Expert Answers about Camper Tie-Downs
- Can the Brophy Clamp On Camper Tie-Downs Be Used On a Ford F-150 with Aluminum Bed
- We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part # HSSF. There won't be any issues with these tie downs and an aluminum bed so long as you are not exceeding other figures such as payload capacity etc. In order to secure the truck bed camper to these tie-downs you will also need the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs part # TDHP.
Although certainly...
view full answer... - Recommended Camper Tie Downs for 2020 Ford F-350 with Extended Running Boards
- You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs # TLF2021 and # TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since these are available you'll be able to go ahead and order those extended running boards. For rear tie downs, you'll want to use the # TLF3008 or # TLF3008A (aluminum), which are also confirmed for your new truck.
If you also need turnbuckles...
view full answer... - Recommended Tie-Downs for 2019 Ram 2500 Short Bed with Running Boards/Steps
- We do have camper tie-downs that will fit on your 2019 Ram 2500 but since you have the running boards none of the TorkLift Tie-Downs will fit. You could use parts # TLD2140 and # TLD3113 if you removed the running boards (or steps) but since I doubt that's something you want to do we need to look into alternatives.
One of the most popular options on our site is the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF which you would use with the Turnbuckles # TDHP. These drop into your...
view full answer... - Torklift Tie Downs that Fit 2021 Chevy Silverado 3500 Long Bed Dually
- For your 2021 Chevy Silverado 3500 dually, long bed we have the Torklift Tie Downs part # TL44FR and # TL84FR as a confirmed fit if you do not have factory step bars.
view full answer... - Tork Lift Camper Tie Down and Turnbuckle Recommendations for 2020 Ford F-250 Super Duty
- I recommend the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Front # TLF2022A and the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Rear # TLF3008A. It is worth having the aluminum as it is more corrosion resistant than the powder coated steel especially over the long run with your traveling in the winter to snowy regions that use road salt.
As far as the turnbuckles go, the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs -...
view full answer... - Which Brophy Camper Tie Downs Fit 2001 Toyota Tundra
- For tie-downs that will work in your 2001 Toyota Tundra you will want the Brophy Clamp On Camper Tie-Downs # HSSF. Brophy has told us in the past that the # HSWB was intended for domestic trucks.
These tie-downs are compatible with the turnbuckles # TDHP that you'd need to complete your camper tie down setup for your truck. This provides the connection from the tie down to the camper. I attached a review video for more info as well.
view full answer... - Recommended Camper Tie Downs for 2020 Chevy Silverado 2500 with 6-3/4 Inch Bed
- For your 2020 Chevy Silverado 2500 with 6-3/4 foot bed, the front # TLC2225 and rear tie down # TLC3221 are the correct fit for your truck. Whether you have the double cab or the crew cab and whether you have running boards or not these are the tie-downs confirmed to fit your truck.
The HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 # LC182895 are also a great option for your tie-downs that make securing your camper quick and easy.
view full answer... - Which Torklift Camper Tie Downs Fit 2020 GMC Sierra 3500 Single Rear Wheel, Long Bed
- I checked with Torklift and they recommend the # TL44FR for the front tie downs for your truck and then for the rear part # TLC3221. I confirmed these fit the version of the 2020 GMC Sierra 3500 that you have which has a long bed, single rear wheel setup, running boards and factory hitch.
For turnbuckles then we have the stainless Derringer # TLS9020 from Torklift as well.
view full answer... - Does the 2020 Ram 3500 Fornt Mount Camper Tie Downs from TorkLift Require Fuel Tank Removal
- I have a couple of pictures that I have linked for you showing the installed tie downs to use as reference. On the TorkLift Custom Frame-Mounted Camper Tie-Downs Front part # TLD2142 and Rear part # TLD3112 there are no notes in regards to temporarily removing the fuel tank. As for the compressor that is going to depend on exactly where it is installed.
I do not currently have an installation video.
view full answer... - Camper Tie-Downs For A 2008 Chevy Silverado
- I spoke with my contact at Brophy and they stated you'll be fine using the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 Item # HSWB as long as the railing on the back of your 2008 Chevy Silverado isn't over 5 1/2" wide on the top side and there needs to be a space of at least 2" wide on the underside of the railing.
I've attached an installation video to help you as well.
For turnbuckles I recommend the Brophy Basic Turnbuckles w/ Hardware for...
view full answer... - Recommended Frame Mount Camper Tie-Downs for a 2020 Chevy Silverado 1500
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Chevrolet Silverado 1500 Crew Cab or Double Cab is part # TLC2224 for the front and part # TL54FR for the rear if you have dual exhaust or part # TLC3220 if you have single exhaust. If you also need turnbuckles, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend.
view full answer... - Tie-Downs for 2003 Chevy Silverado 2500HD With 6-1/2 Foot Bed, Cab-Length Boards & OEM Hitch
- Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all distinct to the factory hitch. So for your '03 Silverado 2500HD with a 6-1/2 foot bed, cab-length boards, and factory hitch the tie-downs you need are the following:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2205
- Rear:...
view full answer... - Will Brophy Camper Tie Downs Work on 2020 Chevy Silverado 2500 Long Bed
- Yes, the Brophy camper tie downs part # HSSF that you referenced can fit truck bed that have plastic bed rail covers like your 2020 Chevy Silverado 2500. I attached a picture that shows them installed on a bed rail that has the covers like you mentioned. For hardware to attach the tie downs to the camper we have the # TDHP as well.
view full answer... - Where do Torklift Front Camper Tie Downs Mount on 2019 Chevy Silverado 1500 LD
- Since we haven't had a chance to install these in our shop, I've attached a couple pictures to show you where the Torklift Front Custom Frame-Mounted Camper Tie-Downs # TLC2217 install on the front of your truck. For the rear, you'll need part # TLC3214.
