Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
(11 reviews)
Price: $382.85
In Stock
Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
Item # BP18-045
Retail:$637.10
Our Price: $382.85
You Save: $254.25
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
Dexter Accessories and Parts - BP18-045
- Trailer Brakes
- Disc Brakes
- Caliper Parts
- Caliper
- Dexter
- 10000 lbs
- 12000 lbs
Caliper houses pistons in your hydraulic disc brake.
Features:
- Caliper holds and protects pistons for your hydraulic disc brake
- Pistons included
- Requires 1/4"-28 bleed port (sold separately - BP18-016)
- For use with 10,000-lb to 12,000-lb hydraulic disc brakes
- Made in the USA
089-002-02 Disc Brake Caliper for Dexter 10K & 12K Hydraulic Disc Brakes
Replaces BP18-045
Video of Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dexter Axle Trailer Brakes BP18-045 Review
Speaker 1: Today we're going to take a look at the disc brake caliper for the Dexter 10,000 and 12,000 pound hydraulic disc brakes. This part will include the caliper itself and the pistons, and this does require a quarter inch by 28 lead port, which we do sell separately on our website, it's part number VP18-016 and we do list that as a related product on this product page.But that should do it for the review on the disc brake caliper for the Dexter 10,000 pound and 12,000 pound hydraulic disc brakes.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Disc Brake Caliper for Dexter 10,000-lb to 12,000-lb Hydraulic Disc Brakes - BP18-045
Average Customer Rating: 4.9 out of 5 stars (11 Customer Reviews)
Caliper houses pistons in your hydraulic disc brake.by: Justin02/10/2023
Perfect fit exactly what I needed fast ship
by: Bob 03/13/2020
We had a customer stuck in Florida from Minnesota. We could not find any parts locally. etrailer had the parts in stock and was able to get them to me next day in the A.M. even though it was after 4 P.M. my time. They assured that would watch my order to make sure it was shipped. The staff is very friendly and had great knowledge of parts and great attitudes. THANK YOU!
by: Allen06/02/2018
Crystal, The calipers and pads you sent were the right fit, and good quality. Service was fast, you're the Best! Thanks!
by: 09/18/2022
by: Terry 09/15/2022
by: Dock03/06/2020
Exactly what I ordered and here in a very timely manner.
by: Trey 09/20/2019
Excellent service and a perfect fit!!
by: Nancy08/23/2019
Great service!!! Fast shipping
by: Adam08/24/2017
so far so good
by: Brandon 10/19/2021
by: Frank 12/21/2021
11
11
See what our Experts say about this Dexter Accessories and Parts
- Diameter of Pistons Holes for Pistons and Holes for Shoulder Bolts on Dexter Brake Caliper BP18-045I went out to the warehouse and pulled caliper # BP18-045 to measure it. The overall diameter of the holes where the pistons are is 3 inches. The piston diameter is 2-3/8 inches. And the shoulder bolts are 5/8 inch diameter and 5 inches long so the holes will be slightly larger at 0.63 inches. Since this caliper has a specific application, Dexter 10k and 12k disc brakes, I cannot gaurantee that it will work with any other system.
view full answer...
- What Hardware Is Needed To Install Disc Brake Caliper for Dexter 10K & 12K Hydraulic Disc BrakesThe Disc Brake Caliper for Dexter 10K & 12K Hydraulic Disc Brakes part # BP18-045 does not come with any hardware, it mounts to the caliper mounting bracket using the Replacement Caliper Retaining Shoulder Bolt part # BP18-105. The bolt threads into the caliper, there are no nuts.
view full answer... - What Hardware Is Needed To Install Disc Brake Caliper For Dexter 10K & 12K Hydraulic Disc BrakesThe Disc Brake Caliper For Dexter 10K & 12K Hydraulic Disc Brakes # BP18-045 does not come with any hardware, they mount to the caliper mounting bracket using the Replacement Caliper Retaining Should Bolt # BP18-105. The bolt threads into the caliper, there are no nuts needed. The bolts should not be tightened.
view full answer... - Replacement Parts for Dexter Disc Brake Caliper BP18-045We do offer replacement parts and repair kits for the Dexter Disc Brake Caliper # BP18-045. # BP18-016 Bleeder Screw # BP18-105 Shoulder Bolt # BP18-075 Caliper Rebuild Kit Dexter disc brake parts have a 5-year limited warranty.
view full answer... - How Many O-Rings are Used on Disc Brake Caliper for Dexter 10K & 12K Hydraulic Disc BrakesA caliper like the Disc Brake Caliper for Dexter 10K & 12K Hydraulic Disc Brakes # BP18-045 uses four of the # 010-062-00 O-rings. These are designed to go onto the brake caliper guide bolts, two for each bolt. If you need additional parts we have the Caliper Rebuild Kit for 10,000-lb and 12,000-lb Dexter Disc Brakes # BP18-075. This kit comes with the four O-rings, two piston seats, two boots, and a bleeder screw. I have attached a review video for your reference.
view full answer... - How to Install Replacement 11" Rotor for Dexter 10K or 12K Disc BrakesAttached is a photo of how the Replacement 11" Rotor for Dexter Disc Brakes # 070-006-01 that you referenced fits with the hub. To replace your brake pads # BP04-395 you need to remove the bolts holding the old ones in place, take the cap off of your actuator, then use an old brake pad or some other material with a clamp to push the pistons on the caliper # BP18-045 so that they are flush with the rest of the caliper. Once this is done you can then reassemble the new pads on the caliper...
view full answer...
- Dexter 12k Trailer Axle Calipers, Bolts, Brake Pads, Mounts and Hub Seal ReplacementFor Dexter 12k replacement brake calipers you'd want the part # BP18-045, for caliper bolts # BP18-105, for brake pads # BP04-395, for caliper mounts # KOD64FR, and for seals # 10-56.
view full answer... - Disc Brake Kit Availability for a Dexter 10k AxleThe Kodiak 10K Disc Brake Kit # K2R1058D11 is intended to allow conversion of a Dexter 8-288 idler hub for use with disc brakes. It is compatible ONLY with one specific hub, the Dexter hub 8-288 built between February 1990 and August 2009. What you can do is take off your hubs and measure the diameter of the spindle where the bearings and seal rides. If where the bearings ride is 2.250 and 1.750 and for the seal 2.875 this hub will fit. If your trailer already has disk brakes then you...
view full answer... - Replacement Caliper for Dexter Disc BrakesAs you may imagine there is really no way for us to know what disc brake calipers are on your 1999 trailer. We do have replacement disc brake calipers, but they are going to be specific to the weight rating of your Dexter disc brake assemblies, which means you need to match the weight rating of your assemblies to the replacement calipers. We have the following: - Disc Brake Caliper for Dexter 10K & 12K Hydraulic Disc Brakes # BP18-045 - Replacement Caliper for Dexter Disc Brakes - Left...
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.