2018 Ford F-150
  • The Furrion RV Observation Camera System part # FOS43TASF will need to be used with the monitor it comes with as it would not work with the factory monitor on your 2018 Ford F-150. Unfortunately, we do not have any backup cameras that will work with the factory monitor but we do have truck bed cameras that will if that is something you are interested in, the Truck Bed Cargo Camera part # 3460002 for 4.2" monitors or part # 3460001 for 8" monitors. Otherwise you could use something like...
    view full answer...

  • Furrion Backup Camera for Pre-Wired 2018 Jayco Eagle 29.5 BHOK
  • You can use either of two Furrion camera systems on your 2018 Jayco Eagle HT 29.5 BHOK, the # FOS43TASF with the 4.3-inch screen or the # FOS07TASF which uses the same camera but which has a larger 7-inch monitor and multi-camera capability. Both are ready for installation in your pre-wired Jayco. Please check out the linked videos to see more on the Furrion camera system. It is hard to see in the photo but if you have just a camera housing now then yes you'll have this part as an extra.
    view full answer...

  • Will Furrion Camera System Work with Pre-Wiring on 2019 Forest River Rockwood Ultra Lite 2608SB
  • Yes, the pre-wired camera system on your 2019 Forest River Rockwood Ultra Lite 2608SB is compatible with a Furrion observation system like the part # FOS43TASF with the 4.3" screen. Since it is a wireless camera system it is very easy to install. Simply install the camera to the existing bracket (attaching the power wire) and then connect the monitor to power and pair them! Please note that the 4.3" camera system is only compatible with one camera. If you would like to use more than...
    view full answer...

  • Compatibility of Furrion Ovservation Camera System with Older Furrion Camera Prewired Bracket
  • The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF, 5 inch # FOS05TASF, and 7 inch # FOS07TASF are all confirmed to fit your travel trailer mounting bracket. The difference besides screen size is the 5 inch and 7 inch options allow for additional cameras with quad view screen and have a microphone for hearing behind you when desired. The 4.3 inch monitor does not allow for these additional features. Sometimes the older prewired systems...
    view full answer...

  • Will the Furrion Camera FOS43TASF Work In Place of the FOS48TA-BL on a 2019 Stryker STG-3212
  • The Furrion RV Observation Camera System part FOS48TA-BL has been discontinued by the manufacturer. The correct replacement for this that will work with the bracket you have on your trailer is the Furrion RV Observation Camera System part # FOS43TASF. This system is also offered with a 5" monitor part # FOS05TASF and 7" monitor part # FOS07TASF. The 5" and 7" systems allow you to add up to three additional cameras, the Furrion Vision S Side Camera w/ Marker Light part # FCE48TASL for the...
    view full answer...

  • Camera System With Multiple Cameras
  • There are not any additional cameras available for the Wireless Observation System # 324-000002; I strongly recommend instead going with the Rear View Safety Backup Camera System with Side Cameras and Quick Connect Kit # RVS-770616-2133-NM. This system has three cameras - one rear view camera and two side cameras - so you will always have a reliable view. The system comes with a 7" color monitor and the back up camera has a 130 degree viewing angle while the side cameras have a 120 degree...
    view full answer...

  • How to Install Furrion FCE48TASL Side Cameras On RV with Diagram
  • To add two side cameras to your Furrion Vision S Wireless RV Backup Camera System with 7" Screen # FOS07TASF, you can use the Marker Light RV Side Cameras # FCE48TASL. I can understand your concern with the trailer having all LED lights, but it will not be an issue on an RV like yours which will provide more than enough power. So, the FCE48TASL install the same as any 2-wire (power and ground) side marker light, with the addition of the extra red wire to power the camera. I have...
    view full answer...

  • Can Furrion Vision S Work with 2019 GMC Sierra Using Lamp-Out Sensor
  • Yes, using the Trailer Connector Adapter w/ Lamp-Out Sensor Bypass # 20142 will allow the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF to work with your 2019 GMC Sierra. On a side note, the Furrion Vision S part # FOS43TASF you referenced comes with a 4.3" screen which is only compatible with 1 camera. If you go with the 5" Monitor Kit # FOS05TASF or the 7" Monitor Kit # FOS07TASF you will be able to add another 3 cameras. A popular option is to add the...
    view full answer...

