MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs

MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs

Item # MT70271

lowest price pledge

Retail:$111.31

Our Price: $67.95

You Save: 39%
Wheel Chocks

Orders above $99 qualify for Free Shipping

Shipping Weight: 39 lbs

Quantity: 
In Stock, Ships Today
MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs Motorcycle Wheel Chock MT70271
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Motorcycle Wheel Chock
  • Wheel Chock
  • MaxxTow
  • Steel
  • Single Chock
  • Black
Mount this chock to your truck bed, trailer or garage floor and easily roll your bike into place for simple, secure positioning. Chock adjusts to perfectly cradle motorcycle wheels 3" - 5" wide and 15" - 22" in diameter. Lowest Prices for the best wheel chocks from MaxxTow. MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs part number MT70271 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (43)
  • Q & A (54)
  • Videos (1)
  • Photos
  • Why etrailer?

MaxxTow Wheel Chocks - MT70271

Mount this chock to your truck bed, trailer or garage floor and easily roll your bike into place for simple, secure positioning. Chock adjusts to perfectly cradle motorcycle wheels 3" - 5" wide and 15" - 22" in diameter.


Features:

  • Wheel chock helps stabilize your motorcycle or dirt bike for storage or transport
  • Pivoting rear bracket makes loading and unloading bike a snap
    • Rotates up and locks in place to cradle tire when motorcycle is rolled into chock
    • Provides more stability than with standard, tubular chocks by ensuring 2 points of contact with your tire
  • Adjustable design fits a variety of tire sizes
    • Move front or rear bracket along base to accommodate large or small wheels
    • Use pins and clips to easily secure brackets in place
  • 2 Eyebolts provide sturdy tie-down points
  • Wide base and crossbeam offer excellent support
  • Sturdy steel construction
  • Corrosion-resistant powder coat finish
  • Simple bolt-on installation - attach to floor of trailer, shop or anywhere else you want to use it
    • Mounting hardware not included
    • Installation instructions included


Specs:

  • Application:
    • Tire width: 3" - 5"
    • Wheel diameter: 15" - 22"
  • Weight capacity: 1,800 lbs
  • Overall dimensions: 36" long x 35" wide x 16" tall
  • 90-Day warranty


70271 Maxx Tow Self-Locking Motorcycle Wheel Chock







Video of MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for MaxxTow Wheel Chocks - Wheel Chock - MT70271 Review


Customer Reviews

MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs - MT70271

Average Customer Rating:  4.7 out of 5 stars   (43 Customer Reviews)

Mount this chock to your truck bed, trailer or garage floor and easily roll your bike into place for simple, secure positioning. Chock adjusts to perfectly cradle motorcycle wheels 3" - 5" wide and 15" - 22" in diameter.

- MT70271
by:

Have used 6 times in the year that I have owned and works as good today as the first time I used it. 491018



- MT70271
by:

I purchased two of these, quality is about what you'd expect for $74.95 each. Assembly is straight forward and take just a few minutes. The "feet" are difficult to tighten due to the bolt size verses the access. One of the tie towns threads was nearly stripped and it wouldn't tighten. Since I need these now I didn't have time to worry about replacing it so I just used a high speed cutting wheel to remove an end cap, welded it internally and re-welded the cap. Do not over tighten the front support bar as you can crush the metal easily ... I used some over sized 3/8" washers to create more contact for the metal and spread the load. 177839



- MT70271
by:

I ordered one MT702701 wheel chock from Strainer and to my surprise the item arrived two days later. They gave me an upgraded shipping without my having to pay extra! The product is well constructed and made from a thick gage metal. Needless to say, I ordered a second unit which arrived the following day after placing the order. I have a newly constructed trailer with a great deal of goodies and theses chicks are apart of that! I definitely recommend the product! 453369



- MT70271
by:

Wheel chock and other items arrived as expected. The wheel chock was easily assembled, but did not include washers which I furnished. Installation in my trailer was also easy. I would recommend this product. 362240



- MT70271
by:

Half the price of Harley perfect for me. Easy set it 10 minutes. Tks 662662



- MT70271
by:

As advertised. Well built. Fast deliver y. 660794



- MT70271
by:

Great motorcycle chock I really like the tye downs being on the bracket no need to mount tye downs in the floor there already there. 657217



- MT70271
by:

I gave one of their representatives the tire size and told them that I have duel rotors on the front wheel of my motorcycle and want would be the best fit for a wheel chock. They gave me Item MT70271 and EMO5729. I had them express deliver so that I would have time to mount it on my trailer. It was a great, the easiest to assemble and mount and had plenty of clearance for the tire and rotors. It was simple who ever designed this item had a lot of thought put into it to work so well. Great help and product . Thank You again. Louie 656565



- MT70271
by:

Very easy to put together, will be easy to mount in any trailer or pickup bed. Very well built. Prompt delivery. Thumbs up 625484



- MT70271
by:

great product! Very stable 620284



- MT70271
by:

Excelent product, works great. 584942



- MT70271
by:

Received ascordered in a timely fashion. Thanks again. 574108



- MT70271
by:

Great product, easy to install and and excellent service. Heavy duty material and great craftsmanship. Went with regular ground shipping 5 to 7 days and received it in 3 days. Make strapping your bike down a breeze. 573140



- MT70271
by:

Paid a little more than a cheapy. Money well spent, nice heavy construction. 554096



- MT70271
by:

Would be nice if they included instructions on how to adjust it correctly for your wheel size. 503559


Comments

Worked out perfectly for taking my motorcycle to the track. Holds the motorcycle securely. The uprights can be removed easily, so that I can use my trailer for hauling other stuff.

Bruce - 05/02/2019

54753

- MT70271
by:

I bought this item or my new trailer I just purchased. I really didn't want to mount it. However, with a brand new HD Ultra Classic, I felt I was best. The product led it to its reviews and I am extremely happy with the purchase. Trailer was just the ticket. Should I ever need other products, "etrailer" will be my first stop. 484960



- MT70271
by:

Too big and heavy, slides on ground too easy when putting mcy on or off. Is stable and would probably work very well if bolted down. 466019



- MT70271
by:

Excellent products and Service. 473619



- MT70271
by:

I owe 4 bikes and a fully enclosed trailer, these have been a great addition for transporting my bikes when I'm not riding. Great product at a great price and etrailer is always top notch to deal with......it's a no brainer... 362601



- MT70271
by:

hi yes allllll goooood,, Brad 355571



- MT70271
by:

The product was built as advertised and was quite sturdy. I mounted it into a Ironhorse trailer and hauled my bike about 30 miles and it worked great. I don't foresee any issues with hauling this bike to Florida from Kentucky after seeing how well it worked on my short trip. Two issues I do have is: I wish the pivot piece was adjustable instead of the stop and that it needs to be made in USA instead of China. 340021



- MT70271
by:

great service, heavy duty easy to assemble should work great for my trip to daytona 338200



- MT70271
by:

Easy assembly, looking forward to picking up the new motorcycle soon. When not on trailer MaxxTow will support motorcycle in garage. Fast delivery. Thanks, Curt 335689



- MT70271
by:

Got 2 of these use them in a big enclosed toy hauler they work great just pull in easy to strap to and never any problem everything stays where it 329516



- MT70271
by:

Great product. Very well made and works great! 328023



- MT70271
by:

easy to put together.... 319252



- MT70271
by:

Product works great. Put it in my toy hauler and I can load my Gold Wing by myself. Holds the bike up while I get off and put some straps on it. I bolted it to the floor and use the trailer tie down hooks instead of the eyebolts. Definitely worth the money. 275954


Comments

Been a year since I bought this. I bolt it in and out of my toy hauler when needed. Definitely worth the money, glad I bought it.

Larry - 07/25/2017

26565

- MT70271
by:

like it so much bought 3 more 270659



- MT70271
by:

Well made and solid. Since I welded the base into a steel trailer, I didn't need to use the long cross arm. Just an FYI..to adjust, it is the front wheel catch that moves, not the swivel one in the back. 261174



- MT70271
by:

Ordered wheel chock and hitch silencer on Monday and received in Arkansas on Wednesday. Chock was everything stated on site. Very pleased with item and will be installing on trailer this weekend. 240872



- MT70271
by:

The motorcycle chock worked as advertised on our dirt bike. The chock is constructed of heavy duty steel and went together in minutes and should last a long time. I give this item 5 stars. 240378


Comments

The chock is working perfectly. This is a well made product and worth the money spent.