These are confirmed to fit your 2019 Chevy Silverado 1500 LD with the 6-1/2 Foot Bed with no board or step underneath truck bed and with a factory or aftermarket (other than Torklift) installed hitch.
For a set of Turnbuckles, I...
view full answer... - Will TorkLift Camper Tie-Downs Fit 2019 Ford F-350 Platinum with Factory Electric Running Boards
- The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2021 that you referenced are compatible with the factory AMP electric running boards on your 2019 Ford F-350. There won't be any interference between the two components. We have verified this with TorkLift in the past.
For the rear tie-downs you will just need part # TLF3008, assuming your F-350 is equipped with the factory trailer hitch. I have attached a short video demonstration that you can check out as well.
view full answer... - Brophy Camper Tie Downs for 2015 Chevy Silverado 3500 Single Rear Wheel
- I do have a solution for you, but the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not designed to fit on 2011 and newer pickups, so they will not work for your 2015 Chevy 3500.
The Brophy Clamp On Camper Tie-Downs # HSSF would be the correct camper tie downs for your 2015 Chevy Silverado 3500. These will work on the newer (non-dually) Silverados, as confirmed by Brophy.
The # HSSF will need to be used in conjunction with a tie-down hardware package consisting of turnbuckles,...
view full answer... - Recommended Camper Tie-Downs For A 2016 GMC 2500HD
- For your 2016 GMC Sierra 6-1/2 Foot Bed - Crew Cab - with board or step underneath truck bed and with a factory installed hitch the 2500 Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4
Item # HSAB with the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000lbs - Qty 4
Item # TDHP is your best option. It has a simple clamp on design that requires no drilling.
There are some requirements with these tie-downs: external bed rail width cannot...
view full answer... - Budget Friendly Slide-In Camper Tie Downs in 2013 Tayota Tacoma
- We have two good budget friendly choices. First is the Brophy # TDSF Stake Pocket Tie Downs. These bolt on to your truck rail and bed, and in my opinion offer a firmer hold. These have a black powder coat finish and work with most pickup trucks. I have included a dimensioned drawing so you can compare to your Toyota bed rails.
A no-drill alternative is the Brophy # HSAB Clamp On Camper Tie Downs. These can easily install and uninstall as you need them.
Either way you will want to...
view full answer... - Torklift Frame Tie Downs that Fit 2017 Ford F-350 Long Bed, Factory Hitch and Running Boards
- Yes, I checked with Torklift and for your 2017 Ford F-350 diesel with an 8 foot bed, factory hitch, and full length running boards the correct tie downs are the # TLF2021 and # TLF3008 that you referenced!
view full answer... - Correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Ram 3500 with Factory Hitch 8' Bed
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Ram 3500 with factory hitch and 8' bed is part # TLD3112 for the rear and part # TLD2140 for the front. This is a direct bolt-on fit option with no drilling required. In order to attach the tie-downs to the truck bed camper you can use the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK.
If you are looking for tie-downs for the camper, we do offer the TorkLift Camper Anchor Relocation Kit part # TLA7004.
view full answer... - How To Install The HappiJac Truck Mounted Camper Tie-Downs
- The support braces in the HappiJac Truck-Mounted Camper Tie-Downs # LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the bumper.
You'll also need some turnbuckles to properly secure your camper to your bed. I recommend the HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 # LC182898. These stainless steel turnbuckles allow you to...
view full answer... - Recommended TorkLift Camper Tie Downs for 2020 Chevy Silverado 2500 with 8 Foot Long Bed
- The Torklift tie downs you're looking for on your 2020 Chevy Silverado 2500 are the Front Tie Down # TL44FR and, if you have a factory installed hitch, the rear tie downs are part # TLC3221. These will fit on your 2020 Chevy Silverado 2500 Crew Cab without running boards or factory steps.
view full answer... - Aluminum or Powder Coat TorkLift Tie-Downs for a 2020 Ram 1500 When Available
- Currently (July 2020) only the powder coated steel TorkLift Tie-Downs # TL78ZR and # TL23RR for your 2020 Ram 1500 are available. When you can go with aluminum I do recommend it though simply because aluminum doesn't need a special coating to resist the elements like the powder coat that steel does. Powder coating isn't bad, it just means that you need to periodically check it and cover any places that have been scratched from road debris to help prevent rust.
view full answer... - TorkLift Camper Tie-Downs for a 2020 Ram 2500 With Step Under Cab and OEM Trailer Hitch
- The correct TorkLift tie-downs for your 2020 Ram 2500 are the following:
Front Steel - # TLD2140
Front Aluminum - # TL94FR
Rear Steel - # TLD3113
Currently (July 2020) there are no rear aluminum options.
view full answer... - Recommended Camper Tie Downs For 2019 Ram 3500 With 8' Bed
- I have another option, but the HappiJac Truck-Mounted Camper Tie-Downs # LC236326-205221 (FT-DR10) you mentioned is only a confirmed fit for the 6-3/4' Bed.
Since your 2019 Ram 3500 has the 8' Bed I recommend the TorkLift camper Tie-Downs Front # TLD2142 and Rear # TLD3112 if your truck has board or step extending under the bed, or if you have a fixed running board or step under the cab.
