1. Wiring
  2. Draw-Tite
  3. Wiring Adapters
  4. Single-Function Adapter
  5. 4 Flat
  6. 4 Flat
60" Car and Trailer End Loop 4-Pole

60" Car and Trailer End Loop 4-Pole

Item # 18045
lowest price pledge
Retail:$18.36
Our Price: $7.90
You Save: 57%
Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.33 lbs
Quantity: 
In Stock, Ships Today
Wiring 18045 - Plug and Lead - Draw-Tite
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Lowest Prices for the best wiring from Draw-Tite. 60" Car and Trailer End Loop 4-Pole part number 18045 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (15)
  • Q & A (16)
  • Videos (1)
  • Photos
  • Why etrailer?

Draw-Tite Wiring - 18045

  • Wiring Adapters
  • Single-Function Adapter
  • 4 Flat
  • 4 Flat
  • Plug and Lead
  • Draw-Tite
  • 0 - 5 Feet Long


4 Pole Trailer Connector Loop
  • 60" 4-Pole Loop
  • Includes 4 Wire Taps


118045 60" Car and Trailer End Loop 4-Pole




California residents: click here


Video of 60" Car and Trailer End Loop 4-Pole

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Draw-Tite Wiring - Wiring Adapters - 18045 Review

Today, we're going to be reviewing part number 18045. This is the 60 inch car and trailer end 4-pole flat loop. This loop is going to plug in to your existing 4-way flat connector and that's going to extend it by 60 inches. That way, you can make whatever connection you need to make when using the extender. It's going to include four wire taps in case you need to hard wire into your connection. All you got to do is cut the wire as needed and then install the wire taps. You can see on this end, we're going to have the female end.

Simple, 4-way flat connector. On the other end, it's going to be a male connector. When it comes to the wiring configuration of this unit, pretty typical with 4-way flat connectors. Your brown wire is going to be for your tail lights. Your yellow wire is going to be for your left turn and brake. Your green wire is going to be for your right turn and brake.

Your white wire is going to be for your ground connection. That's going to do it for today's review of part number 18045. This is the 60 inch car and trailer end 4-pole flat loop. inaudible 00:01:00.


Customer Reviews

60" Car and Trailer End Loop 4-Pole - 18045

Average Customer Rating:  4.8 out of 5 stars   (15 Customer Reviews)


- 18045
by:

During the original installation had to plug together a 2' and a 4' section that came with the wiring kit. Worked okay, but the extra plug was another spot for corrosion. This was a great replacement and the perfect length for my setup. I have a brake on indicator wire that I taped to this bundle and wrapped it with 1/2 inch wire loom. Works great and is easy to install. Add some dielectric grease to the contacts to keep the connection clean. 634384



- 18045
by:

Awesome. 435519



- 18045
by:

Can't say this was earth-shattering, mind-boggling or game-changing. It's a plug, but a decent one. I used it to save the connections on my 4-to-3 wire converter. I don't like the tap connections, because they really don't make good connections and can damage those thin wires on the car; so I solder and tape connections instead. 334875


Comments
Great! No drama or deterioration
JimVanDamme - 01/24/2018

33643

- 18045
by:

yes it is good ,just had to switch a couple of wires to fit my truck. 312973



- 18045
by:

Prefect fit 280454



- 18045
by:

Product arrived in great shape and was delivered quickly. These guys (and gals) are over the top in their game. I will definitely use this company again. 272237



- 18045
by:

works very well for what I need 246219



- 18045
by:

Good product 236251



- 18045
by:

The cables & plugs are heavy duty. 179351



- 18045
by:

Items delivered were as described. Quick delivery Will not hesitate to order from them again 148810



- 18045
by:

I have cut this in two pieces and used one half on truck, and one half on trailer for wiring from scratch. I've also used as as extension between truck and trailer. Works great either way you use it. Tom S. In Ohio 124721



- 18045
by:

The item was exactly what I needed to extend the wiring line to my tow vehicle. 120624



- 18045
by:

