The Bulldog Winch # BDW15105 mounting plate does have mounting holes for a roller or hawse fairlead which are 4.8 inches apart on center. If that doesn't match up with the holes on your existing fairlead, Bulldog does offer some that are compatible. For the hawse fairlead used for synthetic rope, use # BDW20224, or for wire rope/cable, use a roller fairlead, part # BDW20055, both of which are compatible with the hole spacing of the # BDW15105 winch mounting plate.
Bulldog confirms that... view full answer...
The correct custom winch mount kit for your 2017 Honda FourTrax Rancher is part # BDW15114 if it has the independent suspension or part # BDW15181 if it has the solid axle.
With these mounts you can use winches such as # BDW15001 (1-horsepower and rated for 2000-lbs) or # BDW15002 (1.2-horsepower and rated for 3000-lbs). The Superwinch LT2000 winch 1220210 mounts with a 2-bolt pattern spaced apart 3.15-inches; at most you may need a drill a new hole in the mount to use this winch.
The... view full answer...
Yes it will! I can confirm that the correct Bulldog Winch mount for your 1999 Polaris Sportsman 500 ATV is in fact the one you mentioned, the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15102. view full answer...
Your Polaris should be a Sportsman, according to my research, so for a 2001 Polaris Sportsman 500 H.O., you can use the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15157.
For a winch to go with the mount, you can choose from one with a 2,000 lb or 3,000 lb rating:
- 2,000 lbs: Bulldog Winch Powersports Series ATV Winch # BDW15001
- 3,000 lbs: Bulldog Winch Powersports Series ATV Winch # BDW15002 view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15151 works with most winches as it retains the same industry standard mounting pattern. That said, you need to verify the external dimensions with the photo below to ensure compatibility. view full answer...
Yes, the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15151 that you referenced is compatible with Superwinch winches like your Terra45 since it uses an industry standard winch mounting pattern. view full answer...
We have custom fit winch mounts from Bulldog and Superwinch for ATVs but neither manufacturer has a confirmed fit for your 2004 Suzuki King Quad LTF300 FK4.
I recommend the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 and then you can use the Curt Trailer Hitch Electric Winch Mount Plate # C31010 or something similar in that receiver. There won't be a line pull rating that is accurate for a configuration like this, so you will need to use your best... view full answer...
Yes, the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15141 has a universal bolt mounting pattern so a Badland 2000 winch would easily fit on it and work well! view full answer...
Yes, the item you selected, Bulldog ATV Winch Mount, part # BDW15157, is the correct winch mount for your 2001 Polaris DU 500 Sportsman.
You will be able to mount an electric winch like the Superwinch LT2000 Electric Utility Winch, part # 1120210. The Superwinch models that are compatible with the ATV Winch Mount are as follows: X1F, X2F, ATV1800, ATV2300, ATV3000, T1500, T2000 and EX1. view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15122 is designed with multiple different spacings to allow you to mount many different winches. Most commonly we find that the smaller winches like yours utilize a 6 5/8" x 3" bolt pattern on the winch which matches this mounting plate.
On your plate it appears there isn't a lot of wiggle room forward and back to make up that 5/8" difference. With that said if these don't line up exactly you can simply drill out holes... view full answer...
According to Bulldog winch, they are fairly positive that the # BDW15159 would work with your OEM optional bumper, as shown in the diagram I provided. It looks like the mount wold attach so that the bottom of the winch would sit about halfway up the radiator opening, right atop that horizontal bar at the top of the bumper. You'll want to look at the trim pieces alongside the radiator grill to see if the mounting holes shown in the diagram are present. I was unable to see enough in the photo... view full answer...
According to my contact at Superwinch there is no stock mounting kit available to attach your Terra 4500 winch to your Polaris Ranger 800. It will be necessary to either have a custom mount fabricated or to drill new winch mounting holes on the mounting plate (in the 3-inch x 6.66-inch pattern used by the Terra 45).
The Bulldog Winch Custom-Fit UTV Winch Mounting Kit, part # BDW15165, is intended for various years of Polaris Ranger 800 RZR UTVs. It is compatible with the Terra 3500 and... view full answer...
