1. Wiring
  2. Hopkins
  3. Trailer Connectors
  4. Trailer End Connector
  5. 5 Flat
  6. Plug and Lead
Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights - Trailer End - 24"

Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights - Trailer End - 24"

Item # HM47913
lowest price pledge
Retail:$22.96
Our Price: $17.80
You Save: 22%
Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.17 lbs
Quantity: 
In Stock
Hopkins Trailer End Connector Wiring - HM47913
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Built-in LED lights on this 5-way flat connector let you know if power is being received from the tow vehicle. Separate lights illuminate to verify power to each function on your trailer for easy troubleshooting. Easy-to-grip, plastic construction. Lowest Prices for the best wiring from Hopkins. Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights - Trailer End - 24" part number HM47913 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (14)
  • Q & A (12)
  • Photos
  • Why etrailer?

Hopkins Wiring - HM47913

  • Trailer Connectors
  • Trailer End Connector
  • 5 Flat
  • Plug and Lead
  • Hopkins
  • 0 - 5 Feet Long

Built-in LED lights on this 5-way flat connector let you know if power is being received from the tow vehicle. Separate lights illuminate to verify power to each function on your trailer for easy troubleshooting. Easy-to-grip, plastic construction.


Features:

  • 5-Way flat trailer-end connector plugs into the 5-way flat on your vehicle
    • 5-Wire design is common on boat trailers with hydraulic brakes because it provides the reverse function for a surge brake actuator with solenoid
  • Built-in, red LED lights offer easy troubleshooting
    • Illuminate to verify that the connector is receiving power from the tow vehicle
    • Labeled for each function on your trailer
  • Easy-to-grip tabs allow for simple plug in and disconnect
  • Durable plastic construction
  • Corrosion-resistant terminals withstand the elements
    • Terminal grease is included


Specs:

  • Wiring harness length: 24"
  • Wiring configuration:
    • Green: right turn signal (RT)
    • Yellow: left turn signal (LT)
    • White: ground
    • Brown: tail light and side marker lights (TM)
    • Blue: backup/reverse lights (BU)
  • Wire gauge: 18
    • Ground wire gauge: 16
  • 90-Day limited warranty


Reduce the frustration associated with troubleshooting trailer wiring problems with this lighted 5-way connector. It has built-in LED lights that help you determine quickly and easily if the issue is with your tow vehicle or your trailer. Just plug the connector into the 5-way flat on your vehicle. No need for separate testing tools. Then activate each function on your vehicle and a red light will come on if power for that function is being received by the connector. If there is power going into the connector for all of the functions, then you know that the problem is on the trailer end and you will need to check your trailer's wiring. Each function except for ground is represented by a separate light and the functions are labeled for easy identification.



47913 Hopkins Plastic Trailer Connector with LED Test Lights - 5 Way Flat




California residents: click here



Customer Reviews

Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights - Trailer End - 24" - HM47913

Average Customer Rating:  4.9 out of 5 stars   (14 Customer Reviews)

Built-in LED lights on this 5-way flat connector let you know if power is being received from the tow vehicle. Separate lights illuminate to verify power to each function on your trailer for easy troubleshooting. Easy-to-grip, plastic construction.

- HM47913
by:

Great service - very fast shipping 899726



- HM47913
by:

Great Product, better than the factory plug that came on my boat trailer. 848280



- HM47913
by:

Provided a necessary fix after (I suspect) some neighborhood kids cut the wiring near the tongue of my boat trailer. I used heat shrink tubing to ensure a water tight connection. 686555



- HM47913
by:

Good product. Would be better if copper wire was tinned. 682688



- HM47913
by:

This 5-way plug works great. 617764



- HM47913
by:

Correct Parts Great Prices Fast Deliv ery 547738



- HM47913
by:

great product 545177



- HM47913
by:

Added backup lights on a small trailer so needed a SAE 5 flat plug. Works well. Also fits to a normal 4 flat connector on cables of vehicles without the 5th connection The trailer side 5th pin just overhangs the side of the vehicle cable. However, this won’t plug into flat 4 vehicles where the recepacle is recessed, as the fifth conductor would hit the vehicle receptacle. 542325



- HM47913
by:

When ever you Oder products the come in a timely fashion. Great communication in cusomer service! Also appreciate all the emails on their products. 521791



- HM47913
by:

Product was as advertised and delivered on time 521702


Comments
Working Perfect!
Richard L - 06/14/2019

56564

- HM47913
by:

Fast delivery just as expected 503366



- HM47913
by:

Have not installed the connectors but they are what I ordered. Thanks 471578



- HM47913
by:

Good deal 374006


Comments
Thanks Tony for reviewing the Trailer Connector!! Hopkins appreciates your business.
Hopkins C from - 05/03/2017

23607

- HM47913
by:

