Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the quick-attach handle on your Dutton-Lainson 2-speed winch (DL14521, DL14725, DL14881, or DL15502). Quick-attach handle measures 8-1/2" long.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Replacement Quick Attach Handle for Dutton-Lainson Two-Speed Winches. This replaces the Quick Attach Handle on your Dutton-Lainson Two-Speed Trailer Winch, part number's DL145211472514881 or 15502. A few measurements to go over with you real quick. You'll notice that it has plenty of offset here, so that way it'll clear any other components on the winch. The overall length measuring from very edge right here to the other end, that's going to give us an overall length measurement of about 9 and 3/4 inches to 9 and 7/8 of an inch. Then the handle radius, that measurement's taken from the center of where it mounts to the center of this hole to the outer edge of the grip area.The handle radius for this particular replacement handle, that's going to give us a measurement of about 8 and 3/4 of an inch.
Then the grip, it has multiple indentations here for a nice easy-grip design for your fingers, rotates 360 degrees, and then that grip has a length measurement, just measuring that black plastic portion, of four inches. Once again, this is the Quick Attach Handle. To place it on your winch, all you got to do is snap it into place and then when you want to take it off or switch the shafts so you can shift between speeds, all you got to do is push it in there to disengage. So push that in, disengage it, and move it to the shaft or gear that you need for your application. That's going to do it for today's look at the Replacement Quick Attach Handle for Dutton Lainson Two-Speed Winches..
Average Customer Rating: 4.9 out of 5 stars (44 Customer Reviews)
Replaces the quick-attach handle on your Dutton-Lainson 2-speed winch (DL14521, DL14725, DL14881, or DL15502). Quick-attach handle measures 8-1/2" long.Excellent service and very reasonable shipping to Canada. They'll get more orders from me for sure. This handle was not quite correct for my 1973 DL 2 speed winch, since the offset was about 1/2" too small, but a little cutting on the shafts will solve that. Also the lock-on feature will need some fiddling to make work. Not eTrailer's fault though, since my winch is not supported any more and I expected some fitment issues. The handle to shaft-hole dimensions were exact though, which was the crucial requirement.
Quick accurate service, good price, good delivery.
I had to repurchase the handle because is was lost. The entire winch is top notch.
I generally use the 20 volt drill to pull the boat on the trailer. Works like a dream.
Using the crank handle is for the young guys. Great product.
Robert
6/23/2019
Love it. Works great. No issues. I lost the original handle because it was not snapped in properly, My fault. I drilled a small hole thru the handle arm and attached a lanyard with a clip. No more lost handles.
The handle for the winch came as advertised and matched up with the information provided by etrailer.com. I was most impressed with the customer service that was provided. George emailed me when they received the order, when they had shipped the order and then after they received conformation that the order was delivered. It is a handle for a winch and cost less than $15 so the level of customer service was a surprise.
Thank you
Part is great, fit my 1970 s winch. Haven’t had a handle since the 80 s. The service is was excellent, part shipped the same day and arrived in two days. I am very impressed. Will use them for my next order. Thanks.
Dean W.
11/18/2021
Still working well
Great service ... Thanks ...
I am really happy to have been able to replace the handle on my boat winch. The prior one broke and fell off in transit. Even better, I had a choice of size. The old one was too long and would hit against the bow stop. This one is just a bit shorter and we no longer have that problem.
Needed a new winch handle for my shore landr boat trailer. Worked great. Wasn't sure if the hole size would match the pin as there was no dimensions posted online but it fits perfectly. Thank you for the quick service
It's exactly what I thought I ordered for here fast and fits as expected.
Got my new handle. Fits like a charm. Lost my old one on the way to lake or someone took it out of my driveway. Easier to launch and retrieve my boat with a winch handle. New one is going in the truck or boat when not in use.
Prefect replacement for my 1995 Boat trailer winch.
It was exactly what I needed and it works fantastic! Thank you very much!
Works perfect
William
6/24/2024
I had forgotten about buying this...because it has done its job trouble free.
part worked great , fixing to order anorther one for a spare
Capn M.
12/24/2022
Still CRANKIN!!!
Handle fit perfectly also fast ship
Great product as advertised! Customer service was excellent!!!
Part came fast and was exactly what I ordered! Will definitely be ordering from them again!!!!
I have order the same product in the past, works great no issue. Shipping arrived as expected
Amazing customer service
Item was as described, shipping was fast. Great deal all around.
Works perfectly
Great product
Excellent shipping service, easy to use website, I would highly recommend these guys!!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeremy C.
2/12/2024
Perfect. No issues.