Yes, we do have mounting brackets for the Westin HDX Grille Guard with Punch Plate item # 57-3795 or item # 57-3790. To mount this grille guard to your 2017 GMC Sierra 2500 you will want the Replacement Mounting Kit for Westin HDX Grille Guard item # 57-379PK.
This replacement hardware kit will only work with those two grille guards. They won't work on anything else. view full answer...
Yes, we do. The best grille guard for your 2019 Toyota Tundra is going to be the Westin Sportsman Grille Guard item # 45-3700. This custom fit one piece grille guard bolts to your Tundra with included hardware and does not require drilling.
Thanks for the information about the sensor location. All the grille guards mess with the front sensors and cameras somewhat but this one with its center open design will give you the most clearance.
I attached a picture below of the black item #... view full answer...
The Westin Sportsman Grille Guard # 40-3825 is an excellent choice for your 2017 Toyota 4Runner TRD Off-Road. This has a shipping weight of 71 lbs so the product itself will weigh around 65 lbs once we remove it from the shipping materials.
Attached is an installation video of this grille guard on a 2019 4Runner for you to check out. view full answer...
The Westin HDX Grille Guard with Punch Plate # 57-3555 weighs 98lbs for your 2017 Ram 3500.
If you have front parking sensors you will need the Parking Sensor Relocation Kit # 40-0015S.
The Universal Light Clamps # 57-0005 are the same powder coated black as the Grille Guard and will allow you to lights to the lower grill bar. view full answer...
The Westin HDX Grille Guard item # W88XV you were looking at will block sensors that it covers on your 2023 Ford Transit. I don't have a Ford Transit in front of me but I do own a similar grille guard for my truck. Basically anything above the bumper will be behind the guard. Bumper sensors will be be ok unless they're around the center where the grille guard attaches.
I have linked the instructions below so you can get an idea of what if any sensors will be blinded. Westin has some great... view full answer...
The Westin HDX Winch Mount Grille Guard # 57-92370 has a shipping weight of 101-lbs. The actual weight of the guard without the carton and all of the packing material will be right around 95-lbs.
This grille guard is a confirmed fit for your 2016 Ford F-350 and the installation instructions are linked for your reference. view full answer...
I went out to the warehouse to measure the front mount receiver # 65049 for you. From the center of the forward most bolt hole to the face of the receiver is 5-3/4 inches. But that is only one piece of the puzzle. If your grille guard uses the same mounting locations then you can have the grille guard or the hitch but not both since both are designed to make contact directly with the frame. view full answer...
The Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" item # 65078 mounts below the tow hooks on your 2018 GMC Sierra 2500. All of the grille guards like the Aries Pro Series Grille Guard with Mesh LED Cover Plate - Textured Black Powder Coated Steel item # AAP4085 mount inside the frame where the tow hooks are mounted. The problem is they occupy the same space on the front end of your truck. The receiver would be blocked by the bar at the bottom of the grille guard. You will... view full answer...
The shipping weight which is the weight of the product itself and the packaging is 105 pounds for HDX grille guard # 57-3785 for your 2015 Chevy Silverado 2500. Packaging for a large item like this can be up to 5 pounds so figure 100 pounds of pure grille guard awesomeness. view full answer...
The Westin Sportsman Grille Guard # 40-1605 for your 2009 Toyota Tacoma weighs about 90 pounds by itself. The Westin MAX Winch Mounting Tray # 46-21605 weighs about 60 pounds.
This means both items together will add a total weight of around 150 pounds to your Tacoma.
I have attached the written installation manuals for these products below that you can also take a look at. view full answer...
The Westin E-Series Bull Bar # 31-6005 weighs about 30 lbs while the Aries Grille Guard # AA2068 weighs about 75 lbs. In looking at the instructions (which are linked for you to reference) it doesn't look like your tow hook will need to be removed.
Both of these products are a confirmed fit for your 2017 Toyota Tacoma. view full answer...
While the Westin HDX Winch Mount Grille Guard with Punch Plate - Black Powder Coated Steel # 57-93785 does have a 12,500 lb weight capacity not every winch with a higher capacity will be compatible due to how the mount is set up. I checked out the winch you mentioned and it does require 4 bolts on the front of the winch to attach so this wouldn't work with this grille guard but it wouldn't be because of capacity. view full answer...
Take a look at the diagrams I made that show the measurements of the replacement bracket # 40-120PK. Also, the metal is around .233 inches thick.
This is the replacement bracket for the Sportsman Grille Guard # 45-1200. view full answer...
I spoke to my contact at Westin about the Sportsman Grille Guard, # 45-2290. He stated that typically, when measuring from the front of the bumper, the guards can extend out another 6 to 9 inches. He did not have an exact measurement so I would err on the side of caution and use the longer measurement. I have included a link to the installation instructions for you to view. view full answer...
As seen in the attached photos, the Westin MAX Winch Mounting Tray - Black Powder Coated Steel # 46-23735 measures 44" long and measures 10" from the front of the tray to the mounting tab. This is confirmed to fit the 2011 Ford F-350. view full answer...
We do have the length of the receiver for you of the Curt Front Mount Trailer Hitch Receiver # 31043 that fits your 1999 Chevy Suburban 2500 with RWD.
As you can see in the accompanying photo, the measurement from the front of the crosstube to the end of the receiver is 7-1/4 inches.
I have added a link to the instructions for you to check out of the Curt Front Mount Trailer Hitch Receiver # 31043. view full answer...
I attached a photo that shows the bolt layout on the mounting brackets for Winch Carrier for Bulldog Winch Grille Guard - 12,000 lbs # BDW733601. The bottom two bolts are 3-1/8" apart, while the top and bottom bolts (parallel to each other) are 4-1/8" apart. view full answer...
On the Westin Sportsman, part # 45-3900, the entire bar that the lights mount to between the two uprights is 40 inches. I wasn't able to get the exact spacing between the holes from Westin but my contact did tell me that they're reasonably even spaced so there's roughly 8 inches between each hole. view full answer...
If you have a brush guard and you're not referring to the factory rockguard or skid plate you will most likely need to remove it to flat tow your 2012 Jeep Liberty. All of our base plate kits like the Blue Ox item # BX1131 bolt right to the front bumper below the grill. This an extremely sturdy mounting point which is why most brush guards attach there as well.
The Blue Ox item # BX1131 has been confirmed to fit the 2012 Jeep Liberty with or without the factory rockguard or skid plate.... view full answer...
Go To Results