bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Off Road Lights


  • Light Bar That Fits A 2022 Ford F-250
  • Yes, we have the Putco Luminix EDGE LED Curved Light Bar # P57VR that is confirmed to fit 2022 Ford F-250s with/without the optional factory fender flares. This light bar has a lumen output of 15,600, has a wattage output of 117 watts, and measures in at 40" long. These LEDs are comprised of premium Nichia LEDs, and features an integrated thermal regulator to prevent overheating.
    view full answer...

  • Measurements Of Light Mounting Holes On Carr Light Wing Off-Road Light Mounting System
  • I went to the warehouse and pulled one of the # CARR167301 and took some measurements for you. I have attached a photo with the measurements noted. As the photo shows, the mounting holes for the light are 1/2 inch diameter. The distance between the mounting holes is 28-1/2 inches and the overall length of the light mount is 36 inches.
    view full answer...

  • Recommended Light For Back Of Snowmobile Trailer To Help Backing Up In The Dark
  • While the Optronics LED RV Exterior Scene Light - Submersible - 1,200 Lumens # UCL41CB is pretty bright at 1200 lumens, it would not be the most ideal for lighting up behind your snowmobile trailer to back up in the dark. Instead I recommend going with the MaxxTow Off-Road Light Bar - LED - 72 Watts - Mixed Beam - 2 Row - 12" Long # MT80631 which has 5280 raw lumens and has both spot beam and flood beam lights to lighting up a long distance while still lighting up around you and would...
    view full answer...

  • Height and Depth of Pilot Automotive Off-Road Light Bar # PL-9704
  • The Pilot Automotive Off-Road Light Bar # PL-9704 that you referenced is 4-13/16 inches tall and 3-3/8 inches deep as well as 13-1/2 inches long.
    view full answer...

  • Can I Wire an Optronics LED Off-Road Light Bar to a 4 Way Connector?
  • You could connect the Optronics LED Off-Road Light Bar # UCL23CB to a 4 way connector like the 4-Pole Trailer End Connector # 18004 in order to allow you to receive power when it is plugged into the 4 way connector on your 2019 Jeep Cherokee, but there is no running light circuit on a 4 way connector so you'd likely need to use the tail light circuit in order to accomplish this. With that being said, this really isn't going to be the best way to accomplish this. You would be much better...
    view full answer...

  • Additional Driving Lights for 2020 Nissan Frontier With Factory Fog Lights Already
  • I have a solution for additional front lights on your Nissan. The Aries # AA1501262 Light Bar is a confirmed fit for your 2020 Nissan Frontier. While it is not exactly "plug and play" it will mount it your front grill and give you 9800 lumens of addtional lighting - and a customized look. This kit includes all the hardware that you will need for a sturdy installation. I have included an instructional video for your review.
    view full answer...

  • Will Vision X Fog Lights Fit 2017 Ram 1500 Truck
  • The Vision X Optimus Single Prime LED Fog Light Upgrade Kit, part # XIL-OE0913 will work great on your 2017 Ram. These LED lights measure 3-inches wide x 3-3/16 inches tall x 3-13/16 inches deep and have a total effective lumen output of 2,944. These lights come with custom mounting brackets made of 304 stainless steel.
    view full answer...

  • Recommended LED Light Bar For Side Of Horse Trailer
  • We have several lights that could work for the side of your horse trailer. I recommend LED lights because they draw about 1/10 of the current as incandescent lights and stay cooler too. One light I recommend is the Pilot Automotive Light Bar, part # PL-9704. This light is 13-1/2 inches long and has a combined lighting of a 90-degree flood light combined with an 8-degree spot light. This light has 24 LEDs and features universal mounting feet. The mounting hardware is also included. I...
    view full answer...

  • Adding LED Pod Lights to Trailer Rack
  • Adding LED pod lights to your trailer's rack system will require an auxiliary power source such as a 12 volt battery that you will need to mount on your trailer and wire the lights to. The Vision X Optimus Round Prime Pod Light Kit # XIL-OPR120KIT which has a wide spot beam or the Vision X Optimus Round Prime Pod Light Kit # XIL-OPR110KIT which has a narrow spot beam has the wiring and switch included in the kit. If you take a look at the accompanying photo you can see how these lights...
    view full answer...

  • Light Bar For Enclosed Trailer To Work Outside of Trailer At Night
  • The MaxxTow Off-Road Light Bar part # MT80636 can be used in your enclosed trailer if you wire the light bar to a 12V battery. It is typically used as an off-road light bar but works for your application. It is a combination flood beam and spot beam for seeing at a distance. I have attached a photo of our installers testing the light in the parking lot. I recommend Go Power Smart Battery Converter Charger part # 34266169. The Go Power Converter is a 55 Amp Converter. When choosing...
    view full answer...

  • Where Are The MaxxTow Off-Road Lights Made
  • MaxxTow Off-Road Lights part # MT70882 are made in China. Even so we have received good reviews on the lights regarding their quality and brightness. I have attached a photo and video for your reference. The only option that we carry that may work for you that are made in the USA are the Peterson flood lights. The Peterson Great White LED Work Light part # 910-MV measures 3-7/16" wide x 3-1/2" tall but is a bright white light compared to the soft beam of the MaxxTow. There is also...
    view full answer...

  • License Plate Bracket To Mount On RV Rear Ladder
  • I do have an option for you but there is not a good option for a license plate mount that will hook over one of the rungs of your ladder. The only way to attach the a license plate to the ladder, is a bracket like part # A90416 and to use metal or plastic zip ties through the mounting holes to keep it secured to the ladder.
    view full answer...

