Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long

Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long

Item # W787264

lowest price pledge

Retail:$21.30

Our Price: $13.60

You Save: 36%
Wiring

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.52 lbs

Quantity: 
In Stock, Ships Today
Wesbar 4 Feet Long Wiring - W787264
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Trailer Connectors
  • Trailer End Connector
  • 4 Flat
  • Plug and Lead
  • Wesbar
  • 4 Feet Long
This 4-wire flat, trailer-end connector includes a 4' long, jacketed cable with stripped, color-coded wires for easy installation. Lowest Prices for the best wiring from Wesbar. Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long part number W787264 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (86)
  • Q & A (38)
  • Videos (2)
  • Photos
  • Why etrailer?

Wesbar Wiring - W787264

This 4-wire flat, trailer-end connector includes a 4' long, jacketed cable with stripped, color-coded wires for easy installation.


Features:

  • 4-Way flat connector provides a male plug for your trailer
  • Jacketed cable protects wires against the elements
  • Color-coded, stripped wires ensure simple installation


Specs:

  • Wire length: 4'
  • Wire size: all four are 16 gauge
  • Wire configuration:
    • Yellow: left turn and stop lights
    • Green: right turn and stop lights
    • Brown: tail, license, side marker and clearance lights
    • White: ground wire
  • 1-Year limited warranty


787264 Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long






California residents: click here


Video of Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Wesbar 4-Pole Flat Connector Installation

Today on our enclosed trailer, we are going to be installing the Wesbar 4-pole flat connector which jack and a cable, part# W787264. We are going to begin here by removing the old 4-flat that is on this trailer. We are just going to cut it out of the way as we won't be reusing any of the old wiring. We are going to be wiring the 4 wires here into this junction box that is already mounted onto the trailer, and the other end will route up towards the jack area of the trailer. We will go ahead and remove the cover of the box. Next we are going to go ahead and take our 4 wires here and feed it through the grommet here on the box. We'll go ahead and strip back a little wire from each of the 4 and add in our ring terminal. We'll need to go ahead and add them to the appropriate stud.

We'll be matching up color per color. Next, we are going to install this little bracket here with these 2 screws to make sure that this wire doesn't move in and out of our junction box. Once our screws are in place, we'll go ahead and tighten them down. Now we will go ahead and put the cover back on the box, take the other end of our 4-flat here and pull it up towards the jack area, and then we're going to use a couple loom clamps to secure the wire to the trailer frame. The loom clamp we will be using is part# A0500. Now that we have our wires secure, we'll go ahead and plug it into our tester.

Now if you don't have a tester, you can just use your tow vehicle to check to make sure everything is working properly. Now we will go ahead and turn on our running light circuit. Next we will go ahead and try the left blinker. Now we will go ahead and move over to the right side blinker. Now we will go ahead and check the brakes. That will do it for the installation of the Wesbar 4-pole flat trailer connector, part# W787264 on our enclosed trailer.

.


Customer Reviews

Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 4' Long - W787264

Average Customer Rating:  5.0 out of 5 stars   (86 Customer Reviews)

This 4-wire flat, trailer-end connector includes a 4' long, jacketed cable with stripped, color-coded wires for easy installation.

- W787264
by:

I have been very pleased with etrailer orders recently. Everything shows up when expected and products are as expected. Attached are a couple before and after pictures of my recent project to add lights to a cargo rack per my wife's request. Thanks for the professionalism of all at trailer 153684



- W787264
by:

Replacement plug is working great. The sheath cover over the actual wires should make it last along time. Easy install with heat shrink connectors I had on hand. great product at a great price. Thank you James. 655716



- W787264
by:

Very well made. Sturdy. Should last a long time. 654247



- W787264
by:

Parts and delivery were exceptionally g reat. 649562



- W787264
by:

Grate Product 642425



- W787264
by:

Heavy duty, worked out perfect 627948



- W787264
by:

An AWESOME product!! Received very quick. Got my trailer back on the road in time for my friend to use to move. Thanks. 617594



- W787264
by:

great product heavy duty, no problem with installation, very easy to work with 605993



- W787264
by:

I have ordered a couple things from etrailer.com com now. I set them up in my browser favorites as my "Go To" trailer parts. I am not sure how big of a company it is, but the personal customer service is exceptional. In addition to just overall service, the product itself is exactly what you should expect it to be. Every item I have order as been perfect without defects. I have not found any other sites with service like this. Thanks George. 567233



- W787264
by:

Great product 564020



- W787264
by:

cheap wires keep breaking and giving you grief,, very pleased with this one, well built. 554844