  • Recommended Back-Up Observation Camera for Keystone Cougar
  • The best backup camera for your Keystone Cougar 326rds with bracket is the Furrion system. This is what your bracket is designed to work with. This system is available in the 4.3 inch screen # FOS43TASF, the 5 inch screen # FOS05TASF, and the 7 inch screen # FOS07TASF.
    view full answer...

  • Recommended Camera to Mount on Trailer for Highway Rear Viewing
  • I have the perfect solution for your towing situation! I recommend going with the Rear View Safety Universal Backup Camera System # RVS-770619N. It comes with a 7" monitor that replaces your current rear view mirror. The monitor can also be used as your normal everyday mirror due to the material of the screen. This comes with one camera and 66' of cable. Simply connect the power to a circuit that either turns on when your Ford Focus is started, or that is connected to the running...
    view full answer...

  • Observation Camera Kit Recommendation for 2019 Jayco 212QB Travel Trailer
  • The Furrion observation systems like the part # FOS43TASF that you referenced is designed specifically for the shark fin mount you have on your 2019 Jayco 212QB. You'd simply just have to connect the wiring of the camera to the wiring present and you'd be set. The activation circuit that's there on your trailer is the running light circuit which means anytime you turn on headlights or running lights you'll be able to see behind you. This kit has a 4.3 inch screen. For a larger 5 inch...
    view full answer...

  • Furrion Observation System Monitor Goes Blank With WiFi Signal Turned On
  • The reason you are having an issue with the Furrion RV Observation Camera System part # FOS43TASF while connected to WiFi in your Chevrolet Silverado is because they both operate off of radio waves that use the same frequency. Therefore, whenever you turn your truck on and the WiFi signal activates the monitor will lose signal because it picks up the radio frequency from the WiFi instead of the radio frequency from the camera. In order to use the Furrion RV Observation Camera System...
    view full answer...

  • Which Back-Up Cameras are Compatible with the WVOS541 Wireless Observation System?
  • We do have a compatible camera, but I spoke with my contact over at ASA Electronics and unfortunately the # VCMS20B is not going to be work because of the way the video that is transmitted. Because one system uses digital video and the other uses analog, the only compatible camera with the # WVOS541 system is going to be the # WVCMS130AP.
    view full answer...

  • Recommended Camera System for Pre-Wired 2020 Winnebago Minnie Plus
  • Your 2020 Winnebago Minnie is pre-wired for a Voyager Camera System and I specifically recommend the Voyager WiSight Wireless RV Backup Camera # WVHS541. This system features a 5.6" full color LED monitor for a clear vision of what's behind you and a waterproof camera with 14 integrated LED lights for night time vision. This will plug right into the pre-wired bracket on your Winnebago but it's going depend on exactly how yours is set up as to whether it will function only as a reverse...
    view full answer...

  • Voyager WVOS43 and WVHS43 Systems
  • I spoke with the manufacturer and the short answer to this question is no, the cameras aren't going to be interchangeable. The main reason is that the WVH100 camera that comes with the # WVHS43 is meant for certain RVs that are pre-wired with the Voyager Wi-Sight technology and will mount differently than the WVCMS130AP camera that comes with the # WVOS43 system. The other reason that this is not advised is that per the manufacturer, rewiring the systems would void any warranty associated...
    view full answer...

  • Which Furrion Observation System Fits Little Guy Mini Max Prewired for Furrion
  • The Furrion Vision S is the current version of the Furrion observation systems and the Vision 2 is the older and now discontinued F0S48TAPK. For the Little Guy Mini Max the # FOS43TASF will fit and work well since it is pre-wired for a Furrion kit like this. I attached an install video for this kit for you to check out as well.
    view full answer...

  • Replacement Antenna for Furrion Observation System Monitor
  • The replacement antenna you need for your Furrion monitor is the part # 772577.
    view full answer...

