Video Transcript for The Low-Down on the Rain-X Latitude Windshield Wiper Blade w/ Water Repellent Coating

Today we're going to be taking a look at the Rain-X Latitude windshield wiper blades with water repellent coating. This will work with all lengths of the Latitude windshield wiper blades. The Rain-X Latitude windshield wiper blades are both heavy duty and rust proof, and provide excellent visibility in rain, snow or ice. The blades themselves have a built in water repellent in them, so it actually spreads it across the windshield as you use them. It distributes pressure equally all along the blade, so you'll get clean, streak-free results while it's being used. It has an aerodynamic design, which reduces the wind noise and drag and lift during high speeds. It also has a graphite coated rubber edge, which will also cut down the noise while it's working even in freezing conditions. The synthetic blend rubber squeegee delivers a longer lasting wiper performance, meaning you don't have to change these out as often. This blade installs quickly and easily with the included hardware, and works with the existing J-hook, pin and hold, pin style, bayonet style, pinch tab button or inserted lock connectors on your vehicle's windshield wiper arm. Now that we've gone over some of the features of the blade, let's go ahead and show you how it installs.

This is how it looks when you remove it from the package, but before we do anything to install it onto the vehicle, let's remove the blade from the vehicle and figure out which kind of connection point we're going to be working with today. We'll lift out blade up, pop that open. Now, it looks like we have a J-hook style, so now we know what to do with our actual blade. Now, since this is going to be for a J-hook design, we're going to flip up this little cover here at the top. To help us out, we use a quarter or a dime to pop that top portion open. Then our hook would slide into there as so.

Next we'll take our J-hook, feed it in like so, and then close our top. Then we'll remove our yellow piece here and set the wiper down. Then we'll repeat this for our other wiper as well. There you have it for the Rain-X Latitude windshield wiper blade with water repellent coating.