  • Does the Westin Cowl Mount Bracket Kit for LED Light Bar Block Washer Fluid?
  • No the Westin Cowl Mount Bracket Kit for LED Light Bar - Aluminum - Black part # 62-41075 will not interfere with the operation of your washer fluid nozzles. It has a design that puts it just in front of them allowing the fluid to reach all areas of the windshield without issues. I've included a picture to better show the positioning.
    view full answer...

  • What is the Voltage Range for the Optronics LED Off-Road Mini Light Kit LS204RW
  • I reached out to my contact at Optronics who said that the Optronics LED Off-Road Mini Light Kit # LS204RW is designed to be used with a 12V system. He said it could handle some spikes of 13V or possibly 14V but only for short periods of time.
    view full answer...

  • Does the Optronics LED Light Bar Illuminate the Spot and Flood Lights Separately or Combined
  • No, the Optronics # UCL25CB has only 1 set of wires so the flood and spot beams are designed to work at the same time. We currently do not carry a light bar that allows you to switch between a spot and flood light. You also may want to check out the MaxxTow Off-Road Light Bar - LED - 300 Watts - Mixed Beam - 2 Row - 54-1/2" Long # MT80636, which might fit as well, but I really like that it includes the switch and wiring harness.
    view full answer...

  • Light Output of Optronics LED Off-Road Mini Light kit part # LS204RW
  • I checked with Optronics and while they don't have a Lumens output for the Optronics LED Off-Road Mini Light kit part # LS204RW they do have a Candela rating for it which is 320. The switch is not waterproof either.
    view full answer...

  • What Light Bars Will Work with the LED Light Mounting Brackets for Rhino-Rack Crossbars
  • I do have an option for you but the Buyers Products Light Bar part # 3371492184 uses a special type of mounting bracket that won't work with the LED Light Mounting Brackets for Rhino-Rack Vortex Aero and Heavy-Duty Crossbars part # RR43174 because there are no mounting holes on each end. Instead, I recommend using the MaxxTow Off-Road Light Bar part # MT80633 which has twice as many diodes and uses side mounting holes so it will work with the LED Light Mounting Brackets for Rhino-Rack Vortex...
    view full answer...

  • Recommendation on Lights For Westin Ultimate Bull Bar
  • The off-road lights that I have available for the Westin Ultimate Bull Bar are as follows: Westin 6 Inch Off-Road Driving Lights, Chrome, part # 09-05001 Westin 6 inch Off-Road Driving Lights, Black Powder Coat - 1 light - part # 09-05051
    view full answer...

  • Will Carr Deluxe Light Bar Fit on 2009 Jeep Commander and Is Drilling Required
  • The Carr Deluxe Light Bar # CARR210341 is a custom fit for your 2009 Jeep Commander and will provide an attachment point for 4 off-road lights. I have provided a link to the instructions for the proper installation of this product. You will also need the Carr Gutterless Mount Kit # CARR220052 to install your light bar. It is designed for applications without external rain gutters. You will be required to drill 4 1/8 inch holes per bracket. I have included a link providing installation...
    view full answer...

  • Does Optronics LED Off-Road Light Bar Have Specific Range
  • While there is not a specific range that is specific to the Optronics LED Off-Road Light Bar # UCL22CB I can give you some comparisons that may help. If you take a look at the accompanying photo you can see a test we did with the MaxxTow Off-Road Light Bar # MT80633 (which also fits your 2012 Ram 1500) that shows the lights at approximately 100 feet. I offered this comparison because the MaxxTow and Optronics light bars are very similar mixed beam off-road lights. The MaxxTow # MT80633...
    view full answer...

  • Are the MaxxTow Off-Road Lights Spot or Flood Lights
  • The MaxxTow Off-Road Lights part # MT80637-2 have a 30-degree projection which would classify them as a spot light whereas flood lights usually have a projection between 45-degrees and 60 degrees. If you want to get a better view of the projection while in use you can take a look at the attached review video which shows this @ 3:20.
    view full answer...

  • Can Lens Be Removed From Optronics LED Off-Road Mini Light Kit - Waterproof
  • Since the Optronics LED Off-Road Mini Light Kit part # LS204RW is considered water proof the lens is sealed and cannot be removed.
    view full answer...

  • Where Should You Install the MaxxTow Off-Road Light Bar on a 2016 Ram 1500
  • The MaxxTow Off-Road Light Bar, part # MT80633, can be mounted anywhere you see fit on your 2016 Ram 1500. That can be on top of the front bumper, behind the grill, or even on the roof. To give you an idea of your different options, I've linked to a video review of this light bar that shows the different setups. We don't have specific pictures of this mounted on a 2016 Ram 1500, but I suggest mounting it the same way as we have on a 2018 Ford F-250. I've linked to that video as well,...
    view full answer...

  • How to Install a Light Bar on a 2018 GMC Sierra 1500
  • When installing a light bar like the MaxxTow Off-Road Light Bar part # MT80635 on your 2018 GMC Sierra 1500 you will need to hook it up directly to the battery due to the amount of power it draws. The trailer lighting circuits on your truck would not be nearly strong enough to power the light bar. The good news is however that this light bar comes with an on/off switch so it will not be powered all the time, just when you choose to do so. There may be a way to draw power from the battery...
    view full answer...

  • Distance Between Light Mounting Holes on the Wings of the Carr Light Wing Off-Road Light
  • I went to the warehouse and pulled one of the # CARR167303 and took some measurements for you. I have attached a photo with the measurements noted. As the photo shows, the mounting holes for the light are 1/2 inch diameter. The distance between the mounting holes is 28-1/2 inches and the overall length of the light mount is 36 inches. This product is designed to bolt to a solid mounting surface on the bumper of a vehicle. You will need to drill to install this. I attached install instructions...
    view full answer...

