Filter Questions and Answers:

reset filter

Expert Answers about optronics


  • Wiring to Flat Tow a 2019 Jeep Wrangler Behind a Motorhome
  • Magnetic tow lights, like part # TL21RK, do their job just fine, are less expensive, and don't require much to setup so they're not a bad option by any means. The only real drawbacks to them is that you need to set them up or take them off each time you change from towing to driving the Jeep. They also have a chance of scratching the Jeep's paint since they're being attached to its surface each time. We often recommend them if you're not going to be towing the vehicle very often or if...
    view full answer...

  • Replacement for Kaper II 1A-S-20 Trailer Lights
  • We do not carry those exact parts, though we do have something with the same dimensions that should work for you. Optronics light # MC32RB is red while # MC32AB is amber. I've added links to video reviews of each light for you to take a look at.
    view full answer...

  • Upgrading Camper Lights to LED and Clearance Lights with Brake and Turn Signal Functions
  • Yes, you can upgrade to LED lights and have a double light set up in the rear with stop, tail, and turn light functions. But what I need to know is if the camper has the brake lights and turn signals on the same bulb or if it has separate amber turn signals. And if the camper does have combined brake and turn signals do you want to keep it that way or do you want to have separate turn signal and brake light circuits? We have several options for double tail lights, such as # 47-84-610,...
    view full answer...

  • Recommended Lights to Increase Visibility on Hitch-Mounted Bike Rack
  • The Optronics Sealed, Streamline LED Trailer Light # STL79RB referenced in your question will work to provide an additional light on your bike rack, however there may be easier options. You might have trouble mounting the light assembly to the rack itself and the 3-wire design will not allow for easy disconnect when you are not using the bike rack. For an easier option, I recommend looking at the LED Light Kit # 98174LED. You can easily mount these to your bike by using the Mounting...
    view full answer...

  • Replacement Lenses and Lights for Glo-Brite 118A/117R
  • For your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics # A44AB; the lights themselves are the Optronics # MC44AB. The Glo-Brite 117R can use replacement lens # A44RB while the light is # MC44RB. I've added links to video reviews of the lights for you to check out as well.
    view full answer...

  • Replacement for Bargman 68 SAE-P2-A-81 Trailer Clearance Light 30-68-510
  • The Optronics lights, # MC48RB for red and # MC48AB for amber, are the equivalent lights to the Bargman 34-68-511 and 30-68-511. So they are not exactly the same but they could work depending on the application. The Optronics lights are 3-29/32" L x 1-27/32" W x 1-1/32" D and the mounting holes are spaced 3-3/8 inches apart on center.
    view full answer...

  • Wiring For Trailer With Brakes For Compatibility With 7-Way Connector On 2016 Dodge 2500
  • Since your 2016 Dodge 2500 has a 7-way, I recommend just adding a 7-way trailer wire connector to your trailer like # H20046. This will give you a simple connection between your vehicle and trailer without converters. You can simply tape up the wires you aren't using at the trailer and leave them in your junction box. If you want a 7 way with junction box, you can use the Epicord 7-Way Molded Trailer Plug with Junction Box - 10' Long, # 277-000141. Adding this molded 7-way plug will...
    view full answer...

  • Replacement Lens for Optronics Part # 20327-02
  • The "20327-02" light base is a rectangular shaped clearance light measuring 4" long x 2" wide which was made by Optronics. The light has since been discontinued along with the replacement lens but we have had customers use part # A32RB for a red lens or part # A32AB for an amber lens as a direct replacement.
    view full answer...

  • Red Clearance Light Recommendation SAE-A-95
  • Sounds like you are looking for the # MC48RB which is the red version of the # MC48AB that you referenced.
    view full answer...

  • Availability of Replacement Trailer Light for Glo Brite Lights 118a
  • For the same size light, we have the Rectangular Trailer Clearance, Side Marker Light with Reflector, 2 Wire - Amber # MC44AB or the LED version with 6 diodes # MCL44AB. These will both be 4 inches long by 1-1/2 inches wide with 3 inch on center mounting holes. For red you'd need the part # MC44RB.
    view full answer...

  • Upgrading Lights on 2000 Tracker PT175 Trailer to LED
  • We do offer a wide variety of replacement lights for trailer but since trailer manufacturers don't keep a record of what they use on trailers I would need some pictures of the lights you are wanting to replace along with some measurements so I can be sure to recommend the correct parts.
    view full answer...

  • License Plate Holder and Light for Use on Ramped Utility Trailer
  • You can add a license plate holder and light to your ramped utility trailer either with a single item such as # LPL55CB or # PM436B, or you can choose separate plate holders and lights to let you choose the designs you most prefer, such as plate holder part # CR30830 and light part # LPL12CKM2B. It may be easiest to use one product; my choice would be # LPL55CB since its LED light uses much less power than a typical bulb light (only about one-tenth as much power). You will make a...
    view full answer...

