We do offer teardrop style clearance lights in red, the Pacer Performance Hi-Five Truck Cab Light Kit part # PP20-215 which are sold as a set of five. These lights by law must be installed so that they face the rear of your vehicle. They come with the switch and all other hardware needed for installation.
view full answer...
Yes, it is. You will be able to switch back and forth between the LED bulbs and the incandescent bulbs on the Pacer Performance Hi-Five LED Truck Cab Light Kit - Dodge - 5 Piece - Amber LEDs - Amber Lens, part # PP20-244, by just removing the cover and replacing the bulb.
I have included a video review link below. view full answer...
I have two options for you. To get roof lights on your 2017 Chevrolet Silverado 2500, you can use most of our roof lamp lights as they are universal fits. However, the two that I have for you are modeled after Chevys, so they will look better. And, of course, they both feature amber LED lights with smoke lenses.
The first is the Pacer Performance Hi-Five 5-Light, part # PP20-221S. These are modeled after the 1988-2002 Chevy/GMC truck lights and are made up of 5 individual lights that... view full answer...
The LED lights that come with the Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-206 are amber. The amber lens cover is just part of the clearance light look.
Attached is a review video for you to check out. view full answer...
Yes, the Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-244C is just a simple drill-in installation so you would most likely only need some additional 18 AWG wire and some heat shrink butt connectors # DW05743-5 to complete the connection to the running light circuit. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Light Kit - Ford # PP42FR is confirmed to fit your 2020 Ford F-250 Platinum. As far as the installation, since the Hi-Five involves a toggle switch, the live wire on that switch will have to be spliced into a constant hot lead power source. I went ahead and attached a diagram of the setup from the switch to help clarify the wiring process. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Lights - Dodge - 5 Piece - Amber LEDs - Smoke Lens # PP20-247S only fits 2003 to 2017 Ram models but comes with both the bulb and the LEDs. Then # PP20-246S has just the amber bulb option. My recommendation for you is the # PP20-247S which I confirmed with the manufacturer will fit your 2017 Ram 3500.
The # PP20-244S only fits 1999-2002 Ram models and only has the LEDs and then # PP20-245S only has the amber bulbs.
view full answer...
For the Pacer Performance Hi-Five Truck Cab Light Set # PP20-106 replacement lenses are not available. I called my contact at Pacer to confirm. Only solution is an all new light set. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-236 referenced in your question is designed to look like the factory cab lights on your 2002 Ford F-250 but I can't be certain if the mounting holes are the same as what you have. I went out to our warehouse to take a look at the lights and I measured a distance of right at 1-3/4 inches between the two mounting holes, on center. The larger hole for the wiring is centered between them.
The overall dimensions of the light are... view full answer...
Yes, I confirmed with Pacer that the Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-244 will fit your 2006 Hummer H3. The LED light kit has a positive and negative pigtail on them that can be attached using your current running-light setup. In addition, the lights # PP20-244C and the # PP20-244S will fit your 2006 Hummer H3 as well. view full answer...
They do not provide instructions for wiring the Pacer Performance Hi-Five LED Truck Cab Light Kit part # PP20-236 directly to the running lights but it is very possible. Basically you need to use a probe tester like part # PTW2993. This will allow you to check the wiring behind your headlight switch to determine which wire is for your running light circuit. You will test the wires with the running lights only on and see what wire is hot. Then turn them off if it loses signal it is the one... view full answer...
I reached out to Pacer Performance to get some clarification on whether the Pacer Performance Hi-Five LED Truck Cab Light Kit part # PP20-250 will line up directly or not and there is great news. These use OEM bases so they will line directly up to your current holes and allow you to change the look of them quite easily. view full answer...
Yes, you can wire the Pacer Performance cab lights # PP20-106 the same way as the existing lights on your RV. You would just wire them up to the wires from the existing lights and not use the included switch.
If you seal up the lights it will be harder to access the bulbs. But since they are LED lights they will last a lot longer than incandescent bulbs so that may not even be an issue. Sealing the lights completely should prevent moisture getting in them so if you wanted to seal them... view full answer...
Yes, the Pacer Performance Hi-Five LED Truck Cab Lights # PP20-236 will fit your 2016 Ford F-250 Super Duty.
These lights are actually a universal fit and not vehicle-specific so you won't have any problems with them working on your '16 F-250. view full answer...