  • Is Optronics LED Off-Road Light Bar Submersible
  • The Optronics LED Off-Road Light Bar # UCL21CB is not submersible and cannot be used underwater. The light bar is IP65 rated, which means it is totally dust tight and also protected against "low pressure jets of directed water at any angle." So while the light bar is not great for submarine use, it is going to be completely safe to use in the elements on a car, truck or SUV. I have added a link to a video review which I recommend checking out as well.
    view full answer...

  • Will Putco Luminix LED Bulbs Be Warm Enough to Melt Snow
  • You ask a really interesting question. Its absolutely correct that LED lights will generate much less heat than typical halogen headlamp bulbs, due to their better efficiency. In even really cold Midwest winter weather a halogen lamp will usually keep the outside of a car's headlight lens slightly warm to the touch. This will be enough heat to discourage buildup of snow/slush/ice on the lens. On my car with halogen bulbs even if I start my morning drive with ice on the headlamps (that...
    view full answer...

  • Off-Road Lights for Use on Thule Roof Cargo Basket TH859XT
  • The Thule cargo basket # TH859XT does indeed have a curved front top tube that is the mounting point for it's included wind fairing. The round and curved surface and the presence of the fairing make this a less-than-ideal mounting point for the Pilot Automotive LED Light Bar # PL-9704. It's hardware is made for a flat mounting surface. Yes, you COULD mount it there with a bit of effort (making sure you drill all the way through both sides of the tubing). Note this will void the basket's...
    view full answer...

  • Recommended Switch for Off Road Light Bar # UCL22CB?
  • The Optronics LED Off-Road Light Bar # UCL22CB comes with just basic wiring. The wire is 16 inches long and 16 gauge. The video simply shows us using alligator clips to a power source, but I recommend you use a switch like # EJ-3520-LSW or # PK34513.
    view full answer...

  • LED Light Bar for Gooseneck Flatbed Trailer
  • There may be a solution for you with the Putco High Power Luminix Off-Road Light Bar # P10010, which is a 10" long light bar with a narrow 15-degree spot beam. It does mount to flat surfaces, has a wiring harness which allows it to connect to a 12V battery and has an on/off switch. A remote control # P8770F is also available which has a 30 yard range. I've added links to video reviews for you to take a look at on this light bar as well.
    view full answer...

  • Mounting Bracket Width of MaxxTow MT80637-2 Off Road Lamp
  • The existing base bracketry on your Peterson # 507-12 is 1-7/8 inch wide, while that of the MaxxTow # MT80637-2 is 1-1/8 inches. Since the old bracket is wider, you can reuse it, you'll just need to devise a way to shim out the base of the new lamp, such as using some stacked washers to take up the space differential. I've provided a photo showing the dimensions side by side. The photos aren't quite to scale, so it appears that the bracket of the MaxxTow lamp is wider than the Peterson,...
    view full answer...

  • Amount of Power Drawn By Optronics Platinum Burners Off-Road LED Lamps
  • The Optronics # LS204RW Platinum Burners lamps draw about .3 amps while the # LS16A2WS (which we don't offer) draws about .5. A motorcycle battery would be a good balance between available power and reduced size and weight, and would provide the amount of power you'd need. If you don't already have one, you'll need a charger like # 329-GENIUS5 to keep the battery charged when not in use.
    view full answer...

  • How Does MaxxTow Off-Road Light Bar Mount and Will it Fit on Ford F-250
  • The mounting holes of the MaxxTow Off-Road Light Bar # MT80636 are spaced 53-13/16 inches apart. As long as the mounting location you're using is wide enough it will work for you. It is generally mounted using a light bar mounting bracket which is connected to the roof of the vehicle. I attached a video of a Jeep with this setup. For a light bar that is designed to fit on your 2003 Ford F-250 you should look at the Carr C-Profile Rota Light Mounting Bar # CARR210111 with the Gutterless...
    view full answer...

  • Off-Road Lights that Will Fit a 1985 Ford Bronco II
  • I do have roof mounted off road lights that will work on your 1985 Ford Bronco II, however, we have not had a chance to confirm the fitment of the Carr Deluxe Light Mounting Bar part # CARR210341 on your vehicle yet. For an off-road light bar that will work on the roof of your vehicle, I recommend using the MaxxTow Off-Road Light Bar part # MT80634. This light bar comes with everything need for installation in addition to producing up to 17,600 lumens with a lifespan of 30,000 hours....
    view full answer...

  • Recommended LED Light Bar Mounting Kit for 2013 Nissan Frontier
  • I have a couple options for mounting your LED light bar but Westin doesn't have a fit for the off road mounting bar you were looking at for your 2013 Nissan Frontier. We do have number of Carr Light Mounting Bars like the # CARR210341 which uses the gutterless mounting kit # CARR220051 to mount to your vehicle. See the attached link of all the styles that are offered from Carr. Another option would be to get a license plate mounted LED bar like the Vision X # LICENSEPLPX910. This...
    view full answer...

  • Wire Gauge Recommendation for Installing MaxxTow Off-Road Lights # MT70882
  • I would go with 14 gauge wire honestly. The part # MT70882 is LED which means it doesn't draw much, but it still draws enough that you would want a heavier gauge wire than 14 or 16 at the length you mentioned of 16 inches since that adds resistance.
    view full answer...

  • Idea for Attaching Light Bar to Roof Cargo Basket
  • I am sure there is a way you could mount the Vision X Xmitter Prime IRIS Off-Road Light Bar # XPI-12M to the Yakima Load Warrior part # Y07070 if you wanted to, but aside from modifying light bar brackets like part # 57-0000 there really isn't a way that I can recommend.
    view full answer...

