Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop

See what our Experts say about this Equal-i-zer Accessories and Parts

• Weight Distribution Shank with 13 inches of Rise that Fits 2-1/2 inch Hitch
  Since you need right at 12.5 inches of rise based on the dimensions you listed the shank you need with your Husky weight distribution system to tow the trailer level is the part # EQ94FR which is capable of 13 inches of rise, fits the 2.5 inch hitch size, and is rated for up to 16k trailer weight. The shank is perfectly compatible with Husky weight distribution systems as well.
  view full answer...
• What Is the Minimum Drop of the 2.5" Equal-i-zer Weight Distribution Shank with 9" Drop
  The minimum drop of the Equal-i-zer Weight Distribution Shank part # EQ94FR is 4".
  view full answer...
• Length From Hitch Pin Hole To Adjustment Holes On Equal-i-zer 2.5" Weight Distribution Shank
  In regards to the Equal-i-zer Weight Distribution Shank part # EQ94FR, the distance from the center of the hitch pin hole to the center of the adjustment holes is 8".
  view full answer...
• Equal-i-zer Weight Distribution Shank For 2-1/2" Hitches
  The part number provided 90-02-4425 is a Equal-i-zer Weight Distribution Shank part # EQ94FR (our part number). This shank is 12" Long with 13" Rise or 9" Drop. It fits 2-1/2" hitches and has a 16,000 lb towing capacity.
  view full answer...
• Recommended Weight Distribution Shank for 2.5" Hitch with Extra Drop
  The Equal-i-zer Weight Distribution Shank part # EQ94FR is what I recommend using for a 2-1/2" hitch where extra drop is needed. It offers up to 9" drop which should be plenty for most truck and trailers combos. It's cross-compatible so it will work with pretty much any system.
  view full answer...
• Largest Size Equal-i-zer Weight Distribution Shank for 2-1/2 inch Hitch Size
  The Equal-i-zer weight distribution shank we offer with the largest dimensions is the part # EQ94FR which is 12 inches long and is capable of 13 inches of rise and 9 inches of drop.
  view full answer...
• Recommended 2-1/2" Weight Distribution Shank
  You do not have to use an Equalizer shank with an Equalizer weight distribution like item # EQ37061ET. However, for a long drop that fits a 2-1/2" receiver you are going to want to use the Equal-i-zer Weight Distribution Shank item # EQ94FR. This shank has a maximum tongue weight of 1,600 lbs and a maximum gross towing weight of 16,000 lbs. It has a 9" drop and extends 9" from the pin hole.
  view full answer...
• Equal-i-zer Weight Distribution Shank With 9" Drop And Tongue Weight Capacity Over 1,500lbs
  The Equal-i-zer Weight Distribution # EQ37121ET uses a shank that has bolt holes with a 1-1/4" height adjustments. The Equal-i-zer Weight Distribution Shank # EQ94FR would be ideal to use as it has a 9" maximum drop and fits into the 2-1/2" receiver on your 2019 Ram 2500. It has a maximum tongue weight of 1,600lbs and trailer weight of 16,000lbs. The Equal-i-zer Weight Distribution Shank # EQ34FR has a maximum drop of 12" or a minimum drop of 8-1/4". It has 4 different drop positions...
  view full answer...
• Can Equal-i-Zer System for 2 inch Hitch be Adapted to 2-1/2 inch Hitch with Shank Swap
  You will only need to replace the shank of your Equal-i-Zer system with one that fits the 2-1/2 inch hitch size and also provides you with the correct amount of drop to tow your trailer level. Thankfully the heads of weight distribution systems are all the same size and can be used with any hitch size as long as you match them to the correct shank. The shank part # EQ94FR is most likely the correct shank you'd need as it offers up to 9 inches of drop and does fit the 2-1/2 inch hitch size. Other...
  view full answer...