Yes, we do sell LED truck cab lights like the Pacer Performance Hi-Five LED Truck Cab Light Kit part # PP20-236 which are designed for Ford's so they will work great on a 2016 Thor Outlaw view full answer...
The Pacer Performance Hi-Five Truck Cab Lights part # PP20-235 are designed to be ran to a toggle switch which is included in the kit. Unfortunately, I cannot recommend you wire them inline with the headlights on your 1994 Ford F-150 as this may exceed the maximum capacity of the factory headlight circuit.
The included instructions will show you how to properly install the lights in addition to including everything needed to do so. view full answer...
Each of the LED bulbs that come with the Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-206 are capable of 240 Lumens raw. The lights that come with this are round and not wedges. The incandescent bulbs are an interesting option they give you. Basically if you wanted to run either style of bulbs you have the option to. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Lights # PP20-236 referenced in your question include a toggle switch that you can wire the lights to for easy operation. With that being said, you can certainly wire them to the running lights circuit in your truck if you would rather them just come on with the vehicle lights. You just would not use the switch that comes with the light kit.
I have attached the complete installation and wiring instructions for this product that you can also... view full answer...
The Pacer Performance Hi-Five Truck Cab Lights - Chevy/GM - 3 Piece - Amber Bulbs - Amber Lens # PP20-240 is a universal fit that is designed to mimic the 2002-2006 factory roof lights on GMC and Chevy trucks.
It will absolutely fit your 2001 Chevy Silverado 2500 HD truck. I've attached the installation details to assist. view full answer...
The CIPA EVO Formance T5 LED Dashboard Bulbs - Cold Blue - Qty 5 # CM93253 are sold in packages of 5, so the price on the product page is for 5 of the bulbs. view full answer...
Pacer Performance Hi-Five Truck Cab Lights # PP20-236 are designed for Ford trucks and will not fit your 2005 Dodge Ram 2500 but they do offer # PP20-246S, # PP20-247S, # PP20-246C, or # PP20-247. The only difference is the lens style among these 4 options. view full answer...
The mounting holes for Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-206 are indeed 3 inches apart on center. So it sounds like you will be able to use the same mounting holes! view full answer...
The lights in light kit # CB-15AK measure approximately 5-1/2 inches long, 2-3/8 inches wide (at the widest point), and 1-5/8 inches tall at the tallest point. I have included a dimensional drawing for you. view full answer...
I went out to the warehouse to take a look at the Pacer Performance Hi-Five Truck Cab Lights # PP20-105 referenced in your question.
I measured the distance between the two mounting holes to be 6-1/2 inches center to center. The underside of the light does have a very slight curve and features a flexible rubber padding that should be able to adjust to the contours of your 1954 Ford F-100 cab.
I have also attached the installation details on this product for you to check out so you... view full answer...
The Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-236 is 1-3/4" tall. These LED lights are the perfect solution to replace incandescent lights since they'll last up to 50 times longer and they come with a toggle switch included so that they can be controlled from the cab of your truck.
I've linked a brief review video of these lights that you may want to have a look at, as well. view full answer...
The white wires you are referring to are almost certainly the ground wires from your previous lights. The Clearance Light Kit # CB-15AK grounds through the mounting hardware so you will not need to connect the white wire to the lights in this kit. view full answer...
The lights in the teardrop light kit # CB-15AK ground through the mounting hardware so you would need to either attach them to metal or have the mounting hardware go through a ring terminal on the end of a wire and attach the other end of the wire to a bare metal surface. view full answer...
The Pacer Performance Hi-Five Truck Cab Lights # PP20-205 has two wires, the white wire is the ground and the red wire is the positive wire. The white wire must be grounded to a clean metal surface and the red wire will run to the power source or switch. If you want to wire several of these to the same circuit, then all of the red wires will splice into the positive wire going to the power source or switch and all the white wires can either be grounded individually or spliced together and... view full answer...
Clearance Light Kit # CB-15AK has incandescent lights. For LEDs I recommend # PP20-206. Either kit includes wiring and a switch as well as mounting hardware. view full answer...
According to Pacer Performance, the lenses of the # PP20-244 cab light kit are a little different than the OEM, but they will work as a direct replacement. Actually, because they're LED lamps, they might work better than the OEM lamps they replace.