  • 12V LED Lights for Inside a Cargo Trailer
  • There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added....
    view full answer...

  • 12V LED Lights for Inside a Cargo Trailer
  • There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added....
    view full answer...

  • 12V LED Lights for Inside a Cargo Trailer
  • There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added....
    view full answer...

  • 12V LED Lights for Inside a Cargo Trailer
  • There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added....
    view full answer...

  • 12V LED Lights for Inside a Cargo Trailer
  • There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added....
    view full answer...

  • 12V LED Lights for Inside a Cargo Trailer
  • There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added....
    view full answer...

  • Recommended 6-1/2 x 2 Inch Oval LED Tail Lights With Wires And Grommets
  • We have 6-1/2 x 2 inch lights but the wires and grommets are sold separately. I recommend the the Trailer Tail Light - Stop, Tail, Turn - LED - Waterproof - 10 Diodes - Red Lens # STL72RB along with the 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead # A45PB and the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB. This combination will give you the lights you are looking for.
    view full answer...

  • Availability of 16 Gauge Wire for Trailer Lights
  • The Optronics 4-Way Wishbone Trailer Wiring Harness # A25W2GWB that you referenced has 18 gauge wire for the ground and 20 gauge wire for all of the lighting functions. I check with all of the other wishbone harnesses that we have and they all use similar gauge wiring none of which is 16 gauge. For 16 gauge wiring you can use the Deka Bonded 4 Wire # 16-4B-1 which is sold by the foot. I recommend using heat shrink butt connectors like part # DW05744-10 and the Quick-Fix Replacement 4-Way...
    view full answer...

  • Replacement Trailer Clearance Lights for GloBrite 122r/122y
  • The globrite 122 in red or yellow/amber are 3.75 inches by 1.70 inches from what I can find online. We do not have a direct replacement, however the closest dimension we have to replace them is 3-1/2 by 1 inch. I recommend the # MC68RB and # MC68AB. If you want to go larger, then I recommend the 4x 1-1/2 inch LED # MCL17RB and # MCL17AB.
    view full answer...

  • Rewiring Boat Trailer for 7-Way to Use LED Lights
  • There are a number of things you will need if you want to re-wire your boat trailer to use LED lights and you should start with the Epicord 7-Way Molded Trailer Plug with Junction Box # 277-000141. Keep in mind you will also need Ring Terminals # 44-5310A and Loom Clamps # A0500 The box is color coded like this: - White (ground): 10 gauge - Black (12V power): 10 gauge - Yellow (reverse/auxiliary): 14 gauge - Red (left turn and stop): 14 gauge - Green (tail and running lights):...
    view full answer...

  • Replacement Trailer Lights That Are Recessed Ovals With Grommet
  • We don't have any lights in that specific size. The closest we have are the LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 16 Diodes - Oval - Clear Lens # STL211RCB that measure 6-7/16" long x 2-5/16" tall x 1-1/2" deep. These install with the PVC Grommet for 6-1/2" Oval Trailer Tail Lights # A70GB which should account for the measurement differences you mentioned. Other options are the LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 16 Diodes -...
    view full answer...

  • Driver and Passenger Side Low Profile LED RV Tail Lights
  • Sure thing! What you are looking for is the Low Profile LED RV Tail Light # RVSTL20 which is the passenger side light. This pairs together with the Low Profile LED RV Tail Light # RVSTL21,which is for the driver side and has the license plate light. I have added links to video reviews of both lights for you to check out.
    view full answer...

  • Can Sections of Optronics Flexible LED Light Strip UCL90CB Be Re-Connected
  • Yes, you can use any cut-off sections of the 17-Foot LED Strip Lights like # UCL90CB (white) and # UCL90BCB (blue) by adding Snap-On 12V Lead part # A90PB. In the same way part # A90P1B can be used to link two complete strips together. Each complete 17-foot section will draw 2.7-amps.
    view full answer...

  • Can Sections of Optronics Flexible LED Light Strip UCL90CB Be Re-Connected
  • Yes, you can use any cut-off sections of the 17-Foot LED Strip Lights like # UCL90CB (white) and # UCL90BCB (blue) by adding Snap-On 12V Lead part # A90PB. In the same way part # A90P1B can be used to link two complete strips together. Each complete 17-foot section will draw 2.7-amps.
    view full answer...

  • Replacement Light for Optronics Red Clearance Light 20327-02
  • Optronics discontinued their light model 20327-02 some years back and we no longer have lens or base parts for it. You can instead use part # MC32RB for an incandescent light or part # MCL32RB for a high-efficiency LED type. Both have a white base.
    view full answer...

  • Replacement Wesbar Trailer Taillights for Shorelandr Boat Trailer
  • Can I get a picture of the lights possibly? Since it's a Wesbar light we probably have what you need since we carry that brand.
    view full answer...