If your truck has the factory electric running board under the cab or no running board or step...
view full answer... - Brophy Camper Tie Downs 2006 Toyota Tundra
- The Brophy Camper Tie Downs are not custom fitted to vehicles the same as other tie down options. For your 2006 Toyota Tacoma, I recommend the Brophy Clamp On Camper Tie-Downs - Bed Mount - Black Powder Coated Steel - Qty 4 # HSAB. They will clamp into the bed rail of your truck and provide an attachment point for your camper. The same tie down but with a polished zink finish is # HSBP. Each comes with Neoprene pads to protect your truck's paint. Please see the attached photo with the...
view full answer... - Which TorkLift Camper Tie Downs for 2020 Chevy Silverado 3500 Crew Cab with 8 Foot Bed and Steps
- I can see how this is confusing, since our site often uses part numbers that differ from the manufacturer's part numbers, but the TorkLift # TL44FR is TorkLift part number- C2226 so that would be the correct front tiedown for your 2020 Chevy Silverado 3500 Crew Cab with 8 ft bed and steps. The rear tie down, as you noted, is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3221.
I've linked product reviews of these parts for you to check out, as well.
view full answer... - Why are Frame Mounted Camper Tie Downs for 2018 Ford F-250 More Expensive
- Brophy has a stake pocket mounted tie down setup that fits your 2018 Ford F-250 short bed with the part # HSWB but the # HSSF you referenced is not listed as a fit. Stake pocket tie downs are more universal in the trucks they fit, are a simpler design, and not quite as secure as the frame mounted styles which is why the cost of them is lower. They work but in general people prefer the frame attachment style since it's a much more secure attachment as the frame of the truck is much stronger...
view full answer... - Torklift Camper Tie Downs Recommendation for 2019 Ram 3500 8 foot Bed
- Thanks for all the info on your truck and camper Jack as that makes picking out the tie downs you need for your 2019 Ram 3500 very easy.
The tie downs you need are the # TLD2140 for the front and part # TLD3112 for the rear. Since you have a dually model you'll also want the # TLA7004 for the rear setup. These are custom fit to your truck specifically so you get a very easy to install and very secure attachment point for the camper to attach to.
Only thing else you'll need is a set...
view full answer... - Best Truck Bed Camper Tie Downs for 2022 Ford F-350 Short Bed
- The strongest camper tie downs for your 2022 Ford F-350 short bed without boards and a factory hitch is the Torklift tie downs # TLF2022A and # TLF3008A which are made from aluminum and stainless steel. This also means that it would never rust or corrode as well.
Then for a set of tie downs that are also strong and rust resistant we have the stainless steel Torklift FastGun part # TLS9529-2-LK.
view full answer... - Will HappiJac Camper Tie-Downs Fit 2008 Tundra With 6-1/2 Foot Bed & Running Boards
- I am happy to confirm for you that yes, your 2008 Toyota Tundra with a 6-1/2 foot bed and running boards that extend just under the truck bed will be able to install the HappiJac Truck-Mounted Camper Tie-Downs # LC184089.
These are the front and rear tie-downs, so along with these the only other thing you will need are compatible turnbuckles, the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898.
I have added links below to video reviews of both the tie-downs and turnbuckles...
view full answer... - What are Side Steps on 2021 Chevy Silverado 3500 for Picking Out Camper Tie Downs
- The boards/steps that are mentioned in the fitguide for the Torklift camper tie downs refers to the steps you sometimes see under truck cabs to make getting in and out of the truck a bit easier. Some call them nerf bars, side steps, tube steps etc.
Let's say you got an 8 foot bed 2021 Chevy Silverado 3500 with side steps, and a factory hitch. You'd want the part # TL44FR and # TL84FR.
If you had a different configuration let me know or follow the link I attached on this page where...
view full answer... - Torklift Camper Tie Downs for 2021 Ford Super Duty with 8 foot Bed
- For a set of Torklift tie downs that fit your 2021 Ford F-350 long bed you'd want the part numbers # TLF2021 and # TLF3008 which are custom fit.
For a rubber mat that fits your bed you'd then want the Westin part number # 50-6415.
For a 7-way extension we have a few options like the part # TLW6024 which is 24 inches long, part # TLW6036 which is 36 inches long, and part # TLW6042 which is 42 inches long.
view full answer... - Will TorkLift Tie-Downs Fit 2014 Ram 2500 Crew Cab With Steps
- If your 2014 Ram 2500 Crew Cab 8 foot bed has factory installed hitch and step boards the Torklift front tie downs # TLD2127 and rear # TLD3109 will clear your steps as long as they are not aftermarket Mopar rear-mounted kick out steps that are mounted under the bumper. We have had customers install the tie downs on their trucks with steps that extend to the box without an issue.
view full answer... - Camper Tie-Downs for 2020 Chevy Silverado 2500 Crew Cab with 6-3/4 Foot Bed & Factory Trailer Hitch
- I can absolutely let you know what frame-mounted camper tie-downs fit your 2020 Chevy Silverado 2500. What you need, since you have a 6-3/4 foot bed, the factory trailer hitch and no running boards are the following tie-downs:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2225
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3221
I have added links to video reviews of both tie-downs for you to check out as well.
view full answer... - HappiJac Camper Tie Downs that Fit 2004 Dodge Ram 2500 Long Bed
- We do have a HappiJac set of camper tie downs that do fit your 2004 Dodge Ram 2500 long bed with the part # LC182908-182928 but the part number you mentioned does not fit and would not work.
view full answer... - Correct Truck Bed Camper Tie-Downs for a 2018 Ford F-150
- I do have a truck bed camper tie-down option for a 2018 Ford F-150 but HappiJac does not offer the HappiJac Truck-Mounted Camper Tie-Downs for this vehicle. Instead, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs which are actually drill-free options unlike the HappiJac Truck-Mounted Camper Tie-Downs. That said, I need to know the bed length and board/step option to confirm fit, the part # TLF2018 for front and part #TLF3007 for rear are for models with 6.5' bed, and no...
