Filter Questions and Answers:

reset filter
Air Intakes
Air Intakes
 

Expert Answers about Air Intakes


  • Compatibility and Fit of Airaid Cold Air Intake System for 2014 Jeep Grand Cherokee
  • For your 2014 Jeep Grand Cherokee the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter - Stage 1 - Open # AR311-212 is a fit for the 3.6L and 5.7L models but not the 6.4L models. I confirmed this with the manufacturer and will update our fit guide. As long as you have the 3.6L or 5.7L this will work well for you. This is a fit for 2011-2018 model years with those engine sizes. This system will give you increases of up to 16 horsepower and up to 14 ft lbs torque.
    view full answer...

  • Purpose of Pre-Oiled Filter on Edge Jammer Cold Air Intake # EP28248
  • The Edge Jammer Cold Air Intake # EP28248 referenced in your question does feature a pre-oiled filter which means that oil has been applied to the cones that run down the filter. This allows the filter to catch more contaminants than a standard dry filter and will generally last longer but it will require some upkeep such as removing it every so often to clean it and reapply oil. I recommend using the Cleaning Kit # EP98800 for this purpose.
    view full answer...

  • What is Needed to Increase Torque and Horsepower on a 2003 Ford F250 Super Duty Crew Cab 5.4L
  • The first thing that will increase your torque and horsepower is a cold air intake system like the Airaid # AR401-114. These don't have a specified amount of increase in those areas for your 2003 Ford F-250 but it is the thing to add. This will need to be cleaned periodically with the solution # AR790-554 and we also have replacement filters # AR701-445 if you ever need to replace yours. The next thing you can add to boost your torque and horsepower is a performance tuner. I recommend...
    view full answer...

  • Air Filter Recommendation for 1998 Ford Econoline Van with 4.2 liter V6
  • We have replacement air filters for your 1998 Ford Econoline with a 4.2 liter like the Airair SynthaFlow part # AR860-345 which will allow the engine to breath a bit easier but we do not have any cold-air intakes.
    view full answer...

  • Will the Airaid Jr. Upgrade Kit # AR201-711 Void the Warranty on a 2018 GMC Sierra 1500
  • Unless the Airaid Jr. Upgrade Kit # AR201-711 is the direct result of damage to your 2018 GMC Sierra 1500 it will not void the warranty. Your vehicle actually is protected under the Federal Magnuson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually caused the prob­lem in question. You may want to put the stock air filter...
    view full answer...

  • How Much Horsepower Gain from the Airaid MXP Cold Air Intake System on a 2017 Ram 1500 with 5.7L V8
  • The Airaid MXP Cold Air Intake System part # AR300-277 which is a fit for your 2017 Ram 1500 with the 5.7L V8 engine has not yet been dyno tested by the manufacturer so exact figures cannot be provided but I can say that similar systems for your vehicle claim an increase in horsepower around 18 HP. I also recommend using the Cleaning and Oiling Kit part # AR790-550 every 30,000 to 50,000 miles to keep the system operating at peak performance. The kit is extremely easy to install and...
    view full answer...

  • Cold Air Intake for a 2018 Ram 1500 with 3.6 Liter Motor
  • For your 2018 Ram 1500 with the 3.6 liter motor you can use Airaid MXP cold air intake # AR301-283, # AR302-283, or # AR303-283 for a dry filter or # AR300-283 for an oiled filter. The difference between the dry filter options is just the color.
    view full answer...

  • Parts Needed to Increase Towing Performance on a 2013 Ford Explorer
  • There are a few things that you can do to help out your 2013 Ford Explorer for when you are towing. You can add an air intake system, a tuner, and also an aftermarket transmission cooler to get the most out of your Explorer. I do recommend getting your check engine light taken care of though as that is something you don't want on, especially when towing. The best intake system that we have is the Airaid MXP Cold Air Intake System # AR400-260 which feature an oiled filter for superior...
    view full answer...

  • Probable Performance Gains from Aftermarket Cold Air Intake
  • You ask a very reasonable question. The makers of performance-enhancing products like programmers and cold air intakes (CAIs) base their estimated performance gains on ideal best-case circumstances. In other words, they presume that the vehicle is in top shape and has no deteriorated sub-systems that would limit the gains, such as fouled plugs or a dirty fuel system. For instance, a tuner claimed to offer "up to 100 additional horsepower" that is installed in a vehicle with very worn...
    view full answer...