• Shank With Added Drop For Weight Distribution Hitch
  There is a shank with more drop that you can use for your weight distribution hitch; you didn't mention how much you need so I'll give you the options with the most drop. I'll also give you the options for both a 2-1/2 inch and 2 inch hitch so you can choose the size you need (both sizes will fit your weight distribution hitch). - 2-1/2" Hitch, Max 9" Drop: Equal-i-zer Weight Distribution Shank # EQ94FR - 2-1/2" Hitch, Max 12" Drop: Equal-i-zer Weight Distribution Shank # EQ34FR - 2"...
  view full answer...
• Weight Distribution Shank for 2.5 inch Hitch of 2021 Ford F-250
  You could use the Equal-i-zer shank part # EQ94FR with your 2.5 inch hitch of your 2021 Ford F-250 as it has a drop of up to 9 inches and also fits the 2.5 inch hitch size you have. This shank is perfectly compatible with your Pro Series as well.
  view full answer...
• Replacement Shank for Lower Trailer on Ford F-350 With 3" Receiver
  Currently there are no replacement drop shanks offered in a 3" receiver, but there are for 2-1/2". The Equal-i-zer Weight Distribution Shank # EQ94FR will give you 9" of total drop. If you already have a reducer for the 2" and are more apt to stay with that then the Equal-i-zer Weight Dist Shank # EQ90-02-4400 will provide you the same 9" of total drop.
  view full answer...
• Weight Distribution Shank w/ a 12 Inch Extension for a 2-1/2 Inch Receiver Hitch
  We have a 12" long weight distribution shank that fits a 2-1/2" hitch. It is the Equal-i-zer Weight Distribution Shank item # EQ94FR. This shank has a 13" rise and 9" drop. It has a maximum tongue weight of 1,600 lbs and a maximum gross towing weight of 16,000 lbs.
  view full answer...
• Drop Shank that Can be Used with Curt Trutrack Weight Distribution and 2-1/2 inch Hitch
  We have replacement drop shanks that you could use with your Curt system that would give you the drop you are wanting with the part # EQ94FR which can do a drop of up to 9 inches and was designed to fit a 2-1/2 inch hitch. This would be only component you'd need to go with to give you the additional drop you need and is compatible with both your Curt WD system and your 2-1/2 inch hitch.
  view full answer...
• Shank Recommendation for Fastway Weight Distribution for 2019 Ram 2500 with 2.5 inch Hitch
  Since your truck has a lift, and without a lift it sits up pretty high I would recommend a shank that fits the 2.5 inch hitch size with a bit more drop in the shank like the # EQ90-02-4900 which can do a drop of up to 6 inches or the part # EQ94FR which has a 9 inch drop.
  view full answer...
• Shank For Fastway e2 Weight Distribution That Fits 2-1/2 Inch Hitch Receiver
  There are shanks for your Fastway e2 weight distribution hitch that will fit your Ram's 2-1/2 inch hitch receiver, and what you can do is use one from Equal-i-zer, who manufactures the Fastway weight distribution systems. There are a number you can use, with differing amounts of drop. - Maximum Drop of 3 Inches: Equal-i-zer Weight Distribution Shank # EQ90-02-4700 - Maximum Drop of 6 Inches: Equal-i-zer Weight Distribution Shank # EQ90-02-4900 - Maximum Drop of 9 Inches: Equal-i-zer...
  view full answer...
• Availibility Of Shank W/ More Drop For Equal-i-zer Weight Distribution Hitch EQ64FR
  You sure can! The shank included with the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW # EQ64FR you were looking at only has up to 3" of drop so for more drop you can use one of the following shanks: 4" drop # EQ90-02-4800 6" drop # EQ90-02-4900 8" drop # EQ94FR Each of these shanks still work in a 2-1/2" receiver, it just comes down to exactly how much drop you need. I included videos of the products mentioned for you to take a look at.
  view full answer...
