etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3
(120 reviews)
Price: $23.50
In Stock
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3
Item # e46RR
Our Price: $23.50
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (120)
- Q & A (0)
- Photos
- Why etrailer?
etrailer Accessories and Parts - e46RR
- E-Track
- Tie Down Anchors
- E-Track Parts
- Backing Plate
- etrailer
- 6 Inch Wide
- 6 Feet Long
These steel backing plates for the 5' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.
Features:
- Backing plates provide extra support for your 5' E-track (sold separately)
- Perfect for use in an enclosed trailer with a thin wall or floor
- Multiple pre-drilled holes make plates compatible with horizontal or vertical E-tracks
- Galvanized steel construction is strong and corrosion resistant
- Simple, bolt-on installation with included hardware
- Attach each plate to E-track, evenly spaced, on the opposite side of the wall or under the floor
- Made in the USA
Specs:
- Quantity: 3 backing plates
- Dimensions (each): 6" long x 6" wide x 1/8" thick
- 4-Bolt mounting pattern: 4-1/2" x 4"
- Limited lifetime warranty
Note: The included hardware lets you mount your E-track on surfaces up to 2" thick.
These backing plates provide more support for your E-track (sold separately) than only using wood or metal screws. Simply put, they allow the pulling force to be distributed over a greater area. This prevents your mower, ATV, or other heavy object from pulling your E-track away from its mounting surface and tearing up your trailer's wall or floor. They're perfect for trailers with thin walls or floors.
Pre-Drilled Holes
Pre-drilled holes accommodate the standard 4-bolt mounting pattern found on most horizontal or vertical E-tracks. There are also holes to accommodate D-rings, Snap-Locs, and odd-shaped tie-down anchors.
Simple, Bolt-On Installation
To install, drill pilot holes in your mounting surface as close as you can to each end of your E-track and directly in the middle so that the plates will be evenly spaced. Place your E-track where you're mounting it and insert the included bolts. On the opposite side of your wall or floor, place the plates over the bolts and secure them using the included washers and nylon lock nuts.
e89RR etrailer Etrack Reinforcement Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3 - e46RR
Average Customer Rating: 4.9 out of 5 stars (120 Customer Reviews)
These steel backing plates for the 5' E-track in your enclosed trailer provide more support than just securing it with using wood or metal screws. Bolt each plate to your E-track on the opposite side of the wall or under the floor.by: Michael02/15/2023
I have had these installed on my utility trailer for a year. They were easy to install and do an excellent job holding my e-track and 1000 lb bike down. Well worth the price and the peace of mind knowing I am not just relying on some screws.
by: John P11/01/2022
The backers were substantial and provided a solid base for our winch and other attachments made to the inside of the trailer, would strongly recommend
by: Terry K06/14/2021
These E-tracks installed relatively easily on my new trailer using the available backing plates. Total install of 18' of track took less than 4 hours - a one man job except for the final tightening of the bolts included in the backing plate kit.
by: Tim 09/16/2022
Used them across the i-beams of my aluminum trailer and they worked great.
by: Jim 09/11/2022
Exactly what I needed. Great having all the hardware.
by: Russ 08/30/2022
Product works as described. Perfect for what I needed.
by: Steven 09/10/2021
This is the only way to go with a "thin" plywood floor! You could buy another e-track rail and chop it into backing plates, but then you don't have the hardware to go with it which gets pretty pricy.
by: Steve 09/07/2022
Nice product
by: Ron 10/14/2021
Backing plates worked perfectly and bolts were long enough to go through a 1 1/2 board
by: Neil 06/20/2021
You guys are great! Always seem to have just what I need, easy to navigate website, great customer service, lots of "How to" videos, and exceptional shipping department that jumps on it and gets me the product in near no time.
by: Joe C11/05/2021
Very pleased! Product was shipped promptly and I received exactly what I ordered. Thank you!
by: Richard in Hoschton, Ga10/07/2021
What I like the best is your customer service. I was missing 1 backing plate in my order, I called and talked to Adam and he got me taken care of ASAP.
Everything else was exactly as advertised on your website.
I really appreciate your instructional videos.
I have come to expect the very best from your products and will order again.
by: Robert 10/04/2021
Great customer service! You can tell from employees that people care at this company.
by: Ron 10/09/2021
Comments
Working as expected. No problems
Ron - 10/13/2022by: Nick10/11/2021
Great product & even better service
by: Bruce 09/19/2022
by: Jeff 01/02/2022
by: Shawn 02/23/2023
by: Chris 12/13/2021
by: Herman 07/28/2022
by: Gilbert 10/16/2021
by: Dave 11/14/2021
by: Nathaniel 10/26/2021
by: Louis 03/18/2023
Review from a similar etrailer Backing Plate in Accessories and Parts
Shipping was very fast even recieved before date due to arrive.Plates worked well with my DC Cargo vertical etracks. Good quality and was easy to install . Definitely would recommend when using on trailer deck or flooring that is 1/2 -5/8 thick .
by: LarryGC03/10/2023
Review from a similar etrailer Backing Plate in Accessories and Parts
Back plates are very easy to install as the holes are universal enough to fit about any pattern of bolting the tracks in place. They seem sturdy enough to get the job done. I cannot attest to how long they will hold up as I just installed them, but I would expect they will last a long time. However, I actually plan to seal mine with undercoating to ensure longevity.