Tom - 03/09/2017

22668

- MT70271
by:

This motorcycle holder is very strong & versital. I mounted it to the floor of a box trailer. I've had not a single issue. The holder easily adjusts to my dual-sport motorcycle's (DR 650 & 800GSA) front wheels. When I transport my quad, I easily remove the upright wheel support & anchor the quad to the eyelets attached to the front of the holder. If you mount the holder properly to your trailer, then you should have no problems. 239924



- MT70271
by:

Just mounted this up onto my trailer. Great bang for the buck! I love that I can detach the pieces that stand up when I don't need them. The eye hooks also give more room to make sure that I've secured my R6. 214072



- MT70271
by:

Just what I was looking for. Delivery was fast. Thanks 213747



- MT70271
by:

good stable will talk ordered 3 already have one in use only problem was missing 4 washers in each wheel chock 213702



- MT70271
by:

As advertised. ... works great and very well built it may not look at cool as some of the 300 stand locks but this isn't a fashion contest... I'll definitely buy from e trailer again. 209311


Comments

Hi still working great :

thad l - 07/27/2016

19716

- MT70271
by:

just mounted this chock to a 4x8 sheet of plywood, ratcheted plywood in bed of my truck, got my BMW 1150RT loaded, 4 tie-downs and I hauled it 1300 miles in the back of my Silverado no problems. For about $80, good quality product, recvd it quickly and it worked great. glad I have it for future use! 203720



- MT70271
by:

E-trailer did excellent job of boxing and packing very heavy parts , received it in perfect share really fast. Self locking wheel chock is very heavy duty and is a good value . Plus look sharp in fancy inclosed trailer . Works great . I bought one to try and I'm very happy with it and plan on buy two more in future. 177818



- MT70271
by:

installed in trailer less than 20 min (of course already had one in there) loaded bikes and we were on our way used my first one for three years great quick load and go 166351



- MT70271
by:

Just as advertised and best prices on the internet. 161179



- MT70271
by:

I use these for both my bikes (superbike and dirt bike) It performs flawlessly 128898



- MT70271
by:

Quality looks ok. Just received it today. I will be a while before I actualy use it. 95227



- MT70271
by:

Great product and excellent service once again from etrailer. thanks again ! 77928


Comments

Can MT70271 be mounted to E track?

-- comment by: Ray - 11/20/2013

2333

This chock is designed to be mounted using through bolts on a trailer deck or truck bed. The closest thing that will fit E-Track is the Erickson Wheel Net, 77314,

-- Patrick B - 11/27/2013

45
45

Ask the Experts about this MaxxTow Wheel Chocks


  • Recommended E-Track Rings and Tie-Down Straps for Harley-Davidson in Toy Hauler
  • For your Harley-Davidson, I understand the desire to properly secure it as I would want peace of mind when transporting mine as well. Either the Erickson E-Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs # E59143 or the Erickson E-Track Tie Down Ring - 2,000 lbs # 59147 will work fine. You will not have anywhere near the weight capacity on the rings so it really can depend on your personal preference. I'd go with the # 59147 so there is no twist at the connection. For...
    view full answer...

  • How to Secure a 2018 Harley Davidson Tri Glide to a Trailer
  • In order to secure your 2018 Harley Davidson Tri Glide I recommend using the MaxxTow Adjustable, Self-Locking Wheel Chock part # MT70271 for the front wheel so long as it is not greater than 22" diameter or 5" wide. Then in order to secure the two rear wheels I recommend using an e-track system which is composed of the Erickson Horizontal E-Track part # EM19147 and the Erickson Adjustable Wheel Net with E-Track Fittings part # 77314. You can also add the Erickson E-Chock Wheel Chocks part...
    view full answer...

  • Recommended Trailer Hitch Receiver for Mazda 3 to Carry Motorcycle
  • For your 2014 Mazda 3 GT, there are only Class I trailer hitches available. The Class I trailer hitches are only capable of a 200 lb tongue weight, so you will not be able to use a motorcycle carrier like # UF48-979033 or similar you have pictured. You will need to use a trailer for your sport bike to haul behind your vehicle. My recommendation for your vehicle is to start with the Draw-Tite trailer hitch # 24912. Then use ball mount # 3593 and hitch ball # 19258. Then for your trailer...
    view full answer...