I've linked to a product demonstration video featuring the cab light kit. view full answer...
I checked with Optronics and the teardrop cab clearance lights # CB-15AK are only available in amber. But we do have a similar cab clearance light in red, # CB22RB. I have linked a video review to the right for this light. view full answer...
The red side marker teardrop lights we offer, part # CB22RB have a different dimension than the size you mentioned you need. These lights measure 3-7/8 inches X 3-1/8 inches.
I spoke with my contact at Optronics and they do not offer a red marker light that measures 5-1/4 X 2 inches. The side marker light that is closest to the size you mentioned is part # CB-15AK. As the attached photo shows, it measures 5-1/2 inches X 2-3/8 inches and has an amber lens. These are not available with... view full answer...
The Pacer Performance Hi-Five Truck Cab Light Kit # PP20-225 referenced in your question are designed specifically to look like the factory roof lights on your 1988 Ford truck. With that being said these are not direct replacements so I recommend taking a quick measurement on one of your current lights to ensure that these will install using the existing bolt holes.
I went out to our warehouse to take a look at the Pacer Light Kit and I measured a distance of 2-3/4 inches between the... view full answer...
I have attached a photo of the # CB-15AK clearance lights with the dimensions noted. You will need to check the roof of your F-250 to see where you want to position the lights.
This kit comes with 5 teardrop shaped amber clearance lights, a wiring harness, hardware, and a switch for an easy install. view full answer...
A roof with a slight curve should not be a problem for the teardrop marker lights # CB-15AK. But if you notice any gap then you will want to put a bead of sealant such as # 0160297 around the lights to close up that gap. You don't want to use anything that is too extreme because it might not come off! view full answer...
The Amber Teardrop Shape Clearance Light Kit part # CB-15AK uses a single wire installation therefore grounds through the mounting hardware. In order to install these lights on a fiberglass or non-metal surface you will need to run a ground wire from each light using a ring terminal and then attach this to a bare metal surface. Similar to the power circuit, you will feed a ground wire through each hole in the surface and then combine these and run them to a bare metal ground point.
I... view full answer...
Good news, I was able to find the bulb number you will need to replace this light.
It is bulb type for # CB-15AK is type 67, our part number for this bulb is # 67. view full answer...
There really isnt a guideline on how far apart the tear drop lights of the Clearance Light Kit - Teardrop Shape - Amber - Qty 5, # CB-15AK should be. If you are unsure I think the best option would be to evenly space the lights apart. To do that you would need to measure the distance between the outside 2 lights and then divide by 4 and then you will know how far apart each light should be. view full answer...
The Pacer Performance Hi-Five Truck Cab Light Kit - Chevy/GM - 3 Piece - Amber Bulbs - Amber Lens # PP20-240 are modeled after the 2002-2006 Chevy/GM factory roof lights, but are not exact replacements so drilling may be required. The wiring is also not a direct fit to the factory lights so you will need to check out the installation instructions for differences. It will offer a nice upgraded look for your 2001 Chevy Silverado.
If you don't need to replace your factory lights, you... view full answer...
The Pacer Performance Hi-Five LED Truck Cab Lights - Teardrop Style - 5 Piece - Amber LEDs - Amber Lens # PP20-206 or Pacer Performance Hi-Five LED Truck Cab Lights - Chrome Plated - 5 Piece - Amber LEDs - Amber Lens # PP20-106 will work with your 6V system. LED's draw far less amperage but with half the voltage, they may still be about 1/2 as bright as intended and the life of the light will be reduced.
If you go with the Clearance Light Kit - Teardrop Shape - Amber - Qty 5 # CB-15AK... view full answer...
The replacement LED bult kit you'd need for the # PP20-206 that you referenced is the # PP20-102 which comes with a set of 5 lights. view full answer...
No, you will not need to use a nut on the back side of the installation screws for the Optronics Clearance Light Kit, # CB-15AK.
The basic installation instructions for the Clearance Light Kit, # CB-15AK, are as follows: First disconnect the battery. Next, determine where you want to position each light on the roof of the truck. Then, remove the lens from the base on each light. Use the included gasket as a template to mark the center of the two largest holes for the mounting screws... view full answer...