  • Clearance Light Replacement for Glo Brite 122-Y Lights on Trailer
  • I have a solution I can provide for you but we do not carry the replacement lens you are looking for. The clearance light part # MCL31AB and # MCL31RB are very close in shape and dimension to the lights you are looking for. They are both 4 inches wide by 2 inches tall. The # MCL31AB is amber in color and the part # MCL31RB is red in color.
    view full answer...

  • Replacement Tail Lights for 2006 Prestige Trailer Mariah Boat Trailer
  • We have both standard incandescent and high-efficiency LED type boat trailer lights you can choose from and we also have LED-type replacement "bulbs" that let you convert existing light fixtures to brighter and less-power-hungry LED operation. It sounds like you have wraparound lights like Wesbar # 271595 and # 271594, which are the efficient LED type. These lights are very close to your dimensions. These 8-function lights are submersible and they include side and rear reflectors. If...
    view full answer...

  • Recommended LED Tail Lights Similar to Discontinued Bargman 07 Series Lights
  • We do not currently carry those lights. Trailer light styles change, so I think these were discontinued by the manufacturer back in April of 2016. For a similar light, I recommend the Low Profile LED RV Tail Light - Stop, Tail, Turn, License Plate - 12 Diodes - Driver Side # RVSTL21 and passenger side # RVST50. If you like the rounded look, then I recommend the Low Profile LED RV Tail Light - Stop, Tail, Turn, License Plate - 10 Diodes - Driver Side # RVSTL11 and passenger side...
    view full answer...

  • Replacement Amber Light For Brite Glo 118A/117R
  • For the same size light, we have the Rectangular Trailer Clearance, Side Marker Light with Reflector, 2 Wire - Amber # MC44AB or the LED version with 6 diodes # MCL44AB. These will both be 4 inches long by 1-1/2 inches wide with 3 inch on center mounting holes.
    view full answer...

  • Converting Trailer Lights to LED Operation
  • You have a couple of options for converting your Pace Arrow trailer lighting from incandescent to brighter high-efficiency LED operation. One is to replace the entire set of lights with new LED-type fixtures, but another is simply to install replacement LED "bulbs" in place of the standard incandescent ones that are now in your Bargman lights. This option can be substantially less costly and also far easier since there is no wiring or other modifications needed; you'll simply pull out...
    view full answer...

  • Square Trailer Tail Lights Compatibility with Metal Light Guard for 440 Style Lights
  • The Optronics Submersible, Under 80" Trailer Light Kit with 25' Wiring Harness # TL5RK will work seamlessly with the Light Guard - Unpainted Steel for 440 Tail Light # LG440NP you referenced. This guard is specifically made for these style lights so the dimensions will fit them just like the pictures on the product page. I've also attached a photo of the similar LED lights # TLL9RK in the same size for reference.
    view full answer...

  • Replacement Tail Lights for a 2006 Forest River 5th Wheel Travel Trailer
  • The light in your pictures seems to be a # RVST50, wider at the bottom, little tabs on the sides holding the lens on. If your existing light is approximately 8-5/8" long x 4-5/8" tall then it will fit. The version with the license plate bracket is # RVST51 like you said. I think you have found the lights you need!
    view full answer...

  • Replacement Incandescent Light Bulb For Bargman 99 Series Trailer Side Marker Light
  • I went to our warehouse and pulled one of our Bargman side marker lights, part # 3499001. The replacement incandescent bulb that is in the light is part # A194B. These are sold individually so when ordering just adjust the number of bulbs you need for your trailer.
    view full answer...

  • Replacement Optronics Clear Oval Trailer Utility Light for BUL72CBGK on a MasterCraft Trailer
  • Yes, the difference is that the BUL72CBGK has the grommet included. To replace both the light and grommet you will need # BUL72CB and # A70GB. I looked at a few images of MasterCraft Trailers and while we don't have the exact information of what it was outfitted with, this light appears to be similar, if you are looking for the red light with clear lens you will want # STL82RCB. Typically the number of the light will be stamped on the back of the unit itself. I have linked the above...
    view full answer...

  • Comparing the Hot-Line LED Trailer Backup Light and GloLight LED Combination Trailer Tail Light
  • In regards to light output, the Hot-Line LED Trailer Backup Light part # 328-003-6017W will physically put out more light than the reverse light portion of the GloLight LED Combination Trailer Tail Light part # STL161RLB as it has twice as many diodes (12 vs 6). In order to run the reverse light circuit you can use part # 16-1-1 (per foot).
    view full answer...

  • Bunk Light and Jack Adapter for 2003 Fleetwood Taos
  • We don't have the dome lights that come with the bunk light integrated, but we do have the RV Bunk Light Adapter with Jack - White # RVC100 so that you can utilize the RV Interior Bunk Light with Fan - White # 328-001-103.
    view full answer...