  • Backup Camera Recommendation for 2019 Coleman LT 18 Travel Trailer
  • Your 2019 Dutchmen Coleman Lantern LT Travel Trailer was pre-wired for a Furrion observation camera system like the part # FOS43TASF that you referenced. If you go with the 5 inch display version part # FOS05TASF or the 7 inch part # FOS07TASF you can have side cameras added with the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL so this would be what I recommend.
    view full answer...

  • Wiring Installation Options for Voyager Camera Model VCAHD140I
  • Attached you will find a image of the Voyager camera model # VCAHD140I which I acquired on the ASA Electronics website; ASA is the distributor from whom we source this camera. This night-vision-capable rear camera has a waterproof white aluminum housing, mounts easily with 2 included screws and provides a 140-degree viewing angle. Like other RV cameras this Voyager model can be wired to an RV's reverse light circuit so it functions only in reverse as a backup camera, or it can be wired...
    view full answer...

  • Installation of Forest River Trailer Camera System with Ford Dash Monitor Connection
  • There is really only one wiring harness compatible with your 2019 Ford F-250 truck monitor and it is for the truck bed cargo camera that installs behind the 3rd brake light. If you use this harness, then you can install a wireless harness for connection to your trailer because there isn't a wireless receiver option. If you have the 8 inch factory monitor use the Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit # 3460001. If you have the 4.2 inch monitor use # 3460002. Then...
    view full answer...

  • Can More than One Furrion Camera Pair to Furrion Monitor
  • Yes, since the cameras pair to the monitor you can pair more than one to the same monitor with the Furrion RV Observation Camera System # FOS43TASF. For additional cameras we have the part # FCN48TASF.
    view full answer...

  • Can Furrion Wireless RV Camera System # FOS43TASF Be Continuously Powered
  • The Furrion Wireless RV Camera System # FOS43TASF referenced in your question can certainly be used as an observation system so that it stays on as long as you are driving (and not just when going in reverse). To do this you will simply need to wire the camera to a constant power source on the vehicle such as the running lights circuit. This will not harm the camera or monitor in any way.
    view full answer...

  • Wireless Backup Camera that is Android Compatible and Waterproof
  • We have a few wireless cameras that can display on an Android device. First we have Rampage Wireless Backup Camera for Smartphone or Tablet - iOS or Android Item # RA7710. But this camera was not designed to be waterproof or resistant so it doesn't have an IP rating. Next we have Rear View Safety WiFi Hitch Backup Camera System - Wireless Item # RVS-83112-WIFI. Unlike the above camera this one carries an IP68 rating which means it is dust tight and it is waterproof up to 3 meters of...
    view full answer...

  • Replacement Observation Camera for Older Model Furrion System
  • The Furrion Vision S Rear Camera w/ Sharkfin Bracket # FCN48TASF is the camera replacement you need for your system. It will be compatible and give you a clear picture with the 120 degree viewing angle. The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 4.3" Screen # FOS43TASF replaced the FOS48TAPK-BL model.
    view full answer...

  • Observation Camera System for 2018 Ram Longhorn Laramie and Trailer
  • Based on what you were checking out it looks like you are in need of an observation camera for your 2018 Ram Longhorn Laramie pulling a trailer, and we have exactly that. I strongly recommend the Rear View Safety Backup Camera System - 2 Camera Setup # RVS-770614 or for more viewing options, the Rear View Safety Backup Camera System - 4 Camera Setup - Quad View Monitor # RVS-062710 because they give you a full range of viewing with a large 7 inch color monitor and night vision so you...
    view full answer...

  • Furrion Backup Camera for 2014 Rockwood 5th Wheel and 3rd Brake Light Camera for 2012 Ram 2500
  • I believe that you are correct about the wiring you found. You would want to test it with a circuit tester # PTW2991 though before installing the Furrion RV Observation Camera System # FOS07TASF as I am not sure what the wiring layout is for your 2014 Rockwood Signature Ultra Lite 8289WS 5th wheel. You definitely can use the Truck Bed Cargo Camera for Factory Monitor # 3460015 which comes with the toggle switch so you can choose which camera input you want to view on your factory in-dash...
    view full answer...