view full answer... - TorkLift Camper Tie Downs For A 2022 Chevrolet Silverado
- Torklift specifies either you having full length running boards, or cab length running boards. I did some research, and if you have cab length, full length, or no running boards with a factory hitch, and a 8' bed # TL44FR and # TLC3221 will fit your 2022 Chevrolet Silverado 3500.
view full answer... - Is Item # HSWB And Item # TDHP Compatible With A 2020 Ford F-250
- Great question! Yes, the Brophy Clamp On Camper Tie-Downs Item # HSWB and the Brophy Basic Turnbuckles Item # TDHP are compatible with your 2020 Ford F-250.
view full answer... - How Do the Tie-Down Mounts on HappiJac Custom Tie-Downs for 1996 Ford F-250/F-350
- In regards to the HappiJac Custom Tie-Downs for Truck Bed Camper part # LC182910-182971 which is a fit for a 1996 Ford F-250/F-350, the front tie-downs mount inside the bed on the back wall and the rear tie-downs mount to the rear bumper. If you don't already have turnbuckles, I recommend the HappiJac Original Turnbuckles part # LC182898.
view full answer... - Will Happijack Turnbuckles Work With TorkLift Tie-Downs
- Turnbuckles like theHappiJac Original # LC182898 are more or less universal so you'll be able to use them with the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2303.
view full answer... - Recommended Camper Tie-Downs for 1997 Ford F-350
- For your 1997 Ford F-350, it sounds like you are seeking the camper tie-downs for an in-bed camper. I recommend the HappiJac Truck-Mounted Camper Tie-Downs # LC182910-182971 which will give you both the front and rear attachments confirmed to fit both long and short bed models of your specific truck. Then you can use the HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 # LC182898 or the Quik-Load Turnbuckeles # LC182895.
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2019 Ford F-250 Short Bed with Factory Hitch
- The correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2019 Ford F-250 Short Bed with the Factory Hitch is going to be part # TLF2022 for the front and part # TLF3008 for the rear. If you also need turnbuckles then I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9520-22-LK because they have locks for security, are made in the USA, and come with a lifetime warranty. They will be a perfect match for the above no-drill TorkLift Custom Frame-Mounted Camper...
view full answer... - Which TorkLift Tie Downs for 2019 Ford F-250 Super Duty Lariat
- I'll start out by saying that the Hidden Power system is an aftermarket addition made by TorkLift that basically adds an auxiliary battery- so it's most likely that you don't have that on your 2019 Ford F-250. When it comes to the factory self deploying running boards, as long as they don't extend beneath the truck bed, there's nothing to worry about.
When it comes to tie down mounts for your F-250, TorkLift is a great choice; they're well known for their quality and durable construction....
view full answer... - Will the Brophy Clamp On Camper Tie-Downs HSSF Fit a 2012 GMC Sierra 1500
- Yes, the Brophy Clamp On Camper Tie-Downs part # HSSF will fit a 2007-2014 GMC Sierra 1500 so they will work just fine on your 2012. The tie-downs will not be able to be installed at the very front and rear of the bed but this is due to the design of your bed rather than an issue with the tie-downs. That said, the turn buckles don't need to be perfectly straight so this won't be an issue. If you don't have turn buckles, I recommend the Brophy Basic Turnbuckles w/ Hardware part # TDHP.
The...
view full answer... - Camper Tie Downs For 2021 Dodge Ram 3500 With Wheel To Wheel Running Boards
- The TorkLift FastGun Turnbuckles for Frame-Mounted Camper Tie-Downs - Stainless Steel - Black - Qty 2 Item # TLS9529 will give you two of the fastgun turnbuckles.
I confirmed with TorkLift that the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front Item # TLD2142 would fit your truck as long as you have an 8' bed. If you have a short bed TorkLift currently doesn't have a front tie down manufactured for short bed 2021 Dodge Ram 3500 trucks.
For the rear I recommend the TorkLift...
view full answer... - Correct Camper Tie-Downs for 2019 Ram 1500 Quad Cab 4x4 6.4' Bed
- It sounds like you are looking for a set of frame mounted camper tie-downs for a 2019 Ram 1500 Quad Cab 4x4 6.4' Bed. If that is the case then I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TL78ZR for front and part # TL23RR for the rear. I also recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9522-2-LK.
view full answer... - Torklift Camper Tie Down Fit Recommendation for 2019 Ram 3500 Long Bed Dually
- The correct Torklift frame mounted camper tie downs for your 2019 Ram 3500 dually with an 8 foot bed, and factory cab length running boards is the # TLD2140 and # TLD3112.
If you're looking for turnbuckles to I also recommend the # TLS9529-2-LK for a stainless steel option.
view full answer... - Slide-In Camper Tie Downs For a 2021 Ram 1500 Crew Cab with 5-1/2' Long Bed
- The TorkLift Custom Frame-Mounted Camper Tie-Downs # TL23RR are confirmed to fit your 2021 Ram 1500 Crew Cab with the 67" bed length as long as you do not have the Mopar rear-mounted kick out steps that are mounted under the bumper.
If you also are in need of the front mounts they are TorkLift Custom Frame-Mounted Camper Tie-Downs # TL68ZR. These will also not fit if you have the factory flip-out steps that are mounted under the bed.
The TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK...
view full answer... - HappiJac Truck-Mounted Camper Tie-Downs for 1999 Ford F-350 With Long Bed and Factory Hitch
- The correct HappiJac tie-downs for your 1999 Ford F-350 with an 8 foot bed and a factory-installed trailer hitch receiver are the following:
- HappiJac Truck-Mounted Camper Tie-Downs # LC182910-182971
Then for turnbuckles you will need the compatible HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898.