  • LED Tail Lights for a Ranger Trail XT188 Boat Trailer
  • I checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light # STL22RB is a great option for an LED upgrade. These lights use pigtail # A47PB and will fit the mounts currently on the trailer. If your trailer has different tail lights, such as those that hang from studs then # STL16RB and # STL17RB are great options for that mounting style. If neither of the recommendations above are the light style...
    view full answer...

  • Replacement Lens for Optronics Tail Light on 2006 Tracker Trailer
  • From the looks of your picture the light you have is an Optronics # ST36RPG. The replacement lens is # A39RB for the main lens and # A37RB for the side marker.
    view full answer...

  • Replacement 5-Way Trailer Wiring for Boat Trailer
  • For new 5-way wiring what you'll need is the part # A40W5B. This will handle all of the wiring that runs from the connector back to the lighting assemblies as well as for a reverse lock out solenoid. Surge brakes don't always require wiring as they don't always have reverse lock out solenoids. It's very possible yours does not have one so wiring may not be needed. If you see a solenoid at the back of the actuator on the brake line you will want to run the blue wire of the 5-way to it. I...
    view full answer...

  • Replacement Trailer Lights to Replace Reflect-O-Lite 910-950
  • From my research the Reflect-O-Light 910-950 is an 8-5/8 by 4-5/8 inch light. For a replacement we have the Optronics # RVST51 for the left side and # RVST50 for the right. The driver's side does have the license plate light included. Unfortunately, we do not have any lights of that measurement that are LED.
    view full answer...

  • Recommended 8 Inch RV Scare Light With LED Light Bulb Replacement
  • The closest thing we have is the RV Scare Light, # RVSL31, which can use and LED bulb. It uses an 1156 bulb, so a white LED 1156 like # AR50387 would fit the socket. That will give you 285 Lumens of light.
    view full answer...

  • Recommended 8 Inch RV Scare Light With LED Light Bulb Replacement
  • The closest thing we have is the RV Scare Light, # RVSL31, which can use and LED bulb. It uses an 1156 bulb, so a white LED 1156 like # AR50387 would fit the socket. That will give you 285 Lumens of light.
    view full answer...

  • LED Replacements for Trailer Clearance Light Part 154A-R and PM-102
  • The closest LED replacement we have for the Trailer Clearance Light part 154A-R is the Thin Line LED Fender Clearance Light part # MCL65ARB. This light has both a red/amber lens, 10 diodes, and measures 3-15/16" long x 1-1/4" wide x 7/8" tall. For a direct fit bracket/harness you will need to use the Black Bracket and Single Wire Plug part # A65PB. The closest LED replacement we have for the Trailer Clearance Light part PM-102 is the Round Marker / Clearance Light part # MCL0039ABB....
    view full answer...

  • Measurements of Replacement Light Lenses for Lawnmower Trailer
  • I can't tell you if they're a definite fit but I can certainly give you all the measurements so that you can easily find out. # A36RB is 2-13/16 inches wide, 2-1/16 inches tall, and the mounting holes are 2-3/8 inches apart. # A35AB is 2-7/8 inches wide, 2-1/8 inches tall, and the mounting holes are 2-3/8 inches apart. # 2423287 is 2-3/4 inches wide, 2 inches tall, and the mouinting holes are 2-5/16 inches apart.
    view full answer...

  • How to Wire Optronics LED Stop/Tail/Turn/Back-Up Light STL264RB For Tail and Stop Lights Only
  • The Optronics LED Thinline Stop/Tail/Turn/Back-Up Light # STL264RB is a high-efficiency LED-type multi-function trailer light that you can install for the specific functions you want. The light has 4 pigtail lead wires: white is ground; red is brake light; black is tail light; and yellow is turn signal light. Since you need only the brake and running light functions in your application you will use the white ground wire, of course, and the red and black wires. You will also need Vehicle...
    view full answer...

  • Tracker Boat Trailer Optronic Brake/Left Blinker Stopped Working Replacement Light Solution
  • Based on the number you listed the light fixtures you need is the kit part # TLL160RK for both lights or just part # STL116RB for right hand or part # STL117RB for left hand.
    view full answer...

  • 7-Way Connector and Fusion LED Trailer Lights Functions by Wire Color
  • I can tell you which wires on each the light and plug are for, though you will want to use a circuit tester such as # 40376 to verify the functions. The the Fusion LED Trailer Tail Light # STL211XRFHB has a 4-wire pigtail. The white wire is ground, brown wire is backup light, red wire is brake light and black wire is tail light. The Epicord 7-Way Molded Trailer Plug # 277-000143 is a 7-way connector that has the same functions as you see in the accompanying diagram. The yellow wire...
    view full answer...

