Filter Questions and Answers:

reset filter

Expert Answers about RV and Camper Steps


  • Manual RV Steps for 24 Inch Wide Door Frame with 6 Inch Rise/Drop Between Steps
  • Thank you for all the information; that allowed me to do quite a bit of research. To answer your questions in regard to the Lippert SolidStep, there isn't a 4-step version of # LC698799, which is a triple step that fits 24 inch wide door frames. Additionally, there isn't an option to add an extra step, nor are they sold separately. Therefore, according to my contact at Lippert, if you were to take on such a project, you'd need to provide your own parts and come up with a plan to execute...
    view full answer...

  • Lippert SolidStep Fit for 28 Inch Wide Door and 38 Inch Entry Height
  • The best Lippert SolidStep for you RV with a door frame that measures 28 inches and an entry height of 38 inches is the SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames # LC791574, which, as you can see by the name of the product, is perfect for your 28 inch door frame. It is also designed to fit entry heights between 35 inches and 44 inches, which it can do because it has adjustable let extensions. These steps do not come with mounting hardware but you will only need...
    view full answer...

  • Motor Replacement for Kwikee Step Motor Number 903209000
  • Are you sure that's the number you found? I can't find any references to it anywhere.
    view full answer...

  • Solution for Kwikee RV Electric Steps that Work in Reverse After Installed
  • We're familiar with this issue which happens when the incorrect switch is used. Kwikee Steps use two different magnetic switches. One is a normally open circuit and the other is normally closed circuit. The switch must match the controller. Otherwise, the steps will work in reverse, as you described. The original switch kit included with the newer Kwikee 32 Series Electric RV Steps # LC372261 is an open circuit. The two magnetic sensor tabs mount in the doorframe and on the door. When...
    view full answer...

  • Lippert Solid Step Quad Steps Compatibility with Thresholds
  • By threshold I assume you are either talking about threshold height or how the SolidStep fits on a threshold. If it was the latter then these steps do need to rest on the threshold of the door frame; I have added a cut out of the instruction manual and if you read the part that says "NOTE" you will see where it specifies this. If you were talking about threshold height or doorway width, that is much simpler and will only require you to take a couple measurements. The SolidStep...
    view full answer...

  • What is the Difference Between Kwikee Steps # LC3747453 and # LC3747452
  • The difference is that the part # LC3747453 comes with the Adapter/Harness # LC369413 and the Switch Magnet # LC369299 while part # LC3747452 does not. Aside from that these are the same step.
    view full answer...

  • Will Torklift RV GlowSteps TLA7834 Fit 2017 Forest River Flagstaff Classic 832BHDS
  • To determine if you are able to replace your 3-step unit with a 4-step unit like # TLA7834, you will need to take a few measurements as RV steps are not custom to the year, make and model of a specific RV. Measure from the ground to the top of the threshold on your RV to determine how much ground clearance you have. The Torklift Steps require ground clearance between 31 and 42 inches. The mounting bracket base dimensions for the Torklift GlowSteps are 21-1/2" wide x 14-1/2" tall x...
    view full answer...

  • 2 Step Solution For A Forest River Wildwood 171RBXL
  • For your Forest River Wildwood X-Lite 171RBXL you are looking for the SolidStep Manual Fold-Down Steps as your solution. Which part number you need will depend on your doorway width. If you have a door frame width of 26" - 29-7/8, you'll want the 26" - 29-7/8" Wide RV Door Frames part # LC733931 or part # LC713662 for 24" wide door frames. Included is an installed example for reference.
    view full answer...

  • Handrail For Use With Lippert SolidStep Entry Steps
  • We do have handrails that are going to allow for an easier way for your mom to get up the steps and into your 2016 Heartland Cyclone, the issue with changing from the Lippert SolidStep Manual Fold-Down Steps # LC791574 to a TorkLift GlowStep is the mounting brackets because none of the GlowSteps share the same mounting bracket dimensions as the Lippert steps. What I recommend instead is keeping your current steps and instead adding a very good handrail, the Lippert Entry Assist Handrail...
    view full answer...

  • Difference Between Glowstep Stow n Go Steps and Revolution Steps
  • Essentially it's how the two scissor steps store. The part # TLA7844 stores more like a traditional scissor step seen typically at the back of truck bed campers while the # TLA8004 stores more like what is seen on the side of campers. Since you have a Grand Design Reflection 337rls the part # TLA8004 would be the better option.
    view full answer...

  • Can Stow N' Go Scissor Steps be Installed on Camper Without a Bumper
  • While we do not have a video of these steps being specifically installed on your camper I took a look at the instruction manual, which is also linked, and there is a method for installing these steps on a camper that does not have a bumper. You would need to remove your current bracket and it would require a 19.5" x 3.5" mounting area below the door. The mounting bracket for each of these steps is 21-1/2" wide x 8-1/2" deep but its height is going to differ depending on the model you...
    view full answer...

  • How To Measure Doorway Width for Lippert SolidSteps On a Grand Design Solitude
  • In order to choose the correct SolidStep Manual Fold-Down Steps you will need to measure the opening of your doorway inside the trim pieces. I have attached a photo to show this. If the threshold height is over 35" when measuring from the ground while level to the bottom of the doorway then you can indeed use a quad step. For this we have part # LC678025 for 26" doorways, part # LC791574 for 26"-30" doorways, and part # LC791575 for 30" - 36" doorways.
    view full answer...