  • Available Motorcycle Transport Products for Hitch and Trailer Use for Honda Motorcycle
  • B&W makes their unique Biker Bar motorcycle transport systems, items # BWMC2301, # BWMC2302, # BWMC2303 and # BWMC2304, only for the Harley-Davidson line. No such items for Honda bikes are available from B&W. On the linked pages you can see the hitch-mount motorcycle carriers we offer as well as our range of trailer-mounted wheel chocks like the MaxxTow Adjustable Self-Locking Wheel Chock for 15 to 22-inch Wheels, part # MT70271.
    view full answer...

  • Wheel Chock Recommendation for a Honda Goldwing 1800
  • It looks like the front tire on your Goldwing is a 130 width meaning it is just a little bit over 5 inches wide. That would be just slightly too large for the MaxxTow Adjustable, Self-Locking Wheel Chock # MT70271 which accepts tires 3 to 5 inches wide. There is a similar option for wider tires, # MTMWC-01R, which will take a tire up to 7-1/8 inches wide. There isn't a backing plate that comes with it or a specific one designed for it but I do recommend using one such as # BPEZ since...
    view full answer...

  • Recommended Motorcycle Carrier or Trailer for Yamaha Majestic 400 Scooter
  • For your Yamaha Majestic 400 Scooter, I recommend the Detail K2 Motorcycle Carrier # K2TMC201. This carrier weighs 87 lbs, so you will need a trailer hitch receiver capable of the tongue weight with your receiver. If you do not have this, then I recommend the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7 along with the MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271. This will give you a sturdy wheel chock...
    view full answer...

  • Recommendation for Towing a Motorcycle with a 2001 Ford Crown Victoria
  • The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13707 for your 2001 Ford Crown Victoria will not have the capacity you are seeking. It is only rated for 400 lbs tongue weight for this type of application so your bike and the carrier will far surpass its capacity. I recommend using a trailer along with this hitch to protect your bike as a carrier will not work with your vehicle. For your wiring, I recommend the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole...
    view full answer...

  • Recommended Wheel Chock and Tie-Downs for Transporting a 2015 Suzuki Burgman 650
  • For your 2015 Suzuki Burgman 650, the wheel chock I recommend for your 21.6 inch diameter and 4.7 inch wide tire is the MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271. This wheel chock will hold your tire front and back nicely and doesn't have the side bars that could interfere with your dual rotors. This is the wheel chock I use personally and it is adjustable to meet your needs and also provides tie down eyelets for your straps to secure the...
    view full answer...

  • B&W Biker Bar Compatibility with 2018 Yamaha Venture Motorcycle
  • There is not a confirmed fit for your 2018 Yamaha Venture. The B&W Biker Bar has only been tested on Harley-Davidson motorcycles, but if your frame has a round bar that is 1.375 to 1.5 inches in diameter and a width between 10-14.5 inches then # BWMC2304 could work. If you don't have those specs on your frame, then I recommend the MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271. Then I recommend using the ShockStrap Ratcheting Motorcycle Tie-Down...
    view full answer...

  • Motorcycle Wheel Chock Recommendation for a 5.9 inch Wide Motorcycle Tire
  • The overall diameter of your tires is 19.5 inches and the width is 5.9 inches. The part # MT70271 can accommodate tires up to 22 inches in diameter and 5 inches in width so your tire would be too wide. The only wheel chock option we carry that would work is the part # TWSPWM that can accommodate tires up to 6-1/2 inches in width. Check out the review video I attached for more info. For a set of tie-downs you could use the part # EM05710.
    view full answer...

  • Mounting Hole Dimensions of Maxx Tow # MT70271 Wheel Chock
  • The attachment hole spacing is as follows: Font to back, the holes measure 2-1/4 inches apart, measured center to center. From side to side, they're right at 9-1/2 inches. I'm not sure what you meant by 'bad spot'. If you mean that a portion of the floor is damaged or deteriorated, I'd highly recommend you repair it before bolting the wheel chock in place.
    view full answer...

  • Wheel Chock Recommendation for Harley Davidson Street Glide with 5-1/2 in Wide Tire
  • I have a better solution for you that I can guarantee will work. Check out the MaxxTow Adjustable Wheel Chock # MT70075. This can fit tires up to 5-1/2 inches wide and would work well for you so we would recommend it for you. I attached a picture we got from a customer that shows it being used on a similar Harley as well. Even though it's only 1/2 inch difference I can't recommend the # MT70271.
    view full answer...

