1. Wiring
  2. Bargman
  3. Trailer Connectors
  4. Trailer End Connector
  5. 7 Blade
  6. Plug and Lead
Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End

Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End

Item # WG54006-043
lowest price pledge
Retail:$55.99
Our Price: $45.51
You Save: 19%
Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 2 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This molded, 7-way, RV-style, trailer-end connector allows you to connect your trailer to your vehicle. Coiled cord extends to 6' and then contracts conveniently for storage. Lowest Prices for the best wiring from Bargman. Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End part number WG54006-043 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (52)
  • Q & A (22)
  • Photos
  • Why etrailer?

Bargman Wiring - WG54006-043

  • Trailer Connectors
  • Trailer End Connector
  • 7 Blade
  • Plug and Lead
  • Bargman
  • 6 - 10 Feet Long

This molded, 7-way, RV-style, trailer-end connector allows you to connect your trailer to your vehicle. Coiled cord extends to 6' and then contracts conveniently for storage.


Features:

  • Pre-wired, 7-way, blade-style, molded plastic, trailer-end male plug allows you to connect your trailer to your vehicle
  • Coiled cord can expand to 6' yet still contract to prevent dragging and tangling
  • Molded cord is resistant to water, oil, and chemicals


Specs:

  • Wire gauges:
    • 14-Gauge: green, red, brown, and yellow
    • 12-Gauge: blue
    • 10-Gauge: black and white
  • 3-Year limited warranty


Wiring Code
Molded Connector Function Usual Trailer Wire
White Wire Ground White Wire
Red Wire Left Turn and Brake Yellow Wire
Brown Wire Right Turn and Brake Green Wire
Green Wire Tail Lights Brown Wire
Blue Wire Brake Power Blue Wire
Black Wire 12 volt (hot lead) Black Wire
Yellow Wire Aux. -



54006-043 Bargman Coiled 7-Way Molded Trailer Wire Connector, 6' Long






Customer Reviews

Bargman 7-Way, RV-Style Connector w/ 6' Long Coiled Cable - Trailer End - WG54006-043

Average Customer Rating:  4.8 out of 5 stars   (52 Customer Reviews)

This molded, 7-way, RV-style, trailer-end connector allows you to connect your trailer to your vehicle. Coiled cord extends to 6' and then contracts conveniently for storage.

- WG54006-043
by:

Works like its supposed to 728333



- WG54006-043
by:

I ordered all the parts required to safely flat tow out 2017 Jeep Cherokee Trailhawk from etrailer.com. The only part they didn't have was the Mopar Flat Tow Enhancement kit Jeep requires to flat tow this model. Ordering from them was great, the website is easy to use and I was able to locate all the pieces compatible with my specific vehicle. The expert recommendations help my decision choosing the right parts. I ordered from etrailer even though I found some of the parts on other websites a little cheaper. I chose to pay a little more because of all the effort etrailer has put into installation videos and guides. I was very pleasantly surprised to learn from etrailer that they have a price match guarantee! So my equipment consisted of the following Mopar Flat Tow Enhancement Kit (from Jeep) Roadmaster Battery Charge Line Kit for Towed Vehicles Mighty Cord 7-Way RV Style Trailer Connector - Trailer End WesBarg 7-Way, RV-Style Connector w/ 6' Long Coiled Cable Trailer End Pollak Black Plastic, 7-Pole, RV Blade-Style Trailer Socket - Vehicle End Hopkins Custom Tail Light Wiring Kit for Towed Vehicles SMI Stay-IN-Play DUO Supplemental Braking System Roadmaster Brake-Lite Relay Kit for Towed Vehicles Blue Ox Alpha Tow Bar - Motor Home Mount - 6,500 lbs Blue Ox Base Plate Kit - Removable Arms Blue Ox Tow Bar Cover - Aladdin, Aventa LX, Aventa II The installation videos are great but not all inclusive. Take the time to read the instructions that come with the parts. This is a major project, I took about 30 hrs over a full week but as you'll see in the pictures I took s few extra steps to make a cleaner look. Some of those extra steps: The base plate install requires the bumper be modified cutting off a flange on each side, I spray painted this to prevent corrosion. In the install video of the baseplate on the drivers side they use an extra quick link (not included) to run the safety cable around the wiper fluid reservoir. I took the time to remove it and run the safety cable behind it. I didn't want our nice new vehicle to look like it can be towed so I played the brake away switch and 7 way trailer plug behind the license plate, so when not being towed our vehicle looks great! Some things to be aware of. The Brake air cylinder that mounts to the brake pedal with four bolts may need longer bolts, it did on our Jeep. Spend the money for weather tight heat shrink crimp fittings. The Hopkins wire harness was about 1.5 feet short to get to my plug location. Buy extra zip ties, electrical tape and split loom. I recommend reading all the various installation manuals and watching all the videos because the various components integrate together and if you install one at a time you'll be doing a bunch of extra work. The brake light relay is a real pain in the butt, not because of the hardware but because of the location of the brake light switch which is very hard to get to. Overall I am very happy with the products and how the installation looks. We haven't towed it yet but do not expect any problems. 413525