  • Is Thinline Opti-Brite LED Interior Strip Light ILL72CB Good for Interior Cook Top Lighting
  • Considering the limited space that you have in your truck camper the Thinline Opti-Brite LED Interior Strip Light - 21-7/8" Long x 1" Wide x 5/8" Thick Item # ILL72CB is a great choice. I linked a video review of this light for you. I have also included a link to all of the LED ceiling lights we offer. Some are more homey such as # 277-000330-331.
    view full answer...

  • Is Thinline Opti-Brite LED Interior Strip Light ILL72CB Good for Interior Cook Top Lighting
  • Considering the limited space that you have in your truck camper the Thinline Opti-Brite LED Interior Strip Light - 21-7/8" Long x 1" Wide x 5/8" Thick Item # ILL72CB is a great choice. I linked a video review of this light for you. I have also included a link to all of the LED ceiling lights we offer. Some are more homey such as # 277-000330-331.
    view full answer...

  • How to Convert Incandescent Trailer Lighting to LED Operation
  • RV manufacturers do not maintain detailed specs on smaller items such as the lights installed on their motorhome products but we do offer a full range of replacement lenses, complete light assemblies and also LED replacement "bulbs" that allow you to convert the RV to high-efficiency LED lighting without having to change all of the fixtures too. I have linked for you our main pages for trailer light replacement lens parts, complete light fixtures and for the LED replacement elements. The...
    view full answer...

  • Recommended Lights for 28 Foot Gooseneck Horse Trailer
  • The LED Trailer Tail Light - Stop, Tail, Turn, Backup - Submersible - 14 Diodes - Oval - Pigtail # STL68RB will help give you backup lights, with 4 bright white LED's. Since you stated that your main goal is to gain backup lights, the Sealed 6-1/2" Oval LED Trailer Utility Light, Flange Mount, 10 Super Diode - Clear # BUL78CB has 10 bright LED lights that will give you a much better light for backing up, so I recommend leaving your current lights and adding these brighter lights. They...
    view full answer...

  • What is the Difference Between Two Optronics 80-Inch LED Trailer Light Kits?
  • The two kits are both made by Optronics, and there is absolutely no difference between the lights in the kit with the 25-foot harness, # TLL16RK, and the kit without it, # TLL160RK. The LED lights are product # STL16RB and # STL17RB. These are covered under the Optronics limited lifetime warranty, covering you if a diode on the light fails due to a defect.
    view full answer...

  • Replacing Incandescent Light Bulbs with High-Efficiency LED Elements to Save Trailer Battery Power
  • Changing from the common incandescent 921 bulb to an LED type that drops right in in place of it is a great way to accomplish several things at once. LEDs use only 1/10th as much power and they generate much less waste heat; this means that your RV battery power will last longer. LEDs also do not wear out like incandescent bulbs. And they do not tend to change color. Incandescent bulbs tend to turn ever more yellow with age and use. LEDs are made in several color options too, which...
    view full answer...

  • Replacement Tail Lights for an EZ Loader Boat Trailer
  • I do not know exactly what lights your boat trailer came with nor would we have an exact OEM replacement but we do have the Miro-Flex LED Trailer Tail Lights part # TLL28RK which are a submersible LED tail light that should work well for you. The lights mount via two bolts placed 2" apart on center. The circuit boards are sealed, which means that water will not damage the diodes or circuit boards. The lights do not come with sealed wiring connectors but you can add them using part #...
    view full answer...

  • Replacement Lens for Trailer Light 22368-022
  • I had a hard time finding a lot of information using the two part numbers you found both on the lens and the light base. It looks like the base number may refer to the Optronics Trailer Light # MC32AB, for which the correct replacement lens is part # A32AB. To be sure you can take a couple quick measurements on your existing lens. This lens measures 4 inches long, 2 inches wide, and 1/2 inch tall. If this does not look to be the correct lens please feel free to email me a picture...
    view full answer...

  • Trailer Light Replacement Lens for Light Marked SAE-A-P2-DOT-02
  • Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the # A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the part # MC32RB.
    view full answer...

  • Replacement Tail Light Lens for 2018 Grand Design Imagine 2500RL
  • The Replacement Lens # AST61B referenced in your question is designed for the Optronics # RVSTL61 and # RVST61 Trailer Tail Lights. The lens itself measures 8-5/8 inches long and 3-3/16 inches tall Unfortunately trailer manufacturers do not keep a good record of smaller parts like these that they install at the factory so I am unable to verify if this is the exact replacement lens for the lights on your 2018 Grand Design Imagine. With that being said I took a look at some pictures of...
    view full answer...

  • Is Trailer Light STL22RB Replacement for PM 421 Light on Trailer
  • Yes, the connection on the Micro-Flex Trailer Tail Light - Stop, Tail, Turn - LED light, part # STL22RB, is compatible with the PM 421 lights that you currently have on your Silver Star horse trailer. You will not need a new pigtail since it uses the same pigtail. However if you do need to replace a pigtail we have the 90 degree option, part # A47PB, and the regular option, part # A45PB. We also carry a replacement grommet if you need that as well, this would be part # A70GB but if yours...
    view full answer...