Yes, winch mounting bracket # BDW15190 is a custom fit part designed to fit your 2016 Honda Pioneer 1000-5. We have not yet had the chance to install this part on a Pioneer but as soon as we do we will post the video on the product page. view full answer...
The Bulldog Winch Mount # BDW15114 is confirmed to fit your 2008 Honda TRX 420 and it might work with your Champion Winch. You'll need to measure the bolt pattern on your winch to find out. The Bulldog Winch mount uses either a a 4 bolt pattern of 4.9 inches by 3 inches or a 2 bolt with 3.15 inches spacing. view full answer...
Yes, the Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15135 will fit your 1998 Suzuki Quadrunner LT-F4WD. I have attached a photo which shows the list of ATV's that the mount will fit for you. view full answer...
I reached out to Bulldog Winch about the Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15144 and they were able to provide me with the installation instructions which I have then attached for you. Please take a look over these and let me know if you need any further assistance. If you do not already have the roller fairlead then the correct one for this bracket is the Bulldog Winch ATV Winch Roller Fairlead part # BDW20055.
If you need help wiring your winch as well I would... view full answer...
The winch mounting brackets for the 2016 Honda Pioneer 500 like the Bulldog Winch part # BDW15183 are designed to have the winch mounted to the underside of the bracket. view full answer...
BullDog Winch ATV winch mount # BDW15135 is listed as a fit for your 1994 Suzuki LT. The mount has numerous mounting holes so fitting your Warn winch on it should not be a problem. Many winches have the same mounting pattern. view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15156 has the standard mounting location dimensions of 10" x 4-1/2" or the four corner mounting holes. I spoke with my contact at Bulldog Winch who said that unless you are using a bigger winch like the Warn 16.5 you should be good to go as it is more like an industry standard.
Unfortunately we do not carry the Warn 4000 winch but we do have the Bulldog Winch Off-Road Winch # BDW10045 which has these same mounting hole patterns,... view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15107 along with the roller fairlead # BDW20055 or hawse fairlead # BDW20224 are a confirmed fit for your 04 Honda Rancher. The mounting plate will be compatible with the Superwinch models as they use standard mounting locations. view full answer...
For your 2014 Yamaha Grizzly 450 the correct Superwinch mounting plate is part # BDW15112. This is shown on the linked page among all products for the Grizzly.
This mount will allow you to install a Terra winch such as the Terra 3500, part # SW1135220, or the Terra 2500, part # SW1125230. Since the mount is a custom-fit item made especially to fit your Grizzly you should not have any issues. Mounting holes for the winch and fairlead are already on the plate for installation.
You are... view full answer...
I went out into our warehouse to grab one of the Bulldog Custom-Fit Steel Winch Mounts # BDW15141 we have in stock to measure the hole spacings.
I attached a picture that has all of the dimensions. All of the measurements were taken from center to center. view full answer...
Yes, the Superwinch LT3000ATV Winch, # SW1130220, will fit the Bulldog Winch Custom-Fit Steel Winch Mount for Kawasaki Mule, # BDW15184.
Both the Bulldog mounting brackets and Superwinch LT3000 winch will mount to your 2015 Kawasaki Mule Pro-FXT.
view full answer...
The correct Bulldog Winch Custom-Fit Steel ATV Winch Mount for a 2017 Honda FourTrax Rancher 420 is part # BDW15181. The Bulldog Winch Custom-Fit Steel ATV Winch Mount will work with the Superwinch LT4000 ATV Winch part # SW1140220 as well. view full answer...
The winch mount part # BDW15102 that you referenced is a confirmed fit for your 1999 Polaris 500 Sportsman. It was designed to fit Superwinch brand winches but since most winch manufacturers make their mounts to the same basic dimensions we have found that most winches will fit the Superwinch mounts. view full answer...
The Bulldog Winch winch mount, part # BDW15147, is a fit for your 1999 Arctic Cat 500. I can't confirm for sure that it fits the Traveler winch but it most likely will. view full answer...
The winch mount you will need for your Polaris 400 Explorer is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15157. This custom fit mount will give you a perfect fit and then you simply need to add the winch of your choice. I recommend the Bulldog Winch - 2,000 lbs # BDW15001 which is the most popular option for your particular vehicle. This winch comes with the rocker switch that is handlebar mounted for convenience. I've attached a video of this product to show the attributes... view full answer...