- W787264
by:

Delivery was quick and electeical was just what I was looking for. Was able to mount bracket to hitch and running the wiring was easy with it all color coded. The single sheathed trailer plug was also what I was looking for and priced below anywhere else. Was very industrial and was almost an exact match to replace the existing one on my triton trailer. 553765



- W787264
by:

I really cannot grade the product as I never got to use it. The trailer where the wiring harness was needed ended up being in worse condition than I thought and got recycled. As far as customer service, you were great. 544757



- W787264
by:

Looks good quality, hope it last. 510727



- W787264
by:

Good quality flat connector with 16g wire to upgrade lighting on trailer 506309



- W787264
by:

Nice heavy duty cord and plug- much thicker than the previous unit on my trailer. 502210



- W787264
by:

I bought two of these previously and liked them so much that I bought 3 more. 16 gauge wire is way heavier than most trailer plugs/harnesses come with, plus the plugs are heavier duty and the cable is clad in heavy rubber for protection. I would buy more but I only have 5 trailers at the moment. 489442



- W787264
by:

I bought this to replace the one that came on my boat trailer. This is a good quality cable and molded connector. I'm sure that if I am careful with it , that it will last for as long as i need it. I have bought a number of items from etrailer and have yet to be disappointed. Good stuff, good service. 470969


Comments

Looks like it did when I installed it, good stuff. Much better than what came on it from the factory. Well pleased.

jimmy m - 01/29/2019

49051

- W787264
by:

Bought as a replacement. Great price! 468919



- W787264
by:

great product, great price and fast shipping. I will buy again... very pleased thanks etrailer. 463255



- W787264
by:

This is a quality product. Fair price and prompt shipping. This is SOP for ETRAILER. 443330



- W787264
by:

High quality. quick service. 432577



- W787264
by:

Very helpful service and quick delivery 428761



- W787264
by:

Just the item I needed to improve my tr ailer. 414417



- W787264
by:

great product. I have bought three of t hese. 408025



- W787264
by:

Working as it should. No problems 401973



- W787264
by:

High-quality piece. I chose this connector over the cheaper alternatives because it looked sturdy and the wires are covered. Due to the condition of the previous connector the covered wires for my boat trailer were the way to go. I was able to install this with no problems and it works great! Also, the length was a big upside and I can make left turns with the trailer without worrying that the connector is going to pull out! 396109



- W787264
by:

Great product 392394


Comments

This has proved to be a high quality connector. No problems whatsoever.

Gerry W - 06/12/2018

39643

- W787264
by:

The spring loaded connector cover on my 2014 Ram pickup was pressing so hard on my 4 prong plugs that it was breaking the conductors inside the insulation, right at the entry to the connector. I switched to using the 7 prong socket and bought a 7 - to - 4 - pole adaptor. As added insurance I added these heavy duty connectors with heavy gauge wire pigtails. Great quality on these, and a nice 4 foot pigtail clad in heavy rubber to protect from sun and other damage. Bought 2, and will be buying 4 more from etrailer for my other trailers. Fast ship from etrailer, too. 390566


Comments

Great quality and heavy duty wire. Ive bought 6 of these and Im replacing all of my trailer plugs as time permits.

Norm C - 06/09/2018

39524

- W787264
by:

The cable was exactly as advertised and delivered on time. 386663



- W787264
by:

Everything works well. I will definitely order form etrailer again when I need stuff. 379544



- W787264
by:

Product was shipped quickly, arrived fast and packaged well. I was very satisfied with the hole experience!!!!!! 377966



- W787264
by:

product was just as it was described and was delivered quickly. great company to work with 373925



- W787264
by:

Great communication and assistance. Filled my needs very well. Thanks 373237



- W787264
by:

Makes for a nice, clean hitch wiring. 365038



- W787264
by:

I like how the cable is protected by the molded in insulation, not just the 4 flat wires. 364661



- W787264
by:

Easy to install, use it to pull a utility trailer with 2001 Chevy S10 fits Perfect 345671



- W787264
by:

I have used errailer at different times. Each time their products have been the absolute best. Their phone clerks are knowledgeable of product and service. Shipment time has always been extreamly prompt, sometimes as little as 2 days, retailer is unaware that I grew up in a fleet service shop, I owned and operated my own for 20plus years. I also have a [retail] store that uses their service, a simple ITS THE BEST is all I should say! 343777



- W787264
by:

I needed a good quality 4-way pigtail to change my trailers from the 7-way pick-up end. I want to tow my trailers with my Cadillac SRX, so I changed the ends. This is a good dependable 4 foot long cable, so I purchased a total of four of them! 335086