  • Dimensions Of the MaxxTow Off-Road Lights # MT70882
  • I went and pulled a MaxxTow Off-Road Lights # MT70882 from our warehouse to get the dimensions you requested. The lights are 3-3/4 inches wide and 3 inches tall and the mounting stud is 1/4 inch in diameter.
    view full answer...

  • Can Spot Beam and Flood Beam be Used Separately On Optronics LED Light Bar # UCL20CB
  • The Optronics LED Off-Road Light Bar # UCL20CB referenced in your question does feature a combination spot beam and flood beam but the two beam styles cannot be operated separately. The mixed beam will allow you to see clearly at a distance as well as off to both sides at the same time. It has a standard 2-wire design (white for ground and black for power), is compatible with 12V DC and 24V DC systems, and comes with the needed mounting hardware. I have attached a short video demonstration...
    view full answer...

  • Amperage Draw of MaxxTow Off-Road Light # MT80637
  • The wattage of the MaxxTow Off-Road Light # MT80637 is 27 that means this draws 2.25 amps per hour. Depending the amp hour rating of your battery will dictate how long that would last.
    view full answer...

  • Technical Information for MaxxTow Off-Road LED Light Bar - 120 Watts - Mixed Beam - 2 Row MT80632
  • MaxxTow Off-Road Light Bar - LED - 120 Watts - Mixed Beam - 2 Row - 21-1/2" Long Item # MT80632 is meant to work in on/off applications and is not designed or tested for use with dimmers. I can't say how it would perform with a dimmer. The light does have cooling fins on the back and while they could dissipate heat faster with airflow over them it is not a requirement. You can wire several of these lights to the same power source but like you said the combined draw of the lights...
    view full answer...

  • Does the Optronics LED Off-Road Light Bar Need a Relay
  • In regards to the Optronics LED Off-Road Light Bar part # UCL21CB, you can choose to install the light bar with just a standard toggle switch or with a relay and standard toggle switch. The inclusion of a relay allows a low-current circuit (battery) to better control the electricity flow of a high-current circuit (light bar). The Optronics LED Off-Road Light Bar only draws 4 amps at full power so a relay is not really required, you would just need a switch with circuit protection rated...
    view full answer...

  • Can the Carr Light Wing Off-Road Light Mounting System # CARR167304 Be Left On In Car Wash
  • The Carr Light Wing Off-Road Light Mounting System # CARR167304 is a sturdily built mounting bracket that would work just fine if you drove through a car wash with brushes. It would be more likely that the lights would have an issue, but if they are off-road type lights they would be made for rougher conditions and should be totally fine as well.
    view full answer...

  • Recommendation for a Light Bar Mount on a 1991 Ford Ranger With Gutters
  • Good news, the Carr C-Profile Rota Light Bar # CARR210111 is a fit for your 1991 Ford Ranger. I have linked the instructions you have requested for the C-Profile Rota Light Bar. This Light bar mount will hold up to a 50 inch light bar which are all sold separately like the part # P10050 or # XIL-LPX3910.
    view full answer...

  • Off-Road Lights With 10 Foot Harness for 2016 Chevy Silverado 1500
  • I do have an solution for you to use off-road lights on your 2016 Chevy Silverado 500, however when I contacted Aries they were unable to tell me the length of the harness that comes with the Aries LED Work Lights # AA1501250 and there are none currently available to me that I would be able to go and measure. There are a pair of outstanding alternatives, the Vision X Optimus Single Prime Pod Light Kit # XIL-OP110KIT which have a narrow 10-degree spot beam, or the Vision X Optimus Single...
    view full answer...

  • Does MaxxTow Off-Road Light Bar Have Vehicle-Specifc Mounting Brackets and Hardware
  • The MaxxTow Off-Road Light Bar # MT80636 has universal mounting brackets and hardware to install to your 1999 Dodge Durango. You can mount it in any way you like, with the entire unit, including the brackets, measuring 53-5/16 inches from end to end. I have added a link to a video review as well as an install of this light bar for you to take a look at.
    view full answer...

  • Does Carr Deluxe Light Mounting Bar Come In Black For Jeep Cherokee
  • Yes the Carr Deluxe Light Mounting Bar part # CARR210344 does come in black powder coated steel with part # CARR210341. Please keep in mind the bars do not come with the lights attached. You would need to purchase Westin Off-Road Driving Lights - 6" Diameter - Black Powder Coat part 09-05051 to add to the bar which are 55-watt bulbs.
    view full answer...

  • Will MaxxTow Off-Road Lights MT80637-2 be Brighter at 30 Volts than 10 Volts
  • They may be a little brighter at 30 volts than at 10 but what really matters is the amperage since lights # MT80637-2 will be drawing the same amount despite what the voltage is. And since LED lights require such little power to begin with to operate at full capacity you may not even be able to tell the difference in voltage.
    view full answer...

  • Correct Mounting Kit for Carr Low-Profile Light Mounting Bar CARR210501 Installation
  • The Carr Gutterless Mount Kit # CARR220541 is the correct fit for your 2006 Chevy Silverado 1500 to allow installation of their Low-Profile Light Mounting Bar # CARR210501. The mounting kit includes hardware and does require some drilling for installation. The Low-Profile bar does not include lights so you'll want to consider a couple of the lights like the # 09-05051 from Westin which is a 6-inch off-road lights that have 55-watt quartz halogen bulbs. All off-road lights are linked for you.
    view full answer...

  • How Sturdy Is The Mount On The Westin Off-Road Driving Lights?
  • The mount on the Westin Off-Road Driving Lights - 6" Diameter - Black Powder Coat - 1light, # 09-05051 itself is very sturdy. It is intended/designed for off-road driving conditions where the idea is durability. These lights can mount well on a snow plow as well and are often used for that application. The housing is powder coated for durability to protect the metal from the elements. I've attached some videos for you to reference. You may also be interested in a mount like # 57-0005...
    view full answer...