  • Recommended Lippert SolidStep for a 2014 Keystone Montana 3402RL
  • I am not sure who you spoke with at Lippert but what they told you about using the 26" wide SolidStep # LC791574 was incorrect. When I spoke with my contact he said that whether you have the 29-3/8" or 28-1/4" wide frame you want to use the 30" SolidStep # LC791575 that we referenced in a previous answer. Reason being that there is no SolidStep for a 29" wide door frame so you simply round up. When the SolidStep first came out there was conflicting information regarding fits but I believe...
    view full answer...

  • Picking Out Correct Lippert 2-Step SolidStep Assembly for 2018 Rockwood Mini Lite Trailer
  • The Lippert SolidStep Fold-Down Steps like the 2-Step # LC733931 you were looking at are designed to fit specific doorway widths. Unfortunately trailer manufacturers don't make dimensions like this available so you will need to take a quick measurement of the inside door width on your Rockwood Mini Lite to determine the correct model. This particular SolidStep model will fit doorway widths of 26" to 29-7/8". Also make sure that your entry height (height from the ground to the door)...
    view full answer...

  • Availability of Travel Trailer Fold Down Steps for 24 Inch Wide Doorways
  • A version for a 24 inch doorway is indeed available. The Lippert # LC698799 is designed to fit a 24 inch doorway, the Lippert SolidStep is definitely the nicest manual step we offer. As you can see in the linked video, the install is very simple and the steps are the most solid option available for secure footing when entering and exiting your travel trailer. The steps themselves have an 8 inch rise and are designed for a 27 to 36 inch entry height. If your entry height is 22 to 28...
    view full answer...

  • Picking Out Torklift Glow Step That Fits Lance Model 1475
  • The TorkLift GlowStep Revolution Scissor Steps # TLA8004 that you referenced are designed to fit entry heights on RVs that are between 32-1/2 and 44 inches which which might be a little higher than what you have on your 2018 Lance 1475 based on the pictures I was able to find online of it, we don't have a way to get the exact threshold height of your RV so you'll have to take a quick measurement to verify. If you find you have lower height we have the part # TLA8102 which has two steps...
    view full answer...

  • Do Fold-Out Steps Need to be Removed When Mounting Brophy Scissor Steps
  • That is a good question, and you can leave your current fold-out steps up and in the folded position when installing the mounting bracket of the Brophy Scissor Steps. The reason is, the bracket will be installed just underneath the door so as long as when your steps are folded up there is no interference in that area the Brophy steps will be a great option. I added a photo for you a customer sent in which shows the bracket and steps installed so you can get an idea of how they mount. The...
    view full answer...

  • TorkLift GlowStep Steps That Store Under Grand Design Reflection
  • The TorkLift GlowStep Stow N' Go part # TLA7843 are stored on the side of your camper attached with a bracket like in the photo I have attached. They do stick out on the side. You would need the GlowStep Revolution Scissor Step for it to store under the Grand Design like what you have now. I recommend TorkLift GlowStep Revolution part # TLA8004 for the Grand Design Reflection. Torklift has told us that the TLA8004 replaces the 3 step assembly on the Grand Design campers. However, I do...
    view full answer...

  • Comparing Camper Scissor Steps Brophy AS24 vs. Torklift TLA7804
  • Both the Brophy # AS24 and the TorkLift # TLA7804 are easily removed when not in use- and it's actually recommended that you do so. Additionally, they both weigh in around 26-lbs total, so they're easy to move on and off; so they'd both be great choices for what you're looking for. Overall I prefer the TorkLift # TLA7804 because of the quality of TorkLift products in general, plus you'll have the ability to add the All Terrain Landing Gear for TorkLift GlowStep Scissor Steps for RVs...
    view full answer...

  • Torklift GlowStep Replacement Support Bracket and Bolt
  • I have a solution for you but we don't have a replacement bracket to replace the support and bolt that was broken on your TorkLift GlowStep similar to the # TLA8004 . Instead you would need to use the Add-A-Step for TorkLift GlowStep Revolution Scissor Steps # TLA8101 which will work on any TorkLift GlowStep models with the 25-7/16" wide mounting base. You can use the parts in this kit to replace your broken parts or replace an entire step. If you have the 27-7/16" mounting base model...
    view full answer...

  • Which Lippert SolidStep 4 Step for RV Doorway Width that's 29-1/2 inches
  • Since your door opening is 29-1/2 inches wide the correct Lippert Solidstep 4-step setup is the part # LC791574 that you referenced. A great option to go with this is the lift assist part # LC733937 which takes all of the weight out lifting and lowering the Solidstep!
    view full answer...

  • Can the GlowStep Camper Scissor Steps # TLA7805 be Used on an Eagle Cap 1200 Truck Bed Camper
  • Yes, since the mounting bracket for the TorkLift GlowStep Camper Scissor Steps # TLA7805 can be mounted under your door this will reduce the distance for that last step into your camper. I went out to the warehouse and found that the mounting bracket for the steps measures 1" tall and 20" long. Just be sure that this can fit under your door and that there is a solid place for the screws to install into for a secure connection (see attached installation instructions). Please note that...
    view full answer...