East to install. As described. 265225


14
14

Ask the Experts about this Hopkins Wiring

  • Replacement 5-Way Connector for Ranger Boat Trailer
    For a replacement 5-way we have the Hopkins 5-Way part # HM47913 which will work great. This even has circuit testers for each wire so that you can easily make sure everything is working properly. Wiring configuration on # HM47913: Green: right turn signal (RT), you'll run this to where the green wire was connected. Yellow: left turn signal (LT), to where yellow wire was connected. White: ground, to white wire connection. Brown: tail light and side marker lights (TM), to both the...
    view full answer...
  • 5-Way Trailer Wiring Connector Replacement for Trailer Where 5-Way Fell Off
    So the white wires are the ground wires most likely, the brown wires are the running light circuit most likely, the yellow is left turn/stop, the green is right turn/stop and the blue wire should be reverse lockout or brake output depending on your trailer's brake style. For a new 5-way you would want the part # HM47913 and you would wire it by color to your trailer's wires as they colors appear to be the same.
    view full answer...
  • Testing Trailer Brakes on 1973 Horse Trailer
    If your trailer does indeed have electric brakes and you want them to actuate, you will need a brake controller to activate them when the vehicle brakes are applied. We offer a large selection of brake controllers, I would recommend the Tekonsha Prodigy P2, part # 90885. The P2 is a proportional controller, which means that when properly adjusted the trailer and the vehicle will brake in tandem which saves wear and tear on both the vehicle and trailer braking systems. To install the...
    view full answer...
  • Is there an Adapter for a 6-Way Square Jayco Trailer Connector
    On the 6-Way square connectors # 37995 they are more of a generic type of 6-Way square. The one in your picture looks like the infamous Jayco 6-Way like what is found on adapter # 30104. But you need the opposite end from what is on this adapter. What you will need to do is remove the 6-Way connector you have and wire in something common in its place. Since you already have # 37995 you could use it, or at least the half that you need. Then wire the other end to the connector type that...
    view full answer...
  • Longer 5-Way Trailer Wiring Connector with Lead
    The longest 5-way connector for a trailer that has built in circuit testers is the part # HM47913 that you referenced. For a 48 inch 5-way and lead we have the part # 20017 but it does not have the circuit testers. We do have a 5-way tester too that you could use with this as part # 20115.
    view full answer...
  • Installation of Electric Lockout Solenoid for Brake Actuating Coupler
    For surge brake actuators, the solenoid like the Replacement Solenoid Valve for Titan Brake Actuators with Reverse Lockouts # T4748800 will allow you to bypass your brake actuator when backing up. The unit screws into the back of your master cylinder and then the brake line connects to the other end. One wire of this electric lockout solenoid will connect to the trailer frame as a ground and the other will connect to the reverse light function wire coming from your vehicle. You can connect...
    view full answer...
  • Best Trailer Hitch for a 2018 Highland Ridge Open Range 5th Wheel Trailer
    The trailer hitch I recommend you use on the back of your 2018 Highland Ridge Open Range Light LF291RLS to mount bikes or pull a trailer is the Adjustable Width Trailer Hitch Receiver part # 13703. The Adjustable Width Trailer Hitch Receiver is the most popular trailer hitch we have for trailers because it fits so many different types and allows for the receiver tube to be placed in the best position to ensure you don't have any clearance issues with a bike rack for example. It offers easy...
    view full answer...
  • Titan Brake Actuator Compatibility With Electric Lockout For Backing Up Without Engaging Brakes
    You can add an electric lockout to a Titan Zinc-Plated Brake Actuator # T43397007K. To do so, you will want the Replacement Solenoid Valve for Titan Brake Actuators with Reverse Lockouts # T4748800. You can then use the Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 to connect your reverse light function to send signal to your trailer side 5-way when you shift your vehicle into reverse. This adapter along with the Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights -...
    view full answer...
  • Replacing a 5-Way Trailer Connector that Has 10 Wires Ran to It
    There is a very easy solution for you! It does not have 10 wires but is exactly what we use anytime we change these out. The Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights part # HM47913 can be spliced directly to your current wiring color for color. Basically use the Deka Heat Shrink Butt Connector part # DW05745-5 and splice the two white wires to the single white on the plug. Do this for the 4 remaining colors and you are set. Use a heat gun or other heat source to shrink down...
    view full answer...
  • Replacing 4-Way Female to 5-Way Male Wiring Loop
    I do have a solution for you, however the female 4-Way to male 5-Way loop that you have is no longer available. Instead of using another adapter like this one your best option will be to actually cut off the 4-Way connector from the trailer and splice in a 5-Way like the Hopkins # HM47913 in its place. The blue wire from the 5-Way will go to the blue wire that you mentioned coming from the actuator. With this in place on the trailer you will be able to connect directly to the 5-Way on the...
    view full answer...
  • Troubleshooting New Wiring Harness On Trailer For Reverse Lights
    In order to get the reverse lights to work on your trailer you will need a 5-way on your vehicle and also on your trailer. It sounds like you have wired the 4-way up but now you need the reverse lights. I recommend removing the 4-way connectors on both the towing vehicle and on your trailer and installing 5-way connectors. For the trailer side I recommend part # HM47913. You would attach the white, yellow(or light green), green, and brown wires to the same color on your trailer and...
    view full answer...
  • Replacement Trailer Connector with 8 Wires for a Boat Trailer
    A 4-flat trailer connector is responsible for carrying four functions which are usually brake, left turn, right turn, and tail lights. I am not familiar with a 4-way trailer connector that uses 8 wires as I do not see what the other wires could be for. The best way to determine the correct replacement would be to test each of the wires for function with a circuit tester and then replace the connector with the one that has the slots for the functions you need. It may be that instead of splicing...
    view full answer...

Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Chelsea B
Updated by:
Alexander C
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.