Just what I needed to reach the plug on the front of my tow car. The cord that came with my Demco adapter plate was too short to reach the motorhome to plug the lights of the car into. This fit the bill! 115009



- 18045
by:

I ordered 60" Car and Trailer End Loop 4-Pole in the event I needed extended length for my EZ Tow Light Kit, however, I didn't need it but, I may be able to use it in future when changing vehicles. Processing and shipping was fast as usual from etrailer. 28481



- 18045
by:

Exactly what I needed. 11587


15
15

Ask the Experts about this Draw-Tite Wiring

  • How to Wire a Toyota Tundra with 4-Pole Connector to a Trailer with a 6-Pole Connector
    It sounds to me like you have two running light wires on your trailer. The green and brown and yellow and brown wires are most likely right and left side running lights so both of these should most likely attach to the brown wire terminal which corresponds to the brown wire in the 4-Pole connector on your truck. This would mean that you only have 5 poles in the trailer connector that are used. These could be the left turn/brake, the right turn/brake, brown running lights, ground and electric...
    view full answer...
  • Trailer Turn Signals Blink Opposite of What they are Supposed To
    It sounds like there are either some crossed wires or a bad ground (weird things can happen when there is a ground problem). On a trailer side 4-Way the covered pin is the ground. Next to it is the running lights. The third pin is left turn signal and brake lights, and the last pin is right turn signal and brake lights. It is possible that either on the trailer or vehicle the last 2 functions are swapped. Also make sure that the vehicle side and trailer side connectors are clean...
    view full answer...
  • Testing 4-Way Trailer Wiring Connector in 2012 Acura TL
    First thing you should do at this point is test the 4-way of the wiring harness with a circuit tester part # PTW2993 for voltage on all of the right pins when the taillight signals are being applied. Just like in the video I attached. If the voltage checks out there but the trailer lights still don't function right then the problem is on the trailer wiring. That would mean that problem is either due to a ground issue or a short issue. Make sure that the trailer side connector are...
    view full answer...
  • Troubleshooting Trailer Wiring Where Blinkers are Wired Backwards
    Sounds like the trailer wiring is backwards. To fix your blinker problem you need to just switch the left and right turn signal wires of the trailer wiring and you'll have them corrected. These two circuits are found in the 9:00 and 3:00 position of the 7-way connector.
    view full answer...
  • Best Way to Ground Lights on Aluminum Trailer
    The best way to handle the grounds for lights on an aluminum trailer is to mount a junction box like # 38656. You can then run ground jumpers from all lights back to the junction box and also connect the 4-pole such as # W787268. The box provide both a handy connection point for all the wiring and it protects those connections. You'll use ring terminals like # DW05702-1 for all connections in the junction box and butt connectors like # DW05744-10 to make any needed splices to the lights'...
    view full answer...
  • Trailer Right Turn Signal Not Working on Multiple Trailers Towed be the Same Truck
    It sounds like there is a tow package fuse or relay that has blown. Use the vehicle owners manual to find all of the fuse/relay locations related to the tow package wiring to check them. Checking fuses is easy enough but for a relay the only way to really check for a bad one is to use a known good one in place of a potential bad one.
    view full answer...
  • Attaching License Plate to Cargo Carrier So It's Visible With Carrier Loaded or Folded Up
    I don't have on off-the shelf item that provide a solution for your license plate, but I can tell you how to put something together that would work pretty well for you. I'd recommend you use a license plate bracket/lamp like part # LPL55CB. You could use wing nuts, fender washers and bolts that would allow you to quickly move the plate with a minimum of fuss. When the # 6502 carrier is folded down, you could need to drill holes in the edge of the carrier to attach the plate. When the...
    view full answer...
  • What is the Wiring Color Code for a 4 Pole Flat
    Below I have posted a link to the trailer wiring page that has a color code chart on it. Brown = taillights Yellow = left turn/brake Green = right turn/brake White = ground wire To confirm you have the correct connections you can use a circuit tester like the Quickee Tester, # 3808, and match the wiring from the vehicle with your 4 flat.