  • Recommended Performance Upgrades for a 2011 Ford F-250 with 6.2L V8 Engine
  • For the average consumer looking to add both horsepower and torque to their vehicle, I recommend starting out with a cold air intake system. A cold air intake system will increase power, improve gas mileage, and promote engine longevity. It is one of the easiest modifications to make to your vehicle and is also one of the least expensive. For this I recommend using the Airaid CAD Cold Air Intake System part # AR400-273. The next system I recommend upgrading is the ECU. This can be done...
    view full answer...

  • Cold Air Intake Recommendation for 2007 Chevy Corvette
  • We have a cold air intake that fits your 2007 Chevy Corvette, but the kit you referenced actually is for Ford trucks and is not a fit. Instead you'd want the Airaid kit part # AR252-218 which is a confirmed fit and will work well. I attached an install video and picture for you to check out as well.
    view full answer...

  • Will a Cold Air Intake Require Tuning on a 2004 Chevrolet Silverado with 6.6L V8 Diesel Engine
  • The Airaid CAD Cold Air Intake System part # AR203-154 will not require adjustments to the vehicle's engine control unit (ECU) for installation. The above air intake system is a direct bolt on kit with everything needed for installation. As long as the 8th digit in your VIN is a "2", then this system is a direct fit for your 2004 Chevrolet Silverado with 6.6L V8 diesel engine. The Airaid CAD Cold Air Intake System is made right here in the U.S.A. and comes with a lifetime warranty. Don't...
    view full answer...

  • How Often Must the Filter be Cleaned on the Airaid Classic Cold Air Intake System
  • According to Airaid, the Airaid Classic Cold Air Intake System part # AR200-104 for your 1995 GMC C/K Series Pickup will need to be cleaned every 30,000 to 50,000 miles with the Cleaning and Oiling Kit for Airaid SynthaFlow Air Filters part # AR790-550. I also recommend using the filter cover part # AR799-420 to protect the air filter from dirt and water as this will help extend the life of your filter.
    view full answer...

  • Pre-Filter Needed for the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter # AR402-101
  • The pre-filter for the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter # AR402-101 is found on our site with part # AR799-478. You may also be interested in the Cleaning Solution # AR790-554 and the Airaid SynthaMax Universal Replacement Premium Air Filter # AR722-478 for in the future.
    view full answer...

  • Recommended Cold Air Intake for a 2017 Ford F-150
  • For your 2017 Ford F-150 with the 5.0L coyote engine, I recommend taking a look at the Airaid MXP Cold Air Intake System part # AR401-293. The Airaid intake improves airflow to the engine which results in a power increase up to 19 HP and 26 TQ. The enclosed air box blocks out heat from the engine to maximize cold air draw. In addition to improved airflow, the dry 2-layer filter works to prevent 99.6% of contaminants from entering the engine. The intake easily installs using the factory...
    view full answer...

  • Will Installing a Cold Air Intake System Void Warranty Coverage on a 2017 Toyota 4Runner?
  • Installing the Airaid MXP Cold Air Intake System with SynthaMax Dry Filter - Stage 2 - Fully Enclosed # AR511-302 on your 2017 Toyota 4 Runner will not void your manufacturer warranty. When you install an aftermarket part on your vehicle like this, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I am not aware of any way that a cold air intake could cause direct...
    view full answer...

  • Recommended Cold Air Intake for 2004.5 Chevrolet Silverado 6.6 Turbo Diesel
  • The Edge Jammer Cold Air Intake with Dry Air Filter # EP28132-D is a confirmed fit for both the LLY and the LB7 and is designed for models built before the mid-year update. After the mid year update, like your 2004.5 Silverado 6.6 Diesel they recommend using the Edge Jammer Cold Air Intake with Dry Air Filter # EP28135-D. I reached out to my tech contact at edge because you have upgraded to the LBZ, and they confirmed that the # EP28135-D will work with that mouthpiece for your application....
    view full answer...

  • Best Way To Increase Horsepower And Torque In A 2017 GMC Sierra 5.3L V8
  • The best way to not only maximize but increase horsepower and torque on your 2017 GMC Sierra 5.3L V8 would involve installing a cold air intake, performance exhaust system, in addition to a performance chip tuner. Using these components will allow your engine to breath better and perform at it's peak output which will increase not only power but also fuel efficiency. For a cold air intake compatible with your vehicle, I recommend using the Airaid MXP Cold Air Intake System part # AR200-285...
    view full answer...