  • Does TorkLift GlowStep Revolution Scissor Step TLA8004 Include Mounting Hardware
  • The TorkLift GlowStep Revolution Scissor Step # TLA8004 does include the hardware to install the mounting base on the frame of your Grand Design 5th wheel. The hardware is shown in the linked photo. The included video highlights the step's features and shows the installation. The specific RV shown has vertical step mounting studs so it also required Vertical Stud Adapter Bracket Item # TLA8022.
    view full answer...

  • Troubleshooting Kwikee 42 Series Step that Motor Continues to Run for 2-3 Seconds After Steps Extend
  • It could be that your Kwikee Series 42 Steps # LC372779 are just hanging up and bit and could use some lubricating spray on the gears; you'll want to use a dry silicone spray on these parts similar to the Roadmaster Lube Master # RM-747 to keep everything in working order. With that being said, this is also a sign that the motor on your Kwikee Series 42 steps could be weakening, so you'll want to keep an eye on this going forward. If it ends up that the motor goes out on your steps...
    view full answer...

  • Replacement Parts for Kwikee Series 26 Steps
  • We have several replacement parts for the Kwikee 26 Series steps depending on what you need. We have some different switch kits, # LC371010 and # LC369311, so if you believe the switch is the problem select the one that matches what you have. We also have Link Assembly C and 9510CU # LC379801 which is pretty much all of the electrical and mechanical components that operate the steps.
    view full answer...

  • Recommended Replacement Steps For 2017 Forest River Sandstorm 27
  • I can absolutely recommend a set of replacement steps for your 2017 Forest River Sandstorm 27 but you will need to do a quick measurement of your entry height to confirm the correct model as we unfortunately do not have a way of checking the entry height on your RV. I recommend the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear which you will need # TLA8104 if your entry height is between 32-1/2" - 44", # TLA8103 if your entry height is between 25-1/2" - 36", or # TLA8102...
    view full answer...

  • Replacement Kwikee 28 Series Step for Part 902809025
  • The correct replacement step for your 28 Series Kwikee step with the part 902809025 is actually listed as part # LC3747453 on our site. If you are just needing the replacement frame for this step it is part # LC3747457 while the replacement step motor kit is part # LC379608.
    view full answer...

  • Recommended TorkLift Steps for Palomino SS1240 Pop Up Camper
  • I have a solution for you, but the TorkLift # TLA7843 require much more mounting space than you've got available on your 2020 Palomino SS1240. Because of the limited mounting space under your door, you'll need to use something similar to the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide # TLA7804-8000, which has a very narrow mounting bracket that is 1" tall x 20" long and will work well in the limited space you've got on your Palomino SS1240 camper. I...
    view full answer...

  • Installation Bracket Locations for Lippert Victory Fold-Down Steps
  • The Victory Step Manual Fold-Down Steps for RV and Toy Hauler Patios - Quadruple - Aluminum # LC726895 you asked about will only allow for about 3 inches from the edge. For your application you would either need to add a piece that is hinged to flip out over the door frame or add a piece to the outer door frame to hold the brackets and weight. This could look similar to the Lippert Components Garage Storage Brackets for Victory Step Manual Fold-Down RV Steps - Wall Mount # LC726890 but...
    view full answer...

  • Difference Between Kwikee 40 Series RV Steps # LC3726892 and # LC3726891
  • There is a slight difference between the # LC3726892 and # LC3726891. The # LC3726892 comes with a control switch setup that allows the light and step to come on and off with the opening and closing of the door.
    view full answer...

  • Solid Step Fold-Down Steps for RV Compatibility with Screen Door Bar
  • The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Quad - Aluminum # LC791574 will work fine with most screen door bars like the Camco Deluxe RV Screen Door Cross Bar - 21-1/4" long to 28-5/8" long - Aluminum - Black # CAM42183 that sounds similar to your description. You won't have issue with the bar if it is just above the plastic bubble cover slide as you stated.
    view full answer...

  • Which Torklift GlowStep Set Would Work Best on Doorway Height of RV that is 40 inches
  • Thanks for the pictures of your steps on your RV. Right now it looks like you have the Lippert Manual Pull Out Steps part # LC432690. So for a similar Torklift GlowStep setup that would match the threshold height you have now of 40 inches you'd be best off with the 5-step part # TLA9105 which has a entry height range of between 34-7/8" to 42-3/8".
    view full answer...

  • Which Lippert SolidStep 4-Step Kit Fits 29 inch Wide RV Door
  • The correct SolidStep 4-step for a 29 inch wide RV door is the part # LC791574. We also have the lift assist kit part # LC733937 which works with this SolidStep as well. This will make the step much easier to lift and lower.
    view full answer...

  • Comparing Price of TorkLift Glow Step Revolution with SafeStep
  • The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 25-1/2" Base - 375 lbs # TLA8104 is their part number A8104. I don't know where you are seeing their pricing but I couldn't find it online to compare. We get our pricing directly from them, so we are offering the best price we can. I wonder if the difference is in shipping or if they are not including the Landing Gear, but can't confirm. As far as the SafeStep Vinyl Barrier for TorkLift GlowStep Scissor Steps...
    view full answer...

  • Troubleshooting Kwikee Power Step of RV that Opens When Driving in Rain
  • The water is creating a short for the door switch of the Kwikee 32 Series Electric RV Steps # LC372261 which is basically telling the module that the door is open when it's not. Either there's exposed wire between the door switch circuit which the water is creating a short or the module is allowing water to seep in and create the short there. The step light switch wiring should be purple and black. You might check to see if there's any exposed wiring you could potentially seal up better....
    view full answer...