  • Removing Lenses of Optronics Fender Light and Replacing Bulbs with LEDs
  • The lens of # BA44FNR and # BA44FNL should pop off if you take a small flat head screw driver and pry it off. Unfortunately, we don't have any videos or instructions that show the removal. For replacement LED bulbs you can use # P340194A-360.
    view full answer...

  • Needing a Replacement Red Clearance Light Lens That Measures
  • I found a replacement lens for you. You will need the Bargman Light Lens # 34-59-010. This lens is a red clearance light lens that measures 4 inches L X 2 inches H x 5/8 of inch deep.
    view full answer...

  • Are There Rectangle RV Dome Lights
  • There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights: - Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22 - Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW - Optronics Low Profile LED Trailer Dome Light - 53 Lumens - Rectangle - Clear Lens # ILL35CB - Opti-Brite...
    view full answer...

  • Are There Rectangle RV Dome Lights
  • There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights: - Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22 - Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW - Optronics Low Profile LED Trailer Dome Light - 53 Lumens - Rectangle - Clear Lens # ILL35CB - Opti-Brite...
    view full answer...

  • Are There Rectangle RV Dome Lights
  • There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights: - Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22 - Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW - Optronics Low Profile LED Trailer Dome Light - 53 Lumens - Rectangle - Clear Lens # ILL35CB - Opti-Brite...
    view full answer...

  • Are There Rectangle RV Dome Lights
  • There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights: - Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22 - Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW - Optronics Low Profile LED Trailer Dome Light - 53 Lumens - Rectangle - Clear Lens # ILL35CB - Opti-Brite...
    view full answer...

  • Are There Rectangle RV Dome Lights
  • There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights: - Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22 - Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW - Optronics Low Profile LED Trailer Dome Light - 53 Lumens - Rectangle - Clear Lens # ILL35CB - Opti-Brite...
    view full answer...

  • Are There Rectangle RV Dome Lights
  • There are absolutely rectangle RV dome lights and you can choose between incandescent or long-lasting LED; here are the options for rectangle RV dome lights: - Optronics RV Interior Double Dome Light with Switch - Incandescent - Rectangle - Clear Lens # RVIL22 - Omega RV Double Dome Light with Switch - Surface Mount - Incandescent - Rectangle - Clear Lens # 328-001-902XPW - Optronics Low Profile LED Trailer Dome Light - 53 Lumens - Rectangle - Clear Lens # ILL35CB - Opti-Brite...
    view full answer...

  • LED Replacement for WESBAR 203561 Light
  • Yes, the Optronics Trailer Light, # STL70RB, will replace the Wesbar 203561 to upgrade to LED lights. You will want to check the factory grommet when you remove the light, if the factory grommet is in good condition you can use it with the LED upgrade. If the factory grommet is worn or shows any signs of damage, now is the time to replace it. You would use the Optronics Rubber Grommet, # A70GB. Same thing on the 3-prong plug connector, check it also to make sure it is in good condition....
    view full answer...

  • Recommended Load Resistor for Installing Optronics LED Trailer Light STL43RB
  • When high-efficiency LED type lights are installed in place of power-hungry incandescent bulbs it is often necessary to install a load resistor. The resistor turns some of the incoming power into heat and in doing so it mimics the higher power draw of an incandescent bulb. This will prevent the hyper-flashing common when LEDs are installed in an incandescent lighting system. For the Optronics Round LED Trailer Stop, Turn and Tail Light # STL43RB you can use their load resistor kit #...
    view full answer...

  • How To Ground Trailer Tail Lights Without a Ground Wire To a Wooden Surface
  • The Standard Trailer Light Kit with 25' Wire Harness part # TL29BK as I am sure you noticed grounds via the mounting hardware therefore there is not a singular ground wire. In order to attach this light to a wooden surface you will need to run a ground wire yourself up to the trailer tongue using the mounting studs on the back with ring terminals part # DW05705-1 and wire part # 12-1-1. The other option you have is to use the Peterson LED Light Kit for Trailers part # V944 which does...
    view full answer...

  • Clearance Light Replacement for Glo Brite 122-Y and 122 R Lights on Trailer
  • I have a solution I can provide for you but we do not carry the replacement lens you are looking for. The clearance light part # MCL31AB and # MCL31RB are very close in shape and dimension to the lights you are looking for. They are both 4 inches wide by 2 inches tall. The # MCL31AB is amber in color and the part # MCL31RB is red in color.
    view full answer...

