1. Wiring
  2. Powerbuilt
  3. Tools for Wiring
  4. Trim Removal Tool
Powerbuilt Trim Pad Remover

Powerbuilt Trim Pad Remover

Item # ALL648544
lowest price pledge
Retail:$13.28
Our Price: $9.66
You Save: 27%
Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.4 lbs
Quantity: 
In Stock
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

The trim pad remover is perfect for easily prying up plastic or metal trim fasteners to safely open up panels in your vehicle. The contoured handle allows easy access to fasteners. The trim pad remover helps to prevent blemishes on surfaces. Lowest Prices for the best wiring from Powerbuilt. Powerbuilt Trim Pad Remover part number ALL648544 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (64)
  • Q & A (57)
  • Videos (2)
  • Photos
  • Why etrailer?

Powerbuilt Wiring - ALL648544

  • Tools for Wiring
  • Trim Removal Tool
  • Powerbuilt

The trim pad remover is perfect for easily prying up plastic or metal trim fasteners to safely open up panels in your vehicle. The contoured handle allows easy access to fasteners. The trim pad remover helps to prevent blemishes on surfaces.


Features:

  • Helps to safely remove plastic or metal fasteners from door panels, dashboards, and consoles
    • Removes fasteners of all shapes and sizes
    • Helps to protect surfaces from scratches, dents, and dings
  • Prevents broken fasteners
  • Chrome plated shaft
  • Comfortable contoured handle
  • Dimensions: 9" long


648544 Alltrade Tools Power Built Trim Pad Remover







Video of Powerbuilt Trim Pad Remover

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Powerbuilt Trim Pad Remover Demonstration

Today, we're going to be taking a look at the Powerbuilt Trim Panel Remover Tool. This is where it comes in handy for all types of fasteners, whether they're plastic or metal. Part number on it is ALL648544. Now, let's take a quick look since we're here in the hatch area. There are few different uses or a few different areas where our Powerbuilt trim remover tool will really come in handy. To start our push pin fasteners here, we'll be able to use the almost similar to a screwdriver edge there.

To pull out the center core, then we can go right in behind it with the panel tool and pull that right out. Another place where it really works out well is being able to get that along the underside of our trim panels themselves, and then you can see all we have to do is kind of tip up on it slightly. Then, we can hear our fasteners popping out of place. We can continue that all the way across to free up that rear panel. Another great aspect. Again, the screwdriver kind of style here, we'll be able to tip that right in there.

Pop off our panel giving us access into the bolts below, if we wanted to remove that or something of that nature. That's going to complete today's look at the Powerbuilt Trim Panel Remover Tool, part number ALL648544. .


Customer Reviews

Powerbuilt Trim Pad Remover - ALL648544

Average Customer Rating:  4.9 out of 5 stars   (64 Customer Reviews)

The trim pad remover is perfect for easily prying up plastic or metal trim fasteners to safely open up panels in your vehicle. The contoured handle allows easy access to fasteners. The trim pad remover helps to prevent blemishes on surfaces.

- ALL648544
by:

Don’t think I absolutely needed this for the install, but it came in handy anyways. 597285



- ALL648544
by:

To date, my dealings with etrailer have been 99.99%. I give you the mark down not because of anything you did or did not do but, because the 2" receiver plug looked so good on my Subaru, in a Walmart parking lot, that someone took it for his/her own. I will continue to use etrailer as my first "go to" source. Thanks, 678396



- ALL648544
by:

I ordered a hitch receiver and light kit. Everything was as advertised. The only thing I would change was the but connectors. They were very hard to crimp. Luckily I had some fencing pliers for the wire crimp pliers I had wouldn't work. 245490



- ALL648544
by:

This product is a MUST in removing those pesky trim buttons on the vehicle. Once the center button is pulled out enough to get the trim removal tool under, button comes out with no problems and can be re-used. I highly recommend this tool. 507986



- ALL648544
by:

works as advertised 738664



- ALL648544
by:

Made trim easy to unfasten 738067



- ALL648544
by:

Very easy to install. Follow the video instruction guide which is very good. I'd recommend hand tools rather than the power tool. Removing the large bracket will require hand tools. All fitments are very tight. Buy the trim pad remover tool, it will make life simple and save your trim fittings. 736979