The lights in the teardrop light kit # CB-15AK ground through the mounting hardware so you would need to either attach them to metal or have the mounting hardware go through a ring terminal on the end of a wire and attach the other end of the wire to a bare metal surface. view full answer...
I spoke with Pacer Performance about the Pacer Performance Hi-Five LED Truck Cab Light Kit part # PP20-221 and they informed me that the mounting holes on the base of the light are spaced 2-5/8" apart on center. view full answer...
The # CB-15AK clearance light kit is designed to be screwed to the vehicle surface, so you will need to do some drilling. To install the lights, you will take off the lens as though you were changing a bulb. You will see two pre-made holes in the black light base. You can use these holes as a template. The power wire for the light will also require drilling to run the wiring into the inside of the vehicle. Once you have attached the base using two of the included screws, you will reattach... view full answer...
The Optronics # CB-15AK is a universal kit that comes with everything you would need to install these lights to your truck. They measure 5-1/2 inches long by 2-3/8 inches wide, see attached diagram I've made for you. They are designed to have a universal fit and therefore fit many vehicles on the market including your 2005 Ford F-250 Super Duty. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Light Kit # PP20-265 is designed to mimic the factory GM roof light but it is going to require drilling for the mounting holes and wiring. The instructions include a convenient template to use for drilling these holes, which I have attached below just so you can see how it looks.
You will need a 1/8" drill bit for this process. view full answer...
Between the Pacer Performance Hi-Five LED Truck Cab Lights # PP20-265 and the # PP20-265S the non-smoked version would give off a brighter light.
Any time you put tinting on a lights lens you end up reducing the brightness of the lights behind them. This is especially true for LEDs as they do not handle tint as well as incandescent bulbs. view full answer...
A template is not included with the # CB-15AK nor is one needed to complete the install. Here's the install instructions though:
First disconnect the battery. Next, determine where you want to position each light on the roof of the truck. Then, remove the lens from the base on each light. Use the included gasket as a template to mark the center of the two largest holes for the mounting screws and the third center hole for the wiring.
In the vehicle, loosen the headliner for easier... view full answer...
The lights in the Optronics Clearance Light Kit # CB-15AK measure 5-1/2 inches long and 2-3/8 inches wide. We do carry the Pacer Performance Hi-Five Truck Cab Light Kit - Teardrop Style part # PP20-205 which comes with 5 teardrop style cab clearance lights that measure 4-5/8" long x 2-1/16" wide x 1-3/4" tall. This is the smallest option we carry. This option also comes with a toggle switch. view full answer...
We have a set of replacement cab lights that do fit your 1994 Dodge Ram 2500 but the # PP20-244 does not fit as it fits newer trucks. Instead you'd want the Putco PURE kit part # P900532 which is a confirmed fit and gives you a set of LED style cab lights that will be very visible and will last you a long time. view full answer...
The distance between the mounting holes on the lights in the Optronics Amber Teardrop Shape Clearance Light Kit, part # CB-15AK is 3 inches center-to-center.
This kit includes the wiring harness, the hardware, and a power switch along with the 5 lights. view full answer...
The Pacer Performance Hi-Five Truck Cab Lights are available in both red part # PP20-215 and amber part # PP20-205. The red cab light has a clear incandescent bulb housed in a red cover whereas, the amber set has an amber lens and amber incandescent bulb.
The dimensions of both cab lights are as followed: 4-5/8" long, 2-1/16" wide, and 1-3/4" tall.
Both of the light sets will need to be hardwired into your vehicle's electrical system with minor drilling required. For replacement bulbs,... view full answer...
The bulb type that the Pacer Performance Hi-Five Truck Cab Light Kit - Chevy/GM # PP20-240 uses is a 194 style. Which for a standard incandescent in that style you'd just need the # A194B.
If you wanted to convert to LEDs you'd just need the part # ARC88FR. view full answer...
The basic installation instructions for the Clearance Light Kit, # CB-15AK, are as follows: First disconnect the battery. Next, determine where you want to position each light on the roof of the truck. Then, remove the lens from the base on each light. Use the included gasket as a template to mark the center of the two largest holes for the mounting screws and the third center hole for the wiring.
In the vehicle, loosen the headliner for easier access. On the roof, drill holes that were... view full answer...