I have added links to instructions and video reviews for you to check out as well.
view full answer... - TorkLift Talon Camper Tie-Downs Compatibility With A 2022 Ford F-350 With Factory Running Boards
- The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs # TLF2021A and TorkLift Talon Custom Frame-Mounted Camper Tie-Downs # TLF3008A are designed to work with a running board or step underneath the bed so you should have no issues with your factory running boards on your 2022 Ford F-350 Super Duty with an 8' bed.
If you need some turnbuckles to complete your setup then I recommend the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.
view full answer... - Will TorkLift Rear Camper Tie-Downs Interfere with Dual Exhaust on F-350 Diesel
- The factory dual exhaust pipes on the passenger's side of your 2014 Ford F-350 will not interfere with the installation of the TorkLift Custom Frame-Mounted Rear Camper Tie-Downs, part # TLF3006. I confirmed with Torklift that these are a fit for your 4x4 truck with the 8 foot bed, crew cab, with no board or step present underneath of the bed, and with the factory installed hitch.
The correct TorkLift Front Camper Tie-Downs for this application are part # TLF2016.
view full answer... - Recommended Slide-In Truck Camper Tie Downs for 2022 Ram 3500 Long Bed with Step Extending Under Bed
- For your 2022 Ram 3500 8 foot bed with a step that extends from the cab under the truck bed, I recommend the HappiJac Truck-Mounted Camper Tie-Downs, # LC236326-205221. The HappiJac Direct-to-Frame design ensures proper distribution of your camper's weight. The I-beam stabilizing bar installs horizontally between the front brackets to help create a truss-like structure that spans the width of your bed, down to both corners of your bumper, where the rearmost tie-downs install. Holding the...
view full answer... - Instructions For HappiJac Truck-Mounted Camper Tie-Downs # LC184089
- I have linked the instructions for the HappiJac Truck-Mounted Camper Tie-Downs # LC184089 that fit your 2013 Toyota Tundra below.
Be sure to get a set of HappiJac Original Turnbuckles # LC182898 as they are stainless steel and will last through the harsh elements.
view full answer... - Correct TorkLift Camper Tie-Downs for a 2019 Chevrolet Silverado 1500 with Dual Exhaust
- Yes, the correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2019 Chevrolet Silverado 1500 (No Steps, Factory Hitch, 6-1/2' Bed, Dual Exhaust) is part # TLC2224 for the front and part # TL54FR for the rear. If you don't already have turn buckles, the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK are what I recommend.
view full answer... - Torklift Camper Tie Downs for 2019 RAM 3500 6.5 Bed + OEM Hitch + Cab Length Running Boards
- Thank you for the photo - the running boards on your 2019 Ram 3500 with the 6-1/2 foot bed and the factory hitch are considered cab length running boards because they do not run underneath the length of the truck bed. Therefore, the correct Torklift Camper Tie Downs for your truck are # TLD2141 for the front, and # TLD3112 for the rear.
For a set of Turnbuckles, I recommend the TorkLift Locking FastGuns # TLS9529-2-LK.
view full answer... - Recommended Truck Bed Camper Tie-Downs and Turnbuckles for 2020 Ford F-250
- As you've found, unfortunately none of CR Brophy's tie downs are compatible with your truck, but we do offer tie-down fits from TorkLift. The correct tie-downs will depend on how your truck is equipped and will depend on the bed length, if the truck has wheel to wheel running boards or side steps that extend PAST the cab and under the truck bed and whether or not the truck has a rear hitch and who manufactured it.
So (deep breath) here are the various fits for the above mentioned possible...
view full answer... - Recommended Camper Tie-Downs For A 2010 Toyota Tundra Short Bed
- The HappiJac Truck-Mounted Camper Tie-Downs Item # LC184089 is not a confirmed fit for your 2010 Toyota Tundra because the frame is different and bends in the plates are different on the 5-1/2' beds versus the 6-1/2' and 8' beds.
The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2307 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3304 are a confirmed fit for a 2010 Toyota Tundra 5-1/2' bed.
You'll also need some turnbuckles to lock down your camper....
view full answer... - Correct TorkLift Camper Tie Downs for a 2020 Ram 2500 Crew Cab 6.5' Bed
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2020 Ram 2500 Crew Cab 6.5' Bed Factory Hitch (No Running Boards or Cab Only Running Boards) is part # TLD2140 for the front and part # TLD3113 for the rear. If you don't already have turnbuckles, I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9526-2-LK.
view full answer... - Recommended Tie Downs For 2020 Ram 3500 Dually Long Bed
- I have a solution for you, but the HappiJac FT-UT9 is designed for older model Dodge and Ford trucks, so they're not the correct tie downs. Additionally, there is not a HappiJac tie down that we have available for your 2020 Ram 3500 dually long bed.
Instead, if you don't have the board or steps that go under the truck bed and a factory hitch, you'll want to use the TorkLift # TLD2140 (front) and # TLD3112 (rear). These would be the correct camper tie downs for your truck. It should...
view full answer... - Recommended Frame Mounted Camper Tie-Downs for a 2019 Toyota Tundra Double Cab Short Bed
- Yes, I checked with TorkLift and can confirm the correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2019 Toyota Tundra Double Cab with 6-1/2' bed, Factory Hitch, and Running Boards (Stop at Cab) is part # TLT3306 for the rear and part # TLT2310 for the front.