  • Will The Edge Jammer Cold Air Intake Work With An Exhaust Brake On A Dodge 5.9L Cummins Engine
  • The Edge Jammer Cold Air Intake with Pre-Oiled Air Filter part # EP38225 is designed to fit a 1994-2002 Dodge Ram with the 5.9l turbocharged diesel engine. As the Banks exhaust brake works to compress the exhaust gasses (hot side) not the intake flow (cold side), it should have no compatibility issues with the Edge cold air intake as long as your turbocharger remains in the factory location. Therefore, yes, the Edge cold air intake will work with the Banks exhaust brake. This is a great...
    view full answer...

  • Best Cold Air Intake On A 2017 Chevrolet Silverado 1500
  • I have the perfect option available for you. Foreign contaminates are a serious concern when weighing the pros and cons of a cold air intake system. As many aftermarket cold air intake systems are relatively open, they do not offer near as much protection from the elements in comparison to factory air boxes. However, element containment factors were strongly taken into consideration with the Airaid MXP Cold Air Intake System part # AR200-285 as the majority of the air filter is surrounded...
    view full answer...

  • Is Airaid Cold Air Intake for a 2016 Ford F-150 with 3.5 Liter EcoBoost # AR400-338 CARB Compliant
  • Airaid cold air intake # AR400-338 is CARB compliant for your 2016 Ford F-150 with the 3.5 liter EcoBoost motor. I have linked the instructions where it states this. It will come with the CARB number which for this model is D-609-17.
    view full answer...

  • Compatibility and California Legality of the AIRAID 201-233 Cold Air System
  • According to the manufacturer, the Air Aid Cold Intake System, # AR201-233, is the correct fit for a 2009 Chevrolet Silverado with the 5.3L engine and the unit is legal in all states. However, the Air Aide Cold Air System, # AR201-235, is not a confirmed fit for the 5.3L engine and will not work for your application.
    view full answer...

  • Is Airaid Cold Air Intake Compatible with California's CARB Emissions Standards
  • Yes. I checked with Airaid and cold air intake # AR201-235 for the 2009 Chevy Silverado is street legal in all US states. So the CARB standards won't affect this particular part or its use. Cold air intake makes the engine more efficient so it makes sense that CARB would not be a factor!
    view full answer...

  • Horsepower Increase From Installing the afe Intake Tube # AFE54-10469
  • You'll see anywhere from 5 to 10 horsepower if you install the Intake Elbow part # AFE54-10469 as it smooths out the intake tube to the manifold of the vehicle. Torque gains are going to be about the same.
    view full answer...

  • Recommended Cold Air Intake For 2017 GMC Sierra 1500
  • The Airaid Jr. Upgrade Kit for Factory Cold Air Intake - SynthaMax Dry Filter, # AR201-711, is not a direct fit for your 2017 GMC Sierra 1500 with 6.2 L V8. It has provisions for one crank case breather on one of the valve covers and not 2 like you see on the 2017 model, one on each side. However, if you add another breather tube, you can make this system work. This will upgrade your factory intake while maintaining the air box and location but replacing the intake tube and air filter....
    view full answer...

  • Cold Air Intake with Dry Filter for a 2017 Ram 1500 with 5.7 Liter Hemi
  • Yes, for a Stage 2 cold air intake that has a dry filter and fits your 2017 Ram 1500 with the 5.7 liter Hemi you can use # AR301-277. I have included a link to a video review of this system for you.
    view full answer...

  • Is the Edge Jammer Cold Air Intake EP28248 Legal For Use in California
  • Yes, the Edge Jammer Cold Air Intake part # EP28248 that you referenced is legal for use in the stage of California.
    view full answer...

  • Can a Programmer and Cold Air Intake be Used at the Same Time on a 2013 Ford F-150 5.0L
  • Yes, you can use both cold air intake # AR402-299 and Flashpaq programmer # SU1845 together at the same time on your 2013 Ford F-150 with 5.0 liter motor. The intake has an estimated gain of up to 17 horsepower and the programmer up to 24.4 horsepower. But these figures don't stack meaning that using both doesn't necessarily mean that you will see a gain of 31.4 horsepower. It will likely be slightly less. For a programmer with a larger display and comparable power gains you can use...
    view full answer...

