Thank you for your continued business!
You can absolutely use Malone Cam Buckle Load Straps with Buckle Protectors - 18' Long - Yellow - Qty 2 # MPG307-18 you were looking at to secure the bow and stern of your kayaks to your 2021 Audi AllRoad.
These will work perfectly with the Rhino-Rack Anchor Straps # RRRBAS-2 you purchased, and will be much easier than using a rope like you are currently using.
The Malone Cam Buckle is available in different colors but the each color is also... view full answer...
In regards to the etrailer Cam Buckle Cinch Straps part # E98876-4, the neoprene cover will not be able to apply enough force to disengage the latch. view full answer...
Yes it will! Your 2020 Chevy Blazer does have the appropriate distance between the crossbars so you can mount the Thule kayak carrier, which is the following part:
- Thule The Stacker - Rooftop Multi-Kayak Carrier # TH830
This post-style kayak carrier will give you a really easy way to haul up to four kayaks at once on top of your 2020 Chevy Blazer. This carrier comes with enough straps for one kayak, so in order to carry a pair, you will also need more cinch straps and tie-downs:
-... view full answer...
I'm not sure how long the straps can be for your application exactly but the Bulldog Winch Cam Buckle Straps # BDW20303 measure about 28 inches at their shortest. If the length is short enough to tighten then these will work well because they're tough straps.
If they aren't going to work ratchet straps like the Erikson # EM31352 will work just fine for you as well view full answer...
For straps to use to strap down your canoe we have the etrailer.com Cam Buckle Cinch Straps # E98876-2 which are 13 feet long and have a safe working load limit of 293 lbs so they will work really well. These were designed with carrying canoes in mind so they will work really well and be easy to use for your application. I attached a review video for them with more info as well. view full answer...
Yes, if you used 4 of the ShockStrap Cam Buckle Tie-Down Strap w Shock Absorber # 297-6CSRP-2 you could secure your 3,000 lb race car well. Each of these have a 1,500 lb break strength rating. view full answer...
Given that trailer suspensions aren't as forgiving as those found on passenger vehicles, I wouldn't recommend the Yakima # Y88890152. This is designed to be one of six straps holding a trunk mounted bike rack to a vehicle, and likely wouldn't be up to the task, especially given all the bouncing around that happens on a trailer.
Using the Erickson # E19146 vertical e track mounted horizontally above and below your ladder along with the # SLLS28CER strap would provide a bulletproof method... view full answer...
Yes, the Lockstraps Cam Buckle Strap w Combo Lock Carabiners # LS101 that you referenced is knife proof since the the straps have a 3 mm stainless steel interior cable that runs the entire length of the strap. view full answer...
If someone had enough time with the Lockstraps Cam Buckle Strap # LS101 and a grinder they would be able to cut through it. This is a stainless steel reinforced strap though so it wouldn't be an easy task. In general this will stop nearly all casual thieves but maybe not a thief who has time to prepare. view full answer...
I spoke with my contact at Erickson and they informed me that the hook of the Erickson Buckle Tie Down Straps part # 05605 is 1/4 inch diameter and from the center of the cam buckle to the hook measures 6 inches.
I attached a review video for this for more info for you to check out as well. view full answer...
You can carry an extension ladder on your 2013 Scion xB with the Yakima Q Tower Roof Rack, but there are a few factors you will want to take into consideration. Once this roof rack is installed, you will have a crossbar spread of 45 inches. The crossbar spread is the distance from the center of the front crossbar to the center of the rear crossbar.
The most important factor to consider is the weight of the ladder. The Yakima Q-Tower crossbars have a weight capacity of 165 lbs, however,... view full answer...
The etrailer Cam Buckle Cinch Straps w/ Buckle Protectors - 1" x 13' - 293 lbs - Qty 4 # E98876-4 is my recommendation for your cargo trailer and lawnmower. The cam style straps will hold well and will help resist damage that could happen from overtightening a ratchet style strap. The buckle protectors will also help protect paint and plastics. view full answer...