Comments
Still very happy with our purchase. We’ve towed over 10k miles and have had zero issues with our tow setup. I’ve shared my experience with several other RVrs and recommended your company for their needs. Thank you
Roy - 07/30/2018

41674

- WG54006-043
by:

I had to replace the old 7 wire cable because the male plug had been pulled off. I chose the WH54006-043 coiled cable. I used a 1/2 inch clamp to hold the cable up at the box and a Connect-to-Protect to hold up the male plug. The result Is clean and tidy. Thank you, 700038



- WG54006-043
by:

I gave this coiled trailer cord set a 5 star rating because of the quality of construction and that the individual conductors appear to have a fine stranded construction that will take numerous extensions and retractions. The receptacle cord cap looks to be durable, but only time will tell on that point. The hot (+ black) and the ground (- white) conductors look to be a size 12 gauge and the (Blue) electric brake conductor looks to be a size 14 gauge size. The others are probably a size 16 gauge wire. The cord is heavy so your plug cap needs to be fully latched to the stub sticking up on the plug or it may pull out. Also I purchased the 6 foot one and now wish I had purchased the 8 foot version because of the high strength retraction capabilities of the cord, but that is my issue not the cords. 359058



- WG54006-043
by:

The 6 foot coil is very tight and does not stretch very far. I paired this with a new junction box mounted about a foot back from the front of the tongue. Luckily this worked out perfectly and I wont have to worry about it dragging. Just make sure you order the right length. This probably comfortably stretches about half its actual length. 489169



- WG54006-043
by:

I love having this coiled wiring plug on my trailer. the trailer gets towed with several different vehicles which have their plugs various distances away from the hitch ball. It's so nice to be able to reach the plug wherever it is without worrying about the cord dragging or having to wrap it around something when I don't need that much length. Wiring it up was easy, although I seem to recall that the wire colors don't match the standard that you see most places. That was a very minor hurdle to overcome. A year after install, it's still working great. I'd definitely buy this again if I was wiring another trailer. 288830



- WG54006-043
by:

It was exactly what I expected, just like it was described. 871667



- WG54006-043
by:

Once again the product was top notch the service was impeccable and the shipping was extremely fast!! 791530



- WG54006-043
by:

Fast shipping 790575



- WG54006-043
by:

Looks good I'll send pics when I get it installed 785637



- WG54006-043
by:

Works as I need! 774084



- WG54006-043
by:

Great product! I've owned for a year and it really does a nice job. One of the best investments I've made for my trailer. 746751



- WG54006-043
by:

When it arrived it seemed dried out. sprayed it down with vinyl protectant and it shined right up. Very stiff, does not stretch to 6'. Hoping it "breaks in". wiring was good quality and connections were easy. 727812



- WG54006-043
by:

