Hey Marcus, so RV AC units need to sit as close to level as possible to ensure that the drains can function properly as well as make sure the oil in the unit can get everywhere it needs to within the AC. Normally the acceptable out of level range is up to 5 degrees either way and you'll be fine. Looking at your picture there's a pretty good chance you are fine but I would grab a level and put it on there and see exactly the level.
Your smart phone might have a level on it as well that... view full answer...
Hey Henry, to get a set of 6 Weigh Safe leveling blocks you would want to go with the set of 4 part # WS88ER and then also the set of 2 part # WS78ER and you'd have all that you need. These can definitely be used with a toy hauler as well.
Do you have side by sides? view full answer...
Hey Brad,
We currently offer only a small portion of the components needed to replace your Schwintek in-wall slide out:
Replacement Spur Gear for Lippert In-Wall Slide-Outs # LC58VR
Lippert Replacement Standard Bearing Block Kit for RV In-Wall Slide-Out # LC379060
Replacement INwall My RV Control Panel for Schwintek RV Slide-Outs # LC24HD
For all other components you would need to go through Lippert Components. If you give them a call they would be more than happy to hook you up with... view full answer...
Hey Melanie, the Weigh Safe Flap Jack Folding RV Stabilizing Blocks # WS78ER are not height adjustable. They can only be used at an 8 inch height. Do you think that would work for you? view full answer...
Your best option to lift your 2015 Keystone sprinter 5th wheel camper is the Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX. This adjusts in increments of 1/4", and can give you up to 2-1/4" of lift. It also helps to keep your axles aligned and parallel to each other.
The way it works is it bolts under your suspension hangers and adds length to them.
If you want blocks rather than hanger extenders, you will need to check your axle tag to see what axle you have. If... view full answer...
Hello David, thanks for reaching out. Scissor jacks like the etrailer Scissor Stabilizer Jacks # e74RV are strictly designed for stabilizing the trailer. They attach to the underside of the trailer then drop to keep the unit from rocking. They should not be used for lifting or leveling the trailer. view full answer...
Hey Steve! I am sorry but we do not carry leveling systems for RV's like your 2005 Fleetwood Bounder. The ones we do carry like the Lippert Ground Control 3.0 item # LC675817 are for 5th wheel trailers. view full answer...
Hi Guy; air bags like the # AL88289 should be filled once you hook up your RV. You will load your truck and hook up the trailer/RV then adjust the air bags as needed to get you level. view full answer...
Thank you for providing those pictures. The correct control panel is the Replacement Control Panel for Lippert Ground Control 3.0 and Travel Trailer RV Leveling System # LC421484. view full answer...
Hello Jim, thanks for reaching out. The 694656 control module you mentioned is for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System. We do have a remote for this leveling system, but you will need to replace your controller with part # LC304136 to ensure it is compatible with the remote. The remote for this system is the following:
- Replacement Touchscreen Remote w/ Charger for Lippert Ground Control 3.0 Electric Leveling System # LC358601 view full answer...
Hi Arthur; we do have a light kit for the 24x60 Curt Cargo Carrier with etrailer Enclosure Cage for 2" Hitches # C63ZJ. What you need is the Light Kit for etrailer Hitch and RV Mounted Cargo Carriers # e67RV. With the cage on the carrier it can definitely obstruct the rear of the vehicle so this will keep you nice and visible.
The light kit plugs into the 4-way on your vehicle just like a trailer would. If you don't already have a 4-way I would be happy to help you find one, just drop... view full answer...
Hey Tim, you can install the JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs # LC191025 on a travel trailer with the Ground Control auto leveling system but you will also need the adapter part # LC314592 according to Lippert. view full answer...
Hey Scott,
This sensor is fully compatible with all monitors for reading 2, 3, or 4 tanks. It can read up to 7 tanks if your RV had the SeeLeveL Soul system installed from the factory. The sensor strip itself # SE78VR isn't the factor here, it's whether or not your trailer has SeeLevel's "Soul" system already installed on it from the factory. The strip itself could be added to a 7-tank system but the SeeLevel controllers we offer max out at 4 tanks. view full answer...
Hey Colleen,
The number gave references the control module for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590, and there is a touchscreen remote that will work with that. What you'll need is the following part number:
- Touchscreen Remote # LC358601 view full answer...
It sounds like you are needing the parts to flat tow your 2000 Jeep Wrangler behind your RV along with a supplemental braking system. The supplemental braking system will activate the brakes in your Wrangler to reduce the chances of cooking your brakes when in the mountains. I recommend using the following parts to make flat towing safest.
Roadmaster Direct-Connect Base Plate Kit # RM-521424-5
Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights # RM-676
Roadmaster Accessory Kit for... view full answer...
Hi Jamie,
Easily the best towing mirrors for your 2024 GMC Sierra 1500 Denali with the cameras underneath are the Longview, with the correct part number for your truck being the following:
- Longview Custom Towing Mirrors # LO54FR
The # LO54FR are easy to put on by sliding over the mirror and tightening with a knob, which also helps to greatly reduce any vibration. They also won't block the cameras; I've added cut outs below of a couple reviews from customers who were nice enough to... view full answer...
Good afternoon Mike. It is heating up here in Missouri this week (about 85 degrees or so) and I'm already over it!
Luckily the Genesis Revive Wallpaper is made to hold up to the heat, and the cold if you're in those climates ever. Genesis uses RV-Rated materials so that the weather and temperature fluctuations do not affect the wallpaper.
Do you need help picking out a kit for your application? We have the following popular options in case you want to check them out :).
-Genesis Revive... view full answer...
Good afternoon Kirt, the Furrion Chill HE Low-Profile RV AC units are going to be very similar to the standard size HE units in regards to sound level and efficiency (amp draw). The only advantage to the Low-Profile units is, well, the lower profile size. It will give your rig reduced wind drag along with lower clearance for tight garages.
Furrion has the low profile in the following complete kits:
-Furrion Chill HE Low-Profile RV AC System white - R32 13,500 BTU # FR86AD
-Furrion Chill... view full answer...
Hey Jeff, so yeah you do want the tow bar to sit as level as possible but you have 3 inches up and down that you can work with and be fine. So tow bars like the Blue Ox part # BLU37TR isn't adjustable vertically but that's what high low adapters were designed for as they compensate for height differences.
I attached a link to a page that details how to pick out a high low adapter as well as a link to all of the ones we offer. view full answer...
Go To Results