For your 2004 Polaris 500 Sportsman HO with the Superwinch Winch LT3000, I recommend the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15159. This is a custom-fit part designed for your ATV frame. It will be compatible with many winch brand options, so if you haven't yet purchased a winch I recommend the Bulldog Winch Powersports Series ATV Winch - Wire Rope - Roller Fairlead - 3,000 lbs # BDW15002 which is very comparable and is very popular with our customers. I've attached a... view full answer...
The winch you referenced, Superwinch Terra Series ATV Winch # SW1145220, has a 4-bolt mounting pattern for the winch that measures 3- x 6.66-inches on the hole centers. This hole pattern is compatible with the Bulldog Custom-Fit Steel ATV Winch Mount # BDW15113. view full answer...
We do have a winch mount for your 2007 Yamaha Wolverine 450 4x4. It is # BDW15140.
We do not have a hitch mount for your Wolverine though. view full answer...
Custom-Fit ATV Winch Mounting Kit, part # BDW15148, is made to provide a custom fit specifically for your 2002 Arctic Cat 375, but it is intended to provide a mounting surface for one of six different winches made by Superwinch. Those winch models are listed on the product page for the mounting kit.
All of the winch mounting brackets we offer are designed for the standard electric winch mounting that will work with most winches.
I researched images of Badlands winches in order... view full answer...
Yes, the Bulldog ATV Winch Custom Mounting Kit, item # BDW15157, is designed to fit the 2001 to 2003 Polaris Sportsman 400 4X4 ATV. I have posted a link below to the items that will work with this mount and your ATV. view full answer...
Yes, the Bulldog Winch part # BDW15001 that you referenced is compatible with the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15151 that you referenced. view full answer...
There is a winch mount for your 2018 Polaris Ranger 570 full size, the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15165, which fits 570 Full Size, 570 Mid-Size, and 570 Crew EPS Mid-Size.
As the name of the mount states, this is a custom fit for your Polaris Ranger and will fit a wide variety of Bulldog ATV winches, including the Bulldog Winch Powersports Series - 2,000 lbs # BDW15001, the Bulldog Winch Powersports Series - 3,500 lbs # BDW15005 and the Bulldog Winch Powersports... view full answer...
After consulting Superwinch I can recommend the ATV Mount # BDW15157 you referenced for your 2000 Polaris 500 Sportsman. It is a custom-fit winch mounting plate compatible with your ATV with all mounting brackets, hardware, and instructions included.
To use this mount for your ATV, you may need to mount your roller fairlead to the double-tube bumper or remove the bumper depending on the configuration of the bumper on your Sportsman 500. A co-worker here has a winch mounted on a 2002... view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114 is a custom fit for your Honda Rancher TRX420 for 2007-2014(with independent rear) models. I've attached a video to assist.
Another option is the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15181 which is a fit for the Honda Rancher 420 from 2014-2017 straight axle or 2015-2017 independent rear. This mount fits only the 4-bolt mount winches. I've attached a review video of this product as well.
With either... view full answer...
For your 2014 Kawasaki Teryx4 800LE the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15176 is a custom fit. It uses the basic mounting locations, so it should work with your winch. For instance the Bulldog Winch will have a 4 bolt mounting pattern that is 6-5/8 x 3 inches center to center. view full answer...
The steel hardware components included in the Custom-Fit ATV Winch Mounting Kit, part # BDW15114, in addition to providing a mounting location for the LT2000 winch (part # 1120210), also add enough additional steel material to the mounting area on the front of the Rancher frame to reinforce it adequately for the full 2000 pound line pull rating of this winch.
My contact at Superwinch confirms that this winch mounting kit hardware provides enough reinforcement to the frame to allow use... view full answer...
I reached out to a representative of Bulldog who said the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15176 measured approximately 9 inches wide, 7-1/2 inches deep and 3-3/4 inches high (to the bottom of the mounting plate).
You can use these measurements to determine if this winch will fit over the hitch on your 2016 Teryx. If so you can use this mount for a winch like the 4,000 lbs Powersports Series # BDW15004 or 6,000 lbs Compact Series # BDW15022.
I have added links... view full answer...