  • Difference Between Stage 1 and 2 Airaid Cold Air Intakes
  • A stage 1 cold air intake will replace the filter and can also replace the box its mounted in. A stage 2 system such as # AR401-299 replaces all of that and has additional equipment, usually a larger diameter hose or collar. The higher the stage number the better the air flow.
    view full answer...

  • Impact on Fuel Economy From Installing Airaid CAD Cold Air Intake on 2010 Cadillac SRX
  • A cold air intake helps the engine breather better, helping it run more efficiently, which can have a modest effect on your gas mileage. In the best case scenario, you'd realize about a 1-2 mpg increase going with a cold air intake system like the Airaid # AR251-261. The actual increases you realize are contingent on many factors like the overall mechanical condition of the vehicle, your driving habits, the ambient temperature, the altitude and on and on. A cold air intake is the only...
    view full answer...

  • Is the Airaid AR523-284 a Cold Open Air or Closed Air Intake System
  • The Airaid # AR523-284 you were looking at for your 2013 Nissan Armada is actually an open air system, because the unit is not fully encased. The main advantage that the open box systems have over the enclosed box system is that open systems offer the maximum amount of airflow. The enclosed box systems will still have plenty of air flow, just not as much as an open box system. The closed air systems will look like the picture I have linked to this page for your convenience. Another...
    view full answer...

  • Where to Install Mass Airflow Sensor on Airaid CAD Cold Air Intake System # AR201-145
  • The mass airflow sensor (MAS) on your 2003 Chevrolet Silverado 5.3L V8 will install on the Airaid CAD Cold Air Intake System # AR201-145 at the sensor mounting pad on the intake tube. These are not shown in the photos on the product page but I linked an image from the instructions that will help. The written installation instructions are linked for you. The replacement filter element for this CAI system is part # AR701-469.
    view full answer...

  • What Power and Torque Gains with Airaid CAD Cold Air Intake System AR350-210 on 2014 Charger
  • The Airaid CAD Cold Air Intake System # AR350-210 is a confirmed fit for the 2014 Dodge Charger with either the 3.6L V6, the 5.7L V8 or the 6.4L V8 engine. This part can deliver up to 12 more horsepower and up to 20-ft-lbs of additional torque according to Airaid. The actual net gains in power and torque are dependent on many factors, including which engine the car has, any other performance equipment on the car and it's general condition. My contact at Airaid did confirm that the...
    view full answer...

  • Cold Air Intake Recommendation for a 2015 Jeep Wrangler Unlimited
  • Sounds like you are wondering if one of those electric superchargers can be installed in the intake tube of a AirAid MXP Cold Air kit part # AR310-132 for your 2015 Jeep Wrangler Unlimited. To be perfectly honest, don't waste your money on an electric supercharger/intake propeller. They don't work and are just a gimmick. They just don't flow enough CFM to make a difference. At wide open throttle they actually reduce air flow since they can't keep up. They basically end up in the way. A...
    view full answer...

  • Do Headers have to be Installed to Add Cold Air Intake on a 2006 Chevy Silverado with 6.0 Liter
  • When upgraded parts people will usually upgrade headers along with adding cold air intake but you do not have to upgrade headers to be able to install just cold air intake. So in other words you can install just cold air intake # AR200-247 if you want. This particular model will fit your 2006 Chevy Silverado with 6.0 liter motor as long as it has a belt-driven radiator fan. For models with electric fans use # AR200-251. The filter will need to be cleaned periodically so I recommend...
    view full answer...

  • Torque and Horsepower Gains with Airaid Cold Air Intake on a 2014 Ford F-150 with EcoBoost V6
  • Apparently the model they used to test the Airaid cold air intake # AR401-101 did not produce as much power as your 2014 F-150 with EcoBoost motor. I do know that Ford has been known to measure for horsepower and torque at the crank rather than the rear wheels so that could also be why there is a discrepancy. Airaid claims up to 26 additional horsepower and up to 40 additional feet pounds of torque regardless of the baseline HP and torque values.
    view full answer...