After wiring 7 wire coiled plug pigtail into new breakaway battery box , utilizing two 5/8” wire/hose routing clamps to secure pigtail to trailer frame for specific routing application to reduce recoil pressure of plugin from vehicle plug outlet , it works great with adequate length of cable for any sharp turns . 717367



- WG54006-043
by:

Perfect 696180



- WG54006-043
by:

This is a very stiff 6 foot long cord. The coils will act like a spring pull the plug out of the socket if you try to stretch it too far. Just make sure you get the right size. 691955



- WG54006-043
by:

We really appreciate your products and service quality. We refurbished our 1982 trailer and needed parts that were difficult to find and you provided us the parts or other options. Thank you 673186



- WG54006-043
by:

Looks great, heavy and ridged 599904


Comments
After a year it’s still working great!!!
Chris - 01/25/2020

64809

- WG54006-043
by:

Great product solved my issues with various adapters 598139



- WG54006-043
by:

Been looking for one of these for a while to keep from winding excess cable around jack or possibly dragging it on the pavement. A friend told me about etrailer and I saw it and had to order one. Great quality and works perfectly. Great company to order from. 595635



- WG54006-043
by:

Very Great transaction. Thank You 592412



- WG54006-043
by:

I am very satisfied with the products I ordered. 589030



- WG54006-043
by:

Ive ordered from e trailer .com befor ...allways great results 586193



- WG54006-043
by:

Great product!! 575102



- WG54006-043
by:

Very sturdy all 1 piece. Thick outside wire casing. I suggest watching the video review and write down the color code of the wires. Makes installation a lot easier. Would definitely buy again. 568940