The correct winch mount for your 2014 Honda TRX 500 Foreman would be part # BDW15181. You can see current pricing by clicking the provided link. view full answer...
We do have a winch mount that is confirmed as a fit for your 2015 Kawasaki Mule Pro-FXT but it is not the # 2202882. Instead you would need the # BDW15184 which is a confirmed fit.
A very popular winch to use with this is the Superwinch part # SW1130220. view full answer...
The correct winch mount for your 2002 Honda TRX 350 is Bulldog Winch Custom-Fit Mount # BDW15107. The first mount you mentioned was a fit but discontinued by Superwinch. The second was a fit for the Polaris brand frames and not a Honda frame but it too has been discontinued. Rest assured that many winch brands will work with this Bulldog custom winch mount that is a confirmed fit for your Honda TRX 350 frame.
I also linked a FAQ article on how to wire an electric winch. view full answer...
Yes, I checked and they do list mounting kit # BDW15114 as a fit for your 2013 Honda TRX 420. With this mount you can use Superwinch models LT2000 (SW1120210), LT3000 (SW1130220).
The LT2000, # 1120210, is a popular option. I have included a link to a video showing a typical installation for you. view full answer...
For your 2018 Polaris 570 Sportsman the winch mount you want is the Bulldog part # BDW15165. This will work with your Terra winch as well. view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15185 will indeed fit perfectly on your 2018 Yamaha Grizzly 700 EPS.
You can use this to mount the Superwinch Terra Series ATV Winch SW1135220 like you wanted and have a great set up on your ATV. view full answer...
Winch mounting bracket # BDW15148 is designed to fit a 2002 Arctic Cat 500 Manual 4x4 or Automatic 4x4 and Automatic TBX 4x4. We only carry this one bracket for 2002 Arctic Cat 500 models. view full answer...
I have a solution for you, but neither Bulldog or SuperWinch has a confirmed fit for your 2002 Suzuki 300 King Quad. Instead, you can use the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 and then you can use the Curt Trailer Hitch Electric Winch Mount Plate # C31010 (or any other hitch mounted winch plate) in the receiver you've installed.
Going this direction, there won't be a line pull rating that is accurate so you will need to use your best judgment... view full answer...
Yes, the Badlands winch mounting pattern is compatible with the winch plate part # BDW15151 that is also listed as a fit for your 2014 Polaris 400 Sportsman.
I spoke to my contact at Bulldog Winch and he told me that their winch mount that you referenced was designed to fit the standard winch mounting bolt pattern dimensions of 10 inch wide by 4-1/2 inches deep.
He said they know this will work with the more popular brands of winches like Superwinch and Badlands. view full answer...
I went to the warehouse and measured the Bulldog Winch Custom-Fit Steel Winch Mount, part # BDW15151.
The mount measures 8-inches tall, 6-1/4 inches wide, and 5 inches deep. The mounting holes on the bottom bracket are 2-3/4 inches center to center. The mounting holes for the upper bracket measure 2-1/2 inches center to center.
I have attached a couple photos with the dimensions you can check out. view full answer...
If your 2007 Polaris 500 Sportsman is a 4x4 you would need the Bulldog Winch Mount # BDW15159. If you have the 4x4 X2 2-UP this is also the correct mount. If you have the 6x6, then you will instead use the Bulldog Winch Mount # BDW15157 for the custom fit.
For the winch, I recommend the Bulldog Winch Powersports Series ATV Winch - Wire Rope - Roller Fairlead - 3,000 lbs # BDW15002. This is a customer favorite that will give you the power and performance you desire. I've attached... view full answer...
In order to mount your Superwinch Terra 45 on your 2011 Honda Rancher 420, you'd need the # BDW15114 Bulldog Custom Winch Mount.
I've confirmed the fit of the mount to the UTV as well as the fit of the winch to the mount with Bulldog Winch, they confirm that the mount is a fit for your Rancher and that your Terra 45 winch is compatible with the # BDW15114 mount. view full answer...
For a winch mount for your 1999 Polaris Sportsman you would want the Superwinch Mount part # BDW15102 that has been confirmed as a fit for your ATV. This will work well with your Badlands winch as well. view full answer...