  • Replacement Gear and Parts for Original Lippert 3 Step on 2008 Forest River Georgetown 373
  • For the replacement gear you will use the Replacement Entry Step Gear for Lippert Kwikee 25 and 26 Series Triple Steps # LC369354. I believe the shear pin you are referring to is a part of the gear itself. The motor is # LC369506 which comes with the smaller gear. If you want to replace the entire assembly you can use the Lippert Components Kwikee Step Replacement Kit # LC379804.
    view full answer...

  • Dimensions of Safety Step Folding Platform Step With Legs Extended
  • I was able to get the measurements with the legs extended of the Safety Step Folding Platform Step # SASS-07C-S. With the legs out and extended, the overall measurements are 17-1/2" long x 14-1/4" wide x 7-1/8" tall. I have added a link below to a video review for you to check out as well of the Safety Step Folding Platform Step # SASS-07C-S.
    view full answer...

  • How Much Do the Brophy Steel 3-Step Camper Scissor Steps SS03 Weigh
  • The Brophy Camper Scissor Steps part # SS03 weigh around 25 lbs. If you are looking for the Brophy Camper Scissor Steps but made of aluminum instead of steel you can use part # AS03 which weighs around 15 lbs. We also have the Brophy Camper Scissor Steps part # AS23 which are also made of aluminum and weigh around 20 lbs.
    view full answer...

  • Which Lippert Manual Pull-Out Step Is Correct for a 32 Inch Entry Height
  • The Lippert Manual Pull-Out Step for RVs part # LC432690 which is a triple step option would be best for an entry height of 32". The distance from the top of the mounting bracket to the bottom of the step is 25" therefore you will only have 7" from the ground to the first step which is perfect. Please note, you do need to verify the mounting bracket width is 27-1/2" which is pretty standard.
    view full answer...

  • Dimensions of the Extendable Hitch Mounted Step Part # 288-08400
  • I have attached a few dimensions of the Extendable Hitch Mounted Step part # 288-08400 for you which you should then be able to use to determine compatible. As you can see, the vertical channel that extends above the shank only does so by 3/16" so I don't feel this will be an issue. However, you will want to pay special attention to the angled portion of the body in relation to the hitch pin hole. If the above will not work for you then we do have the HitchMate TruckStep Extendable part...
    view full answer...

  • Comparing Lippert 35 Series Electric RV Step Units
  • The four Lippert 35 Series RV electric step items are essentially the same product but they differ in some of the included components. In certain cases the original electronic control unit on the RV unit may still be functional and only the step and motor are needed. Part # LC3691462 includes the step, motor and switch kit. Part # LC369146 includes the step, motor and control unit. Part # LC3756271 includes the step, motor and switch kit. Part # LC3691461 includes the step, motor,...
    view full answer...

  • Replacement Kwikee Step Series 26 Motor and Gearbox for 1995 Flair RV
  • We have the Lippert Components Kwikee Step Gear/Linkage with C for 26 Series Kwikee Steps # LC379162. Then you will need the motor # LC379608. We also have the complete repair kit for your Kwikee Series 26 steps if you prefer updating the components all at once. The Lippert Components Kwikee Step Replacement Kit Link Assembly C and 9510CU # LC379801 contains an integrated motor, gear box, linkage kit C, and control unit. Basically the repair kit replaces everything except the frame.
    view full answer...

  • Will Lippert SolidStep on RV Cause Interference with Door Opening/Closing
  • When the SolidStep part # LC791573 is installed on your RV there would be slight reduction in clearance above the threshold like you can see in the picture I attached. If it's already tight there it would become tighter. You may have to adjust your door but in general this does not cause interference.
    view full answer...

  • Can You Add a Step to the TorkLift Glow Step Scissor Steps
  • Yes; there is a way to do this. In order to add a step to your TorkLift Glow Step # TLA7803 you can use the Single Add-On Step for TorkLift GlowStep Kits - 20" Long x 8" Deep # TLA7801. This adds a step in the middle and leaves the rest of the step in tact.
    view full answer...

  • Upgrading 2005 Winnebago Journey 36G Single Entry Step to Double Step
  • Yes, you can upgrade your Kwikee 28 Series single step to the Kwikee # 372261 two step electric RV step. However, double check your measuerments as the 28 has a mounting bracket width of 24-3/4" and the 32 series has a 25-1/2" mounting bracket width. Also, the bolt pattern does not match so you will need to drill a few holes. This will certainly make getting in and out of your coach easier! I have attached a link to this page and a dimensional drawing to help you.
    view full answer...

  • Recommended 4 Step Upgrade for 2018 Lance 825 Truck Camper
  • I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs # TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing gear help stabilize the steps on un-even ground and they'll work for entry heights between 31" and 42" tall. These aluminum steps are light weight and easy to move up and down, as well as remove during travel, so they're perfect for truck campers....
    view full answer...

  • Recommended Steps for Front of Boat Trailer
  • It sounds like you are trying to add some steps to the tongue of your boat trailer for help getting in the boat. If that is the case then only bolt-on option we'd have is the HitchMate Boat Trailer Step part # HE4036 which bolts onto the frame. The photo attached of the Hitch Stair with 2 Steps part # RHS2 is a custom installation in which the customer welded the shank to the frame but it is not designed for this purpose.
    view full answer...

