Screw - Self-Tapping Phillips Head - 8 x 3/4"

Screw - Self-Tapping Phillips Head - 8 x 3/4"

Item # 1131832

lowest price pledge

Retail:$1.18

Our Price: $0.93

You Save: 21%
Wiring

Orders above $50 qualify for Free Shipping

Shipping Weight: 0.02 lbs

Arrives before Christmas with Ground or Free Shipping.
Quantity: 
In Stock, Ships Today
1131832 - Ground Screw Fastenal Tools for Wiring
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Lowest Prices for the best wiring from Fastenal. Screw - Self-Tapping Phillips Head - 8 x 3/4" part number 1131832 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (22)
  • Photos
  • Why etrailer?

Fastenal Wiring - 1131832

  • Tools for Wiring
  • Ground Screw
  • Fastenal


Features:

  • Size: 8 x 3/4"
  • Quantity: 1 self-tapping, Phillips-head screw


1131832 Fastenal Self-Tapping Phillips Head Screw






Customer Reviews

Screw - Self-Tapping Phillips Head - 8 x 3/4" - 1131832

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)


- 1131832
by:

Purchased because they were recommended for the trailer lights. Saved me a trip to the hardware store. 435475



- 1131832
by:

Excellent Service and Products. 191423



- 1131832
by:

Products were delivered lightning fast and in great shape. I will continue to use Etrailer for all my trailer needs. Service was outstanding! 168792


3
3

Ask the Experts about this Fastenal Wiring

Do you have a question about this Wiring?


  • Wiring Configuration for Trailer Side Marker Lights
  • The usual configuration for 4-pole trailer wiring has the WHITE wire as GROUND, the BROWN wire as RUNNING LIGHTS, the YELLOW wire as LEFT TURN/STOP and the GREEN wire as RIGHT TURN/STOP. If your light has white and brown wires coming out of it then typically the brown wire would connect to the + side of the running light circuit and the white wire would ground to the trailer frame, or could be run up to the trailer plug's ground. One way or the other the light must have a ground and a +...
    view full answer...

  • Will LED Clearance Light Work With One Wire
  • Yes, the Thinline LED Clearance and Side Marker Light - Submersible # AL91AB will work with your single power wire, as it uses a 2-wire (one for power, one for ground) pigtail or 1-wire pigtail with a self-grounding bracket. To mount this light you have a couple options. The first is the Mounting Bracket # A91BOB with Right Angle 2-Wire Pigtail # A46PB; you'd also want to use the Self-Tapping Screw # 1131832. Your other option to mount this light is to use Self-Grounding Mounting...
    view full answer...

  • Most Popular Replacement Clearance/Marker Lights for an Old Travel Trailer
  • The most popular clearance/marker lights we offer are the Optronics Clearance or Side Marker Lights w/ Reflex Reflector. These are offered in both incandescent part # MC38AB for amber or part # MC38RB for red and LED part # MCL31AB for amber or part # MCL31RB for red. They have a two wire design so they are super easy to install. The white wire gets grounded and then the back wire goes to the running light circuit with butt connectors part # DW05744-5. If you need screws to attach the light...
    view full answer...

  • What Hardware Is Needed To Install the Thinline LED Trailer Clearance or Side Marker Light MCL67AB
  • The Thinline LED Trailer Clearance or Side Marker Light part # MCL67AB is a surface mount light that has two mounting holes which you will see once the lens is removed. In order to mount this you can use pretty much any self tapping-screw like the Self-Tapping Phillips Head Screw part # 1131832. The Self-Tapping Phillips Head Screw could be used to mount most of our trailer side marker/clearance lights.
    view full answer...

  • Mounting Hardware for Optronics Mounting Bracket
  • The Optronics Mounting Bracket # A91CB grounds through the mounting hardware. So whatever hardware you use, whether screws or pop rivets, make sure it's made of a conductive metal. The hardware we generally recommend is self-tapping screws # 1131832 but pop rivets should work just fine.
    view full answer...

