2 Wire Loop, 12"

2 Wire Loop, 12"

Item # 9651P

lowest price pledge

Our Price: $3.09

Wiring

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.05 lbs

Quantity: 
In Stock, Ships Today
Spectro Wiring - 9651P
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • Wiring Adapters
  • Single-Function Adapter
  • 2 Pole
  • 2 Pole
  • Plug and Lead
  • Spectro
  • 1 Foot Long
Lowest Prices for the best wiring from Spectro. 2 Wire Loop, 12" part number 9651P can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (10)
  • Q & A (12)
  • Videos (1)
  • Photos
  • Why etrailer?

Spectro Wiring - 9651P


Features:

  • 2 Pole Flat
  • Wire gauge: 16
  • 12" Loop


9651 2 Wire Loop, 12"







Video of 2 Wire Loop, 12"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Spectro Wiring - Wiring Adapters - 9651P Review

Today we're going to be taking a look at part number 9651P. This is Spectro two pole flat wiring extension. It's going to measure 12 inches long. It's going to be a two pole positive and negative wiring loop so it's going to supply your ground and power. The cord can be cut into two compatible plugs. That way you can create a plug-in connection for a hard wire 12 volt accessory such as a backup camera, a side marker light, a license plate light, reverse light, something that requires a ground and then power for one function. It's going to contain 16 gauge copper wire construction.

It's also going to feature the tin-plated terminals. It's going to stand up really well against rust and corrosion. Again, you're going to have an overall extension or length of 12 inches. That's going to do it for our review of part number 9651P. This is the Spectro two pole flat wiring extension.

.


Customer Reviews

2 Wire Loop, 12" - 9651P

Average Customer Rating:  4.7 out of 5 stars   (10 Customer Reviews)


- 9651P
by:

Product came yesterday in a very timely manner, product was exactly like it looks in picture, great quality and I have someone installing it as I type this. So a more in depth review later on when it is installed and I will send pictures. Also the staff at etrailer is awesome they do a great job with customer service! 299948



- 9651P
by:

Hard to find 2 terminal plugs except to cut them off an old wiring harness. Thanks for carrying them! 297300



- 9651P
by:

Great product !!!!! 248896


Comments

Great

Craig - 05/07/2017

23691

- 9651P
by:

Product arrived intact and will use your company again 240862



- 9651P
by:

It works as advertised! 221171



- 9651P
by:

Excellent adapter…I cut it half to use with my removable removable fenders being I mounted some extra tail lights on them for more visibility, worked out great! 220934



- 9651P
by:

As described, good connectors. 159676



- 9651P
by:

Good quality material,very handy.I will use it to connect led marker lites to a removable truck bed panel. 149834



- 9651P
by:

I needed two 12v leads to add backup lights to my trailer. Works great. Very tight connection. I cut it in half and connected one side to my trailers left and right backup lights and the other end to my truck. 108604



- 9651P
by:

Good Product. Does what we expect. 61293


10
10

Ask the Experts about this Spectro Wiring
Do you have a question about this Wiring?


  • How to Wire Illuminated License Plate Holder to Trailer Connector
  • To wire an illuminated license plate holder such as the Optronics LED # LPL55CB, you can simply splice into the running light circuit and ground wire from the trailer connector. I recommend using the 2 Wire Loop # 9651P to make these connections. This will allow for a quick and easy disconnect when you are not using the cargo carrier/rack on your trailer hitch. I have attached a couple of short video demonstrations on these products for you to check out.
    view full answer...

  • License Plate Bracket Recccommendation For Trailer Hitch Mounted Cargo Carrier
  • The legality of an obscured rear license plate varies from state to state. If you want to heed the letter of the law, the plate can be relocated to the rear of the cargo carrier. We sell quite a few cargo carriers, and to be honest, it is really not that much of an issue. You could zip tie the plate to your carrier, or use a bracket with a light like part # LPL55CB (In most states, the rear license plate is required to be lit after dark). If your vehicle has a trailer connector,...
    view full answer...

