Hey Rick, thanks for reaching out!
As long as you have the extra space for a larger water tank you can definitely use it. For example, the 15 Gallon Valterra RV Water Tank # R8030 measures 30" long x 8" wide x 16" tall overall so you'll want to measure under your Coachmen to make sure this will fit. view full answer...
Hey Tony, thanks for writing in, and that's a really smart question. The answer is yes, the fresh water tank should be full when adjusting the 16,000 lb Equal-i-zer Weight Distribution System # EQ90-00-1600.
What you want to do is have the trailer loaded up just like it would be when travelling to ensure you get the proper adjustment and full benefits of the hitch.
As an aside, if you don't already have a hitch ball for the # EQ90-00-1600, the right one is the 2-5/16" Hitch Ball for... view full answer...
Hey Randy! That is correct, one side of the # BM44YR is for the city water and the other side is the fresh water holding tank. This is designed to fit B&B models 94405, 94406, 94407, 94408, 94447, 94448, 94409, 94410. view full answer...
Hello Joanne, thanks for reaching out. The Valterra RV Water Tank # R8036 can be used as a gray water tank if you want to. You may need to add your own fittings, depending on what kind of setup you are doing. Also, you may want to consider installing the tank at a very slight angle so that water can flow towards the drain. The bottom of this tank is flat, unlike most gray water tanks.
Comment below and let me know if you need anything else. view full answer...
Hey Odie, the fitting size for the water inlet for the # DOM93FR is the standard 1/2 inch NPT that is common on RV toilet water lines. view full answer...
The Dometic RV Water Heater # DMC74FR is the only non-tankless option that we currently offer. RV water heaters have dropped in size quite a bit the last few years so you'd likely have to do a bit of framing in order to mount this unit. This system only comes with a 6 gallon tank and requires 120v power so you'd be sacrificing efficiency and might have to run a new outlet if your previous unit used 12v power.
Most manufacturers are transitioning to tankless but I believe you can still... view full answer...
Hello Samuel,
I was not able to find the Valterra Bladex Waste Valve Body for RV Black Water Tank w/ Drilled Stem - 3" Diameter # T1003DSPB (129147-01-000) with the 36" cable, so I reached out to our friends at Valterra. They informed me that they do not have the 36" cable, but you can get the Valterra Cable with Valve Handle - 72" # TC72PB and cut it down to size.
My apologies for the delay in getting an answer, we had quite the spike in questions and are getting caught up.
Are you... view full answer...
Hi Kris; I'm not sure if it is the city water or gravity fill inlet but we have options for both. I don't have a way to know for sure what is on the 2025 Coachmen Apex Nano 194BHS but I it looks like they're separate black recessed inlets.
For the city water you could use the Valterra RV Water Inlet # A01-0178LFVP which has a 2-3/4" recessed metal flange. For the gravity fill we have the Valterra RV Gravity Fill Water Inlet # A01-2003BKVP which fits a 3-1/2" cutout with an overall diameter... view full answer...
Hey David, thanks for reaching out. Atwood water heaters have been discontinued for quite some time as Atwood is no longer in business. We do still carry a water heater with a 6 gallon tank, the Dometic # DMC74FR. Even standard water heaters like this are getting rarer because most people are switching to tankless. That's what I highly recommend checking out to save energy and get instant hot water, and you can replace the Atwood with the Furrion RV Tankless Water Heater # FR68SR. just... view full answer...
Hey Steve, thanks for the photos!
The Bristol Waste Valve for RV Black Water Tank - 3" Hub to 3" Lug # 34466N5A will definitely fit in place of your current valve, but it comes with 4 lugs instead of the 3 that you said you have.
From the photos you sent in you should be able to use this 4-lug system, but if not, the Valterra Bladex Waste Valve Body # T1003VPM will sandwich between the ends that you currently have so you can just reuse them. view full answer...
Go To Results