If you don't already have turnbuckles then I recommend the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK which are stainless steel so they won't rust.
view full answer... - Which Torklift Camper Tie Downs Fit 2000 Ford F-250 Short Bed
- The correct Torklift Camper Tie Downs you need for your 2000 Ford F-250 short bed without factory steps and a factory hitch is actually the part # TLF2007 and # TLF3001.
view full answer... - Can I Use Camper Tie-Downs On My 2022 Chevrolet Silverado 3500 DRW With Running Boards
- I spoke to a representative from Torklift International and he said as long as your running boards do not extend beyond the cab you will not have any issues with camper tie downs. The camper tie-downs that fit your 2022 Chevrolet Silverado 3500 DRW will consist of the following custom fit items:
TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TL44FR
TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TL84FR
I have included product description links and video...
view full answer... - Which Torklift Tie Downs Fit 2020 Chevy Silverado 3500HD Short Bed, Crew Cab with Factory Hitch
- Torklift's site is a little behind with fit info but we know that for your 2020 Chevy Silverado 3500HD with a crew cab, running boards and a factory hitch the tie downs # TLC2225 and # TLC3221 are the correct fit.
view full answer... - Front and Rear TorkLift Camper Tie-Downs for 2006 Dodge Ram 2500 4x4
- There are both front and rear tie-downs for your 2006 Dodge Ram 2500 4x4, though the correct ones are going to depend on your bed size as well as if you have running boards or a step that go all the way underneath the truck bed. I will list out the options for you.
6-1/2 Foot Bed WITHOUT Running Board or Step Underneath Truck Bed
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2102
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109
6-1/2 Foot Bed WITH...
view full answer... - Torklift Camper Tie Downs that Fit 2020 Chevy Silverado 1500 with Factory Steps
- I attached a picture of the rear Torklift Tie Down that fits your 2020 Chevy Silverado 1500 part # TL54FR fitting with a set of factory step boards that you can check out. The matching front for your truck is the part # TLC2224.
view full answer... - Will the Brophy Clamp On Camper Tie-Downs HSAB Fit a 2012 Ford F-250
- Yes, the Brophy Clamp On Camper Tie-Downs part # HSAB will fit a 2012 Ford F-250 so long as you have a SRW model. If you have a DRW model then you won't be able to use a set of bed mounted camper tie-down and will instead need to use frame mounted camper tie downs, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF2012 and part # TLF3006 (Short Bed + Factory Hitch). I have attached turn buckles for each of these options.
Bed Mounted - Brophy Basic Turnbuckles part # TDHP
Frame...
view full answer... - Rear Camper Tie Downs For 2017 Toyota Tacoma Double Cab 4WD w/ 6 Foot Bed, OEM Hitch & no Boards
- I did confirm with the manufacturer, TorkLift, that the correct camper tie downs for your 2017 Toyota Tacoma 4WD Double Cab with a 6 foot bed, factory hitch and no running boards are:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT2303
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLT3307
Additionally, according to the manufacturer, no drilling is required to install the tie-downs on your 2017 Tacoma.
Then for turnbuckles I highly recommend the TorkLift...
view full answer... - Torklift Custom Frame-mounted camper Tie-Downs
- Based on the supplied image it does not appear that you have a running board under the bed. If you did it would extend nearly to the rear tire.
For a 2013 Ford F-250 without a running board under the bed, and with a factory hitch, the best camper tie-downs would be the TorkLift # TLF2016 (front) and # TLF3006 (rear) tie-downs. You will also want the TorkLift Locking FastGun Turnbuckles part # TLS9522-2-LK.
view full answer... - Camper Tie-Downs for 2015 Chevy Silverado 2500 6.5 Bed with Steps and Factory Hitch
- The TorkLift options for your truck are the # TLC2220 for the front and # TLC3215 as long as your steps do not run under the bed. If they end at the cab, then these will work.
If they do run under the bed, then instead you will want the HappiJac Custom Tie-Downs for Truck Bed Camper # LC350763-182971. This manufacturer is owned by Lippert Components who makes a majority of factory RV parts.
You may also want the turnbuckles # LC182898 or the Qwik-Load Turnbuckles # LC182895.
view full answer... - Recommended Camper Tie-Downs for 2016 Chevrolet Silverado 2500 and Palomino Bronco
- For a 2016 Chevrolet Silverado 2500 with a Palomino Bronco, I recommend the clamp-on type of camper tie-downs. We have two options of the Brophy Clamp-On Camper Tie-Downs that I recommend for your application.
- Powder Coated Black, # HSAB
- Chrome Plated Steel, # HSCP
If you select the black finish or the chrome, you will still use the same Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs, # TDHP.
These options are a full set of four and have all needed installation...
view full answer... - Correct Turnbuckles for HappiJac Direct-to-Frame Truck-Mounted Camper Tie-Downs
- The HappiJac Direct-to-Frame Truck-Mounted Camper Tie-Downs like part # LC182860 will work best with the HappiJac Original Turnbuckles for Camper Tie-Downs part # LC182898 when you replace the front turnbuckle j-hooks with the Replacement Threaded Hook for HappiJac Rear Turnbuckle part # LC149814. You can also obtain four of the Replacement Rear Turnbuckle for HappiJac Original Turnbuckle Set part # LC182900.
view full answer... - Recommended Camper Tie-Downs And Turnbuckles For A 2002 GMC Sierra
- For a 2002 GMC Sierra 3500 Dually 6-1/2 Foot Bed without board or step underneath truck bed and with a factory installed hitch I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2205 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3205.
If you have a 2002 GMC Sierra 3500 Dually 8 Foot Bed without board or step underneath truck bed and with a factory installed hitch I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2204...
view full answer... - Which Camper Tie Downs For 2019 Ram 3500 8' Bed W/ Factory Hitch and Factory Under Cab Steps
- I would be happy to help!