- ALL648544
by:

I want to thank "Tom" for his review on 1/10/2019 as it helped me out tremendously to use his same parts list for my own installation on our 2015 Toyota Highlander XLE vehicle. I luckily had a friend from church that had a lift so it made it a lot easier to get all the bolts in place and reassemble all the parts of the vehicle after installation. Here is my parts purchase list from etrailer: The Draw Tite 76156, 18144 plug mounting Bracket, Curt C56217 wiring kit, the ALL648544 Trim Pad Remover, and the Curt I26 Light Tester. You may not need the Trim Pad Remover but it was handy to have so we didn't break the plastic Grommets that hold a lot of the trimmings of the car together. These items also made for a clean look on the installation and this particular hitch (Draw Tite 76156) hides real well behind the bumber. I am very happy with the experience. I will definitely be using etrailer.com in the future. P.S. definitely watch all the videos attached to this product page. They were very helpful in find your way around the car and tricks for making the installation easier and cleaner. 734567



- ALL648544
by:

All good 728759



- ALL648544
by:

Worked but ends are a little too thick to get under the tabs easily 725295



- ALL648544
by:

I have always wanted one of these but never took the time to order one. Always mangled things with my screwdriver. For some reason this popped up when I was ordering some rv parts so I put in my cart. Used it this week to pull interior panels on my mini van and it worked soo well! Better then I imagined. Zero damage to panels or the plastic fastener thingies. Should be in any handy mans tool box. 705433



- ALL648544
by:

Thanks for fast shipping 699151



- ALL648544
by:

Great product. Easy to install. Had to change it up a little because I was removing an OEM Subaru hitch. That one was too small for my bike rack. Works great with a swing out Thule 4 bike rack. Very sturdy! 696353



- ALL648544
by:

Tool worked perfectly to remove trim fa steners. 694108



- ALL648544
by:

Easy to install. Would purchase again. 682131



- ALL648544
by:

made panel removal a breeze. 673258



- ALL648544
by:

I got the tool just in time to use it for my car. It was strong and safe to remove all interior panels with no damage to them. 668710



- ALL648544
by:

Made getting plastic grommets out on my Honda Odyssey simple in preparation to install my hitch. The right tools make the job a lot easier. 667048



- ALL648544
by:

This tool makes removing panels in your vehicle so much easier, and doesn't damage the panel. 659747



- ALL648544
by:

Bought this tool to help when installing a Curt trailer hitch on my Subaru Outback. It was definitely a good investment. Although I am sure I could have done the install without it, it made the job a lot easier than doing it with a flathead screwdriver. The angled head really does help. 656864



- ALL648544
by:

Everything went great. A+++ 656841



- ALL648544
by:

Great tool to remove clips. 644431



- ALL648544
by:

Really made removal of body panels a ton easier to install wiring harness. Definitely recommend!! 643592



- ALL648544
by:

Everything was provided for a successful installation. Watching etrailers videos was very helpful. 643089



- ALL648544
by:

