Carr Grab Handle - Polished Aluminum Alloy - Qty 1

Video Transcript for Carr RV and Camper Steps CARR200032 Review

Today we're going to be taking a look at the grab handle from Carr This grab handle provides safety and stability wherever you need it, whether it's on your truck, trailer or RV. It's got a nice, secured grip design that's going to offer added safety so you can see all the finger indentions down here. That's just added grip. The unit's made from a rust proof cast aluminium alloy construction that's very strong and durable. It's got an XM3 polished finished, so it's not going to rust, crack or peel. Nice, strong, durable design that's going to last a long time. This is a bolt on installation.

Your mounting hardware is included. It's going to come with two carriage bolts that are 5/16ths of an inch, two flat washers, and then two nylon lock nuts. A few measurements to go over with you real quick, starting with the overall length. Measuring from end to end, the unit's going to give us a measurement of about 10 and 1/8th of an inch long. The overall height is about 2 and 7/8ths of an inch. The height right here, the gap from the mounting surface to the closest point of the handle, that's going to measure about an inch and a half.

The grab area, so measuring from this point here, to this point here, that's going to give us a measurement of pretty close to 5 and a half inches. The distance between our mount holes, measuring center on center is going to measure about nine and one quarter inches. The product is made right here in the USA, and it's going to be covered with a limited lifetime warranty. That's going to do it for today's look at the grab handle form Carr.