- W787264
by:

Fast service, quality product 328057



- W787264
by:

This is the best 4pin flat connector anywhere. It will eleminate the broken wires that happen with the cheap auto store trailer connectors. Well worth the extra money 322480



- W787264
by:

Product was better than expected. Not your fault but the shipping with USPS was terrible. It bounced all over Idaho before they found our town. Thanks again for the product. 320426



- W787264
by:

Great product, perf ct replacement part 314299



- W787264
by:

Exactly what I needed for the install. This is a large improvement over the 4 conductor unsheathed cable that was original equipment. 309822



- W787264
by:

Item was as described. Heavy duty shielded cable and wiring. Very happy with purchase and communication. 309082


Comments

Trailer wiring cable is holding well. I would recommend this product to others

Roy G - 10/23/2017

29729

- W787264
by:

My jetski trailer had gobs of wires wrapped around the trailer tongue, there were wires for the rear lights and side markers. I cut them all off and spliced this in with all the splices now shoved inside the tongue and this wire leading out. I now have a single wire connection to my vehicle. 306113



- W787264
by:

Perfect in every respect. Integrated into a Honda Civic wiring harness for Break llight, LT, RT, and running lights. 298121



- W787264
by:

Second one of these connectors I have ordered. Heavy duty and keeps the wires from deteriorating from the weather. 288160



- W787264
by:

Quality of trailer wire connecter was beyond expectancy. I'll be buying all my boat trailer items from you! Note-my boat-buddy is working fine, thanks for helping me with my orders, and your friendly personality Emily. The super fast delivery is greatly appreciated too! Ron C 7/11/16 (my birthday) 270644



- W787264
by:

Excellent Quality 262883


51
87
Show More Reviews

Ask the Experts about this Wesbar Wiring
Do you have a question about this Wiring?


  • Ways to Install New 4-Pole Trailer Connector
  • Four flat trailer wiring, also called 4-pole wiring, uses four wires and pins configured as shown in the linked photo of a trailer side 4-pole connector. The one pin that is different from the other three (on both trailer and vehicle side connectors) will be the ground pin and this usually has a WHITE wire that will ground to a clean bare metal spot the trailer frame with a ring terminal. The next pin is for the running light circuit and this typically uses a brown wire to activate...
    view full answer...

  • 4-Way Trailer Wiring Recommendation that Uses all 16 Gauge Wires
  • For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector # W787264. The part # HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.
    view full answer...

  • Vehicle Side 4-Way Trailer Connector that is 4 Feet Long
  • The Hopkins Endurance Easy-Pull 4-Pole Connector # HM48044 is a 4 foot long vehicle side 4-way trailer connector. It isn't exactly like the Wesbar # W787264 but it is the opposite end and the same length so it will work for you.
    view full answer...

  • How to Make Adapter to Go From 7-Way of Semi Truck to 4-Way
  • The problem with semi truck 7-ways is that they have the turn signals separated from the stoplights so you end up with needing a converter installed on the adapter too so that the signal matches the trailer lighting. If this is the case you can build an adapter using the part # RM-732 as a signal converter. You will need a round pin male connector, # PK11702 and then the part # W787264 for a 4-way. Basically you will be splicing the converter between these two to create the adapter. The...
    view full answer...

  • How to Install a License Plate Light on a Cargo Carrier for Use in California
  • I believe I have a solution for you, but it will require you to install trailer wiring on your 2010 Toyota Prius. For trailer wiring you will want the Tow Ready wiring harness part # 118505. This will give you a 4-way with a running light circuit that you could use to power a light for the license plate that would only come on when your headlights are on. You will then have to mount a lighted license plate bracket on your cargo carrier like the part # LPL55CB. You will run the black...
    view full answer...

  • Replacement Trailer Side 4-Pole Connector for Boat Trailer
  • We do offer replacement trailer-side 4-pole wiring kits that you can use to replace the damaged one on your boat trailer. For a trailer-side 4-pole we offer various lengths, such as the 4-foot Wesbar # W787264, 8-foot harness # W787268 and 14-foot # W787274. The Hopkins part # HM48240 that you referenced is a similar 20-foot harness. This features a wishbone construction, which means dual running light wires so that there is one for each side of the trailer. We also have a 35-foot long...
    view full answer...

  • Gauge Wire Used for the Hopkins 4-Way # HM48235
  • The Hopkins part # HM48235 has 16 gauge for wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector # W787264.
    view full answer...