  • Availability of Replacement Trailer Taillights Reflect-O-Lite SAE-P2-A-72
  • For an exact replacement to what you sent in a picture of we have the part # MCL31RB for a red taillight and part # MCL31AB for an amber light.
    view full answer...

  • LED Horse Trailer Lighting Recommendations for Interior and Exterior
  • In terms of brightness the part # ILL08COB is really hard to beat as it's going to be the brightest option we carry. We do have the part # ILL06COB which costs a bit less but is still relatively bright. About half as bright as the one you mentioned. For a bright LED flood light you'd then want the part # TLL50FB for the porch type lights you wanted to replace.
    view full answer...

  • LED Horse Trailer Lighting Recommendations for Interior and Exterior
  • In terms of brightness the part # ILL08COB is really hard to beat as it's going to be the brightest option we carry. We do have the part # ILL06COB which costs a bit less but is still relatively bright. About half as bright as the one you mentioned. For a bright LED flood light you'd then want the part # TLL50FB for the porch type lights you wanted to replace.
    view full answer...

  • LED Horse Trailer Lighting Recommendations for Interior and Exterior
  • In terms of brightness the part # ILL08COB is really hard to beat as it's going to be the brightest option we carry. We do have the part # ILL06COB which costs a bit less but is still relatively bright. About half as bright as the one you mentioned. For a bright LED flood light you'd then want the part # TLL50FB for the porch type lights you wanted to replace.
    view full answer...

  • LED Horse Trailer Lighting Recommendations for Interior and Exterior
  • In terms of brightness the part # ILL08COB is really hard to beat as it's going to be the brightest option we carry. We do have the part # ILL06COB which costs a bit less but is still relatively bright. About half as bright as the one you mentioned. For a bright LED flood light you'd then want the part # TLL50FB for the porch type lights you wanted to replace.
    view full answer...

  • LED Horse Trailer Lighting Recommendations for Interior and Exterior
  • In terms of brightness the part # ILL08COB is really hard to beat as it's going to be the brightest option we carry. We do have the part # ILL06COB which costs a bit less but is still relatively bright. About half as bright as the one you mentioned. For a bright LED flood light you'd then want the part # TLL50FB for the porch type lights you wanted to replace.
    view full answer...

  • LED Horse Trailer Lighting Recommendations for Interior and Exterior
  • In terms of brightness the part # ILL08COB is really hard to beat as it's going to be the brightest option we carry. We do have the part # ILL06COB which costs a bit less but is still relatively bright. About half as bright as the one you mentioned. For a bright LED flood light you'd then want the part # TLL50FB for the porch type lights you wanted to replace.
    view full answer...

  • Oval LED Trailer Tail and Backup Light that Mounts with a Grommet
  • The closest match would be # STL211RB. It doesn't have a clear lens or Glo feature though. The grommet for this light is # A70GB and you would need pigtails # A47PB and # A49PB to plug into the back of it.
    view full answer...

  • Replacement Tail Light Lens for Tracker Trailstar Trailer
  • The lights you have on your trailer are # ST37RB and # ST36RB. The replacement lenses are # A39RB for the front lens and # A37RB for the side marker.
    view full answer...

  • LED Dome Light 22 Inches Long x 7 Inches Wide
  • The closest option we have to what you are looking for is the LED RV Utility Light part # DG52644 which measures 23-3/16" long x 6-7/16" wide. This light does however mount a little differently which you can see in the attached photo. We do not have have an LED dome light that is 22" long x 7" wide unfortunately.
    view full answer...

  • LED Dome Light 22 Inches Long x 7 Inches Wide
  • The closest option we have to what you are looking for is the LED RV Utility Light part # DG52644 which measures 23-3/16" long x 6-7/16" wide. This light does however mount a little differently which you can see in the attached photo. We do not have have an LED dome light that is 22" long x 7" wide unfortunately.
    view full answer...

  • LED Dome Light 22 Inches Long x 7 Inches Wide
  • The closest option we have to what you are looking for is the LED RV Utility Light part # DG52644 which measures 23-3/16" long x 6-7/16" wide. This light does however mount a little differently which you can see in the attached photo. We do not have have an LED dome light that is 22" long x 7" wide unfortunately.
    view full answer...

  • LED Dome Light 22 Inches Long x 7 Inches Wide
  • The closest option we have to what you are looking for is the LED RV Utility Light part # DG52644 which measures 23-3/16" long x 6-7/16" wide. This light does however mount a little differently which you can see in the attached photo. We do not have have an LED dome light that is 22" long x 7" wide unfortunately.
    view full answer...

  • LED Dome Light 22 Inches Long x 7 Inches Wide
  • The closest option we have to what you are looking for is the LED RV Utility Light part # DG52644 which measures 23-3/16" long x 6-7/16" wide. This light does however mount a little differently which you can see in the attached photo. We do not have have an LED dome light that is 22" long x 7" wide unfortunately.
    view full answer...