  • Access Door Measurement for Compatibility With 2017 Jayco Precept 31UL Motorhome
  • The Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - Chrome # UF48-979010 has overall dimensions that are 8 inches wide by 7 inches tall. The best thing you can do is look at the attached diagram of screw center locations to see how they match up to your 2017 Jayco Precept motorhome. If the holes don't match up but are a larger pattern, then you will be able to install the cover with self tapping screws like # 1131832 into the side of your motorhome.
    view full answer...

  • Can Self Tapping Screws Be Used To Install the Jensen RV Antenna Part # 44US01R
  • The Jensen Antenna part # 44US01R comes with bolts/nuts not self tapping screws. However, you can add these using part # 1131832 (3). In regards to strength, the self tapping screws will hold the antenna just fine on your roof so there will be no issues here.
    view full answer...

  • Can a Heat Shield be Sandwiched Between the Frame and Trailer Hitch
  • The Curt Trailer Hitch Receiver part # C12111 on your 2017 Ford Escape will need to be attached directly to the frame without anything between it. Sandwiching the heat shield between the frame and hitch will affect the integrity of the hitch and void Curt's warranty. Therefore, I cannot recommend you sandwich the heat shield between the frame and the trailer hitch. In order to further secure the heat shield onto the body of your Escape, you can always use a few self tapping screws like...
    view full answer...

  • Replacement Clearance Light Lens for a 1989 Beaver Motorhome
  • The task of finding replacement lens covers for a now 30+ year old motorhome is going to be very difficult. We do not have the correct replacement lens covers you need and you are going to have a very hard time finding them. Therefore, I recommend just replacing them as the process to install clearance lights is very easy and straightforward. All you will need is some butt connectors and a few mounting screws if they are not already included with the light. I have attached a list of...
    view full answer...

  • Replacement Tailgate Marker Lights for 1984 GMC C-Series Dually Pickup
  • Yes, from what I found, you can use # AL91RB LED lights to replace the five original incandescent tailgate lights on your 1984 GMC C-Series Dually Pickup. These are standard size clearance lights (2-1/2 x 1-3/16) that were used on a variety of different trailer and some truck OEM applications and were sold under a number of brand names. Keep in mind that these lights don't have wires coming out the back, so in order to install them you'll also need a mounting bracket # A91BB to provide...
    view full answer...

  • How To Install the Optronics Thinline LED Trailer Fender Light
  • The Optronics Thinline LED Trailer Fender Light part # MCL67ARB comes with a mounting bracket so as long as the surface you will be installing it on is metal then yes, it will work for you. All you would need to do to install the light is use two self tapping screws like part # 1131832 to mount the base and then once this is done you can attach the light to the base. To complete the process you will then need to attach the black wire to the running light circuit on your trailer which is...
    view full answer...

  • What Size Screw Is Needed for the Bargman Trailer Light 30-68-510
  • The Bargman Trailer Clearance or Side Marker Light 30-68-510 or Optronics Trailer Clearance or Side Marker Light part # MC48RB do not come with mounting screws therefore there is not an exact size recommend for this. That said, the screw will just need to be small enough to fit in the hole and long enough to secure both the lens and base. I really wish I had an exact size for you but the Self-Tapping Phillips Head part # 1131832 should work.
    view full answer...

  • Recommended Light for RV Storage Compartment
  • The LED Utility Light with Switch part # 328-001-504E is my recommendation for a storage compartment light as it is battery powered so you don't have to worry about routing wires to the storage compartment which can be a huge hassle. The battery will also last a long time as the LED's draw very little power so you won't have to worry about changing out the battery frequently. In order to install the light you just simply remove the lens, mount the base with screws like part # 1131832,...
    view full answer...

  • Recommended Door Holder for Fender Mounting
  • The Plastic Stem and Rubber Socket Door Holder - 2" Long Stem # DH39R can be installed onto your fender if desired to allow your door to be secured open. You can alternatively use a Hook and Keeper for Enclosed Trailer Door # 383400 in another location like mounted to the fender to give you a similar option. There is not an option we carry that is long enough to allow connection to the main trailer wall when the fender is making contact with the door.
    view full answer...