  • Wiring and Switch Recommendations for MaxxTow Off-Road Lights # MT70882
  • MaxxTow Off-Road Lights # MT70882 do not come with a switch or wiring because of its universal design. The lights have 2 wires. The red wire is the power wire and the black wire is the ground. For wire you can use # DW02359-1. It is sold by the foot so you will need to keep that in mind when ordering. For butt connectors I recommend part # DW05744-10. For a switch you can use a toggle switch such as # PK34513 or part # PK34310.
    view full answer...

  • Mounting Kit Needed to Install Carr M-Profile Light Mounting Bar # CARR210704 on 2006 Frontier
  • Yes, to install the Carr M-Profile Light Mounting Bar # CARR210704 on your 2006 Nissan Frontier you will need to add the Gutterless Mount Kit # CARR220062. This bracket kit is designed specifically for your Frontier and will attach to the truck's interior door jambs so that you can properly mount the Light Mounting Bar. This mounting bar will work perfectly with lights like the Westin # 09-05051. I have attached the installation manual below that you can also look through.
    view full answer...

  • Can Maxxtow Off-Load Light Bar be Connected to Factory Fog Lamp Wires on Chevy Silverado
  • You might be able to wire the MaxxTow Off-Load Light Bar # MT80630 to the existing fog light circuit wires under the bumper of your Silverado but I can't really recommend doing this. This is simply because the factory wires are designed to handle only a certain bulb voltage and it's possible the MaxxTow Light Bar will exceed it and cause damage to the factory wiring and the truck. With this in mind I highly recommend wiring the light to the 12V battery on your Silverado and using the...
    view full answer...

  • Which Gutterless Kit do I Need to Install Mounting Bar # CARR210344 on a 2002 Dodge Ram 2500
  • The gutterless mount kit that you need to install the Carr Deluxe Light Mounting Bar # CARR210344 on your 2002 Dodge Ram 2500 is listed on our site as part # CARR221501. This kit is made of steel that has a black powder coat finish to help it resist rust and corrosion. Please note that this mounting bar does NOT include the lights. If you do not already have lights then I recommend going with one of the Westin Off-Road Driving Lights # 09-05001 or # 09-05051, which both have a 6" diameter. These...
    view full answer...

  • Availability of Light Mounting/Licence Plate Relocation Kit for 2015 Ford F-150
  • Carr offers a license plate relocation/light mount kit # CARR167301 in black and # CARR167303 in chrome that mounts to your bumper. These can hold 2 lights that use 3/8" diameter mounting bolts and installation requires drilling. They also offer a roof mounting kit for light bars, parts # CARR210114 and # CARR220062. The Putco High Power Luminix Off-Road Light Bar with License Plate Mount # P2281L is intended for use on the 2007-2017 Jeep Wrangler and Wrangler Unlimited. We do offer...
    view full answer...

  • Recommended Off-Road LED Light Bar for 2002 Toyota Sequoia
  • We do carry off-road LED light bars that are a fit for your 2002 Toyota Sequoia; I recommend the MaxxTow Off-Road Light Bar # MT80636. This light bar has a mixed flood beam and spot beam so you can see at a wide angle and at a distance. It has two rows of 3-watt LEDs that have a 30,000 hour life span and comes with the mounting hardware and wiring harness necessary for installation. I've added links to video reviews of this bar for you to take a look at as well.
    view full answer...

  • Finding Compatible Wiring Harness For The Buyer Products Curved Off-Road LED Light Bar, # 3371492171
  • The Wiring Harness for Buyers Products LED Light Bar - Single Switch - DT Connection, part # 3373035768, is the correct wiring harness for the Curved Off-Road LED Light Bar - 6,480 Lumens - Mixed Beam - Double Row - 14" Long, part # 3371492171, you attached to your question. I have included a product description link and video demo links below.
    view full answer...

  • Can Vehicle Off-Road Lights be Mounted on a Kayak and Connected to 12 Volt Battery
  • It is possible to install driving lights, like part # 09-0105, on a kayak with a 12-volt battery to power them. The hardware and wiring is included with the lights.
    view full answer...

  • Can 2 MaxxTow LED Light Bars be Ran Off of the Same Wiring Harness and Switch
  • Even though the LED lights in MaxxTow Off-Road Light Bar - LED - 36 Watts - Mixed Beam - 2 Row - 7-5/16" Long Item # MT80630 draw very little amperage the wiring that is included was designed for just one light. But you could tap into one switch for both lights if you wanted to.
    view full answer...

  • How to Install Optronics Halogen Fog Light Kit # QH-84CF
  • I went out to the warehouse and pulled a Fog Light Kit, # QH-84CF. After mounting the lights with the included brackets and hardware, disconnect the battery. Next, attach the included black ground wire extensions to each lights black ground wire. They will then get connected to the vehicle frame. Next, you will connect the white power wires on each light to the white power extension wires. Each of these will get connected to a longer white Y-extension. Next mount the included...
    view full answer...

  • Availability of Black Version of Carr Deluxe Rota Light Bar
  • Yes, we do have a black version of the CARR light bar part # CARR210872 that you referenced as part number CARR210871.
    view full answer...

  • Comparing LED Light Bar for 2013 Ford F-150 Between Pilot and MaxxTow 21-1/2 Inch Options
  • The Pilot Automotive Off-Road Light Bar # PL-9705 has two beams. One with a 90-Degree flood beam that is great for seeing out in front of you as well as off to both sides and the other has a narrow 8-degree spot beam that is great for seeing at a distance. So it has both broad and focused options. The MaxxTow Off-Road Light Bar # MT80632 is very similar with the biggest difference being the hour lifespan of the LEDs. The Pilot mode has LEDs with 50,000 hour life and the MaxxTow has...
    view full answer...