  • Weight of TorkLift GlowStep Revolution Scissor Steps TLA8004
  • The TorkLift GlowStep Revolution Scissor Steps with Landing Gear # TLA8004 weighs 55 lbs. These particular steps fit an entry height of 32-1/2" to 44" and the steps themselves are 22" wide x 8" deep to ensure plenty of footing. They can even be locked with the Pin Lock for TorkLift GlowStep Scissor Steps # TLA7509 and if you'd like, for added stability when traversing the steps you can add a handrail, the TorkLift GlowGuide Handrail # TLA7621. I have added a link below to a video...
    view full answer...

  • Bolt Pattern and Mounting Plate Dimensions for Kwikee 40 Series Steps
  • In regards to the Kwikee 40 Series Electric RV Steps like part # LC3726891, the step mounting plate is 25-3/4" wide x 14-3/4" deep and the bolt pattern is 20.5" wide x 12-7/8" deep. I confirmed this with Lippert for you and have attached a photo below.
    view full answer...

  • Hand Rail For Lippert SolidStep Manual RV Steps
  • Yes, the Lippert Entry Assist Handrail for SolidStep Manual RV Steps part # LC799640 is the hand that you need for your SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791574. This hand rail fits third generation Triple or Quad SolidStep models. The Entry Assist Handrail can be easily removed or left in place when storing if clearance allows inside the trailer.
    view full answer...

  • Recommended SolidStep for a 2020 Mesa Ridge Limited 5th Wheel
  • The Lippert Components SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Quad - Aluminum part # LC791574 is going to be exactly what you need. It offers a sill range of anywhere from 35"-44" which matched your 2020 Mesa Ridge. When measuring the width for the solid steps they want you to measure the opening and round up to the next round number. With your door being 25" we can round up to 26" and it will work out perfectly for you. I've linked the item page and...
    view full answer...

  • Weight of LC726895 Victory Step Fold-Down RV Steps
  • Minus the shipping materials, the # LC726895 Victory Step Manual Fold-Down Steps weigh about 32 lbs. If you click the provided links, you can see a product installation video featuring the steps.
    view full answer...

  • Could TorkLift GlowStep Revolution Steps # TLA8004 Easily Install 2017 Forest River Windjammer
  • The TorkLift GlowStep Revolution Scissor Steps # TLA8004 that you referenced are designed to fit the standard RV step areas with the bracket kit part # TLA8022. There will most likely be some drilling though since these do install in a slightly different way that standard steps. The feet of the steps are adjustable in height pretty easily so if you somehow ended up on unlevel ground enough to call for it you could adjust the feet. In general most campsites are level enough for these...
    view full answer...

  • Replacement Kwikee Electric Steps for a 2005 Jayco Greyhawk 31SS
  • There are and were numerous 2-step Kwikee electric steps available. To ensure we get you the correct replacement I would need to know the series of the steps you have. Check the underside of your steps for any model numbers or other information. The current available models are the 32 Series # LC372261, 42 Series # LC372779, 40 Series # LC3726892, 34 Series # LC3722863, and Platinum Series # LC372558. Any information you can find on your steps will help narrow it down.
    view full answer...

  • Compatibility of TorkLift Glow Steps with Fox Landing Entry Platform for Truck Bed Camper
  • Given that the mount of the Torklift # TLA7844 is 2-1/2 inches wider than the available spot on the landing, these particular steps wouldn't be the best choice. CR Brophy makes a narrower 4 step unit, part # AS04 that would be a better choice. This set measures 17 inches wide and would fit your fox landing much better. According to Torklift, you could use the # TLA7844 on the rear edge of the fox landing, but the bracket would protrude past either edge by 1-1/4 inches and you'd need...
    view full answer...

  • Pull Out Step For 2016 Open Range Trailer With 40 Inch Entry Height
  • I do have an option for you but I contacted SolidStep and there is not a SolidStep model that fits a 24-1/2" door frame width with a 40 inch threshold height. Normally a threshold height over 36" would be a 26" door frame width. I recommend to use the TorkLift GlowStep Revolution Uprising Steps w/ Booster Step part # TLA9105 which fits 24" doorway width and entry heights 34-7/8" to 42-3/8". The TorkLift steps will stow in the trailer so they are protected from the elements. I have attached...
    view full answer...

  • Kwikee Series RV Step Replacement for 1988 Holiday Rambler 34
  • Do you have a Kwikee set on there currently that you need a replacement for? If so, if you could get me any part numbers off of the assembly that you can find I'd have an easier time determining what you'd need.
    view full answer...

  • Differences Between Brophy and Torklift GlowSteps Scissor Steps
  • The steps are very similar but there are some key differences. The Brophy step # AS25 is not meant for permanent installation on the camper; it is to be used while your vehicle is stationary removed prior to travel. The TorkLift # TLA7506 is intended to allow permanent installation using the included bracket. The Brophy Camper Scissor Steps # AS25 have 7-inches of rise between steps and an extended height of 40-48-inches. The TorkLift GlowStep Camper Scissor Steps # TLA7506 have 7-1/2-inches...
    view full answer...