What you are looking for is a transom strap. We have the BoatBuckle Kwik Lok # IMF17631 which is 2 feet when fully extended that would work well. view full answer...
Our only stainless steel straps come in the forms of a BoatBuckle Ratchet Gunwale Tie-Down Strap # IMF12597 and BoatBuckle Stainless Steel Kwik-Lok Gunwale Tie-Down Strap # IMF12070.
The Malone Cam Buckle Load Straps with Buckle Protectors # MPG307-12 feature a galvanized cam with a neoprene padded protector to prevent damage from the steel cam. The galvanized coating will help to resist rust and corrosion caused by the salt water. view full answer...
On the Erickson E-Track Strap with Cam Lock Buckle, part # EM59151, the strap length of the fixed section end is 7 inches. I did a short video of the strap to show you how I measured it.
I also have the Erickson E-Track 2 Inch D-Ring, part # E59143, that can be used with the e-track system. It is just the fixed end that snaps into the e-track and the length of the strap is 6 inches. view full answer...
There sure is!
First you are correct that according to the owner's manual of your 2017 Subaru Forester you are limited to a 200lbs tongue weight.
Since you have the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98839 installed on your 2017 Subaru Forester has a 525lb tongue weight rating you can use a dual hitch adapter # MT70070 which will reduce the tongue weight capacity by 50%, and not the capacity of your vehicle. This will still allow... view full answer...
To hold 4 bikes with the Bike Adapter For Draw-Tite and Reese Cargo Carriers you would need to load the bikes with the handle bars in alternating directions, two on each side of the bar, and then use tie downs, item # 05605, to attach the bikes to the carrier and support bar.
If you need to carry 4 bikes a hitch mounted bike carrier (see link) would most likely be a better option for you. This option will keep the bikes form contacting each other and causing damage to the bike finish... view full answer...
The Lockstraps Cam Buckle Strap, Item # LS101, only has one strap. This self-locking tie down strap allows you to easily secure just about anything with its combinations of carabiners by using the tip of a ball-point pen. A stainless steel interior cable runs the entire length of the strap. The safe working limit of one strap is 500-lbs with a break strength of up to 1,500-lbs.
I have attached a video for you to check out. view full answer...
We can get your 2019 Volkswagen Tiguan set up to carry three kayaks, but the part you mentioned is a specific fit for a Malone trailer and won't fit your Tiguan. Instead, since your Tiguan has raised side rails, what you will need to is add a roof rack and then a kayak carrier. Having those raised side rails is really nice since you will only need a couple of parts to add a roof rack, which are the following:
- Inno Aero Crossbars # INXB130-138
- Inno Through Feet for Aero Crossbars... view full answer...
I have a great solution for you. While I could not identify the particular straps used on the attached video, I recommend the CargoBuckle Cam Buckle Tie-Down Straps w/ S-Hooks - 1" x 6' - 267 lbs - Qty 4 # IMF12637 to use on the 24x60 Surco Cargo Carrier for 2" Hitches - Steel - 500 lbs 52018.
If you need a hitch-receiver recommendation for your vehicle, I would be glad to assist you if you confirm the year/make/model of your vehicle. view full answer...
We do offeradjustable tie downs with cam buckle straps that are 6 ft long. If you need a strap that is 1 inch wide I recommend the Master Lock Tie Downs, part # 3113DAT. These have S hooks with retention clips and have a safe working load limit of 400 lbs. I have attached a product review video for these tie downs you can check out.
These tie downs come with a qty of 2 in the package.
view full answer...
We have several bike racks that are recommended for use behind a travel trailer, see link. For 4 bikes, I would select the Swagman Hitch Bike Rack, # S64400, and the RV Bumper 2 inch Trailer Hitch Receiver, # E-100, if the trailer bumper is a 4 inch square all steel channel bumper. This bike rack measures 14-1/2 inches from the center of the first hitch /pin hole to the back of the upright bar, so it will clear a spare tire as long as the distance from the center of the hitch pin hole to... view full answer...
Sounds like a cam buck tie down strap like the part # 297-10BB would be a great option for your situation.