  • What Gauge Wire To Power the MaxxTow Off-Road Light Bar # MT80636?
  • I reached out to my contact at MaxxTow and the MaxxTow Off-Road Light Bar - LED - 300 Watts - Mixed Beam - 2 Row - 54-1/2" Long # MT80636 has 14 gauge wire that runs the power from the LED Bar to the relay and from the relay to the battery. I've attached a video to assist with this wiring connection.
    view full answer...

  • How to Wire the Optronics Driving Light Kit # QH-85CD
  • The Optronics Driving Light Kit, # QH-85CD, will come with a total of 7 wires, the lights and a switch. Of the 7 wires, you will have 3 black ground wires, 2 white extension wires, 1 white main power wire and 1 red power supply wire. Each light will have 2 wires, 1 for ground and 1 for power. The ground wire from each light will be connected to a black ground wire to a clean, bare metal surface using a provided sheet metal screw and the white extension wire will attach to the white...
    view full answer...

  • Light Kit That Can be Used on 2015 Nissan Frontier with Westin Bull Bar
  • If your 2015 Nissan Frontier with a Westin Ultimate Bull Bar part # 32-1695 installed, you will need lights with a diameter of 5-3/4" or less. The Westin driving lights that we carry, part # 09-05051, will not work because they are a 6-inch diameter driving light. There are several others that you could use like the MaxxTow Off-Road Light - LED - 27 Watts - Wide Spot Beam - 4-1/2" Diameter - Qty 1 Item # MT80637.
    view full answer...

  • How Wide is the Optronics LED Off-Road Light Bar without the Mounting Brackets?
  • The width of the Optronics LED Off-Road Light Bar - 6,777 Lumens part # UCL22CB is 30 7/8" wide without the mounting bracket s attached.
    view full answer...

  • Can MaxxTow Off-Road Light Bar Be Mounted On Rear Bumper To Help When Backing Up
  • The MaxxTow Off-Road Light Bar # MT80630 is designed for off-road use. The light bar does come with the wiring and a switch. Since it is intended to be used for seeing what is ahead I recommend checking with the authorities to see if there is any reason you cannot use it as a back up light as you want.
    view full answer...

  • Can Light Bar Be Mounted On Westin MAX Bull Bar with Winch Mounting Tray for a 2012 Ram 3500
  • The correct Westin MAX Bull Bar with Winch Mounting Tray for a 2012 Ram 3500 is part # 46-43555-23555. The top tube of this bull bar has pre-drilled holes which will accept stud mounted lights like the Westin Driving Lights part # 09-05051. If you wanted to use the MaxxTow Off-Road Light Bar part # MT80633 you'd need to drill new mounted holes.
    view full answer...

  • Installing Off Road Light Bar On 2017 Honda Rancher ATV
  • The Optronics LED Off-Road Light Bar # UCL20CB will work with your 2017 Honda Rancher. The 12V will power it sufficiently and it will draw 9.8 amps. The mounting holes will be 23-3/4 inch on center. I recommend connecting it to your battery with an inline switch. Connect # 16-1-1 wire to the positive battery terminal and then use Pollak Light-Duty Toggle Switch - On-Off - 12 Volt - 10 Amp - 6" Wire Leads # PK34513 on the power wire using # DW05744-5.
    view full answer...

  • Will a 40 Inch LED Light Bar Mount on the Carr XRS Rota Light Bar on a 2011 Jeep Wrangler
  • You should be able to mount a 40 inch LED light bar on the Carr XRS Rota Light Bar, # CARR210221. The crossbar for this light bar is 53 inches long which should leave plenty of room for a 40 inch LED light. The top of the light bar has 1/2 inch elongated bolt holes giving you several options for mounting your LED light. I have attached the installation instructions for you to check out. The bumper mount light bars that we carry for your Wrangler mount at the license plate holder. Check...
    view full answer...

  • Will the MaxxTow Off-Road Lights # MT70882 Work with a 36V Golf Cart
  • We do have some light options that are compatible with your 36V golf cart but unfortunately the MaxxTow Off-Road Lights # MT70882 are only compatible with 9V - 32V systems. Instead I recommend going with the Vision X Duralux Spot Light # DURA-410 or the Vision X Duralux Floodlight # DURA-660 which are both compatible with 11V - 65V DC systems.
    view full answer...

  • Switch and Wiring Recommendation for Use with MaxxTow Off-Road Lights # MT70882
  • MaxxTow Off-Road Lights # MT70882 do not come with a switch or wiring because of its universal design. The lights have 2 wires. The red wire is the power wire and the black wire is the ground. For wire you can use # DW02359-1. It is sold by the foot so you will need to keep that in mind when ordering. For butt connectors I recommend part # DW05744-10. For a switch you can use a toggle switch such as # PK34513 or part # PK34310.
    view full answer...

  • Is the Optronics LED Off-Road Light Bar Bright Enough to Use on my Tractor to Plow Snow
  • Yes the Optronics LED Off-Road Light Bar part# UCL22CB is a very bright and effective light. There would be no issues being able to see what you were doing. Check out the attached video for an idea of just how bright it is.
    view full answer...

  • Running Wires Thru Firewall to Install Optronics Light Kit XIL-OEA0713JKCP on 2013 Nissan Frontier
  • The best-case scenario would be if you could find an existing grommet that passes through the firewall. There will be one somewhere on the firewall that allows the main wiring harness to pass from the engine compartment to the passenger cab. When you find an existing grommet, use a small knife to cut or poke a small slit in the rubber, being careful not to nick any wiring running nearby. If you cannot find a grommet on the firewall, look under the truck, on the floor pan. If you find a...
    view full answer...