  • How to Make a 7-Way Round Separate to 4-Way Flat Combined Adapter for Trailer Wiring
  • Semi trucks can sometimes have different trailer wiring setups. I would be willing to bet that your Volvo has separate turn signals from stop lights and the problem is that the 4-way is designed for combined circuits where these signals are both on the same wire. If this is the case you can build an adapter using the part # RM-732 as a signal converter. You will need a round pin male connector, # PK11702 and then the part # W787264 for a 4-way. Basically you will be splicing the...
    view full answer...

  • Is 16 Gauge Wire Adequate for Trailer Wiring for Lighting
  • Most trailer wiring that runs to trailer lights is 16 gauge. I would rather people use 14 or 12 unless the lights are LED which draw considerably less. But for most people 16 gauge works just fine for basic trailer lighting. If you are planning on running several running lights or just more lights in general you would want thicker wire. I attached a help article on trailer wiring for you to check out as well.
    view full answer...

  • What Gauge Wire does 4-Way Trailer Wiring Use
  • Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector # W787264. The part # HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.
    view full answer...

  • How to Wire Up a Trailer with Separate Taillights to a 4-Way
  • You are going to need two thing, a taillight converter like part # 118158 and a trailer side 4-way like part # W787264. You will need to cut the connector off of the trailer and then wire the # 118158 to the trailer wiring like the diagram I attached to the right shows and then wire the # W787264 to the wires on the input side of the converter.
    view full answer...

  • How To Add Tail Lights To a Bike Rack
  • In order to create a wiring harness for the two Thinline LED Trailer Tail Lights part # STL59RB I recommend using the Wesbar 4-Pole Flat Connector part # W787264 along with the Deka Heat Shrink Butt Connectors part # DW05744-5. The white wire on each light as well as the trailer connector will need to be run to a bare metal surface. The black wire for each light can be combined and run to the brown wire on the trailer connector. The red wire for each light can then be run to the yellow...
    view full answer...

  • Is there an Adapter that will Convert a 4-way Round Trailer Connector to a 4-way Flat Vehicle End
  • I have checked the adapters that we currently carry, and we do not have an adapter that will fit the configuration that you specified. You could create your own adapter, and it would be composed of the Pollack # PK11410 and the Hopkins Endurance 4-way Flat Trailer connector # HM48110. You would just wire the Hopkins 4-way flat to the Pollack 4-way round connection point. This will create an adapter that will connect the 4-way round on your 1972 trailer with a 4-way flat vehicle connection...
    view full answer...

  • 4-Way Recommendation Where all 4 Wires are 16 Gauge
  • I spoke with my contact at Hopkins and they informed me that the Hopkins Endurance 4-Way Flat Trailer Connector # HM48110 that you referenced has 16 gauge for the white (ground) wire and 18 gauge for the rest. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector # W787264.
    view full answer...

  • What Is the Wire Gauge Size On Wesbar 4-Pole Flat Connector # W787264
  • On the Wesbar 4-Pole Flat Connector, part # W787264, the wire gauge size is the same on all 4 wires. It is 16 gauge wire.
    view full answer...

  • How To Connect Vehicle 4-Flat Connector To Loose Trailer Wires
  • It sounds like your truck has a 4-way flat trailer connector with yellow, green, brown and white wires (see picture), which is pretty standard. It also sounds like your trailer has 5 loose wires that you are trying to connect to a trailer side 4-way flat connector similar to part # W787264. If this is the case, then it sounds like your trailer came with a wishbone style wiring harness meaning you have two running light wires (brown wires) for each side of the trailer, the left turn...
    view full answer...

  • How to Confirm Trailer Wiring Configuration to Match 2007 Jeep Grand Cherokee
  • Trailer wiring often uses a particular wire color for a particular function, such as a white wire for ground, but there is no absolute rule that this will be the case. For this reason testing with a circuit tester like # 40376 is recommended. In the case of a trailer you can use a spare battery (or your Grand Cherokee battery) to test each trailer circuit to see what light activates with the 12V input power applied. The linked trailer wiring article illustrates the various connector...
    view full answer...

  • Oval Trailer Light for Use on the Back of a 2016 Ford F-250
  • If you want the light to plug into a 4-Way flat connector on your 2016 Ford F-250 then I do not recommend # STL211RB because it has a reverse light function and the reverse light circuit is not carried in the 4-Way. I recommend flange mount light # STL78RB which does have stop, tail, and turn signal functions. Keep in mind that trailer lights only have 1 input for turn signals so if you were to wire in that corresponding wire to the green and yellow wires on a trailer side 4-Way then...
    view full answer...