  • What Size Ball Is Used On the 5 Inch Furrion Vision S Wireless RV Backup Camera System
  • In regards to the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS05TASF and part # FOS07TASF, the diameter of the ball on the suction cup mount (Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera System part # LC776461) is .85". In regards to the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision part # FOS43TASF, the diameter of the ball on the suction cup mount (Replacement Suction Cup Mount for Furrion Vision S...
    view full answer...

  • Does Voyager WiSight RV Observation Camera System # WVHS43 Have Gridlines
  • The Voyager WiSight RV Observation Camera System # WVHS43 that you referenced does not have gridlines. Since this is designed as an observation system and not strictly a backup camera the gridlines are not present as that's typically only seen on backup only camera setups.
    view full answer...

  • Can Furrion Camera System with 7" Screen be Used as Monitor While Camping
  • You absolutely can use the Furrion Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-07 while you're camping! Just make sure that you have your cameras hooked up to a power source that can be utilized when you are disconnected from the truck as most pre-wired camera systems are tied into the reverse lights. You can also add another camera with part # FCN48TASF if you'd like to add one over your door or another spot on your camper for more...
    view full answer...

  • Backup Camera System Recommendation for 35 Foot Class A Motorhome
  • I have the perfect solution for fitting your 35 foot class A motorhome with a backup camera system. The Rear View Safety Backup Camera System with Side Cameras, # RVS-770616N, will give you the visibility you need. I personally prefer the wired systems because you don't have to deal with any interference and have a reliable system when you need it. The 2-color CCD side cameras have 120 degree viewing angle and use 9 infrared lights per camera for 30' of infrared night vision . The heavy-duty...
    view full answer...

  • Troubleshooting Voyager Camera That Isn't Getting Power
  • Try checking the wiring that your camera was connected to. The red wire for the camera should be connected to power while the black wire should be to ground. Make sure that when your trailer is connected to your tow vehicle that there is power getting to the red wire, you may need to put the vehicle in reverse or turn your headlights on to see any power. If there isn't then any power then you know that the wiring on your trailer is the problem but if you do get power then the camera may...
    view full answer...

  • Can Monitor of the Voyager WiSight RV Observation Camera be Hardwired
  • The monitor of the Voyager WiSight RV Observation Camera System w/ Monitor and Mount # WVHS541 does need to be plugged into the 12V DC plug as opposed to being hardwired. I have added a link to a video review of this easy-to-use observation system for you to take a look at.
    view full answer...

  • Voyager WiSight Rear Observation Camera for PreWired Coachmen Trailer
  • I checked with the manufacturer and the correct kit for your Coachmen trailer is the Voyager WiSight RV Observation Camera System w/ Monitor and Mount - Wireless - 4.3" Screen # WVHS43. or you can use the kit with the 5.6" screen, which is part # WVHS541. According to the manufacturer, Jensen, if you simply remove the plate that says "Voyager" on the rear of your trailer and there will be a 12 volt DC socket which you will plug the camera into. I recommend verifying that socket is...
    view full answer...

  • Comparing the Voyager WiSight # WVHS43 and # WVOS43 Camera Systems
  • The difference between the Voyager WiSight # WVHS43 and # WVOS43 is the camera. The HS43 has a camera with a 135-degree viewing angle, comes with a bigger mounting bracket, and is IPX6-rated to protect against high-pressure, heavy sprays of water. The OS43 has a camera with a 100-degree viewing angle, comes with a smaller mounting bracket, and is IP69-rated to protect against close-range, high pressure spray downs. Aside from that these are the same systems. I have attached some...
    view full answer...

  • Best Back-Up and Observation Camera for 2019 Grand Design Fifth Wheel Trailer
  • The best back-up and observation camera for your 2019 Grand Design Solitude 310GK is the Furrion RV Observation Camera System # FOS07TASF because its camera and 7 inch monitor combine to offer you the clearest view no matter the weather or what time of the day - or night - it is. The monitor is 7 inches which is large enough to ensure you aren't going to have to squint or struggle to see what is being shown; you can even adjust the brightness and color for that perfect view. The monitor...
    view full answer...

