Fifth Wheel and Gooseneck Trailer Hitch Wiring Connector, 7-Way - Ford SD

Ask the Experts about this Draw-Tite Custom Fit Vehicle Wiring

• Nothing Working on Left Side of 2001 Ford F-350 After Repairing Torn Wire On Left Trailer Light
  It sounds like the crushed or torn wire might have shorted out and blown a fuse or relay on your 2001 Ford F-350. What you can do is to check with the vehicle owners manual for all of the fuses and relays related to the tow package. You can then check those to determine if there is a problem and replace as needed. I am including a link to a video of a gooseneck wiring harness being installed on a 2000 Ford F-250. At the 2:57 mark of the video it will show installation of the fuses and...
  view full answer...
• Ford OEM Connector With Bare Trailer Wiring For 2001 F-350 Dually For Custom Install
  For your 2001 Ford F-350 Dually, we don't have a bare wire kit with the gray OEM harness. I recommend using the 7-way # 20031 that is confirmed to fit and cutting the CAR adapter off the other end. This will give you the relays and fuses you need to make those wires function correctly as well. For a shorter length you can use # 118243. If you just need a 7 way connector, you can use # PK12-707E and connect the wires. If you need a wiring extension you can use # PK11-934. If you...
  view full answer...
• Fifth Wheel 7-Way Wiring Kit Recommendation for 2000 Ford F-350
  We have the Draw Tite 5th wheel 7-way kit part # 20031 which is confirmed as a fit for your 2000 Ford F-350. It has the square connector you mentioned to connect into the vehicle wiring. The harness length is 7 feet though which is normally enough to get the connector up into the bed of the truck. For a similar setup that uses a 10 foot harness we have the part # A10-7010 but this ties into the wiring by wiring into the round connector behind the 7-way at the vehicle bumper.
  view full answer...
• Need Duplicate 7-Way Socket in 2001 Ford F-350 for Power Feed for Slide-In Truck Camper
  Since you need to have two active 7-way sockets on your truck, one for your towed trailer and one for your slide-in camper, you can use Bargman harness # 54701-003. This will plug in at the rear of the truck at the existing 7-way. Please refer to the linked photo showing the connectors. It will connect inline with the existing 7-way and both will remain active. This will give your trailer and camper power at the same time. The linked video illustrates the installation process.
  view full answer...
• Fifth Wheel Trailer Wiring Recommendation for 1999 Ford F-250 with Square Connector
  Sounds like the product you are looking for is the part # 20031. This is the same fifth wheel trailer wiring style setup but uses the Ford square connector instead of the round style found on newer trucks like with the part # 20110.
  view full answer...
• Troubleshooting 5th Wheel 7-Way Install Where Both 7-Ways Stopped Working
  Sounds like you are trying to install gooseneck/fifth wheel trailer wiring in the bed of your truck like the # 20110. Since when you plugged in the 7-way you lost power at both 7-ways that would tell me that your problem is in the connection between the 7-ways at the rear of your vehicle. If the connectors aren't making a good connection then both 7-ways will not function. Try disconnecting the new 7-way and re-connecting it to see if you can make a solid enough connection for it all to work.
  view full answer...
• Trailer Hitch and Wiring Recommendation for a 2001 Ford F-250 Stake Pocket Truck
  If there is no trailer wiring at all at the rear of your 2001 Ford F-350 with a stake bed you are going to have to hardwire in a 4-way and then a 7-way adapter after. If there is a 4-way connector currently or you find the square connector that the part # 20031 attaches to you could go that route as well. For a hardwire 4-way you would need the part # 18252. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way....
  view full answer...
• 7-Way Wiring Recommendation for 1999 Ford F-250 with 7-Way in Bed of Truck
  We do have a fifth wheel 7-way kit confirmed as a fit for your 1999 Ford F-250 that uses the square style connectors like what your truck has. For that check out the part # 20031. This could basically be used in reverse and plug in to the wiring of the 7-way in your bed and then have the 7-way added to the rear of your truck. To combine the 4 and 7-way together you'd need the part # HM40975 to replace the 7-way that comes with the # 20031.
  view full answer...