  • Recommened Steps for Work Truck with Entry 52 Inches Off Ground
  • I have a solution for you, but there aren't going to be any steps that will have a capacity of greater than 325-lbs that you're going to be able to use for something 52" off the ground. I'll also add that the TorkLift GlowStep # TLA7834 you mentioned aren't going to be tall enough for your truck since it is designed for entry heights between 31" and 42". For something that tall off the ground you will need a 6 step setup like the TorkLift # TLA8006, which only has a 325-lbs capacity,...
    view full answer...

  • Picking Out Torklift 4 Step or 5 Step Glowstep Setup for 5th Wheel
  • The way to pick out the correct Torklift Glowstep is to go by the height from the threshold of the door down to the ground. Since you mentioned 3 feet the 4 step # TLA7844 is most likely what you need as it has a height range of between 31 and 42 inches. 3 feet is 36 inches. If you can get me an exact number though I can verify for sure what you'd want. The 5 step version part # TLA8005 has a height range of 39-1/2 to 52 inches.
    view full answer...

  • Recommended Steps for Truck Bed Slide-in Camper with Bolts on Bottom of Threshold
  • The bolts you show will work with the TorkLift GlowStep Camper Scissor Steps - 2 Steps - Aluminum - 20" Wide - 375 lbs # TLA7802. The attachment bracket will work for this application. If you want to replace the pins with locks, you can use Pin Lock for TorkLift GlowStep Scissor Steps # TLA7509 to deter theft. The Brophy Camper Scissor Steps # SS02 are similar, but the mounting bracket would require you to do a custom 90 degree plate like you referenced since it doesn't have the pin...
    view full answer...

  • Can Outriggers be Used to Install Flexco Manual Pull Out Steps # SMFP-2120
  • Yes, the outriggers # LC301704 can be used to install the Flexco Manual Pull Out Steps # SMFP-2120 on your Rockwood trailer.
    view full answer...

  • Replacement Kwikee Series 28 RV Steps for Winnebago
  • For a replacement Kwikee Series 28 power step we have the part # LC3747451 which will replace everything. If you were looking for a replacement control unit you'd need part # LC379146 or if you needed a replacement linkage part # LC379648.
    view full answer...

  • Replacement Parts for Electric Coach Step Model 168367 on Tiffin Motorhome
  • We currently do not carry the correct replacement for your Coach Step Model 168367. Instead, I recommend repairing the steps you have now as this will be much more cost effective and won't require any drilling. For this you can use the Replacement Motor part # LC301695 and or the Replacement Control Module part # LC301702.
    view full answer...

  • What Does Econo Porch Trailer Step # EHS-103-R-HR Weigh
  • The Econo Porch Trailer Step # EHS-103-R-HR that you referenced weighs 83 lbs. It has a weight capacity of 350 lbs. I attached a link to a review video for this for you to check out as well.
    view full answer...

  • Kwikee Magnet Switch for RV Step with 909506000 Module
  • The replacement door magnet switch kit for the auto retract/extend is the part # LC369299 as what you have requires a switch that is "normally open". This is an inexpensive solution that should fix your issue so I would start with it and see if it helps.
    view full answer...

  • Which Torklift Scissor GlowStep Fits Carriage Cameo 36SB3
  • Since your cut out height is 33 inches the correct Torklift Scissor GlowStep is the part # TLA8003 which has a height range of 25-1/2 inch to 36 inch. You do measure from the top of the cutout down to the ground. I attached a review video for this for you to check out as well.
    view full answer...

  • Should I Choose The 3 or 4 Step SolidStep For my Jayco Eagle with 29-1/4" Door Way
  • The SolidStep Manual Fold-Down Steps are a great choice for your Jayco 5th Wheel Camper. The amount of steps needed depends on your entry way height from the ground. The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791572 is designed for entry way heights of 27" - 36". While the 4 step SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames part # LC791574 is designed for entry way heights 35" - 44". If you measure from the ground to the bottom...
    view full answer...

  • Recommended Kwikee Electric RV Steps To Replace Lippert 128980 Steps On 2012 Coachmen Mirada
  • The Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide # LC372261 you mentioned are the correct steps to replace your current Lippert model 128980 steps on your 2012 Coachmen Mirada. The # LC372261 includes everything needed to complete the installation and function exactly like your current steps. I included a video of the # LC372261 for you to take a look at.
    view full answer...

  • Replacement for 181174 Coach Step on 2014 Tiffin Allegro Breeze
  • If you can let me know what parts you need to replace I can look into it, otherwise the only solution I know that will take care of your problem is to replace the entire step assembly with part # LC3756271 which is a Kwikee 36 Series single step.
    view full answer...

  • How Wide is the Lippert SolidStep LC698799 for 24" Wide Doors
  • The Lippert SolidStep # LC698799 is roughly 22" wide when measured from the outside of each step frame, so you will be able to make this fit inside your 23-1/2" wide door frame. I've linked a photo diagram of this measurement.
    view full answer...

  • Folded Up Height of SolidStep Manual Fold-Down Steps # LC733931
  • When the SolidStep Manual Fold-Down Steps # LC733931 are folded up in your door way the height of the setup will be 43-1/4 inches.
    view full answer...

  • Dimensions of 4-Step TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear
  • The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear # TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and landing feet (see attached photo).
    view full answer...