27
54
Show More Reviews

Ask the Experts about this Bargman Wiring

  • How to Find the Wiring Configuration of Bargman 7-Way, RV-Style Connector
    The Bargman 7-Way, RV-Style Connector # WG54006-043 uses the standard RV-style pin locations, but there is not an exact color coded diagram because your wiring must match up by function, and not color. You would need to use a circuit tester like # 40376 to determine the correct functions and pair the trailer and vehicle wiring that way.
    view full answer...
  • 7-Way Trailer Wiring Connector to Reach 6 Feet from Junction Box to Vehicle
    Stretching the 7-Way Trailer Connector # WG54006-043 to 6 feet isn't the best option for you. It'll reach 6 feet but the coils are fairly tight. I extended it easily to about 4 feet but beyond that it wanted to fight me. It'll loosen up over time of course but I think a longer cable would be better for you. The 8 foot long # 54006-044 is a better choice. Or if you want to really make sure you can reach there's a 12 foot, part # WG54006-046, but then it'll hang lower to the ground.
    view full answer...
  • Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
    The Bargman 7-Way, RV-Style Connector # WG54006-043 referenced in your question uses the standard RV-style pin locations for its 7-Way connector. I have attached a diagram of these locations and their functions for you to check out. Wire colors will often vary between manufacturers. The important thing is to match up trailer and vehicle wiring based on their function. The pin locations and their functions should match up between this connector and the vehicle side Hopkins # 37185 that...
    view full answer...
  • Will Trailer Brakes Still Function if Breakaway Kit isn't Hooked Up
    Your trailer's brakes will still activate like normal if you have your breakaway kit not connected. It's not recommended to tow a trailer with a non-functioning breakaway kit though.
    view full answer...
  • Is WesBarg 7-Way, RV-Style Coiled Connector Long Enough for Junction Box 2-1/2 Feet Back on Trailer
    If the junction box is 2-1/2 feet back from the front of the trailer then that would leave just 3-1/2 feet of the coiled cable # WG54006-043 to go from the front of the trailer to the vehicle and still have slack to make turns. That might not be long enough so I would add some additional wire, such as # DW04914-1, sold by the foot, to ensure there is enough slack.
    view full answer...
  • Availability of an RV Style 7-Way to 7-Way Extension
    If you want to use # WG54006-043 then you just need the vehicle end, such as # PK12-707E, since it already has the trailer end on it. We have some ready-made 7-Way extensions that you can use such as # 20027 or # C56080 which are 7 feet long. We have a shorter option, # TLW6021, which is 21 inches long. And we have a 10 foot long model # TLW6510.
    view full answer...
  • Can 4-Way of Boat Trailer Be Replaced with Coiled 7-Way
    The part # WG54006-043 could pretty easily replace a 4-way on a trailer like what you have. It would basically be just cutting off the 4-way and wiring the 7-way in it's place. The install video I attached shows a junction box being used to accomplish this like the # 38656. The video will walk you through the entire process. The circuits not needed from the 4-way to the 7-way can simply just be not used without a problem.
    view full answer...
  • How to Make 7-Way Adapter with 7-Way on Either End
    What you would have to do is use the part # WG54006-043 you referenced and then wire an additional 7-way plug to the other end like the part # 54-77-003.
    view full answer...
  • Adapter Recommendation to Convert Separate Trailer Wiring to Combined
    What you need is a converter to match the combined trailer wiring you have with the separate wiring you have from the vehicle. For that what you need is the part # RM-732 installed on the wiring. This will take the separate wiring and make it combined so that it will work like it should on the 7-way.
    view full answer...
  • Wiring Needed to Install Tekonsha Prodigy P2 Brake Controller on 1996 Isuzu Trooper
    The Universal Wiring Kit # ETBC7 that you referenced is indeed what you need to install a fully functional 7-Way on your 1996 Isuzu Trooper so that you can install the Tekonsha Prodigy P2 Brake Controller # 90885 to power the trailer's electric brakes. It is okay that the wire colors for the included 7-Way connector do not match up to the wire colors used on your trailer. The pins on the connector will still match up to the pins on the trailer's 7-Way connector with regards to function....
    view full answer...
  • What Wiring Accessories are Needed to Install WesBarg 7-Way, RV-Style Connector
    The WesBarg 7-Way, RV-Style Connector # WG54006-043 uses two different gauges of wiring so you will need two sizes of butt connectors. For the three smaller wires you will want Deka Heat Shrink Butt Connector - 16-14 gauge wire # DW05744-5. For the three larger wires you will want Deka Heat Shrink Butt Connector - 22-18 gauge wire # DW05743-5. When you install # WG54006-043 to your trailer you will want to make sure to test the wires by function instead of relying just on matching...
    view full answer...
  • Will WesBarg RV Style 7-Way Trailer Connector Work on Utility Trailers with Brakes
    Yes, the WesBarg RV Style Connector # WG54006-043 will work on your utility trailers. The only difference between a traditional RV style 7-way and a utility trailer 7-way is the wire color. The pins of the connector are the same. Therefore wire the connector on by function not color. Which is always a good idea anyway.