  • Control Button Location for the Furrion RV Observation Camera System with 4.3" Monitor
  • The location for the Furrion RV Observation Camera System Monitor # FOS43TASF are on the side. The pictures that you are seeing with the buttons on the front are older versions of this same camera system which is why they are slightly different. If you would like a similar camera system from Furrion then I recommend the kit # FOS05TASF. This comes with a 5" touch screen so that you can configure your settings on the face of the monitor as opposed to the side. A review of this system...
    view full answer...

  • Replacement for Stolen Furrion Camera System
  • I'm very sorry to hear that your monitor was stolen; unfortunately we do not offer a replacement monitor alone for a Furrion system so the best option we can give you is a new system, the Furrion Vision S Wireless RV Backup Camera System # FOS43TASF.
    view full answer...

  • Can Voyager Camera Display On Existing Monitor in Ram Truck
  • The Voyager WiSight Wireless RV Backup Camera # WVHS43 is designed for pre-wired RVs like the Minnie Plus it does come with it's own monitor, unfortunately there is not a way to connect it to your existing display in the 2019 Ram 1500 Limited. I wish that there were a way because that would be much more convenient.
    view full answer...

  • RV Observation System Recommendation that Has Great Reception
  • A more reliable backup camera would be what I recommend over the Buyers Products RV Observation Camera System # 3378883200 that you have. For that I recommend the Furrion Vision S system part # FOS07TASF instead as it has rock solid reception and will work great for you. The range of this is 492 feet so it would easily work for you. This setup is considered by most who tow to be the best around since it works so well so we recommend it highly.
    view full answer...

  • Observation Camera System for Winnebago with Factory Mount
  • I can confirm for you that the Voyager WiSight RV Observation Camera System w/ Monitor and Mount # WVHS541 consists of: - Voyager WiSight RV Observation Camera # WVH100 - Voyager LCD Monitor # WVOM541AP This is the exact camera you are looking for, along with the 5.6" monitor, packaged together. I have added a link to a video review for you as well.
    view full answer...

  • Does Plate Need to be Removed from 2019 Winnebago to Install Voyager WiSight Camera System
  • Yes, according to Voyager if you remove the plate there should be a 12V socket that you plug the camera from the WiSight # WVHS43 directly into and then mount the camera with the same screws that were used to hold the plate in place. Attached is a review video for you to reference as well.
    view full answer...

  • Range of the Furrion Camera System with the 4.3 Monitor
  • The Furrion RV Observation Camera System w/ Monitor and Bracket part # FOS43TASF has a range of 150'. This is the newer Furrion system with the 4.3" screen.
    view full answer...

  • Troubleshooting Furrion Observation Camera Not Activating on Trailer Due to Low Voltage
  • The best solution for your problem is to address why your trailer's running light circuit has too low of voltage for the Furrion camera to function. Most likely the wiring of your running light circuit needs to be replaced with a heavier gauge wire. It sounds like the resistance of longer wiring has lowered the voltage which is causing the problem you mentioned. You most likely have 16 or 18 gauge wire ran for this circuit. I'd replace it all with 14 gauge wire like the part # DW02412-1...
    view full answer...

  • Trailer BackUp Camera System that Can Display on Smartphone
  • We do have a camera setup that can be used wirelessly that would display on a smart phone, but the part # WVH100 cannot. Instead you'd want the Rampage Wireless Backup Camera # RA7710 which can be used with Android and iOS devices. I attached a review video for this for you to check out as well.
    view full answer...

  • Best Observation Camera for a Grand Design Imagine
  • I do have an option for you but the Furrion RV Vision 2 Observation Camera System is no longer available as it has been replaced by the Furrion RV Vision S Observation Camera System. Also, the Vision 2 did not contain a 360 degree camera nor am I aware of one that is available for trailers but that is certainly an innovative idea. I recommend the Furrion RV Vision S Observation Camera System part # FOS05TASF for a 5" screen or part # FOS07TASF for a 7" screen as this will then give you...
    view full answer...