For your Kawasaki Mule SX 4x4 we have the Bulldog Custom Winch Mount # BDW15122. This is designed specifically for your UTV and it features a standard bolt pattern that will let you mount your existing Superwinch Terra model winch. view full answer...
I spoke with my contact at Superwinch and he said the Superwinch ATV Winch Custom Mounting Kit, part # BDW15157 will bolt below the bumper on your 2005 Polaris 500 HO. If your brush guard is located above the bumper then it will not interfere with the winch mounting kit.
I have a coworker here who has a Polaris 500 HO with a brush guard and he said that he has a winch on the front of his and it does not interfere with the brush guard. view full answer...
I did some checking and winch mount # BDW15151 does indeed fit your 2017 Polaris Sportsman 570 and the Superwinch LT2500 winch you have. view full answer...
Good news, from my research it appears that the Badlands Winch 61383 has a mounting bolt pattern of 3 inches x 4-7/8 inches which will fit the mounting hole pattern of the Bulldog ATV Winch Mount # BDW15181 you were looking at. The Bulldog ATV winch is confirmed to fit the 2016 Honda Rancher 420.
Since you didn't tell me the specific model you were referring to, you will want to check the bolt hole mounting pattern to be for certain.
I have linked the product to this page for your... view full answer...
The winch plate you would want to install on your 2005 Honda TRX 400 to go along with Superwinch LT3000 that you referenced would be the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15107. view full answer...
I reached out to my contact at Bulldog Winch, and the Bulldog Winch Custom-Fit Steel Winch Mount # BDW15176 will fit on your 2016 Kawasaki Teryx 2 door. view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15159 is compatible with the standard mounting bolt pattern you find on a Runva 3.5P.
You may also be interested in the Bulldog Winch ATV Winch Roller Fairlead - 122.5mm Mount # BDW20055 or the Hawse Fairlead # BDW20224 which will be compatible with this mount. view full answer...
Yes, the Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15135 is a confirmed fit for your 1997 Suzuki LTF250. The mount has several mounting holes to accept a wide variety of standard mount winches. view full answer...
I wish we had a picture of the Custom-Fit ATV Mounting kit part # BDW15141 installed on a 2012 Honda TRX 250 like yours, but we have not had the chance to install this product yet so we do no have access to pictures. I spoke to my contact at Superwinch and all he could tell me was that it will install on the front of your ATV frame and that installation instructions are included with the product. view full answer...
We do offer mount and winch that would work well with your Moose manual lift plow.
I'd recommend the # BDW15102 Bulldog winch mount and the 2000 lb capacity Bulldog winch, part # BDW15001. The winch would also be good for recovery work when the plow isn't attached. view full answer...
Yes, we have the mount you will need to install the Superwinch LT2000 ATV Winch on your 2005 Kawasaki 360 Prairie ATV. You will need to use the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15120 which will fit both the 2x4 and 4x4 models.
view full answer...
Yes, I checked with our contact at Bulldog Winch and the Winch Mounting Kit # BDW15151 will work with your LT2500 Superwinch and will work on your 2012 Polaris 500 HO Sportsman. view full answer...
We do not have a photo of the Superwinch LT2000 mounted on an ATV but I can confirm the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15120 is the correct fit for your vehicle. If this is the plate you have, then the Roller Fairlead # BDW20055 or the Hawse Fairlead # BDW20224 would be a great addition that will change the appearance as well as the function of your Superwinch LT2000. view full answer...
Yes, the Superwinch Custom-Fit ATV Winch Mounting Kit # SW2202920 will work perfectly with the Superwinch Terra 45. I verified this through Superwinch's fit information.
I have attached the written mounting instructions that you can also check out. view full answer...
For your 2014 Kawasaki Mule 4010 we have the Bulldog Winch Mount # BDW15106. This is specifically designed to attach to your ATV and features standard mounting holes compatible with your Superwinch Terra 45. view full answer...
For the 2004 Honda Rubicon 500 TRX you actually want the mount part # BDW15137 which is a confirmed fit. The winch part # SW1125220 would then work well with this mount. view full answer...
For your 2001 Polaris 500 Sportsman 6x6 the correct winch mounting plate you need is the Bulldog part # BDW15157. This is custom fit for your Polaris and has a universal style of winch mounting plate that will work great with a 2,000 lb rated winch. view full answer...