  • Recommended Steps To Help Get Inside Box Truck 50+ Inches Off the Ground
  • I have the perfect option for your truck, the TorkLift GlowStep Camper Scissor Steps part # TLA7836 which can extended to accommodate a threshold height of 58". This will actually be the tallest step we offer and it should be fairly easy to mount just below the door with the included mounting bracket.
    view full answer...

  • Which Lippert SolidStep Double Step Fits Jayco Motorhome with 25-1/2 inch Wide Doorway
  • The correct double Lippert SolidStep for your 25-1/2 inch width door opening is the part # LC733931. I've confirmed with them directly that this is the fit required
    view full answer...

  • Height Measurement from Top Step to Top of Mounting Bracket
  • The Lippert Electric Tread Lite Step for RVs # LC353543 has a top step that measures 4-1/2 inches from the top of the step to the top of the bracket frame. I confirmed this with my contact at Lippert/HappiJac who makes this step.
    view full answer...

  • Can RV Steps be Mounted to 2013 Mercedes-Benz Sprinter Van
  • Technically, you can install the Kwikee 32 Series Electric RV 2-Step # LC372261 on your 2013 Mercedes-Benz but they aren't designed to fit any certain vehicle and its not been done that I'm aware so I can't say for sure if this will fit. These steps do have a mounting plate dimension of 23-3/4" wide x 11-3/8" deep. I think you will be better off using stationary steps that are confirmed to fit your van, the Carr Custom-Fit Side Steps - Silver # CARR125774 or Black # CARR125771.
    view full answer...

  • Will Lippert LC733931 SolidStep Manual RV Step Work With 21 Inch Threshold Height
  • According to Lippert, as long as the legs of the # LC733931 SolidStep are fully retracted, the steps would work well for your threshold height. I've linked to a product demonstration video that you might find helpful.
    view full answer...

  • Will Screen Door Strut Interfere with Install of Lippert SolidStep
  • The screen door strut location on your threshold is most likely not going to interfere with the install of the Lippert SolidStep part # LC791575 but worst case scenario you could relocate the strut to the top of your door to avoid any interference.
    view full answer...

  • Installation of SolidStep with Threshold Depth Issue
  • Thanks for the photo of your SolidStep Manual Fold-Down Steps for 30" to 36" Wide RV Door Frames - Quad - Aluminum # LC791575 with the threshold. You can see in the attached videos if the threshold were larger you would simply attach to it and if smaller would fit right over it. With yours I recommend trimming that threshold just where the step hinge is for a flush fit. You can use a small cutting wheel on a rotary tool or drill to make it easy after tracing that edge. The aluminum...
    view full answer...

  • TLA8103 Fitment on my 2018 Forest River Salem Cruise Lite 263BHXL
  • Yes the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear part # TLA8103 will work out well for you. Your entry height is right at the minimum meaning you will have shorter steps which is what you are looking for. You are likely closer to the 28-30" range because they go from the bottom of the door rather than the top of the step bracket itself. . They are also quite easy to operate when compared to a standard steel step. I have linked a video for you on them to check out if...
    view full answer...

  • Kwikee 32 Series RV Step LC3722617 Replacement for Coach Step # 725-0042
  • The Kwikee 32 Series Double Step part # LC3722617 that you referenced is a replacement for the Coach step you have now. You will have to cut that wire that runs to the old module and splice it to the new module.
    view full answer...

  • Can the Kwikee 26 Series Electric RV 1-Step Be Obtained Without the Motor
  • The Kwikee 26 Series Electric RV 1-Step is offered with the motor, control unit, and switch as part # LC3711363; the motor and control unit as part # LC371136, and motor and switch as part # LC3711361 but these are the only configurations available.
    view full answer...

  • Where Does Lippert SolidStep RV Step Install Relative to Threshold of RV
  • I attached two pictures to this page that show how the SolidStep like the part # LC698799 install. Basically they bolt to the inside of the threshold in the interior of the RV and then when they fold down to be used they end up folding down on top of the threshold. For more info I attached a review video that covers more on these as well.
    view full answer...

  • What is Weight Difference Between Brophy Scissor Steps AS02 and SS02
  • The shipping weight difference is that the # SS02 weighs 20 lbs and the # AS02 weighs 12 lbs.
    view full answer...

  • Correct Replacement for Kwikee Series 23 Steps Model 902308000
  • I reached out to the manufacturer who told me the Kwikee Series 25 Steps # LC365837 you are looking to replace your older steps with will not work. This is what they told me: "Per my parts department, based on the information you have provided, they can verify that the customer is replacing a Series 23 Kwikee step assembly with a series 25 Kwikee step assembly. He needs to be advised not to do this, as they will not fit or bolt up properly. The frame sizes are different from one another...
    view full answer...

  • How Far Out Do Brophy Camper Scissor Steps # AS25 Stick When Installed at 45 inch Height
  • When you have the Brophy Camper Scissor Steps # AS25 installed at a 45 inch height they will stick out from the vehicle right at 46 inches. I attached a review video for these for you to check out as well.
    view full answer...

  • Availability of Fold Down RV Steps for 36 Inch Wide Door
  • We do indeed have some Lippert SolidStep fold down steps that will work with a 36 inch wide door frame. For a 2 step unit, use # LC733932 which works with a 22-28 inch entry height. For a 3 step unit, use # LC791573 for a 27-36 inch entry height or # LC791575 for a 4 step unit for 35-44 inch heights.
    view full answer...