Made removing push connectors easy 640130


29
68
Show More Reviews

Ask the Experts about this Powerbuilt Wiring

  • Tools Needed to Install EcoHitch Trailer Hitch Receiver on a 2016 Subaru Outback
    I've linked an install video of the EcoHitch, part # 306-X7266, being installed on a 2016 Subaru Outback for you. The tools you need are: Phillips and flat head screwdrivers Ratchet with 10 mm socket Trim Remover, part # ALL648544 Mallet Utility Knife Tape Measure Grease pencil Straight edge Torque Wrench, part # ALL644044
    view full answer...
  • Wiring Harness Recommendation for 2019 Nissan Pathfinder Without Tow Package
    For ease of install, the trailer wiring harness I highly recommend for your 2019 Nissan Pathfinder without the tow package is the Curt T-Connector Vehicle Wiring Harness # C56281 because it does not require any type of splicing into your Nissan's wires and does not need a direct connection run to the battery, which is often the trickiest part of a harness installation. This harness will require the installation of a couple relays (as you can see in the accompanying photo) but remains...
    view full answer...
  • 2019 Jeep Cherokee Trailhawk Trailer Brake Controller Installation
    Vehicle passenger compartment plastic trim panels, like the dash panel on your Trailhawk that comes off to give you access to the brake controller port, usually have tabs that fit into slots or metal fasteners, in addition to the visible retaining screw. Once the visible fasteners are removed it may still require a bit of force to release the panel, especially on a brand new vehicle. Often a trim panel tool set like # PTW80647 can help loosen things up. These plastic tools will be less...
    view full answer...
  • Best 7-Way Wiring Harness for 2019 Honda Pilot
    The best 7-way wiring harness for your 2019 Honda Pilot is from Tekonsha, which has a very strong reputation for creating quality wiring products. For your '19 Pilot the T-One Vehicle Wiring Harness - 7-Way Trailer Connector # 118286 is what you will want to use because it does just plug into your Honda's tow package harness, though you will need to also install the included fuses with this connector; the linked instructions for this harness detail exactly where to place those fuses. When...
    view full answer...
  • Recommended Wiring Harness for 2019 Toyota Tacoma
    The wiring harness I recommend for your 2019 Toyota Tacoma is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118685 because the install will only require you to plug it into connection points behind your taillights and run a hot lead to your battery. Additionally, you can have faith in how dependable this harness is because its manufacturer, Tekonsha, has such a strong reputation for creating quality wiring products. As such, this harness also has the highest maximum...
    view full answer...
  • Parts Needed to Install EcoHitch on 2019 Subaru Outback Wagon
    One of the neat things about the EcoHitch brand is that they are made from recycled materials (like you noted) which, in turn, are also recyclable. The EcoHitch Hidden Trailer Hitch Receiver # 306-X7601 for your 2019 Subaru Outback Wagon only requires a 10mm socket with a ratchet and/or torque wrench # ALL944001 for the tail lights and flange nuts, as well as a flat screwdriver OR the Powerbuilt Trim Pad Remover # ALL648544 for removing the push button fasteners that hold the fascia in...
    view full answer...
  • Wiring Harness Fit for 2018 Honda Accord Touring
    The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118776 will absolutely fit your 2018 Honda Accord Touring (non-hybrid); I checked with the manufacturer for you to confirm this. As for the installation and running the black wire to your Accord's battery, this is a common question and certainly understandable but it is necessary to run that wire directly to your battery. The reason is because the other 12 volt sources in a vehicle tie into the system's electrical...
    view full answer...
  • How to Wire Pop & Lock Tailgate on Honda Ridgeline Using Wiring Behind B-Pillar
    The B-pillar is located where the driver's seat belt is stored (see photo). You will need to remove the driver's door sill trim, left rear door sill trim, door opening seal and the B-pillar lower trim cover before you can remove the B-pillar cover itself. There are several retaining tabs and clips that come off with each piece. I recommend using a trim removal like # ALL648544 to lower the chances of damaging one or more of these pieces since you need to re-install them. Once you remove...
    view full answer...
  • Trim Panel Removal for Installing Curt 4-Pole Wiring Harness C56383 on 2018 VW Atlas
    Since we have not yet had a chance to install Curt 4-Pole wiring harness # C56383 on a 2018 VW Atlas we do not yet have a video to share with you to show the scuff panel removal. I was not able to access an online owner's manual for the 2018 Atlas but it is possible that the printed manual that came with your car may have details about trim panel removal. As you noted, Curt's written instructions (Step 3) are not very detailed about the removal of this plastic trim piece so I contacted...
    view full answer...
  • Removing Plastic Tray in Rear of 2019 Acura RDX to Install Trailer Wiring