For your 2019 Ram 3500 with the 8' bed and the factory electric under cab steps and the factory hitch you will need the TorkLift Camper Tie Downs # TLD2140 and # TLD3112 which is a confirmed fit the the only caveat being the factory under bed kick down step will need to be removed. There is no frame mount camper tie downs that will work with the rear kick down step installed.
If keeping that step is a must then you could use the stake pocket tie downs # HSSF...
view full answer... - Does the TorkLift Tie Downs Part 3218 Fit a 2017 Chevy Colorado Z71 Short Bed Diesel
- Yes. The Torklift # TLC3218 are a confirmed fit on the short bed 2017 Chevy Colorado without board or step underneath truck bed and with a factory hitch, including the Z71 and diesel versions. The front tie downs are available with part # TLC2221.
view full answer... - Camper Tie Downs that Fit 1999 Dodge Ram 3500 Dually with Factory Hitch
- Since your 1999 Dodge Ram 3500 dually has a factory hitch, long bed, and boards that do not extend past cab the tie downs you'd need are the part numbers # TLD2100 for front and # TLD3101 for rear.
view full answer... - Torklift Tie Downs that Fit 2021 Ford F-250 Short Bed with Factory Hitch
- For your 2021 Ford F-250 with a short bed and a factory hitch we have the Torklift Tie Downs part # TLF2022 and # TLF3008 that are a confirmed fit and would work great.
For a set of turnbuckles with locks I really like the stainless steel FastGun Turnbuckles part # TLS9529-2-LK.
view full answer... - Recommended Camper Tie-Downs For A 2001 GMC Sierra 1500
- For your 2001 GMC Sierra 1500 with a 6.5' bed and factory hitch we have a few options. You could use the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2205 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3205 as long as you don't have a running board or step under the underneath the bed of the truck. If you do then you'll want # TLC4203 and # TLC3205 instead. The inserts of these tie-downs slide into frame-mounted brackets for use and easily remove for a clean,...
view full answer... - Recommended Camper Tie-Downs For A 2019 Arctic Fox Model 865 In A 2000 Ford F-250 Super Duty
- The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are meant for campers only up to 8' so you wouldn't be able to safely tie down your 2019 Arctic Fox Model 865 Truckbed Camper.
Instead I recommend the HappiJac Truck-Mounted Camper Tie-Downs # LC182910-182971 with the HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898. These custom-fit camper tie-downs permanently mount to your truck's body to distribute the weight of your camper and limit movement in all directions....
view full answer... - Which Torklift Slide In Camper Tie Downs for 2019 Ram 3500 Long Bed Dually
- Given how your truck is equipped, you'd want to go with either the Torklift # TLD2140-TLD3112 which are constructed of steel or # TL94FR-TL34FR which are stainless and aluminum. Either set will work with OEM fender flares, according to Torklift.
If your truck has the OEM for aftermarket kick out steps at the rear, they'll need to be removed to install the tie-downs. If the distance from the front of the camper to the rear anchor point is less than 90 inches, you'll also need the # TLA7004...
view full answer... - TorkLift Custom Frame-Mounted Camper Tie-Downs 2016 Ford F-350
- I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - front, # TLF2016. and for the rear, TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLF3006. These are confirmed fit for the 2016 Ford F-350 Super Duty and receive a current customer review of 4.8 from over 600 reviews.
I suggest the TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs - Stainless Steel - Qty 2, # TLS9050A to match.
view full answer... - Torklift Truck Camper Tie-Downs that Fit 2016 Ram 3500 Long Bed Diesel with Factory Hitch
- I confirmed with Torklift that the correct camper tie downs for your 2016 Ram 3500 long bed, diesel, with cab length nerf bars and a factory hitch is the part numbers # TLD2129 and # TLD3109.
view full answer... - TorkLift Custom Frame-Mounted Tie-Down Fit on 2020 Chevy Silverado 3500 With Short Bed
- The TorkLift Frame-Mounted Tie-Downs you referenced are a fit for your 2020 Chevy Silverado 3500 with a short bed so long as you have a Crew Cab or Double Cab, and either a factory trailer hitch or the TorkLift SuperHitch Magnum 30K. The correct tie-downs would be:
- Front: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC2225
- Rear: TorkLift Custom Frame-Mounted Camper Tie-Downs # TLC3221
For turnbuckles the best option is a locking set, the TorkLift Locking FastGun Turnbuckles...
view full answer... - What Else In Addition to Tie Downs Is Needed To Install Slide In Camper
- The TorkLift # TLC2205A and # TLC3205A Talon camper tie-downs will work great with your 2005 Silverado 2500 if it isn't equipped with running boards or tube steps that run under the truck bed and is equipped with the factory hitch.
The only other thing you'll need is turnbuckles like the stainless steel TorkLift Fast Guns, part # TLS9526-2-LK and a trailer connector in the truck bed if there isn't one there already. You can install one using part # 20110.
view full answer... - HappiJac Camper Tie-Downs That Fit A 2008 Chevrolet Silverado 3500HD Dually Long Bed
- Yes, the HappiJac Truck-Mounted Camper Tie-Downs # LC182904-182971 will fit your 2008 Chevrolet Silverado 3500HD long bed dually.
view full answer... - Recommended Camper Tie Downs for 2004 Dodge Ram 2500 Long Bed
- I recommend using the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2101 and # TLD3109, which are the perfect solution for your 2004 Dodge Ram 2500 with the 8 foot long bed. TorkLift tie downs are high quality parts that have a durable powder coating to keep them in great shape if they're exposed to the elements and these will mount to the frame of the truck instead of the truck bed, so they'll help keep your camper from shifting when backing your boat down the ramp or coming out...
view full answer... - TorkLift Camper Tie Downs Compatibility With 2021 Ram 3500 Auto Leveling System
- I spoke with TorkLift to confirm you wouldn't have any issues and their tech said on your 2021 model there shouldn't be any issues with it installing with where the air compressor is located. So the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front Item # TLD2141 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear Item # TLD3112 will be a good fit for your Ram 3500 Hemi SRW 4x4 Crew Cab Short Box.