  • Are Airaid Cold Air Intake System CARB Compliant on 2012 Dodge Ram 1500 5.7L
  • The Airaid Stage 1 and 2 with oiled or dry filters we offer for your 2015 Ram 1500 (see provided link) are all 50 state street legal, per my contact at Airaid. The stage 1 systems offer HP increases up to 8, while stage 2 offers HP increases up to 18. Dry filters are best for off road or dusty conditions, while oiled filters are best for use on paved roads in non-dusty conditions. Stage 1 oiled, part # AR300-236 Stage 1 dry , part # AR301-236 Stage 2 oiled, part # AR300-237 Stage...
    view full answer...

  • What is the Difference Between Stage 1 and Stage 2 Cold Air Intake for a 2012 Ram 2500
  • A stage 1 cold air intake will replace the filter and can also replace the box its mounted in. A stage 2 system such as # AR300-237 replaces all of that and has additional equipment, usually a larger diameter hose or collar. The higher the stage number the better the air flow. I have included a link to the cold air intake options for your 2012 Ram 2500.
    view full answer...

  • Will Adding Cold Air Intake Increase Gas Mileage on a 2004 Toyota Tundra 4.7 V8
  • Cold air intake such as # AR511-163 can indeed help with better gas mileage. Better airflow makes the motor more efficient. You wouldn't notice on a single tank of gas but over time you should notice a little bit of an increase.
    view full answer...

  • Horsepower and Torque Gain w/ Airaid MXP Cold Air Intake System # AR200-285 on 2015 GMC Sierra 1500
  • I spoke with my contact at Airaid and when using the MXP Cold Air Intake System with SynthaFlow Oiled Filter, # AR200-285, on 2015 GMC Sierra 1500, the Dyno testing, which reports at the rear wheels, shows a gain of 24 horsepower and 22 ft lbs of torque.
    view full answer...

  • Fit of Airaid # AR201-796 Cold Air Intake on 2010 Chevy Silverado 2500HD w/ 6.0L Engine
  • Your 2010 Silverado did indeed come with a factory cold air intake. The Airaid # AR201-796 works with your existing box, and comes with the Dry 2-layer performance air filter and intake tube. The tube is specifically designed to allow the maximum amount of airflow into the engine. The # AR201-796 is a confirmed fit for your 2010 Silverado. I've linked you to the installation instructions as well as to a product description video that you might find helpful.
    view full answer...

  • Would the Airaid MXP Cold Air Intake # AR401-278 Cause a Check Engine Light for 2012 Ford F350
  • If the Airaid MXP Cold Air Intake System # AR401-278 were to cause a check engine light to turn on it would have to be installed improperly and it would happen immediately, not 1,200 miles down the road. Without knowing what code your truck popped it would be hard for me to speculate what the real problem is, but as long as you installed the # AR401-278 properly and plugged in all of the sensors it should not cause a vehicle to throw any codes. I would suspect the problem is elsewhere...
    view full answer...

  • Is the Airaid Air Intake # AR521-188 CARB Compliant
  • Yes, the Airaid Air Intakes # AR521-188 that you referenced is approved for use in California and is CARB certified. For more information on this check out the installation instructions that I attached to the right.
    view full answer...

  • Fit of Airaid Jr. # AR201-796 Factory Cold Air Intake Upgrade Kit for 2012 Silverado 2500 6.0L
  • The Airaid # AR201-796 cold-air intake kit you referenced is indeed a fit for the 2012 Chevy Silverado 2500 HD with the 6L engine. I have confirmed this with Airaid. To see the installation instructions, as well as a product demonstration video, click the provided link.
    view full answer...

  • Will Adding Cold Air Intake Increase Gas Mileage on a Ford F-250 XLT V10
  • Adding cold air intake # AR403-114 will help an engine to run more efficiently. But if that was the only thing you changed you probably wouldn't notice a difference in gas mileage on a single tank. It might take several months to see an improvement in mileage. Driving habits will have more of an effect on mileage. Other factors such as the condition of the vehicle, terrain, altitude will also have an effect on the mileage.
    view full answer...

  • Cold Air Intake with Oiled or Dry Filter for 1998 5.2 V8 Dodge Durango
  • Which system is better will really depend on you. If you're a 'Type A' person who's pretty much on top of things all the time, I'd recommend the Oil-Based Filter model, part # AR300-107 because the 5-layer filter provides better filtration than the # AR301-107 dry filter model, especially if you regularly operate your vehicle in dusty areas. This system does require some maintenance, it will need to be cleaned and re-oiled occasionally. A cleaning and oiling kit is available as part...
    view full answer...