  • Can Wheel Chock MT70271 be Bolted to Plywood and Put in Trailer as Needed
  • My Dad used to have a wheel chock setup for his trailer that was two wheel chocks bolted to a larger piece of ply wood that he would set in his trailer when needed. He then used straps to secure the handlebars of the motorcycles to the trailer through eyelets that were bolted to the trailer frame. This worked well for him and would work well for you as well. The height of the front portion of the chock is 16 inches so you'd need to compare that to your fender height. The MaxxTow part...
    view full answer...

  • Will CE Smith Motorcycle Rail # CE26110PG Bend if Part of it Hangs Off the Back of a Short Trailer
  • I would not recommend using the motorcycle rail # CE26110PG since about 2 feet of it would be hanging off the back of the trailer. I have actually stood on this rail and it does flex. You can imagine that when traveling there is going to be some up and down movement stressing it even more but only if the rear wheel is on a part of the rail that is not supported by the trailer floor. If you can fit the whole bike on the trailer now you could trim the rail to fit the trailer. Otherwise...
    view full answer...

  • Wheel Chock Recommendation for 2015 Harley Davidson Electra Glide Ultra Classic Low
  • Most likely you are going to need the part # MT70075 as it can accept a tire that is up to 5-1/2 inches wide and your tire would be too wide for the # MT70271 which can only accept a 5 inch wide tire. Measure the width of your front tire first though to be sure.
    view full answer...

  • Quick Release Motorcycle Wheel Chock Recommendation
  • I have a solution for you, but the Wheel Chock part # MT70271 is designed for permanent install. Instead you might be interested in the # TWSPWC which has slotted install holes so that you can slide the chock backwards and remove it easily when needed. I attached an install video for you to check out as well.
    view full answer...

  • Options for Securing Harley-Davidson Motorcycle in Garage of Toy Hauler
  • The combination of the existing D-rings and the wheel chock that uses the # TWPH2770 mounting hardware for the # TWSPWC sounds as if it'd be an ideal solution for you. Installing the # TWPH2770 would involve drilling holes through the floor of the garage of your toy hauler, but once the mounts were installed, the chock can easily be installed and removed as needed. We don't carry the Condor chocks, but we do offer a similar chock from MaxxTow, part # MT70271, which would be a more permanent...
    view full answer...

  • Is there a Motorcycle Wheel Chock that Does not Require Drilling Into the Floor for Installation
  • If you had MaxxTow wheel chock # MT70271 up against a wall then it would stay in place when putting the bike in it but it might pull away when removing the bike. Otherwise for it or any chock to stay in place it would have to be secured to the floor.
    view full answer...

  • Recommendation for Transporting 400 lb Motorcycle With 2012 Subaru Impreza WRX
  • The EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2" # 306-X7261 you asked from for your 2012 Subaru Impreza is not compatible with your 400 lb motorcycle with a carrier. This hitch is only rated for a max capacity of 200 lbs. That greatly surpasses the hitch weight capacity and doesn't even include the weight of the motorcycle carrier itself. Your best option would be to tow a small trailer like the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. For this you...
    view full answer...

  • Recommended Motorcycle Chock and Tie Downs For Trailer
  • For your motorcycle, I recommend the MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271 to keep your bike in place...it is what I use. It gives you eyelets to attach straps to your bars if you want to secure your bike to the chock itself. For tie downs, you can use the Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles - 1"x6' - 400 lbs - Qty 2 # EM05729 and # 06303. If you use the e-tracks, you may want the # E59143 or retractible...
    view full answer...

  • Recommended Wheel Chock for Harley Davidson Road King Classic to Use in Garage
  • To secure your Harley Davidson Road King Classic in your garage, I recommend taking a look at the MaxxTow Adjustable Wheel Chock # MT70271. This is a great option that will work with tire widths of 3 to 5 inches and wheel diameters of 15 to 22 inches. It has a weight capacity of 1,800 pounds. The nice feature on this particular chock is its wide base and crossbeam that will provide excellent support for your Harley, along with 2 eyebolts that will offer sturdy tie-down points. The pivoting...
    view full answer...

  • Wheel Chock for Transporting 2016 Suzuki Burgman Scooter in Ram Pickup
  • The MaxxTow Adjustable Wheel Chock # MT70075 is not an ideal fit for your 2016 Suzuki Burgman scooter due to the smaller 15-inch wheel size and dual brake rotors. A better fit for your Burgman is their Adjustable Self-Locking Wheel Chock # MT70271. This mounts in your truck bed like the MT70075 but it provides a wider stance for better stability and its design provides plenty of clearance for your rotors. It also includes tie-down points to allow use of tie down straps like # EM05729.
    view full answer...