If you need any turnbuckles I recommend the TorkLift Locking FastGun Turnbuckles...
view full answer... - Camper Tie-Downs for a 2006 Ford F-350 Super Duty with a 6-3/4 Bed and a Factory Installed Hitch
- It looks like your 2006 Ford F-350 with the 6-3/4' bed has no rails under the bed and a factory installed hitch. For this configuration, you have two options, depending on the hitch.
If your hitch has an open-ended crosstube, then the TorkLift set is your best option, part # TLF2007 for the front and part # TLF3004 for the rear. These tie downs do not require drilling, making them the easier installation. I've linked to video reviews of both.
If your hitch does not have an open-ended...
view full answer... - Is There Strength Difference Between Aluminum and Steel Torklift Tie Downs for 2022 Ford F-350
- Of the two part numbers you mentioned only the # TLF2022A is a fit for your 2022 Ford F-350 short bed without factory board and with the factory installed hitch. You might have meant to type # TLF2022 which is the non-aluminum/stainless steel option that fits your truck instead.
Strength-wise these are going to be right at the exact same as they were rated designed to be just as strong as the other but using different material. They are able to do this by using different thickness of...
view full answer... - Which Torklift Tie Downs Fit 2008 Dodge Ram 3500 Long Bed with Factory Installed Hitch
- The Torklift Tie Dowdn part # TLD3109 that you referenced is the correct rear tie down for your 2008 Dodge Ram 3500 Diesel 8 foot box with factory installed hitch. The matching front tie down is the part # TLD2101.
view full answer... - Which Happijac Camper Tie Downs fit 2006 Ford F-350 Crew Cab
- We have Happijac camper tie downs that fit your 2006 Ford F-350 crew with the part numbers # LC182910-182971 but the ones you mentioned are not a fit.
view full answer... - Difference Between Item #TLF2007 and Item #TLF2011 For A 2004 Ford F-250
- The difference is Item # TLF2007 is designed for a 6-3/4 bed on a 2004 Ford F-250 and Item # TLF2011
is designed for an 8' bed. The mounting location are different between the two bed sizes. Since your bed is 6-3/4 it would require Item # TLF2007.
view full answer... - Camper Tie-Downs for 2021 Chevrolet Silverado 3500
- For a 2021 Chevrolet Silverado 3500, 8 foot bed, dually, that has a factory hitch, and whose running boards do not extend to the rear wheel, the correct camper tie-downs would be the TorkLift # TL44FR (front), and # TL84FR (rear). These easily bolt to your truck frame with NO drilling or welding, and when not in use the arms can be removed to almost hide away remaining parts. Made in the USA and has lifetime warranty.
I also recommend Torklift Anchor Guard turnbuckles to complete your...
view full answer... - Torklift Camper Tie Downs for 2000 Chevy Silverado 2500 Short Bed without Step Bars
- The Torklift Camper Tie Downs you need for your 2000 Chevy Silverado 2500 short bed without step bars are the part # TLC2202 and # TLC3203.
view full answer... - Rear Camper Tie-Downs For A 2013 GMC Sierra 2500 With Upgraded 2-1/2" Factory Installed Receiver
- I contacted Torklift on your 2013 GMC Sierra 2500HD with the upgraded 2-1/2" receiver. They confirmed that Item # TLC3212 is compatible.
view full answer... - Can I Use The TorkLift Frame-Mounted Camper Tie-Downs On 2019 Ram 2500 With W2W Running Boards
- Yes, the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLD2142, will be able to fit your 2019 Ram 2500 Quad Cab 4 X 4, even if you have wheel to wheel running boards. There are two two adjustment holes on the side of the Torklift Tie-Downs specifically to help with accessories of varying sizes. They will be long enough that there will not be any interference between the running boards and the Tie-Downs.
I have included product description links and a demo video link below.
view full answer... - Do Brophy Stake Pocket Mounted Camper Tie Downs Fit 1992 Ford F-250
- Yes, the Brophy Stake Pocket Mounted Camper Tie Downs # TDSF will work in your 1992 Ford F-250.
Keep in mind that with these tie-downs you will also need the Brophy Basic Turnbuckles with Hardware for Camper Tie-Downs # TDHP.
I have added links to video reviews for you to check out as well of the Turnbuckles # TDHP and Camper Tie Downs # TDSF.
view full answer... - Which HappiJac Camper Tie Down Set Fits 1994 C/K Long Bed
- For your 1994 Chevy C/K that has a long bed, no step boards, and a non-Torklift aftermarket hitch the correct HappiJac tie down set you'd need is the # LC182910-182971.
view full answer... - Difference Between TorkLift Rear Camper Tie-Downs TLD3109 & TLD3109A For 2015 Ram 2500
- You are correct; the only difference between the two camper tie-downs is indeed how they are constructed; otherwise there is not a difference. One is made of aluminum and the other is powder-coated steel:
- Aluminum: TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Rear # TLD3109A
- Steel: TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3109
The aluminum is the more premium option because their aluminum construction means they are not going to rust,...
view full answer... - Truck Bed Camper Tie Downs for a 2016 F150 Super Cab Truck
- With your front sidewall being 6" wide you won't be able to use the truck bed style tie downs like you were wanting because they are only 5-1/4" in length. Instead I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2018 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3007.
I also recommend TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 Item # TLS9529-2-LK.
view full answer...
Go To Results