  • The Best Cold Air Intake for a 2010 Ford F-150 with 4.6 Liter, 2 Valve Motor
  • I spoke with my contact over at Air Raid about intake system # AR400-226. He said that it fits both the 2 valve and 3 valve versions of the 4.6 liter engine in the 2010 Ford F-150. So you will be good to go! To keep the filter oiled and clean you can use kit # AR790-551. And if you ever need to replace the filter use # AR721-473.
    view full answer...

  • Cold Air Intake Recommendation for a 2006 Jeep Grand Cherokee
  • Yes, I checked with Airaid and the Airaid CAD Cold Air Intake System with SynthaMax Dry Filter # AR311-205 that you referenced is confirmed to fit your 2006 Jeep Grand Cherokee with a 3.7 liter engine. I attached installation instructions for this product for you to check out also.
    view full answer...

  • Cold Air Intake for a 2010 Ford F-150 4.6 Liter 2-Valve
  • The Airaid CAD Cold Air Intake System # AR401-226 will fit a 2010 Ford F-150 with 4.6L V8 Engine. Since that is what you have this system will work for you. I have also included a link to all of the cold air intakes we carry that will fit your 2010 Ford F-150 with 4.6 liter motor. The intakes will fit both the 2-valve and 3-valve versions of the 4.6.
    view full answer...

  • Troubleshooting a Service Engine Soon Code After an AIRAID Cold Air Kit on a 2013 GMC Sierra
  • It sounds like one of the sensors is not plugged in all the way. Nearly every time a SES code pops right after anything is done to the intake track of a vehicle its because a sensor is not plugged in. I would check any sensors that got unplugged during the install and make sure they are fully seated and then disconnect the negative side of your battery for about 10 minutes to let the codes reset. If the MAF sensor was the problem you would probably experience idling problems, I would...
    view full answer...

  • Engine Showing Error Code After Installing Cold Air Intake
  • According to my research, the most common cause of having that code would be a dirty or improperly installed MAF sensor. Make sure the MAF sensor is fully inserted into the intake tube. Since your system uses an oil-based filter, there might have been too much oil on the filter, which in turn contaminated the sensor. You can pull the sensor from the intake tube, and use an aerosol based electrical contact cleaner on the sensor. A vacuum leak can cause the error code, as well. Make sure...
    view full answer...

  • Will a Cold Air Intake System and an Exhaust System Improve Fuel Economy on a 2001 Dodge Dakota 4.7L
  • A cold air intake like the Airaid CAD Cold Air Intake System, part # AR303-117, is a benefit to the engine because cold air is more dense and therefore is more readily combustible. It will also optimize airflow allowing the engine to breathe easier. A performance exhaust like the MagnaFlow Exhaust System, # MF15611, for club cab models with 63 inch bed or # MF15739 for quad cab models with a 63 inch bed, will also optimize airflow by reducing the back pressure. Both products will...
    view full answer...

  • How Do Cold Air Intakes Affect Fuel Economy
  • A cold air intake like the AFE Direct Fit Cold Air Intake System # AFE51-11052 that you referenced could only help your fuel economy. Most likely it would give you a few more miles per gallon. As long as it is installed correctly it should give you increased fuel mileage and performance. I attached installation instructions for you to check out also. When the filter gets dirty you may also be interested in purchasing AFE Filter Cleaner # AFE90-59999
    view full answer...

  • Is The AFE Air Intake # AFE51-11302 California CARB Legal For 2007 Toyota Yaris
  • No, the AFE Air Intake # AFE51-11302, is not CARB legal in California. I did some research on the internet and I was not able to find a California CARB legal intake for your 2007 Toyota Yaris.
    view full answer...

  • Cold Air Intake Recommendation for a 2008 Honda Ridgeline
  • If you drive your 2008 Honda Ridgeline mostly on paved roads, I would recommend going with the Airaid Cold Air Intake System with Oil-Based Filter, # AR530-202. With the oil-type filter, it is recommended to clean and re-oil every 25,000 to 30,000 miles. Oiled filters allow for the greatest amount of airflow. If you drive on paved and semi-dusty roads, then I recommend going with the Airaid Cold Air Intake System with Dry Filter, # AR531-202. The dry filter has the same maintenance schedule...
    view full answer...