  • Will 12V LED Lights Work with 6V System
  • Using LED lights like # MT80637-2 on a 6 Volt system may result in much dimmer LEDs but it is also possible that the LEDs will not produce any light at all. You will also dramatically shorten the lifespan of the LEDs and then there's also the potential damage caused by overheated wires from excessive amperage draw - all reasons why we do not recommend using a 12V LED light on a 6V system. Since we do not offer any 6V lights, you could technically use a 12V breakaway battery like # 3801250...
    view full answer...

  • License Plate Light Bar and Light Bar Recommendation for Adding Increased Night Time Visibility
  • The # XIL-LICENSEP that you referenced doesn't have a specific weight capacity but it can be used with light bars that are up to 20 inches in length. For a light bar to use with this bracket the part # XIL-LPX910 would be a great choice. This light bar is 12 inches long and has an output of 3,300 Lumens. It also only weighs 3 lbs so it wouldn't hardly weigh anything either.
    view full answer...

  • How to Install the MaxxTow Off-Road Light Bar Part # MT80632
  • I can certainly walk you through the instruction but we do not have an install video of the MaxxTow Off-Road Light Bar part # MT80632 at this time. 1) Position the light bar in the desired location on the vehicle and secure with the included hardware. There is a rubber base included with the kit that will need to be placed under the mounting surface. You may or may not need to drill holes for the mounting feet depending on your application. 2) Remove the positive battery terminal...
    view full answer...

  • Does Aries Pro Series Grille Guard Fit 2018 GMC Canyon Terrain & Best Lightbar Fit
  • Excellent questions, so I checked with the manufacturer, Aries Automotive, and your 2018 GMC Canyon Terrain is 100 percent compatible with the Pro Series Grille Guard you asked about, which is the following part: - Aries Pro Series Grille Guard with Mesh LED Cover Plate # AAP4088 So this will fit your '18 Canyon Terrain and you are correct that your tow hooks will be kept on your truck. In regards to the light bar, there is an exact fit for this grille guard with the Aries Automotive...
    view full answer...

  • Will Carr C-Profile Rota Light Mounting Bar Fit 2006 Toyota Tacoma
  • The Carr C-Profile Rota Light Mounting Bar, part # CARR210111 and the Gutterless Mount Kit for Carr Light Bars, part # CARR220041 are both verified as a fit for your 2006 Tacoma. The light mounting bar does not come with the lights and is designed to be able to hold lights up to 50-inches long. If you are looking for a light bar I recommend a light like part # MT80633. This light is 31-1/2 inches long and has 60 LED diodes.
    view full answer...

  • How to Add Lights to the Roof of a 2016 Jeep Patriot
  • I do have an option for you but a 2016 Jeep Patriot is not exactly considered to be an off-road vehicle therefore they don't make any custom mount light bar kits for it. If you wanted to add lights to your roof without having to drill into the roof itself then your best option would be to mount some pod lights on a roof basket. In order to do this you will first need a roof rack if you do not already have one. For this, I recommend the Yakima CoreBar Crossbar System part # Y00421 and...
    view full answer...

  • Light Bar Recommendation for 1987 Chevy Blazer K5
  • The rotating gutter mount light bar part # CARR210111 that you referenced has been confirmed as a fit for your 1987 K Series Blazer since your Blazer has the same roof as the C/K style Chevy trucks. This light bar is designed for up to a 50 inch lightbar, but I am sure you could find a way to attach a 52 inch light bar to it. This product does have a limited lifetime warranty that would get voided if you were to modify it.
    view full answer...

  • LED Flood Light that Can Be Used as a Home Security Light
  • The MaxxTow Off-Road Light Bar # MT80636 runs off of 9 to 32 volt electrical systems (DC power) so it is not a good option for a house which uses AC power at a much higher voltage. A better option is Tow Rax light # TWSPRLB2L. This is an LED light that runs off of 110 to 130 volts AC power. For a light like this it has a power and ground wire so you would hook up a motion sensor, obtained locally, in line with the power wire.
    view full answer...

  • Off-Road Light Kit Options for 2006 Nissan Xterra
  • The Carr C-Profile Rota Light Mounting Bar # CARR210111 and Gutterless Mount Kit # CARR220051 are intended for the versions of the 2006 Nissan Xterra without the factory roof rack. For the Xterra with roof rack we offer several options from Carr in a bumper-mount light bar base plate that can hold 2 off-road lights. You can see these by clicking on the link provided. Part # CARR167303 is a chrome-finish aluminum mount that can accept lights like the Putco HID Off-Road Light # P231900...
    view full answer...

  • Wiring MaxxTow LED Light Bar to Rocker Switch on 2005 Nissan Xterra
  • It is possible to remove the power switch that is attached to the from the MaxxTow Off-Road LED Light Bar # MT80632 and connect it to a rocker switch. You would need to first install the light bar as normal, and use a circuit tester such as # 40376 to test the functions of the wires that run from the switch. Doing this would let you know how to wire your rocker switch.
    view full answer...

  • Recommended Wire For MaxxTow Off-Road Lights
  • We do not have a specific wire harness for the MaxxTow Off-Road Lights, part # MT70882 because it is universal and can be installed on so many different items. It is a 2-wire design so all you need is power for the red wire and the black wire is your ground. You can use part # 16-1-1 and # DW02359-1 that is jacketed Black and White wire. It is sold by the foot so you will need to keep that in mind when ordering. For butt connectors I recommend part # 05731-5. You can also install...
    view full answer...