• Recommended 5th Wheel Towing Package for a 2000 Ford F-250
  To determine the maximum trailer weight you can tow with your 2000 Ford F-250 you will need to gather both the Gross Combined Weight Rating (GCWR) and the Gross Vehicle Weight (GVW) of your truck. This can all be found on the information tag located inside the driver door jamb. If you subtract the Gross Vehicle Weight (GVW) of your truck from the (GCWR) that will give you the maximum Gross Trailer Weight (GTW) you can safely tow. The maximum towing capacity isted for your truck will vary...
  view full answer...
• Any Additional Items Needed To Install Curt Q20 Fifth Wheel Hitch, # C16636, On 2002 Ford F250
  The Curt Q20 Fifth Wheel Hitch, # C16636, is the 20K fifth wheel hitch, the R20 hitch rollers and the universal installation kit with rails. No additional items will be needed. You might want to also look at the Curt Q20 Fifth Wheel Hitch, # C16536, and # C16443-204, which is the same 20K fifth wheel hitch, the same R20 hitch rollers, but it includes the custom installation kit instead of the universal installation kit. If you are planning on doing the installation yourself, I would...
  view full answer...
• Recommendations for Gooseneck and Fifth Wheel Hitch on 1999 Ford F-350 Short Bed
  The best option to tow both a gooseneck and 5th-wheel trailer with your 1999 Ford F-350 with 6-3/4 foot bed is to use the B&W Companion 5th Wheel Trailer Hitch w/ Slider # BWRVK3400-5W along with the underbed installation kit # BWGNRK1108-5W. This is a great sliding 5th-wheel hitch that will give you an additional 12 inches of clearance for making sharp turns with your truck's shorter bed. The hitch has a gross towing weight of 20,000 pounds and vertical load limit of 5,000 pounds. The...
  view full answer...
• 5th Wheel 7-Way Recommendation for 1999 Ford F-250
  If you are looking for 5th wheel trailer wiring that fits your 1999 Ford F-250 and uses a square trailer wiring connector you'd want the Draw Tite part # 20031 which is a confirmed fit. This has the square connector that Ford trucks of your generation would have. The Curt part # C55774 you mentioned also fits but it would tie into the current 7-way by installing inline with it using the round connector found right behind the 7-way at the bumper.
  view full answer...
• Inexpensive 5th Wheel Trailer Hitch and Installation Kit for a 2000 Ford F-350 Long Bed
  Yes, the Pro Series 5th Wheel Trailer Hitch w/ Rails and Installation Kit # PS30132 will fit your 2000 Ford F-350 long bed. The installation kit used in this kit is the Reese universal kit # RP30035 and I have linked the installation instructions for you. To add in-bed wiring you can use # HM40157 if your truck has a factory 7-Way with the square connectors that plug into the back of it. If the connectors that plug into the back are round use # 54701-003. If you truck came with a...
  view full answer...
• Will a Reese 22k Fifth-Wheel Hitch fit in a Husky Brand Bed Rails
  Yes, 22k Reese fifth-wheel hitch # 30033 should fit into Husky brand bed rails, or we do also offer Reese rail and bracket kit # 50060-6008 which are custom-fit for your 2001 Ford truck. If you currently have the Husky bed rails and would like to ensure compatibility, the pin holes on the # 30033 Reese fifth-wheel mounting tabs would measure 20-5/8 left to right, or 21-7/8 inches front to back. These measurements would be from center of pin hole to center of pin hole. The correct...
  view full answer...