  • What Backup Camera is Needed for a 2018 K-Z Sportster 321THR13
  • I believe your 2018 K-Z Sportster 321THR13 is prepared for a Furrion RV Observation Camera System judging by the looks of the camera mounting bracket. If that is the case then you will want to use part # FOS43TASF for 4.3" monitor, part # FOS05TASF for 5" monitor, or part # FOS07TASF for 7" monitor. The Furrion RV Observation Camera System comes with a camera mounting bracket, camera, and monitor. If your K-Z Sportster already comes with the mounting bracket and camera then all you would...
    view full answer...

  • How to Pair Drive/Way Interglobal RV Observation Camera to Monitor
  • I checked with Drive and this is the pairing instructions they gave me for the part # 324-000002 that you referenced: To pair the camera with the monitor, the camera must be completely powered off. Go through the sync process on the monitor and when the Icon starts to flash then put power to the camera and it should pair up. The camera is normally wired into the running lights of the camper so to turn power off to the camper you should be able to just turn the running lights off.
    view full answer...

  • Observation Camera for 2018 Keystone Passport Grand Touring 2400BH
  • The observation camera that will work with your 2018 Keystone Passport GT is the Furrion RV Observation Camera System w/ Monitor and Bracket # FOS43TASF. The Furrion Observation camera system has a camera that has a shaded design so glare in the bright sun won't be a problem, and also has infrared so you can use it without issue after the sun goes down. The camera is also waterproof so no matter the weather it will give you a durable, effective way to observe what is happening behind...
    view full answer...

  • Can Drive Wireless RV Backup Camera System # 324-000002 Fit 2019 238 RK Gulfstream Ameri Lite
  • The Drive Wireless RV Backup Camera System # 324-000002 that you referenced can fit your 2019 238 RK Gulfstream Ameri Lite but you would need to cut off the connector you sent a picture in to wire it to the included connector that comes with this kit. It's not difficult to do this at all but just an additional step.
    view full answer...

  • Furion Observation Camera Recommendation for 2019 Jayco Eagle 5th Wheel
  • For your 2019 Jayco Eagle that is pre-wired for a Furrion camera the Vision S kit part # FOS07TASF that you referenced is a confirmed fit and would work well. This kit gives you a 7 inch screen monitor to easily view behind the camper. Check out the review video link I attached for more info as well. The camper in the video is a 2017 Jayco Jay Feather similar to yours.
    view full answer...

  • What Back Up Camera Do I Need for a 2020 Grand Design Solitude
  • The 2020 Grand Design Solitude is pre-wired for the Furrion Digital Wireless Observation System. This system is offered with a 4.3" monitor part # FOS43TASF, 5" monitor part # FOS05TASF, and 7" monitor part # FOS07TASF. The 5" and 7" systems allow you to add up to three additional cameras, the Furrion Vision S Side Camera w/ Marker Light part # FCE48TASL for the sides of the trailer and the Furrion Vision S Rear Camera w/ Sharkfin Bracket part # FCN48TASF for the rear of the vehicle or...
    view full answer...

  • Rearview Safety Backup Camera Kit Recommendation with Quick Disconnects for Use with Trailer
  • There's actually a version of the Rearview Safety Backup Camera kit part # RVS-770614 that comes with a quick disconnect kit for trailer applications like what you mentioned. For that you'd want the part # RVS-770614-213 instead. I attached a picture of what the quick disconnects look like as well. These allow you to easily disconnect the camera wiring of the trailer from the vehicle.
    view full answer...

  • Can the Furrion 5 Vision S Camera be Installed in Place of Center Light on a 2018 Jay Flight
  • Yes, your 2018 Jayco Jay Flight 267BHSW has the provisions for installing the camera that comes with the Furrion RV Observation Camera System # FOS05TASF in place of the center marker light. I have attached a photo and installation video of us installing this on a 2017 Jayco Jay Feather as an example. This system can be upgraded to a 4-camera system if you add the Furrion Vision S Side Camera w/ Marker Light Bracket # FCE48TASL and the Furrion Vision S Rear Camera # FCN48TASF.
    view full answer...