  • Is Extra Wiring Needed to Install LED Light Bar on 2016 Honda Pilot?
  • Luckily, the answer is you will not need any additional wire at all to install LED light bar # MT80632 in your 2016 Honda Pilot. The light bar is a 2-wire design and comes with a total of more than 18 feet of wiring to connect the light to your vehicle. I've attached a couple of video reviews of this light bar for you to check out as well.
    view full answer...

  • Will # 09-0205 Driving Lights Work with Westin # 30-0025 Safari Bar on a 2001 Mazda Tribute?
  • The Westin # 09-0205 Driving Lights will work absolutely perfectly with your # 30-0025-1155 Safari Light Bar. They were unfortunately not able to provide me with any information about the amperage draw of the light kit. As far as the lamps causing an inadvertent draw on the battery goes, you won't need to worry about that happening as long as the lamps are installed according to the installation instructions.
    view full answer...

  • Can Putco High Power Luminix Light Bar P2281L Be Attached to License Plate Mount
  • This light bar is designed to attach to the included mounting bracket, which attaches to existing holes in your vehicle. The Putco High Power Luminix Off-Road Light Bar w License Plate Mount is intended to be installed either way, with the light bar on top of or under the license plate. For what you're needing it for, this sounds like the perfect solution to illuminate the area between your tow vehicle and camper while hitching or unhitching after dark. The light features a toggle switch...
    view full answer...

  • Driving Lights for a Carr M-Profile Light Bar on a 1981 Ford Bronco
  • For lights to use with the Carr light bar # CARR210702 you can use Westin lights # 09-05001.
    view full answer...

  • Installation Instructions for the Fog Light Kit - Halogen - 55 Watt - Oblong, # QH-84CF
  • I went out to the warehouse and pulled a Fog Light Kit - Halogen - 55 Watt - Oblong, # QH-84CF. After mounting the lights with the included brackets and hardware, you will disconnect the battery. Next, attach the included black ground wire extensions to each lights black ground wire. They will then get connected to the vehicle frame. Next, you will connect the white power wires on each light to the white power extension wires. Each of these will get connected to a longer white Y-extension. You...
    view full answer...

  • How Long are the Wires on the Vision X Tantrum Strobe Light Kit HIL-STW
  • I called Vision X and they said that there are four 10' long cords and four 20' long cords in regards to the lights on the Vision X Tantrum Strobe Light Kit w/ Remote Control part # HIL-STW.
    view full answer...

  • Amperage Draw of MaxxTow Off-Road Light Bar # MT80633
  • The MaxxTow Off-Road Light Bar # MT80633 that you referenced draws 15 amps.
    view full answer...

  • Bracket Mounting Install Instructions for Custom Bumper Mounting Bracket # XIL-OEB09F150
  • I attached pictures that I got from Vision X that detail the install of the Custom Bumper Mounting Bracket # XIL-OEB09F150 that you referenced.
    view full answer...

  • Can an LED Light Bar be Mounted to Carr Light Wing Off-Road Light Mounting System
  • The mounting holes are approximately 24 inches apart on the Carr Light Wing Off-Road Light Mounting System # CARR167301. We have not put an LED light bar on it but you could if you wanted to. I recommend the Vision X Xmitter Prime IRIS Off-Road Light Bar # XPI-12M if you are looking for the best. I have linked a video of it going through our test course. With this light I also recommend the mating wiring harness # HARNESSXIL.
    view full answer...

  • What Cars Does the Putco High Power Luminix Off-Road Light Bar w License Plate Mount # P2281L Fit
  • Yes, the Putco High Power Luminix Off-Road Light Bar w License Plate Mount # P2281L that you referenced is a universal fit item designed to attach to the included mounting bracket, which attaches to existing holes in your vehicle where your front license plate is mounted. It would work great on your 2003 Subaru Outback Sedan Limited. Check out the review video I attached for more info.
    view full answer...

  • Can Westin Driving Lights, # 09-0305, be Mounted Upside Down
  • The Westin Driving Lights, # 09-0305, can be mounted upside down, right side up, diagonally, side ways, horizontally, vertically, and any other configuration you can think of (within the limitations of its little mounting bracket of course). Basically, mount them how you want, where you want with the lens pointed in the correct direction for your application and they will work just fine.
    view full answer...

  • Light Bar Fit For Roof of a 2001 Nissan Frontier
  • Yes, the Lightbar part # CARR210111 and the mount kit part # CARR220051 has been confirmed as a fit for your 2001 Nissan Frontier so they would work well for you. This Light bar mount will hold up to a 50 inch light bar which are all sold separately like the part # P10050 or # XIL-LPX3910.
    view full answer...

  • Height and Depth of MaxxTow Off-Road Lights # MT70882
  • I went out to our warehouse to take a look at the MaxxTow Off-Road Lights # MT70882 referenced in your question. With the mounting bracket attached they have an overall height of right at 4-1/4 inches. The light housing has a depth of 2-1/2 inches. I have attached an image with these dimensions labeled to assist.
    view full answer...

  • Will a 52 Inch Light Bar Fit Putco Mount P2290 on 2004 Nissan Frontier & are Instructions Included
  • Custom Roof Mounting Kit # P2290 does fit your 2004 Nissan Frontier but it and all of the options, see link, will require drilling for installation. It will come with instructions. This kit was designed for a specific 50 inch light bar but different bars will potentially work such as your 52 inch bar. However there may be modification required to the mount kit, light bar, or both.
    view full answer...

  • Wire Gauge of MaxxTow Off-Road Lights
  • There isn't a formula for the wire gauge, you can simply match it up to the wire size used with this light, which is 14 gauge wire. I have added a link to a video review as well of the MaxxTow Off-Road Lights # MT80637-2.
    view full answer...