  • Correct SolidSteps for 25 Inch Wide x 34 Inch High Entry Door on RV
  • Thanks so much for the photos they were super helpful, and based on those we do have the exact Lippert SolidSteps you need. Since your doorway width is just over 25 inches and entry height is just over 34 inches the correct SolidStep is the following: - SolidStep Manual Fold-Down Steps # LC791572 These steps will fit doors with your width and entry height, though the stabilizer you are referring to will likely need to be removed as it juts out too far. I have added links to the instructions...
    view full answer...

  • Can Lippert SolidStep Fit on RV with Low Height Threshold
  • Having a low threshold height would not be an issue with the Lipper SolidSteps like the part # LC698799 that you referenced. When this is folded up the door does not close on top of it at all. If you check out the picture I attached you'll see what the threshold looks like when the step is folded up. Basically the bracket rolls up and over the threshold which leaves the original threshold height unchanged when the door opens and closes.
    view full answer...

  • Which Torklift GlowStep Should be Used on 2018 Forest River Rockwood Roo 23IKSS
  • Your threshold height of 33-3/4 inches is perfect for the TorkLift GlowStep 3-Step part # TLA8003 which is designed tow work with the threshold height range of 25-1/2 inch to 36 inch.
    view full answer...

  • Best Replacement for Lippert Radius Quad Steps 432693
  • The best option we have to replace the Lippert Radius Quad Steps 432693 is with the Alumi-Tread Manual Pull-Out Step part # LC432698. I spoke with Lippert and they stated this is the only available replacement for the discontinued model. Please note, the Lippert Radius Quad Steps 432693 use an oddball 28" wide mounting bracket so you'd need to cut and reweld the outrigger in order to be able to mount anything else like the TorkLift GlowStep Revolution Scissor Steps part # TLA8004.
    view full answer...

  • Solid Legs Aren't Long Enough When Camping On Uneven Ground And Require Using Boards
  • To help alleviate having to find boards or using boards at all I recommend going with a 3 step set up like the SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Triple - Aluminum Item # LC791572. If I am correct your entry height is no higher than 28" from the ground. The triple step has a 27" - 36" door entry height. Your bottom step may be closer to the ground with the triple step when camping on a flat surface but these eliminate using boards when camping on an uneven...
    view full answer...

  • Does Motor, Control Unit, and Gearbox Come with Kwikee 32 Series Electric Step # LC372261
  • Yes, the Kwikee 32 Series Electric Step # LC372261 that you are referring to includes the motor, control unit, and switch kit giving you a complete step setup. Attached is a review video that highlights this as well.
    view full answer...

  • How to Determine Correct Lippert SolidStep Replacement for Trailer
  • I can help you find the correct Lippert SolidStep for your RV, and it will just take a few measurements. What you need to do is measure your doorway width and your entry height to ensure you get the right replacement SolidStep. For example, the SolidStep Manual Fold-Down Steps # LC791572 are for a doorway width between 26" and 29-7/8" and for an entry height of between 27" and 36". Or the SolidStep Manual Fold-Down Steps # LC791573 are for doorways between 30" and 36" wide...
    view full answer...

  • Can the Lippert Manual Pull-Out Step for RVs LC432690 Be Used To Replace 24" Wide Steps
  • In regards to selecting the correct set of pull-out steps for a trailer, the most important dimensions to verify are mounting bracket width and entry height. If these two metrics are correct then you need not worry about the step width although this is correlated to the mounting bracket width. The Lippert Manual Pull-Out Step for RVs part # LC432690 has a 27-1/2" wide mounting brackets with an entry height of 25" so if these both work for you then the step width of 25-1/2" won't matter.
    view full answer...

  • Recommended Direct Replacement for Kwikee 32 Series Steps on 1997 Southwind Storm 34
  • Yes. The Kwikee 32 Series Electric RV 2-Step - Motor, Control, Switch # LC372261 is a complete and direct replacement for your existing Series 32 steps. These steps have a 22" x 8-3/4" bolt mounting pattern and will work on your 1997 Southwind Storm 34.
    view full answer...

  • Can Trailer Door Be Closed When Lippert SolidStep Assembly Is Folded Down For Use
  • Yes, the Lippert SolidStep Fold-Down Steps like the Triple # LC791573 that you referenced will absolutely allow the trailer door to be closed when they're folded down for use. Like you mentioned in your question this will keep the inside safe from the elements while you're settled into your camping area and the steps are down for normal use. I have attached a customer-submitted image of their 4-Step model installed with the trailer door closed, just so you can get a good picture of...
    view full answer...

  • TorkLift GlowStep Revolution Steps for a 2019/2020 Grand Design Reflection 337 5th Wheel Camper
  • Yes, the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear # TLA8004 is what you'll want for a 2019/2020 Grand Design Reflection 337 5th wheel camper. I confirmed this with TorkLift and also attached a review video for you to check out.
    view full answer...

  • Troubleshooting RV Door Steps that Extend and Retract Backwards
  • It sounds like you have a couple wires run backwards on your Lippert powered steps. Its hard to say exactly which wires are wrong but most likely a power wire and ground is backwards. The best recommendation I can give would be for you to go over the wiring and verify everything is connected correctly. The green wire gets grounded to the chassis. The white wire gets connected to the power switch which then goes to the positive battery post. The yellow wire gets run to the a keyed power...
    view full answer...