This is a 10 foot long strap with a bit of give in it that would probably work well for you depending on how you'd be able to attach it to your setup. view full answer...
I went out to the warehouse and pulled a Snap-Loc E-Track Tie-Down Strap # SLLS28CER to measure the fixed end. The overall length is 9-1/2 inches.
If measuring from the end of the buckle though it is shorter, measuring about 8-3/4 inches long. view full answer...
There is not a longer ramp available than the 39-3/8 inch long ramp that comes with the etrailer Motorcycle Carrier with Ramp for 2" Hitch # e98873.
This carrier has a 500 lb capacity so it will easily be able to haul your 300 lb V-Star, and if you do go with it you do have the option of adding a lock with the Threaded Anti-Rattle Hitch Pin Lock # e99047.
The only other thing you will need are tie downs, the Motorcycle Tie Downs # SS6-SL14.
I have added a link below to a video... view full answer...
You'd have to go to a larger size of tie down to fit over a 1 inch diameter bar like the Erickson Ratchet Tie Downs part # EM31425 which has an opening of 1-1/4 inches. The # 3113DAT is designed for bars that are 7/8 of an inch in diameter. view full answer...
What you'd want is the ShockStrap Soft Ties for Motorcycles and Dirt Bikes # 297-2STB-2 as this will allow you to loop around the handlebars and the clip will be able to close. Typically if the bike is secured proplerly the spring clips really aren't needed. Most tie-downs for motorcycles/bikes don't have them and they simply get depressed when using on a wider bar without issue. view full answer...
I confirmed with my contact at MaxxHaul that the thickness of the shank tube on the MaxxTow 27x47 Cargo Carrier w/ Pivoting Ramp MT70100 is 0.14 inches.
If you need straps to secure your cargo, the etrailer Cam Buckle Cinch Straps w/ Buckle Protectors - 1" x 13' # E98876-4 is a great choice. view full answer...
If you are needing just the strap part from the Erickson Cam Buckle Tie-Down Straps w/ S-Hooks # EM34409 then you will need to get the whole kit as we do not offer only the straps. Typically when a strap has worn down enough the entire kit needs to be replaced. view full answer...
You'd have to go with a longer set of straps to get you the additional length you'd need. The ShockStrap Cam Buckle Tie-Down Strap # 297-19BR is a 19 foot long strap that would work great for you. view full answer...
I went out to our warehouse to take a look at the ProGrip ME Series Cam Buckle Tie-Down Straps # 317-412080 that you referenced. I tightened the strap all the way down and measured a length of right at 28 inches end to end from each hook. This is the shortest possible adjustment on the strap.
I have included a short video review that you can check out as well. view full answer...
In order to carry your generator on the back of your 5th wheel, you will need a hitch so you can attach a cargo carrier. Assuming the ramp on your Palomino will allow the hitch, you can easily add one, the Adjustable Width Trailer Hitch Receiver for RVs # 13703.
You simply need to measure the frame to make sure it is between 22 and 77 inches wide outside-to-outside in order to install this hitch, which can then be bolted or welded on.
The hitch has a 350 lb tongue weight capacity,... view full answer...
I included a video of the Lockstraps Cam Buckle Strap w Combo Lock Carabiners # LS101 being used that should help, but you will need to make sure both are unlocked. They should come out of the box with the combination 0-0-0 to open them. With all the numbers at 0, you will need to compress the locking part down towards the strap. This should them allow you to move the locking part into place where it can mate to the upper part of the hook.
To change the combination, you will need to... view full answer...
While you didn't mention the specific Stealth Hitches hitch, so long as the one you are looking at has the needed tongue weight capacity and is a 2 inch receiver, there is a motorcycle carrier you can use, from Ultra-Fab:
- Ultra-Fab Dirt Bike Carrier for 2" Hitches # UF48-979033
While the # UF48-979033 says "Dirt Bike Carrier" it has a 500 lb weight capacity, 77 inch length, and inside track width of 5 inches, so as long as your motorcycle fits within those parameters it will work... view full answer...