The manufacturer did not make a wiring diagram, so one does not exist for the Clearance Light Kit - Teardrop Shape - Amber # CB-15AK, though here are the instructions were given:
First disconnect the battery. Next, determine where you want to position each light on the roof of the truck. Then, remove the lens from the base on each light. Use the included gasket as a template to mark the center of the two largest holes for the mounting screws and the third center hole for the wiring.
In... view full answer...
The Pacer Performance Hi-Five LED Truck Cab Light Kit part # PP20-247S aren't exact OEM replacement cab lights. They are simply styled to resemble the Dodge OEM cab lights for the range of years listed. You'll need to use the light as a template and drill out new mounting holes in order to install them.
We do not offer replacement factory cab light lenses unfortunately. view full answer...
The Pacer Performance Clearance Lights # PP20-246S are styled off of the clearance lights found on 2003 to 2014 Dodge Rams. These will fit your truck but the lenses aren't going to match perfectly so you'll have to swap the entire assemblies. view full answer...
The Clearance Light Kit # CB-15AK is a universal roof light kit that could be made to fit a 2015 Ford F-150. It would require a custom install though since the roof of this vehicle is not setup from the factory for lights like this. view full answer...
The correct smoke lens Pacer Performance Hi-Five LED Truck Cab Light Kit for your 2004 Dodge Ram 2500 is the Kit # PP20-247S. If you check out the attached installation video and instructions you can see what all the installation entails. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Lights # PP20-265 that you referenced is an exact fit for your 2008 GMC Sierra. This kit was designed to fit GM trucks that are of the generation from years 2007 to 2014 like yours so this will fit perfectly. view full answer...
If you are looking to fabricate up some roof lamps on your 1980 Ford F-250 I think your best option that we carry would be the Clearance Light Kit # CB-15AK that you referenced. This is a universal kit that comes with everything you would need to install onto your vehicle.
view full answer...
I reached out to my contact at Optronics and they confirmed that the Clearance Light Kit # CB-15AK is self-grounding. There is a screw inside of the housing that grounds the lamp. This product will also work with the 2017 Ram 2500.
view full answer...
We have a variety of roof mounted cab lights for your 1985 Custom Deluxe. Although there are many different types, the majority of them will have the same installation method/instructions. The Clearance Light Kit part # CB-15AK has everything you will need to install cab lights on your truck.
The first thing you will want to do is disconnect your vehicle's battery. You will then want to use the cab lights to mark out the position on the roof where you want the lights to sit. After this... view full answer...
Yes, we currently offer several options that fit different makes:
Dodge - # PP20-245C
Dodge - # PP20-246C
Ford - # PP20-235C
Chevy/GM - # PP20-220C
view full answer...
When you install the Universal TearDrop LED kit part # PP20-205 the recommended method is to use the base of the lights as templates for drilling so that you get the exact right location. This is preferred over measuring for the holes as sometimes the curve in a vehicle roof can make the measurement to get exact.
The overall dimensions of each light is 4-5/8" long x 2-1/16" wide x 1-3/4" tall. view full answer...
For your 1999 Dodge Ram 2500 the part # PP20-245C is a clear cab light that fits that uses incandescent bulbs that are replaceable.
The bulb type this uses is a 194 bulb. view full answer...
I do have a way for you determine if the Pacer Performance Hi-Five LED Truck Cab Lights part # PP20-206 will retain the same factory mounting holes as the cab lights on your 1991 Chevy C/K Series Pick-up but they are not specifically designed to do so.
In order to determine if they will mount in the same location as the factory holes you will need to confirm that the first and last mounting holes on the roof of your vehicle are 3" apart on center. If your factory cab lights mounting... view full answer...
The Clearance Light Kit # CB-15AK are a little different the the OEM lights for your 1992 Ford F-150 Custom. The OEM lights have mounting holes on the sides of the lights while the # CB-15AK will mount through the base of the light. The mounting holes are 3" apart center to center and run the directly down the middle of the light. If you wanted to replace the incandescent bulbs included in these clearance lights with LEDs you would want to use the 194 LED Bulbs # DI78VR.
view full answer...
For the Pacer Performance Hi-Five Truck Cab Light Set # PP20-105 replacement lenses are not available. I called my contact at Pacer to confirm.
I also checked on the similar Optronics Amber Teardrop Light Set # CB-15AK but it too does NOT have replacement lenses available. view full answer...