  • Does Vehicle License Plate Need to Relocated When Using Hitch Cargo Carrier
  • The legality of an obscured rear license plate varies from state to state. If you want to heed the letter of the law, the plate can be relocated to the rear of the cargo carrier. We sell quite a few cargo carriers, and to be honest, it is really not that much of an issue. You could zip tie the plate to your carrier, or use a bracket with a light like part # LPL55CB (In most states, the rear license plate is required to be lit after dark). If your vehicle has a trailer connector,...
    view full answer...

  • Proper Wiring of a Hitch-Cover Brake Light so it Does Not Blink when Turn Signal is Activated
  • If you want your hitch cover brake light to only work with the brake lights, I would recommend that you use a 2 Wire Loop, item # 9651P, to make a separate connector for your brake light hitch cover. Then run the white wire to ground and splice the red wire to the third brake light circuit which does not blink when the brakes are applied and the turn signals are activated. You will have a separate two wire connector for the hitch cover with this setup. At this time I do not know of...
    view full answer...

  • Can Extension Cord Be Used Between Solar Panel Charger and Battery
  • The Performance Tools 2.5 Watt Solar Battery Charger # PTW2997 includes a 9-foot cord and both a cigarette lighter style and a spring clip style extension that plug in with 2-pole connectors like those on part # 9651P. If your battery tender's cord uses this type of connector then it will plug in and function but you'll want to keep in mind that the added 25-feet of wiring will cause some voltage drop. If you happen to have a set of heavy gauge jumper cables around, something like the...
    view full answer...

  • Recommended Location to Attach a License Plate to a Tilt Easy Hauler
  • I would recommended checking with your local law enforcement or state highway patrol because laws and regulations vary from state to state. On the other hand, I have seen a couple license plates mounted to the wheel fender. I would recommend a license plate frame such as # CR62032. It will show more plate in all 50 states. A LED license plate light mounting bracket such as # LPL55CB could also be a great addition especially since you are towing a easy hauler. I have included a...
    view full answer...

  • Cargo Carrier, Light Kit, and Wiring Harness for a 2000 Honda Accord
  • I will be happy to help you out. First, since all of the trailer hitches for the 2000 Honda Accord are Class I hitches you will need a cargo carrier that is rated for a Class I hitch. I have included a link to the available options for you. You will need to have a 4-Way flat connector on your Accord to activate a license plate light. If you do not already have a 4-Way you can add one using # 43105. Then you could use license plate mounting bracket and light # PM436B. The power wire can...
    view full answer...

  • Recommended Plug to add Lights to Trailer Tailgate
  • In order to add lights on your trailer's tailgate that will allow you to remove it, you can use 2 Wire Loop # 9651P. What you would want to do is cut it in half and use one side for your tailgate and one side for your trailer. I've added a link to a video review for you to take a look at as well.
    view full answer...

  • Amperage Rating of 2 Wire Loop, 12" # 9651P
  • The 2 Wire Loop, 12" # 9651P that you referenced is made of 12 gauge wire which has a 13 amp rating.
    view full answer...

  • Wiring Compatible with the LED Tail Lights with SAE 2 Wire Connector
  • The SAE two wire connect is sometimes a factory connection, but you can simply cut the connector and use butt connectors like # DW05744-5 for the LED Tail Light for Trailers Over 80" Wide - 7 Function - Submersible - 17 Diodes - Passenger # STL36RPG and driver side # STL37RPG if desired. If you want the quick connect, then I recommend getting the 2 Wire Loop, 12" # 9651P and cutting the middle to give you the two quick connectors you need for that lighting kit to have the quick connects...
    view full answer...

  • What Gauge Wire is Used on the Spectro 2 Wire Loop # 9651P
  • I spoke with my contact at Spectro and she informed me that this 2 Wire Loop # 9651P uses wire that is 16 gauge.
    view full answer...

  • Wiring a Backup Camera to be able to Move it from The Truck to the Trailer
  • Typically, on a factory installed 7-Way, the center pin is for reverse lights. If there is not a wire in the center pin on the trailer side connector, you can add one and run it all the way back. I would purchase a couple of 2 Loops with connectors, part # 9651P. You can use these connectors to provide a quick and easy way of disconnecting the camera system to move it from the truck to the trailer. Depending on the camera system, you may only need the two wires, one for ground and one...
    view full answer...


Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Test Fit:
Nicholas E
Photos by:
Zach O

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.