    When installing the Tekonsha trailer wiring harness part # 118800 in your 2019 Acura RDX the lower storage compartments you mentioned in the rear cargo area does just pull out. Once you get past that point though there are some panels you'll need to be careful removing and a trim panel removal tool like part # ALL648544 would be what you'd want.
    view full answer...
  • Installation of 4-Flat Wiring Harness on 2019 Nissan Frontier
    Installation of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118525 that fits your 2019 Nissan Frontier (without a factory connector) is very straightforward, but installing a harness on a Nissan does require the use of relays, which are included with this kit. Start the install by attaching the relays, with the blue ones going on the white plugs and the brown one going on the brown plug. Then simply locate where you need to plug in the connectors and that's...
    view full answer...
  • Installation of Tekonsha T-One Wiring Harness on a 2017 Ford Escape
    While we have not had the opportunity to install this wiring kit on a 2017 Ford Escape, I do have the installation instructions, which I've attached, that will show and tell you exactly what is needed to install the Draw-Tite wiring harness # 118715 to your 2017 Ford Escape. The # 118715 is a confirmed fit for your 2017 Ford Escape. You will need a trim panel remover like # ALL648544 to remove the panels. You will also need 8mm socket and ratchet or 8mm Wrench, Drill (3/32” Drill Bit)...
    view full answer...
  • Hitch Fit and Installation Process on 2014 BMW X1 with Panoramic Sunroof
    We offer three brands of 2-inch Class III trailer hitch for the 2014 BMW X1, including the Curt # C13140 that you referenced. All available options can be seen on the link provided. We have not had a local customer come in for an install to enable us to shoot a video. This hitch installs without drilling but it is necessary to temporarily lower the exhaust to provide adequate working room for installing the included mounting hardware. Tools required include several metric wrenches, two...
    view full answer...
  • List of Best Products Needed for Towing with a 2014 Nissan Frontier
    The parts that you selected for your 2014 Nissan Frontier are excellent choices. Curt Trailer Hitch Receiver # 13241 is a custom fit for your Frontier so no drilling will need to be done to the frame of your vehicle. The Tekonsha T-One # 118266 will fit the Mounting Bracket # A10-9394VP but I also recommend using the No-Drill Mount Bracket # 18140 to avoid drilling into the Curt trailer hitch. We do have the Trim Pad Remover # ALL648544 available on our site that you see the installation...
    view full answer...
  • Installation Instructions for T-One 118754 Explained for a 2018 Volkswagen Atlas
    We certainly understand how frustrating manufacturer's installation instructions can be which is why we shoot our own installation videos and take our own install photos. We haven't had the chance to install a trailer wiring harness, like the T-One Harness # 118754, on a 2018 VW Atlas yet so I don't have any specifics for your vehicle, but I'm happy to give you some tips to clear up as much as possible. Up until Step 6 or "Routing the Green Wire" the instructions are pretty clear. To...
    view full answer...
  • How Does the Draw-Tite Custom Fit Vehicle Wiring Install on a 1998 Toyota RAV4
    I attached a set of installation instructions for the Draw-Tite Custom Fit Vehicle Wiring # 118388 that you referenced. But basically, you will open the rear hatch, push the rear seat forward, remove the rear threshold panel, storage covers and floor covering. Next, you will remove the rear interior trim panels. Several trim panel fasteners will need to be removed. To make removing the fasteners you may also be interested in purchasing a Fastener Remover # ALL648544. Once you get...
    view full answer...
  • Installation of Tekonsha Trailer Wiring Harness 118467 on a 2017 Subaru Outback
    I have included a link to a video below that shows trailer wiring harness # 118467 being installed on a 2017 Subaru Outback. The video shows you where to plug in the harness. The tool our installer uses to remove trim panels is the appropriately named trim panel remover tool # ALL648544. We also have a set with multiple tools, # PTW80647, you can use to safely remove panels.
    view full answer...
  • Location of Brake Controller Port Under Dash of 2015 Toyota Tundra with Factory Tow Package
    The brake controller port for the 2015 Toyota Tundra is located behind the section of the dashboard with the tow/haul button. To reach the connector you will need to locate the notch in the access panel in the center of the dash near the driver's side. Using a trim panel puller like # ALL648544, carefully pry the panel out and undo the locking tabs to remove the panel. You will find the mating connector behind this portion of your dashboard. The correct harness for your 2015 Tundra is...
    view full answer...
  • Recommended Trailer Wiring Harness for 2018 Acura MDX
    The wiring harness I recommend for your 2018 Acura MDX is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118628 because of its easy install. You will only need to plug in the connector at the rear of your Acura and insert the included fuses. Using Trim Pad Remover # ALL648544 will make it much easier to remove the panels in the rear of your MDX so you can make the necessary connections, and it is also recommended you use Dielectric Grease for Electrical Connectors...
