Bulldog Winch Power Interrupt Kit - Solenoid Activated - In-Cab Switch

Video Transcript for Bulldog Winch Electric Winch BDW20038B Review

Speaker 1: Today, we're going to take look at the Bulldog Winch Power Interrupt Kit. It is solanoid activated with the in-cab switch. Now, this solanoid-activated system with the in-cap control switch, this will allow you to turn your power on and off to your winch from the cab of your vehicle. It includes everything here on the table. A lighted rocker switch on the steel mounting bracket with the 10-amp circuit breaker, all the cables you need, the rubber covers, the solanoid itself, and the mounting hardware to install it.Now, on the solanoid we have this large two-gauge red power cable with the looped ends, and the rubber boot connects to the battery. You have the 20 gauge green ground wire and the boot, this is the solanoid to the battery.

The wires over here, you'll have a 14 gauge yellow power wire switch to the solanoid, you can see it's connected from the switch to the solanoid, and then the black and red wires are both 18 gauge, these are wires to the battery. Now, maximum amperage for this is 300 amps. But, that should do it for the review on the Bulldog Winch Power Interrupt Kit, Solanoid Activated with the In-Cab Switch.