  • What Size Screw Is Needed To Install the Optronics LED License Plate Light Part # LPL59CB
  • The two mounting holes on the Optronics LED License Plate Light part # LPL59CB are .2" diameter which means you can use the Self-Tapping Phillips Head Screw part # 1131832 to attach them to your trailer. In order to make the wiring connections you can use the Deka Heat Shrink Butt Connectors part # DW05744-5. This will be everything that you need to install the light for the exception of a phillips head screwdriver and pair of pliers.
    view full answer...

  • Installation of UWS Truck Bed Tool Chest UWS01044 in 2018 Sierra Denali 2500 HD
  • The UWS Truck Bed Tool Chest # UWS01044 does require you to drill and use your own hardware to secure it in your truck bed. The choice of hardware is up to you; you could use screws, nuts and bolts or even u-bolts like # CE15252A if you prefer. Your spray-on liner will not be an issue for installation. Dimensions are shown in the linked diagram. This USA-made tool chest features 8 cubic feet of internal volume and its corrosion-resistant aluminum construction and foam-reinforced lid...
    view full answer...

  • Hardware for Tekonsha Mounting Kit # 5280
  • The Mounting Bracket # 5280 for your Envoy brake controller does not include the mounting hardware and Tekonsha does not provide this. To mount the bracket all you need are some 3/8 inch screws like # 1131832. You can also just obtain some at a local hardware store if that is easier. The holes on the bracket will match up to the mounting hole pattern on your Envoy.
    view full answer...

  • How To Attach the Black Molded Fender Bracket A67BB
  • In order to attach the Black Molded Fender Bracket part # A67BB I recommend using the Self-Tapping Phillips Head Screw part # 1131832 because the head will sit closer to the base and will allow for the Optronics Thinline LED Trailer Fender Light part # MCL65ARB to sit flush. The Black Molded Fender Bracket we offer grounds via the mounting hardware so a ground wire is not present but if you have a version of this bracket that does have a ground wire then you can just snip this and tape...
    view full answer...

  • How to Install Side Marker Light
  • To install a side marker light like the Optronics # AL82AB on your 2014 Malibu you will need to ground the white wire and then connect the black wire to your running light circuit. This then installs on the mounting bracket # A91BOB which you will need install using something like a self-tapping screw # 1131832. Sometimes the lights ground via the mounting hardware so if that's the type of light you have you need to make sure that you mount it to a clean, bare-metal surface. Attached...
    view full answer...

  • How To Mount the Optronics LED Trailer Tail Light # STL42RB
  • I am not entirely sure what you are asking but the Optronics LED Trailer Tail Light part # STL42RB is a flush mount trailer light that is designed to be installed on a flat piece of metal in a 4-1/2" diameter round hole with a self tapping screw like the Self-Tapping Phillips Head part # 1131832. The thickness of the metal that the light installs in is not an issue. The overall depth of the light is 1-15/16" thick. For a pigtail harness we have two options for you, part # A45PB or part...
    view full answer...

  • How To Mount the LED Trailer Clearance or Side Marker Light MCL32AB
  • The Self-Tapping Phillips Head Screw part # 1131832 can be used to secure the LED Trailer Clearance or Side Marker Light part # MCL32AB. This light will require two screws per side. If you also need wiring connectors we have those as well, the Deka Heat Shrink Butt Connector part # DW05743-5.
    view full answer...

  • How To Mount the Optronics LED Clearance or Side Marker Light w/ Reflex Reflector Part # MCL31AB
  • The Optronics LED Clearance or Side Marker Light w/ Reflex Reflector part # MCL31AB mounts by running two screws like part # 1131832 though the base. In order to access these screw holes you will need to remove the lens. I have attached a photo that shows the screw holes. I have also attached an install video for you as well. In order to make the wiring connections you will also need part # DW05714 and part # DW05737-1.
    view full answer...


Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Edited By:
Leah B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924