• Recommendation for Installation Kit to Install Reese 18K Signature Series Hitch on 2000 Ford F-250SD
  To install a 18K Reese Signature Series hitch in your 2000 Ford F-250 Super Duty Long Bed you will need to use the Reese Under-Bed Rail and Installation Kit, part # RP30073. This kit includes the custom designed mounting brackets that mount to the outside of your vehicles frame rails and the under bed crossmembers that sit along the top of the frame rails. I am including a link to the installation instructions on the Reese installation kit. If you are needing a fifth wheel wiring...
  view full answer...
• Recommended Fifth Wheel Installation Kit for 2000 F-350
  I recommend the Reese Quick-Install Custom Base Rails and Outboard Installation Kit for 5th Wheel Trailer Hitches, Item # RP56005-53. This kit is confirmed to fit the 2000 Ford F-350. Because this is a custom kit, it cuts down on installation time by more than half when compared with universal kits. It also mounts to existing holes in your truck frame, minimizing the amount of drilling necessary. I'm attaching two links for installation videos on vehicles similar to yours as well as...
  view full answer...
• Will Curt Q16 5th Wheel Trailer Hitch with Custom Fifth Wheel Installation Kit Fit Ford Super Duty
  The Curt Q16 5th Wheel Trailer Hitch # C16120 and the Custom Fifth Wheel Installation Kit # C16443-204 are a confirmed fit for your F-250 and F-350 Super Duty. I am sending a link to the a video review of the Curt hitch, as well as installation instructions for the hitch and the custom install kit. I am also including a link to all 5th wheel hitch kits that are a confirmed fit for your vehicle. If you only have a 4-way connector on your truck, you will need to upgrade to a 7-way...
  view full answer...
• Recommended 7-Way Wiring Connection For 2001 Ford F-350
  If you have the factory 7-way on your 2011 Ford F-350 then you will need the Replacement Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682. If you have the factory 4 way, then you will want the Fifth Wheel and Gooseneck Trailer Hitch Wiring Connector, 7-Way - Ford SD # 20031. For your 7-Way Super Sealed Connector w/7' Cable - Car End # 50-87-007 there isn't an adapter. It would need to be hardwired and for full function you'd need # 5506 if you don't have a factory wiring harness...
  view full answer...
• Fit of Pro Series 25K Gooseneck Plate Hitch 49080 on Reese 5th Wheel Rails in 1999 Ford F-250
  The Pro Series 25K Gooseneck Plate for Fifth Wheel Rails # 49080 will fit into any industry standard 5th wheel rails (ISRs) from Curt, Draw-Tite, Hidden Hitch, Reese and others. It is oriented front-to-back using the center set of slots in your base rails as shown in the linked review video. The Pro Series # 49080 offers a 25K capacity (but check your F-250 owner's manual to confirm the truck's capabilities). If you need a new wiring harness you can use Tow Ready part # 20110, or...
  view full answer...
• Can Reese 5th Wheel Trailer Hitch be Transferred from 1994 Chevrolet C/K Pickup to 2001 Ford F-250
  To transfer your Reese 5th Wheel Trailer Hitch from your 1994 Chevrolet C/K Series Pickup to a 2001 Ford F-250 you will need to simply replace and install new base rails on the F-250. You should be able to re-use your current Reese 5th Wheel Hitch as long as it is compatible with industry-standard, above-bed rails (considering you used a universal kit, this should not be an issue). For this, I recommend the Reese Quick-Install Custom Base Rails and Installation Kit # RP50082-58. This...
  view full answer...
• Is Modification to a 2001 Ford F-350 Dually Required to Install a B&W Gooseneck Trailer Hitch
  B&W gooseneck trailer hitch # BWGNRK1384 fits Ram trucks but not your 2001 Ford F-350 dually. For your truck you can use # BWGNRK1108. There is no drilling into the frame required to install this hitch but you will need to drill the hole in the truck bed for the gooseneck ball. I have included a link to the installation instructions to the right and a video showing installation for you. You will notice that there is not really any modification needed to install the hitch, even on a dually. To...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?