  • LED Dome Light 22 Inches Long x 7 Inches Wide
  • The closest option we have to what you are looking for is the LED RV Utility Light part # DG52644 which measures 23-3/16" long x 6-7/16" wide. This light does however mount a little differently which you can see in the attached photo. We do not have have an LED dome light that is 22" long x 7" wide unfortunately.
    view full answer...

  • Replacement Amber Trailer Light for GloBrite 1250
  • We do not carry the Glo-Brite brand of trailer light (and I believe they are no longer in business) but we do have a replacement for the model 1250. My research indicates this amber lens light measures 6-1/2-inches x 2-5/16-inches, like the part # ST75AB and the LED version # STL75AB. The lights mount using grommet # A70GB as they are recessed mount and not surface mount.
    view full answer...

  • Replacement LED Tail Lights for a Karavan Trailer
  • For your Karavan trailer I recommend LED tail lights # STL57RB and # STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have linked some video reviews of these lights for you.
    view full answer...

  • Polarity of Optronics Sealed Micro-Flex LED Trailer Side Marker # MCL50RB
  • The Optronics Sealed Micro-Flex LED Trailer Side Marker # MCL50RB referenced in your question does have polarity, but the PL-10 Plug # A46PB that you also have is designed so that it can only be plugged in one way. This is essentially how you will know which way to plug the harness into the light. Since LEDs use diodes, if you were to somehow connect the harness backwards, the light simply would not work and you would just need to turn it around and plug it back in. On the harness itself,...
    view full answer...

  • Using a Trailer Tail Light on a Cargo Carrier
  • A clearance light like # MCL17RB will not provide you the separate running, brake, and turn functions. It will stay on all the time your running lights are on. Another option instead is to use a strip light like # STL59RB. It will provide all of the functions however if you just install one it will flash regardless of which turn signal you're using. You can install two, one on each side of the cargo carrier if you'd like. You'll also need to install a 4-way connector on the carrier...
    view full answer...

  • Is there an LED Version of Optronics Marker Lights # MC48RB and # MC48AB
  • There isn't an LED version of the MC48 series of lights, # MC48RB and # MC48AB, but I do have a solution for you. Since the bulbs in these lights are replaceable you could swap out the regular bulbs for LED bulbs. For the amber lens you would need an amber light, # 1942-5SMD-A. For the red lens you would need a red light, # 1942-5SMD-R.
    view full answer...

  • Do Optrionics LED Trailer Light # STL78RB Come as a Set or Sold Individually?
  • The Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Red Lens # STL78RB is a single light. If you want a set, you will need to change the quantity box on the product page when ordering. I've attached a photo of the dimensions of the light as well as the mounting hole locations to assist. You may also be interested in the accent ring # A78CB or reflector # A78RXB which snap on to cover the mounting screws.
    view full answer...

  • Availability of Clear Lens Fusion LED Combination Tail Light
  • Yes, we do offer the part # STL264RCB that you referenced which is basically just the all clear lens version of the part # STL264RB.
    view full answer...

  • Recommended Parts and Wiring for Adding LED Lights to Aluminum Cargo Carrier with Ramp
  • Thank you for all of the helpful information! I do have a few different options for you to add LED lighting to your scooter carrier that resembles the MaxxTow 27x47 Cargo Carrier # MT70100. You can definitely use the Optronics Streamline LED Trailer Tail Light # STL79RB with wiring like the Hopkins Endurance # HM38134 by just using heat shrink butt connectors # DW05744-5. Since your carrier is aluminum you will need to cut off the eyelet on the ground wire and splice it to the white...
    view full answer...

  • How Many Strips of Optronics Flexible LED Light Strip # A90P1B Can Be Connected Together
  • Optronics recommends only connecting two of the LED light strips part # UCL90CB together with the # A90P1B. This would put you at a total of 34 feet since each strip is 17 feet long.
    view full answer...

  • Porch Light Recommendation for RV
  • The most popular RV porch light we have is the RV Rectangular Porch light part # RVPL1C which we've sold quite a few of and have not had any reports back of leaks or rust.
    view full answer...

  • Porch Light Recommendation for RV
  • The most popular RV porch light we have is the RV Rectangular Porch light part # RVPL1C which we've sold quite a few of and have not had any reports back of leaks or rust.
    view full answer...

  • Do I Have to Replace the Wedge Lights on my Boat Trailer with Wedge Lights for LED Upgrade
  • When replacing trailer lights (with or without LED) you don't necessarily have to get the exact same light or even light style. Most people like to keep the same style and size so that they don't have to mess with repainting or making sure that everything lines up correctly. If your current light has the same dimensions of the Peterson Sealed Wedge-Type Clearance Marker w/Reflex # M116A then the Optronics Sealed, Miro-Flex, Thin Line, LED Trailer Marker # MCL63AB has slightly different...
    view full answer...