Hey Tom, yes the Valterra PVC Tubing for RV Fresh Water Systems # W01-1600PB will replace the hose you have from your fresh water tank to the water pump. view full answer...
Hey Robert, so for what you are planning you would want to stick with the Camco TastePure Dewinterizer part # CAM40207 and not the # CAM40206. Is there a reason you were wanting to use this instead? view full answer...
Hey Dave, we have the 96 inch long cable part # TC96PB you can use with the Valterra Cable Drain Valve # VAL72RB that you referenced. view full answer...
Hi Maria,
A water hose that is white with a blue stripe generally indicates it is a drinking water/fresh water hose. These will connect to your trailer's city water inlet, which is what I believe you were referencing, and we have a number of different lengths to choose from:
- 10 Feet: AquaFresh High Pressure Drinking Water Hose for RV # W01-5120
- 25 Feet: AquaFresh High Pressure Drinking Water Hose for RV # W01-5300
- 50 Feet: AquaFresh High Pressure Drinking Water Hose for RV # W01-5600 view full answer...
Hey Thomas, yeah you could install and use the Access Door for RVs part # 37210-31015 the way you described and it would work well. It is waterproof so in the future it wouldn't leak either. view full answer...
Hey Robert, the 6 gallon water tank part # R8012 that you referenced has ports that can be drilled out so that you can add fill or drain holes in several locations like you are wanting. view full answer...
Hey Velle, thanks for reaching out!
We have gas and electric water heaters like the Dometic RV Water Heater # DMC74FR, but to my knowledge none of the RV water heaters run off of pure electricity.
The Dometic one I referenced has a tank so I actually recommend replacing it with a tankless option like the Furrion # FR48SR which is much more efficient and powerful than the standard heaters that use traditional tanks on them. This Furrion only runs off of gas though so you won't be able... view full answer...
Hello Greg. We do offer one black water tank T-handle that is designed to work with an internally threaded shaft. It has a screw that inserts down thru the top of the handle. Take a look at the following:
Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves - Black Water Tank # 34490CMA1
This is designed to work specifically with the LaSalle Bristol Cable-Actuated RV Waste Valves such as part # 34466N4AB120GM. Generally, the handles are brand specific to the valve, and... view full answer...
Hey Murray, the RV toilets aren't ideal for houses because they normally dump (pun intended) straight into a black water tank right below the toilet so they don't use as much water as a house toilet that flushes more water to get through house plumbing. view full answer...
Tom, yes your tank needs to be empty before using the Dometic 3-in-1 RV Toilet Bowl Cleaner and Black Water Tank Treatment Packs # DOM82FR and will last about a week, but it depends on other variables. Like the amount of waste you expect this to handle, how big the holding tank is, how well the system is maintained, and if the proper paper products are used. view full answer...
Hello Jack,
The minimum opening water pressure of the Replacement Check Valve/Vacuum Breaker for Factory RV Tank Flushing Systems - 1/2" MPT # A10-3050 is 40 psi. view full answer...
James, we have the Valterra Bladex Waste Valve Body for RV Black Water Tank # T1003VPM which will work for your Forest River. This replacement valve will work with Valterra, Bladex, Bristol, and Anonda Valves, has a 3" diameter passage, and includes the seals, nuts, and bolts.
If you're looking for something else let me know, and I'd be happy to see what we have. view full answer...
Hey Kevin, thanks for reaching out!
You might need to swap out your water heater, but you also might just have a small part to replace. According to my research you'll want to check the anode rod, temp and pressure relief valves, the heating element, and other connections as well as if your tank is worn out in any places.
Let me know what you end up finding out, and if you aren't sure or you aren't confident in checking these things, then I recommend having a shop do it for you or seeing... view full answer...
Hey Wade, if you can see light through the opening of the valve with it in the "closed" position that would indicate it's not in good shape and in need of being replaced. Valterra valves like the part # T68C close all the way which is probably what your did when it was new. You might see if you can push the valve a little harder to see if will close further. view full answer...
Hello Rahn,
We definitely have something that will work for you.
You will need to buy the parts separately and put it together yourself, these are the parts you will need:
- Valterra Bladex Waste Valve Body for RV Gray Water Tank - Plastic Handle - 1-1/2" Diameter # T1001VP
- Valterra RV Sewer Spigot with Flange - MPT - 1-1/2" # T1008-1
- Replacement Cap with Strap for Valterra Gray Water Waste Valve - 1-1/2" FPT - Black # TSV6
Do you happen to have a picture of what the other (mounting)... view full answer...
Hello Jairo, thanks for reaching out. We do have tankless water heaters that can replace that Dometic GC10A-4E, but there is nothing that will be an exact fit for the opening.
For example, what I recommend is the Furrion RV Tankless Water Heater # FR68SR. The unit itself is 12-5/8" wide x 12-5/8" tall x 19-1/4" deep. So you would have to build out the inside of the cutout to properly house the unit. Tankless units are often smaller than the tanked units so modifying the cutout is a pretty... view full answer...
Thanks for the pictures! Sorry but the Lippert 360 Siphon RV Vent Cap for Black Water Holding Tanks item # LC389381 does not come in individual pieces. We do have it in black though item # LC389380. view full answer...
Hello Danny,
The Valterra E-Valve Electric Waste Valve for RV Gray Water Tank - 1-1/2" Hubs # VAL23MB is controlled by a rocker switch, which makes operating your RV’s waste system super convenient. You can mount the switch somewhere easy to reach inside your rig, and with just a flip, the valve opens or closes electrically. It's a really clean and user-friendly setup compared to traditional manual valves.
That said, it does have a manual override built into the motor assembly, just in... view full answer...
Hey Taylor, it looks like the Valterra EZ Valve part # E1003VP that you referenced uses 16 gauge wire but since I think 14 gauge wire is easier to work with that would be what I would go with. The amperage draw of this is pretty light so you wouldn't need to really worry about overdrawing the wiring either. view full answer...
Hello Carolyn. The Valterra Bladex Waste Valve Body # T1003DSPB you mentioned is designed to be used with a cable instead of a handle. If you want same valve but with a T-handle, you can use the following:
- Valterra Bladex Waste Valve Body for RV Black Water Tank - Aluminum Handle - 3" Diameter # T1003VPM view full answer...
Go To Results