25
115
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- Mounting E-Track to 2x8 Trailer Floor BoardsThe Buyers Products Horizontal E-Track - Gunmetal Gray Powder Coated Steel - 5' Long - Qty 1 # 3371903055 is 12 gauge steel and it can be screwed down directly to the trailer floor but won't have the same strength as if it were bolted through the floor. I recommend using wood deck screws that are 5/16 inch diameter and 1-1/2 inch length if attaching to the 2x8s. If you want a stronger connection, I recommend using the E-Track Backing Plate - Zinc Plated Steel - 6-1/2" Long x 6" Wide -...
view full answer... - What Is The Most Rust Proof Finish Available For An E-Track For Toy Hauler?Since you are wanting the most rust proof E-Track I recommend the etrailer Horizontal E-Track - Galvanized Steel - 2,000 lbs - 4' Long # e95VR as its galvanized finish will be the best for rust prevention, and will hold up fine even though you live near the ocean. If you are mounting the E-Track to the floor of your Toy Hauler I also recommend the etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3 # e46RR unless you are able to get the E-Track secured...
view full answer... - Number of Backing Plates Needed For 5 Foot Long E-TrackThat is a good question, and you will need to use three backing plates for each 5 foot section of e-track, so the exact part you will need is the following: - etrailer E-Track Backing Plates w/ Hardware - Qty 3 # e46RR These will fit perfectly with the 5 foot sections of e-track that we have, which are available in either galvanized or black powder coated steel: - Black Powder Coated Steel: etrailer Horizontal E-Track - 2,000 lbs - 5' Long # e25VR - Galvanized Steel: etrailer Horizontal...
view full answer... - How Many Backing Plates Are Needed For a 4 Foot Section Of E-Track?It is recommended to use 3 Backing Plates # e46RR on a 4' section of e-track. We have this length e-track in a Black Powder Coat # e85VR or a Galvanized # e95VR Finish.
view full answer... - Option to Haul Harley Trike in Enclosed TrailerIt will not; per B&W the Biker Bar will work with Harley-Davidson Tri-Glide and Free Glide up to model year 2014, but in later model years the emergency brake pedal interferes with the Biker Bar. What you may be able to use instead is E-Track # e85VR with Backing Plates # e46RR and tie-downs like # SLLS28RER.
view full answer... - E-Track and Parts Needed For Securing Motorcycles In a Enclosed TrailerYes, you can place the etrailer Horizontal E-Track # e25VR across your trailer from side to side. This will allow you to use the CargoSmart Motorcycle Wheel Chock # 3481731 making it easier and safer to secure your bikes in your trailer. Be sure to use the etrailer E-Track Backing Plates w/ Hardware # e46RR to secure each of the 5' tracks in place. Each of these kits includes 3 brackets for each track. I recommend using the Erickson E-Track Tie Down Rings # 59131 and ShockStrap Cam Tie-Downs...
view full answer... - Recommended Parts For Adding E-Track Rails To Detail K2 Mighty Multi Utility Trailer # K2MMT4X6I reached out to Detail K2 and they informed me they do not recommend making the tongue on their Mighty Multi Utility Trailer # K2MMT4X6 foldable. They said this will void all the trailer warranties. I recommend installing some etrailer Horizontal E-Track # e25VR on the floor of the trailer for attachment points. You will be able to fasten these to the underbed using the etrailer E-Track Backing Plates # e46RR. This will allow you to use a Tie Down Ring # 59131 with some traditional Straps...
view full answer... - What Motorcycle Frame Tube and Frame Width Do the B&W Biker Bar Motorcycle Tie-Down System FitThe B&W Biker Bar Motorcycle Tie-Down Systems we carry are only designed to fit certain models of Harley-Davidson and have not been tested for other bikes like your Kawasaki Vulcans. It is possible they can work with your bikes if they have double tubes but you will need to know a couple of dimensions, the frame tube diameters and the frame width. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 requires a frame tube diameter of 1-1/8" to...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Installed by:
Jeff D
Installed by:
Adam E
Video Edited:
Jacob T
Written by:
Matthew S
Edited by:
Daron K
Updated by:
Alex H
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.