  • Determining Wire Function On Boat Trailer With No Trailer Connector
  • It sounds like someone ran the wires as what we call a wishbone. The only way to tell how the wiring is connected to the lights is to use a 12V battery and a circuit tester like part # 40376. Attach the white ground wire to the battery negative terminal and then one by one connect the other wires to the positive terminal. You can have someone watch the trailer lights while you do the testing to determine what function each wire carries. Depending on how many lights you have on the trailer...
    view full answer...

  • Replacement 4-Way Recommendation for Trailer 4-Way with 7-Wires Ran to it
  • Sounds like each of the taillight circuits on your 4-way have a two wires ran to them for each side of the trailers wiring. This is pretty common and what you can do is wire the two wires of each pin to the single wires of a new 4-way like the # W787264. That will allow all of the same circuits to get the same signal.
    view full answer...

  • Recommended Adapter To Plug 4-Way Harness On 2008 Toyota RAV4 To 5-Way On Jayco Pop-Up
  • Thank you for the photo of the connector on your trailer. That really helps when we are trying to find a solution for someone. Chances are you have a Jayco trailer and we have an adapter, part # 30104 that allows you to use the 4-way connector you are installing on your RAV4 and just plug it into the adapter in the photo. If that does not work I recommend re-wiring the trailer and adding a 4-way harness on the trailer like either part # W787264 or part # W787268. You would then...
    view full answer...

  • 4-Way that Uses 16 Gauge Wire to Match 4-Way Bonded Wiring 16-4B-1
  • For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector # W787264 to use with the part # 16-4B-1.
    view full answer...

  • How to Wire the GloLight LED Trailer Tail Light Part # STL178RB to a Trailer Connector
  • The white wire on the back of the GloLight LED Trailer Tail Light part # STL178RB is for the ground. If you were wiring it to a trailer connector like part # HMC20031 then you would just need to make sure that it is attached to the ground terminal and no additional grounds would be needed. The outer ring of the light that you are referring to is made of plastic just like the body of the light is. The wire leads are around 6" long. I have attached a review video for you.
    view full answer...

  • Gauge of Wire that is Used on the Hopkins Endurance 4-Way Flat Trailer Connector # HM48110
  • I spoke with my contact at Hopkins and they informed me that the Hopkins Endurance 4-Way Flat Trailer Connector # HM48110 that you referenced has 16 gauge for the white (ground) wire and 18 gauge for the rest. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector # W787264.
    view full answer...

  • Wiring In Trailer 4-Way to Trailer with White, Brown, Yellow/Beige and Green/Beige Wires
  • Your trailer wiring is pretty standard in colors so it would be pretty easy to wire up a standard 4-way to it. The colors would mainly match but where you have a yellow/beige you'd just run the solid yellow to it and the green/beige would get the solid green ran to it.
    view full answer...

  • Recommended LED Tail Lights For Hitch Mounted Carrier On 2007 Honda Element
  • The LED lights I recommend for your carrier is part # STL76RB. these lights feature the stop, turn, and running lights and have 11 LED lights. This light has an overall measurement of 13.26 inches long, 2.13 inches tall, and 1.42 inches deep. You will need to splice into the wires on the lights once they are installed. I recommend using a trailer-end 4-way connector for the lights like part # W787264. This has the 4-way connector that will attach to the trailer connector on your Element...
    view full answer...

  • Are the Wires of the Wesbar 4-Pole Flat Connector Color Coded
  • The four wires of the Wesbar 4-Pole Flat Connector # W787264 that you referenced are color coded by the standard 4-way colors. White is the ground, brown is the tail light, green is right turn and stop and yellow is left turn/stop. The wire is also stranded and not solid core. I attached an FAQ article on trailer wiring for you to check out also.
    view full answer...

  • Recommended Strobe Warning Light To Use While Snow Plowing
  • We do offer strobe warning beacon lights, and some are battery powered while others can be wired to a connector and used with your vehicle trailer connector. I recommend a light like part # STR16JP. This light has a 2-wire system with black being the ground and the red wire is positive. Since you want to use your trailer connector to operate the light you can wire this light to a 4-way connector like part # W787264. You would attach the black wire from the light to the white wire on...
    view full answer...


Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Written by:
Tyler C
Expert Research:
Jeff D
Expert Research:
Jameson C
Updated by:
Laura H
Video Edited:
Dustin K
Installed by:
Cole B
Photos by:
Amber A
Updated by:
Brian T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.