The correct custom fit winch mount for a 2014 Polaris 570 Sportsman is the Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15151 which contains the industry standard winch mounting pattern so it will work just fine with the Badlands 3,500 Lb Winch.
I have attached an install video for you as well. view full answer...
The Bulldog Winch Mount part # BDW15151 is a fit for your 2015 Polaris 325 Sportsman ETX.
This would work well with the part # SW1130220 or the # SW1125220.
That being said Bulldog Winch has told me that their winch mounts work just fine with Superwinch winches. view full answer...
I spoke with my contact and they said the Bulldog Custom-Fit ATV Winch Mounting Kit, part # BDW15140, will fit the 2006 Yamaha Wolverine 450 4x4. It will also fit the 2006 to 2009 Yamaha Wolverine 350 2x4. view full answer...
A tree or stump is not a recommended place to mount a winch. Normally in these situations, people mount the winch on a steel post that is held in the ground with concrete in order to support the weight. You would need to make sure the winch pays out and reels in in a straight line into the winch so it may need to be angled.
A hand winch is the most common type used for this application. something like the Dutton-Lainson winch # DL14881 could work for you. It is a 2-speed brake winch... view full answer...
The correct custom winch mount for your 2011 John Deere Gator JD825i is the Bulldog Winch Mount # BDW15171. This will bolt right onto your John Deere and I verified with Bulldog that it's mounting pattern is directly compatible with the 4-bolt 3" x 6.66" pattern on your Superwinch Terra 45 SW1145220. view full answer...
Bulldog has the mount part # BDW15159 which is a fit for your 2004 Polaris Sportsman 700 4x4 and would work great with the Superwinch Terra Winch.
The Bulldog winch plate part # BDW15159 is also a fit for your Polaris and would work well with the Terra winch but I'd recommend the Superwinch mount for use with your winch since the brands match. Bulldog Winch and Superwinch make their winches to fit the same industry standard winch mounts. view full answer...
We currently have one winch mounting brackets that is designed for your 2018 Kawasaki Mule 410 which is the Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15106. This bracket has pre-drilled mounting holes to accept a Bulldog winch. Although we do not have a winch mounting bracket specially for your Warn winch, you would more than likely be able to use this plate so long as you are willing to drill new holes. view full answer...
The winch mount that we carry to fit your 2011 Can-Am Outlander 800 is the Bulldog Winch # BDW15113.
We also have a 3,000 pound winch, part # BDW15002, that will fit to the mount. view full answer...
I checked with Bulldog winch and the part # BDW15181 has been confirmed as a fit for your 2016 Honda Rancher 420 so it would work well.
This would also fit and work well with the Superwinch LT3000ATV Winch # SW1130220 that you also referenced. This winch does come with a handlebar mounted rocker switch as well. view full answer...
Superwinch has not yet confirmed mount kit fits for the 2017 Polaris 850 Sportsman but we do have a confirmed winch mount fit from Bulldog Winch, their part # BDW15151, which fits the 2017 850 Sportsman XP/HO (including Touring). Other 850 Sportsman versions are not yet confirmed.
You can use this to install Superwinch Terra Series 2500 ATV Winch # SW1125220. view full answer...
I contacted my tech contact at Bulldog Winch and he told me the Custom-Fit Steel Winch Mount # BDW15175 is confirmed to fit on your 2016 590i John Deere Gator XUV. I attached a review video of this winch mount you may want to check out.
If you are in need of a winch, I recommend the Bulldog Winch 1.9 HP Powersports Winch # BDW15022. This winch has a weight capacity of 6,000 lbs. This winch has a permanent magnet motor and uses a 50' wire rope. The handheld remote cable is 15' long and... view full answer...
If you have a 2002 Honda TRX FourTrax 350 you would want Winch Mount # BDW15107. If you have a Honda TRX Fourtrax 450 then you would want Winch Mount # BDW15105 instead.
Either of these winch mounts will work well with a Superwinch T1500. view full answer...
We don't have an install video yet for the part # BDW15131, but I did attach a picture that shows the install instructions. It has a diagram that shows how it bolts to the Grizzly frame as well. view full answer...