  • How to Secure a Vespa Scooter with 12 Inch Wheels and Tires in an Enclosed Cargo Carrier
  • The MaxxTow wheel chock # MT70271 should only be used with 15 to 22 inch wheels. A 12 inch wheel on a scooter could be a problem because the brakes and other suspension components will also be lower compared to a 15 inch or larger wheel and that interference would cause the scooter to not fit. I checked our similar wheel chocks and I am not confident that any of them would be suitable for a 12 inch wheel but I do have a possible solution for you. To secure the scooter I recommend...
    view full answer...

  • Will MaxxTow Adjustable Wheel Chock Fit a 2010 Harley Davidson Softail Custom and Be Easily Removed
  • The MaxxTow wheel chock # MT70271 accepts tires that are 3 inches to 5 inches wide and wheels from 15 to 22 inches in diameter. You can bolt the chock to the floor and if you used the right kind of fasteners # TWPH2770 to mount it then it is possible to make it more easily removable than it would be with regular bolts.
    view full answer...

  • Recommended Motorcycle Wheel Chock for 2006 Harley-Davidson Softtail Deluxe Tire MT90-B16
  • A motorcycle tire of size MT90-B16 has a width of 5-inches (up to a shade over 5-inches at most). The motorcycle wheel chocks we offer are all shown on the linked page. These all fit a range of tire widths and diameters. The bolt-on-install MaxxTow # MT70075 fits tires widths up to 5-1/2-inches so it will provide a closer fit than others that fits tires up to 6-1/2-inches in width. For a full-size road bike like your Softail I suggest a heavier-duty unit like the MaxxTow # MT70271....
    view full answer...

  • Method to Secure 2012 Scion iQ in Toy Hauler Trailer
  • The MaxxTow Adjustable Wheel Chock # MT70075 that you referenced does bolt to the trailer floor with included hardware but this is intended for motorcycles and is not suitable for your Scion. Also, you would need to go through the process of unbolting it each time its used (meaning crawling under the trailer). The same is true for their Self-Locking Wheel Chock # MT70271. If your transport is a one-time or occasional event you might instead consider a pair of basic rubber chocks like...
    view full answer...

  • Recommended Wheel Chock and Tie-Downs for Honda Trike in Toy Hauler Trailer
  • There are many manufacturers of Toy Haulers that have great products but Jayco, Forest River, and Keystone are probably the 3 that we see the most of with happy owners. Whenever you do settle on one, I recommend you use a MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271 to keep your trike positioned well when traveling. 1" x 18" Tie-Down Motorcycle Assist Straps # 06303 along with Erickson Motorcycle and ATV Tie-Downs w Soft Ties and TCS Buckles...
    view full answer...

  • Is There a B&W Biker Bar for a Honda Goldwing
  • I do have an option for you to secure your Honda Goldwing but B&W does not offer a Biker Bar for this bike. Instead, the best option we have for you is the MaxxTow Adjustable, Self-Locking Wheel Chock part # MT70271. The reason that this is the best wheel chock for you is because it has tie-down eyelets on the base, it can be bolted directly to the trailer floor, it will accept different wheels sizes, and there is no interference issues with your front brakes. In order to then secure...
    view full answer...

  • How Many Holes Get Drilled to Install the MaxxTow Adjustable, Self-Locking Wheel Chock # MT70271
  • According to the installation instructions you will use 4 attachment points when installing the MaxxTow Adjustable, Self-Locking Wheel Chock # MT70271 to your trailer. So you will need to drill 4 holes.
    view full answer...

  • MaxxTow Adjustable, Self-Locking Wheel Chock Item # MT70271 Center Section Width
  • I went out to the warehouse to measure the MaxxTow Adjustable, Self-Locking Wheel Chock # MT70271. The inner width is 9-3/4 inches and the outer width is 10-1/8 inches. I have included a picture showing these measurements for you. This also can accommodate tires up to 22 inches in diameter and 5 inches in width.
    view full answer...





  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality wheel chocks for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate wheel chock information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Leah B
Photos by:
Jackie C
Expert Research:
Michael L
Written by:
Lindsey S
Expert Research:
Michael H
Installed by:
Jeff D
Expert Research:
Jameson C
Photos by:
Zach O
Updated by:
Sarah W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.