• Recommended Weight Distribution Hitch For 36' 2022 Palomino Puma Pulled By Lifted Ram 2500
  I recommend the Equal-i-zer Weight Distribution # EQ37121ET for towing your 2022 Palomino Puma travel trailer with your 2020 Ram 2500 Power Wagon. This hitch is rated for trailers with a tongue weight of 800-1,200lbs and total trailer weight up to 12,000lbs. To determine the correct drop shank you will need to measure the height of your receiver and compare that with the height of the coupler on the Puma. We have the following drop shanks that will fit your 2-1/2" receiver. 2-1/4" to...
  view full answer...
• Replacement Shanks for Fastway Weight Distribution for Use in 2-1/2 inch Trailer Hitch
  We have a few options for replacement weight distribution shanks that fit both the Fastway weight distribution system you have as well as the 2-1/2 inch hitch on your vehicle. We have the # EQ90-02-4700 which can do up to a 3 inch drop, # EQ94FR which can do up to a 9 inch drop, and # EQ90-02-4900 for up to 6 inch drop.
  view full answer...
• Recommended Weight Distribution Sway Control for 2020 Jayco Jay Flight SLX
  According to my research, the tongue weight of your new Jayco Jay Flight will be somewhere between 1000-1350 lbs, so you'll want to be sure to get a system that can handle that tongue weight. Also, because travel trailers are especially vulnerable to sway caused by oncoming or passing traffic, it's pretty crucial that you use a weight distribution system that has an integrated sway control component. I'd recommend going with an Equal-i-zer system like # EQ37141ET which is compatible with...
  view full answer...
• How Are Weight Distribution Shanks Measured
  Rise/Drop shanks like the Equal-i-zer Weight Distribution Shank # EQ94FR are measured from the top of the receiver opening and shank; this shank is 12" and provides a maximum of 13" of rise or 9" of drop when measured from the top of the hitch receiver. This is also the longest shank we currently have available for a 2-1/2" hitch, but you could use the Curt Weight Distribution Shank - 12" Long - 15-3/4" or 16-1/4" Drop - 1,500 lbs TW # C17125 with a sleeve reducer like the # C45405 to make...
  view full answer...
• Recommended Weight Distribution Shank With 9" Drop For 2-1/2" Receiver On 2017 Ford F-250
  I have another option, but after speaking with my contact at Fastway the Flash Solid Steel HD Adjustable 2-Ball Mount - 2.5" Hitch - 10" Drop, 9" Rise - 20K # FA49-00-5925 was not designed for use with a weight distribution system and as such I do not recommend doing so. For a weight distribution shank that has roughly the same drop and rise that will work with the 2-1/2" trailer hitch receiver on your 2017 Ford F-250 I recommend the Equal-i-zer Weight Distribution Shank - 12" Long - 13"...
  view full answer...
• Upgrading a 2 Inch Husky Centerline Shank to a 2 1/2 Inch Shank
  Reducer sleeves like the Curt # C45405 will work with weight distribution hitches, but I highly recommend using an anti-rattle device like the Roadmaster Quite Hitch # RM-062 with it. There can still be movement, however, so a new shank would be a better option. The Equal-i-zer Weight Distribution Shank # EQ94FR is rated to a maximum tongue capacity of 1,600 pounds and would give you a maximum drop of 9 inches. As you mentioned needing more drop that what came standard with your Husky,...
  view full answer...
• Replacement Drop Shank for Weight Distribution and 2-1/2 Inch Receiver
  The Reese Titan Weight Dist Shank - Trunnion Only - 5-3/4" Drop, 8-1/4" Rise - 1,700 lbs TW # RP54977 is a fit for your system. The Blue Ox SwayPro Weight Distribution Shank for 2-1/2" Hitches - 9" Long - 9 Hole Adjustment # BXW4028, the Curt Weight Distribution Shank for 2-1/2" Hitches - 12" Rise - 9-1/4" Drop # C17132, the Equal-i-zer Weight Distribution Shank - 2-1/2" Hitch - 12" Drop # EQ34FR, and Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop # EQ94FR are all...
  view full answer...
  

Do you have a question about this Accessories and Part?