  • Can the Rear View Safety Backup Camera System be Set to View All 3 Cameras When Not in Reverse
  • You definitely can install the Rear View Safety Backup Camera System # RVS-770616N so that the side and rear cameras are constantly on while your combine is on. Instead of hardwiring them to a reverse light circuit simply connect them to a circuit that gets hot when you start your combine up. If you are wanting a little more versatility with the side cameras then you could use the system # RVS-770615 instead. This comes with 3 cameras that are the same style as the backup camera and...
    view full answer...

  • What Backup Camera Is Needed for a Palomino Puma Travel Trailer
  • Yes, but there is only one system that will work on your Palomino Puma Travel Trailer, the Furrion Vision S Wireless RV Backup Camera System. This system is offered with a 4.3" monitor part # FOS43TASF, 5" monitor part # FOS05TASF and 7" monitor part # FOS07TASF. These three system will all be plug and play. If you like you can add up to three additional cameras to the systems with 5" or 7" monitor, the Furrion Vision S Wireless RV Backup Camera part # FCN48TASF for the truck or wherever...
    view full answer...

  • Does Camera Observation System of 2018 Tie Into Running Light Circuit
  • The pre-wiring of your 2018 Jayco for an observation system is tied to the running lights for activation of the camera. This allows the camera to be turned on whenever you want by switching on the running lights. The Furrion system part # FOS05TASF that you referenced is the correct kit for your Jayco and will easily attach to the bracket on the back of the RV. I attached an install video for this kit on a similar 2017 Jayco for you to check out as well.
    view full answer...

  • Way Interglobal CL-718W-D7 Camera on 2019 Gulf Stream Vintage Cruiser
  • The Wireless Observation System w/ LED Monitor - 7" Screen # 324-000002 is able to support multiple cameras. The system comes with one camera so you would need to purchase additional cameras as desired. I've attached a video of this product to further assist. Unfortunately we don't have any additional cameras to offer you at this time for the system. The Gulf Stream Vintage Cruiser like many other models are prewired for camera systems and if you already have the bracket and mount...
    view full answer...

  • Will Furrion Vision S Observation Camera Fit Pre-Wired 2018 Reflection Grand Design
  • Yes it will! Thanks for the photo and the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 5" Screen # FOS05TASF will absolutely work with your 2018 Reflection Grand Design that is pre-wired with the camera housing you have. I have added a link to a video review of this system for you to check out as well.
    view full answer...

  • Does the Furrion RV Observation Camera System Display in Mirror Mode?
  • The Furrion RV Observation Camera System w/ Monitor and Bracket - Wireless - 7" Screen # FOS07TASF is designed to display the mirror image for a precise view from the driver's perspective. This will show traffic on the left side on the left side of the monitor as you stated.
    view full answer...

  • Recommended Backup Camera for Pre-Wired Keystone Laredo
  • For your Keystone Laredo that is pre-wired for a backup camera the Furrion RV Observation Camera System # FOS43TASF will work perfectly. This system is specifically designed for pre-wired trailers like yours and it includes a really nice 4-5/16 inch full-color LCD monitor and a waterproof camera with a shaded design to reduce glare. The infrared LEDs on the camera housing also provides great nighttime vision.
    view full answer...

  • Should RV Security Camera Have Power at All Times
  • A security camera system, as opposed to a backup camera like # RVS-770 that only operates when the vehicle is in reverse or an observation camera like # FOS07TASF that you can turn on when you want to, will need constant power to give you its security benefit. Many RVs like your triple-axle Cyclone are now coming pre-wired for this important feature. It would be possible to place a switch in the camera power circuit but this would mean you run the risk of having the system off when you...
    view full answer...

  • Furrion Camera System for Pre-Wired Heartland Pioneer 5th Wheel
  • Makers of aftermarket and OEM camera systems do not design their products to be compatible with components from other brands so a camera from brand A will not pair with a monitor from brand B. The Furrion factory pre-wiring on your Heartland Pioneer is not universal either so you'll need to select a Furrion system like # FOS43TASF to take advantage of that convenient pre-wiring feature.
    view full answer...