    view full answer...
  • Adapter to Mate 6-Way Square Trailer Connector to 4-Pole Flat Vehicle Connector
    First, thank you for including the photo of your pop-up trailer's connector. Photos always helps us help you. You are correct that Hidden Hitch Jayco adapter # 30104 will let you connect a 4-pole flat connector to a 6-way square connector on a Jayco brand trailer but your Dutchmen 801D may not be wired with the same pin configuration. You can try this part and it might indeed work, and if it does not you could cut it and re-wire the two sides to the appropriate set up using butt connectors. Or,...
    view full answer...
  • Parts Needed to Flat Tow a 2008 Mazda Miata MX5 and a 1994 Mazda Miata
    You are correct, the parts you have selected will work well together on your 2008 Mazda Miata MX5. There are some other parts that will be required. First, you will need a set of safety cables. With the RoadMaster Tracker Tow Bar, item # RM-020, the RoadMaster Single Hook, Coiled Safety Cables, item # RM-643 would be a good choice and will wrap around the tow bar to eliminate dragging. You will also need a set of Roadmaster Tow Bar Quick Disconnects, item # RM-201, to disconnect the...
    view full answer...
  • Needing a Trailer Wiring Adapter From RV to Flat Towed Vehicle
    If you have a 4-way flat connection on you RV and a 4-way round connection on your flat towed vehicle, then I recommend using a the Custer Trailer Connection Adapter, # ADP001. This adapter used with a wiring harness like # 18045 will allow you to connect to the 4-way flat connector on your RV to the 4-way round connector that is installed on your flat towed vehicle.
    view full answer...
  • Recommendations for a 7-Way to 4-Way Coiled Extension to Flat Tow a Jeep Liberty Behind a Motor Home
    The Hopkins Heavy-Duty, Coiled Trailer Connector Adapter, # HM47075, measures 3 feet long when stretched. This will most likely not be long enough for most flat towing applications unless the 4-Way end on the vehicle has some slack that you can pull out. You could just add a 4-pole loop, # 18045, which will provide another 60 inches of length. There is also a 48 inch loop, # 18044. A longer coiled cable is not available unless you use # RM-1064-B (8 feet long) and then wire in 4-Way...
    view full answer...
  • Lighting Functions and Extension Cable for the E-Z Mount Tow Light Kit
    The E-Z Mount Tow Light Kit, # EZT20B, provides stop, turn and taillight functions for flat towing. If you need an extension There are several options depending on the length that you need. If 48 inches would be long enough you can use the 48 inch Car and Trailer End Loop, # 18044. If 60 inches is needed use the 60 inch Car and Trailer End Loop, # 18045. If you need a custom length wire you could purchase a 4-Pole Trailer End Connector, # 18004, which is 12 inches long, a 4-Pole Vehicle...
    view full answer...
  • Adding In-Bed Trailer Wiring in a 1994 Dodge Ram for a Camper
    To add in-bed wiring for your truck bed camper I would need to know what type of connector the camper requires. A lot of campers have unique wiring connectors but I can tell you how to get some wiring in the bed and add a 7-Way blade style connector. You will start by installing a 4-Way (unless the truck already has one) at the back of the vehicle. Use # 118317 that you have referenced. Then you will need to install # ETBC7 which will provide a 7-Way and 4-Way at the back of the truck....
    view full answer...
  • 4-way Extension Recommendation for Use with an Optronics Light Kit # TLL36RK
    What I think would make the most sense for you to do would be to get a 4-way extension piece to give you a little more wire so that you could install the Optronics Trailer Light Kit # TLL36RK. It sounds like you would probably need about an additional 5 feet of wiring, so for that I would recommend you get a Draw Tite Wiring Extension # 18045. This basically is a 4-way extension that will give you an additional 5 feet of wiring and should do the trick for you. If you wanted to, you could...
    view full answer...
  • 5 Foot Long 4-Way Flat to 7-Way Flat Adapter
    Not exactly, but I can come up with a 5 foot long adapter that has a 7-way male on one end and a 4-way female on the other. Basically you would need the # 18045 and then to plug in the # PK12716 into the corresponding end and you would be good to go.
    view full answer...

Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.