The Custom Mounts like the part # BDW15165 are designed to fit the industry standard mounting patterns of winches available from different manufacturers. I have asked similar questions about the fits of other brands of winches on the Superwinch mounts and they said that while the fit was never specifically tested they will say that they don't see any reason it wouldn't fit since nearly all winches are made with similar attachment bolt patterns. view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15114 is the correct mount for a 2010 Honda Rancher 420. It is designed for compatibility with winches of many brands. It is a confirmed fit for your vehicle and worst case scenario you may need to drill new holes for your Champion brand winch in the mount itself but your vehicle fit will be precise. view full answer...
I have a confirmed fit mount and compatible winch for your 2012 Polaris Ranger 500 EFI 4x4. For your mount, I recommend the 2012 Polaris Ranger Bulldog Winch Custom-Fit Steel Winch Mount, # BDW15165. I've attached a video of this install for you.
For the winch that will fit this mount and is suited for your vehicle, I recommend the Bulldog Winch Powersports Series ATV Winch - Wire Rope - Roller Fairlead - 3,000 lbs # BDW15002. This winch has a sealed power unit and has a permanent... view full answer...
For a winch mount that has been confirmed as a fit for your 2006 Polaris Ranger 500 4x4 you'd want the part # BDW15111 which is a confirmed custom fit. view full answer...
The BullDog Winch Mount part # BDW15151 that you referenced has been confirmed as a fit for your 2014 Polaris Sportsman 570.
This mount will also work with your Superwinch LT2500 like the part # SW1130220. view full answer...
The winch mount part # BDW15108 is a fit for your 2015 Can-Am Outlander 450 and is compatible with the Superwinch LT3000 part # SW1130220 that you have. view full answer...
The correct winch mount for your 2005 Polaris Sportsman 800 is the part # BDW15159. I confirmed this fit with Bulldog Winch.
For a winch kit I would recommend the Superwinch Terra 25 part # SW1125220. This winch has a 2,500 lb capacity that has a line speed of 9.5 feet per minute. Check out the review video I attached for more info. view full answer...
To install the Superwinch Terra Series ATV Winch on your 2007 Yamaha Grizzly YFM 660 4x4 you need the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15131 which has been confirmed as a fit for your vehicle. The Superwinch Terra will work with this mount even though they are different brands. view full answer...
For your 2006 Polaris 500 Sportsman the mount part # BDW15159 is a confirmed fit that would work well for you.
We don't carry any brush guards at this time though. view full answer...
For your 2014 Honda TRX 500 Foreman the winch mount you would need is the part # BDW15181.
This mount would also work well with the Superwinch Terra # SW1145220. view full answer...
I do have an alternative solution you may be interested in that will allow you to install a winch on your 2001 Polaris Sportsman 500 HO. You could add a bed extender to your 2010 Toyota Tundra which will allow you to keep the tailgate down for extra space. We have 2 models available for the 2010 Tundra.
First is the Topline Bed Extender, # BX4004-01. This extender is silver and made from aluminum and nylon. We also have this model in black, # BX4004-02.
I did some research on your... view full answer...
I spoke with my contact and he said that ATV Winch Mount, # BDW15157, can be used to mount the Champion model winch that you purchased. Most after market winch companies duplicated Superwinch's mounting design therefore you should have no trouble at all using this Superwinch custom fit mounting kit. view full answer...
For your 2016 Polaris RZR 1000 S the Bulldog Winch mount part # BDW15182 is a confirmed fit. This winch plate will work with a Warn 4000 winch also. view full answer...
The Superwinch LT2000 # 1120210 and winch mount # BDW15114 will both fit a 2012 Honda TRX 420 Recon. I have included instruction and video links for you to view. view full answer...
The Bulldog Winch Custom-Fit Steel Winch Mount, part # BDW15151 is designed to fit both years of your polaris Sportsman 850 ATVs.
The fairlead is not included with this winch mount. For a roller fairlead you can use part # BDW20055 and for a Hawse fairlead you can use part # BDW20224. view full answer...
For a winch mount that fits your 2012 Polaris Ranger XP 800 you'd want the part # BDW15156 then for a plow that fits this that comes with a remote the Bulldog Winch Powersports Series part # BDW15014. view full answer...
Go To Results