    view full answer...
  • Recommended 7-Way Trailer Wiring Harness for 2018 Dodge Durango Without Factory Tow Package
    The 7-way wiring harness I recommend for your 2018 Dodge Durango is the Tekonsha 7-Way Trailer Connector # TK22113 because of its relatively simple installation and the strong reputation its manufacturer, Tekonsha, has for creating quality wiring products. Installing this wiring harness on your '18 Durango will only require you plug it into connection points behind your taillights and run the body harness to your battery. I have added a link to the instruction manual for you to check...
    view full answer...
  • Removing Cap of 2017 Honda Ridgeline to Install Trailer Wiring
    While we don't have a video I can hopefully explain how to remove the cap of the wiring on your 2017 Honda Ridgeline to install the trailer wiring # C56366. Remove the connector from the cross-member using a pry tool like # ALL648544. Remove the dark blue fastener from housing by sliding it rearward. Remove the protective cover taking care not to damage the locking tabs (picture with G in corner). The tabs need to be fully pushed down and released to allow the cap to come off. Insert...
    view full answer...
  • When Installing 4-Way in 2017 Volkswagen Tiguan Can Hot Lead Wire be Run Through Cabin
    Yes, you can absolutely run the hot lead of the Wiring Harness with 4-Pole Flat Trailer Connector # 118675 through the cabin of your 2017 VW Tiguan. You are certainly not alone in not having access to a lift and feeling that going underneath the vehicle can be a pain, so you can route it through your cabin, using Trim Pad Remover # ALL648544 to loosen the trim. In fact, we have a help article about running a hot lead, and I added the section about routing the wire through your vehicle;...
    view full answer...
  • Trailer Wiring Harness for 2019 Toyota Sienna XLE That Does Not Require Splicing
    For your 2019 Toyota Sienna XLE the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118648 will work perfectly for you without any type of splicing into your wires needed. To install this you will need to plug the harness into your tail light housing, which is why no splicing is needed. I do highly recommend using Trim Pad Remover # ALL648544 for easier access, and I have added a link to the written instructions as well as a link to a video install on a '19 Sienna...
    view full answer...
  • How Does Brake Controller Install on a 2016 Toyota Tacoma
    We don't have an install video yet, but I can describe to you how you would install the Prodigy P3 part # 90195 in your 2016 Toyota Tacoma with the install harness part # 3017-P. You will need to remove the panel just to the right of the steering wheel. Using a trim panel puller like part # ALL648544, locate notch in panel and pry the panel out and away from the dash being careful not to damage the trim or panel. Unplug the housings attaching the panel being careful not to damage locking...
    view full answer...
  • Brake Controller Port Location Under Dash Of 2015 Toyota Tundra With Factory Tow Package
    The port used for attaching a brake controller on your 2015 Tundra is located behind the part of the dashboard with the tow/haul button. To reach the connector you will need to locate the notch in the access panel in the center of the dash near the driver's side. You can use a trim panel puller like # ALL648544, and using great care pry the panel loose and remove the panel by unlocking the tabs. The connector you need is behind the panel. The correct harness for your 2015 Tundra...
    view full answer...
  • Best Way to Remove Push Pins Holding Fairing onto Thule MOAB Roof Mounted Cargo Basket
    I'd recommend a panel removal tool, part # ALL648544. Gently wedge the tool under the fastener, and pry gently. If you should happen to damage any of the push in fasteners, we sell replacements as part # 853-5482. We also carry the replacement fairing clamps that hold the fairing to the roof basket, part # 853-5818.
    view full answer...
  • Two Piece Coleman Air Conditioner Shroud Removal
    The MaxxAir TuffMaxx Replacement Shroud - White # MA00-325001 has 4 holes in the top for fasteners that need to be removed. Then you will pry the two pieces apart using a trim remover like # ALL648544 or a screwdriver.
    view full answer...
  • Can 12V Source Other than Battery Be Used When Installing Trailer Harness On 2017 Lexus NX
    The problem with attaching the 12V hot wire to any 12V plug or accessory in the vehicle is that the plug you found may be on a circuit with another item in your Lexus. You really want to make sure the wiring harness is on a circuit by itself. That way it protect the vehicle electrical system if anything happens like damage or a short. There is an inline fuse with the # 118652 harness that protects the converter and the wiring. I do not recommend using any 12V source other than the battery...
    view full answer...

Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Andrew L
Test Fit:
Randy B
Updated by:
Sarah W
Written by:
Kristen H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.