Yes the Pacer Performance Cab Lights part # PP20-250 fit exactly to the roof of your 2006 Chevy Silverado so it will be an easy install and won't require drilling. view full answer...
The dimensions listed for the Pacer Teardrop Roof Lights part # PP20-236C of 4" long x 3" wide x 1-3/4" tall are the exact dimensions. If you check out the review video link I attached you can see our demo guy measure them as well. view full answer...
The lights in light kit # CB-15AK measure approximately 5-1/2 inches long, 2-3/8 inches wide (at the widest point), and 1-5/8 inches tall at the tallest point. I have included a dimensional drawing for you. view full answer...
The Pacer Performance Hi-Five Truck Cab Light Kit - Dodge part # PP20-245 are not a direct fit replacement for factory cab lights. They are designed to mimic the shape of the factory cab lights but the mounting hole centers could be different. It is instructed to use the base of the light as a template for drilling. So long as you seal up any unused holes there should be no issue. view full answer...
The Pacer Performance Hi-Five Truck Cab Light Kit - Chevy/GM - 3 Piece - White Bulbs - Amber Lens # PP20-240 was designed to fix 2002-2006 models, that being said it's always best to check your 2004 Chevy Silverado's factory mounting holes to ensure a proper fit. I went to our warehouse and measured the holes for these lights and drew up a diagram for you below. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Lights part # PP20-247C are universal cab lights that are designed to work on a variety of vehicles. The style and design of the lights are similar to the factory Dodge cab lights.
Each light requires three holes to be drilled if you do not already have cab lights. There are two mounting holes and one hole for the wires. The kit comes with a template that makes tracing and drilling the holes relatively easy. Once the mounting holes are drilled... view full answer...
The Pacer Performance Hi-Five LED Truck Cab Lights part # PP20-247 are a universal fit item and will work with most factory roofs. Therefore, yes these will fit on the roof of your 2017 Dodge Ram unless you already have factory cab lights. In order to install these cab lights you will have to drill through the roof of your vehicle and run the new wires to either the factory lighting circuit or to an independent toggle switch, which is included.
The style of the cab lights are designed... view full answer...
The teardrop roof cab light kit part # CB-15AK is a universal fit application that would fit your 2005 Ford F-250. The kit comes with everything needed to install and wire up including switches. view full answer...
I'd be difficult to quantify 'how dark' the lenses are. I did a Google search of the lamps, and saw that many of the photos show the lamps being photographed in direct light, which will make the lenses look lighter. Ours were photographed using indirect light, which gives a truer representation of the actual color. If I had to verbally categorize the color, I'd call it a deep red. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Light kit # PP20-221 includes flexible black rubber light bases that are designed to conform and seal properly to flat or curved vehicle surfaces. This kit offers a universal fit on a wide range of trucks; they are styled to look like the factory lights on 1988-2002 Chevy/GM trucks.
Please refer to the linked video to see more on this light kit. view full answer...
I contacted CIPA and they confirmed that the EVO Formance Multi-Use LED Light Kit # CM93166 can be used with 12 volt AC or DC power. However, 120 VAC will be too much for the light causing it to burn out. view full answer...
You can order a replacement bulb. The 194 LED Bulbs - 360 Degree - Wedge Base - 600 Lumens - White - Qty 2, part # ARC68FR, can replace the bulbs in your Pacer Performance Hi-Five LED Truck Cab Light Kit - Ford - 5 Piece - Amber LEDs - Amber Lens, part # PP20-236.
I have included a product description link and a video review link below. view full answer...
The CIPA EVO Formance Multi-Use LED Light Kit - Waterproof - 5-mm Bulbs come only in white # CM93166.
We do have the Vision X Tantrum Strobe Light Kit w/ Remote Control - LED - Multicolor # HIL-STM which will give you 8 LED's in green, red, and blue. These lights can be set to shine solid, flash in sequence, or flash in tandem with music beat. view full answer...
The Pacer Performance Hi-Five LED Truck Cab Light Kit # PP23VR isn't showing as a fit with our fitguide because they're a universal fit and not a specific fit, but I can tell you these will definitely work with your 2022 Chevy Silverado 2500 because I personally watched Brad complete the install for the video you referenced.
The relay Brad uses to isolate the clearance lights in the event of an issue is the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400.
Make sure... view full answer...
Go To Results