    view full answer...
  • How Long is the 8 Foot Cord # 54006-044 when Coiled Not Stretched?
    The Bargman 7-Way, RV-Style Connector w/ 8' Long Coiled Cable - Trailer End # 54006-044 is 13 inches at the coil then 10 inches at the connector and 7 inches at the pigtail. We also have the coiled 6 foot # WG54006-043 and the coiled 12 foot # WG54006-046 which will only be longer or shorter in the coiled section.
    view full answer...
  • Parts Needed to Make Custom 7-way to 5-Pole Wiring Harness for Light on Bike Rack
    To complete your wiring with a 7-way cord, taillight converter and 5-pole connector I recommend using a few other similar items to give you a cleaner and potentially more reliable setup. Instead of cutting part # A57CCB you could use coiled 7-way plug/cord # WG54006-043, converter # 118158 and 5-pole vehicle-side connector # HM47900. To make the wire connections you can use butt connectors # DW05744-10.
    view full answer...
  • 7-Way Plug For 2010 Ford F-250 Super Duty Factory Tow Package and Trailer Side Connector
    I recommend Hopkins 7 and 4-pole trailer connector socket part # HM40975 for the factory tow package on your 2010 Ford F-250 Super Duty. This Hopkins trailer connector plugs into the OEM tow package wiring harness. I have attached an installation video for your reference. For the trailer side, I recommend Bargman part # WG54006-043 7-Way Molded Trailer connector. I like the Bargman 7-Way Trailer connector because it is coiled so it's less likely to get tangled or drag the ground. I...
    view full answer...
  • 7-Way Trailer Connector to 7-Way Trailer Connector Coiled Adapter
    No, the 7-Way wire does not go from the 7-Way to the 6-Way on the Hopkins Heavy-Duty, Coiled Trailer Connector Adapter # HM47085. What I recommend is using # WG54006-043 which is a bit longer at 6 feet but it does have all 7-Way wires running all the way through and it is ready for a 7-Way connector. For a trailer side 7-Way use # 54-77-003. For a vehicle side 7-Way use # A10-7082VP.
    view full answer...
  • Parts Needed to Fabricate Coiled 7-Way RV-Style Trailer Extension Cable
    We do offer various lengths of 7-way RV-style trailer wiring extensions that are shown on the linked page. These all have a vehicle socket on one end and a trailer plug on the other, such as with part # TLW6048 from TorkLift. None of these extensions has a coiled-type cord as found on adapters like # HM47053. However, I do have a solution for you, which is to use one of the available lengths of the WesBarg RV-style coiled cable to fabricate your cord. We offer their 6-foot # WG54006-043,...
    view full answer...
  • 7 Wire to 4 Wire Round Adapter Needed
    I have attached a picture for you. If you need connectors like those in the picture then you can use the Hopkins Endurance Flex-Coil Trailer Connector Adapter with Nite-Glow, # HM47043. This adapter is designed for use when flat towing, 7-wire blade-style vehicle end connector and 4-wire round towed vehicle connector. If you have a different style of connector, please send me a picture and I will be happy to find a product that will work for you.
    view full answer...
  • Recommended 7-Way Round Trailer Connector And Wiring
    If you are looking for a round connector with a 7-way blade I recommend part # H20046. This is a trailer end connector with 8 ft molded wire. For a 7-way with 6 ft of molded wire you need part # H20044, and for the connector with 4 ft of molded wiring you need part # H20043. for a connector with a coiled wire I recommend the WesBarg 7-Way, RV-Style Connector, part # WG54006-043. This has 6 ft of coiled wire attached. If you are looking for a 7-way with round pins we do not offer a 7-way...
    view full answer...
  • Parts to Make Dual 7-Way Extension for Motorhome That is Flat Towing
    It sounds like you need an extension with two 7-blades on it, but in order to do this you will need to get a plug and lead as well as a plug. So you will need the 7-Way Molded Trailer Wire Connector # H20043 (4 feet long) or the coiled Bargman # WG54006-043 (6 feet long) and will need to wire in the Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector # PK12706. You can match the colors of the wires on the 7-way to the pins of the plug to make it very simple. I have added links to...
    view full answer...
  • Dimensions of the Wesbarg Coiled 7-Ways
    I went and pulled the WesBarg 7-Way # WG54006-046 and the # WG54006-043 from our warehouse to grab the measurements you requested. The coil diameter on both is 2-1/2 inches. For the 6 foot version part # WG54006-043 the length of just the coils is 8-1/2 inches and if measured from end to end with the coils unstretched it measures 27 inches. For the 12 foot long version the coiled portion is 19 inches long and from end to end measures 3 feet unstretched.
    view full answer...
  • Need A 7-Way to 7-Way Cable To Fit Between My RV and 2015 Jeep Wrangler Unlimited While Flat Towing
    Sounds like you need a 7-way to 7-way wiring cable to connect your 2015 Jeep Wrangler Unlimited to your RV when flat towing. You will need a 7-way plug and lead wire and a 7-way connector end. I recommend the WesBarg 7-Way, RV Style Connector # WG54006-043 and a Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector # PK12706. You will have to wire the Pollak connector on the other end of the WesBerg cable to connect your RV and Jeep. I like the coil design of this cable because it...
    view full answer...

Do you have a question about this Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Dustin K
Installed by:
Hayden R
Updated by:
Sarah W
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.