bing tracking image
  1. E-Track
  2. Erickson
  3. E-Track Wheel Chocks
Erickson E-Chock Wheel Chock for E-Track - Powder Coated Steel - Qty 1

Erickson E-Chock Wheel Chock for E-Track - Powder Coated Steel - Qty 1

Item # EM09162
lowest price pledge
Retail:$39.24
Our Price: $22.28
You Save: 43%
E-Track
Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Rust-resistant steel wheel chock helps stabilize 1 wheel of an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E-track fitting allows you to easily move the chock to different anchor slots on horizontal E-track. Call 800-298-1624 to order Erickson e-track part number EM09162 or order online at etrailer.com. Free expert support on all Erickson products. Guaranteed Lowest Price and Fastest Shipping for Erickson E-Chock Wheel Chock for E-Track - Powder Coated Steel - Qty 1. E-Track reviews from real customers.
  • All Info
  • Reviews (218)
  • Q & A (0)
  • Photos
  • Why etrailer?

Erickson E-Track - EM09162

  • E-Track Wheel Chocks
  • Erickson

Rust-resistant steel wheel chock helps stabilize 1 wheel of an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E-track fitting allows you to easily move the chock to different anchor slots on horizontal E-track.


Features:

  • E-track wheel chock helps stabilize 1 wheel of a vehicle that's tied down in your truck bed or trailer
    • Works great for race cars, hot rods, ATVs, UTVs, and more
    • Pairs perfectly with E-track tie-down straps (sold separately)
  • Movable chock can be installed anywhere along horizontal E-track (sold separately)
    • Pull spring-loaded lever to quickly secure chock to E-track anchor slot
    • Remove and reinstall chock as needed
  • Durable steel construction
  • Yellow powder coat finish is corrosion resistant


Specs:

  • Quantity: 1 wheel chock
  • Overall dimensions: 8-1/2" long x 6-3/8" wide x 4-1/2" tall
  • 90-Day warranty


E-Chock Being Installed on E-Track

The E-Chock helps stabilize race cars, hot rods, ATVs, UTVs, and other wheeled equipment that's tied down in your truck bed or trailer. And unlike other wheel chocks that have to be permanently installed, this wheel chock can be quickly and easily moved to different anchor slots on horizontal E-track (sold separately). This means that you can easily adjust your setup depending on what you're hauling. The spring-loaded lever on the E-track fitting lets you snap the wheel chock into place and then remove it when you need to install it into a different anchor slot. This chock is perfect for use with E-track tie-down straps (sold separately).



09162 Erickson Manufacturing Moveable E-Chock E-Track Wheel Chock - Steel - Qty 1






Customer Reviews

Erickson E-Chock Wheel Chock for E-Track - Powder Coated Steel - Qty 1 - EM09162

Average Customer Rating:  4.8 out of 5 stars   (218 Customer Reviews)

Rust-resistant steel wheel chock helps stabilize 1 wheel of an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E-track fitting allows you to easily move the chock to different anchor slots on horizontal E-track.

- EM09162
by:

Made in China ( what isn’t anymore) ordered these chalks because the versatility of towing different vehicles and wheelbases. the mounting slides are so tight and different from chalk to chalk that it takes a dead blow hammer to insert them into the slots that once they’re installed it would be very difficult to remove them. Not the simple well thought out idea it should of been.



- EM09162
by:

Great product.. I bought a 14' Aluma tilt trailer, and had some aluminum E-track installed. I can attach these Erickson E-Chock Wheel Chocks anywhere I need them. I load my Polaris and attach my Tire/wheel nets, and I'm ready to roll. These removable Erickson E-Chock Wheel Chocks also allow me to use the same trailer for many other things, like general hauling, motorcycles, kayaks, etc..



- EM09162
by:

These work very well when loading machine on trailer. They stop me so I don’t hit toolbox mounted on front of trailer



- EM09162
by:

Great Price Very fast shipping



- EM09162
by:

The Erickson E-Chock is a great addition to E-Track line of products. The E-Chock adds that additional stability for securing your atv/utv toys. Keep in mind still requiring tie downs. More than happy with product and highly recommended.



- EM09162
by:

Etrailer had the lowest price and shipping on these things. They work awesome. I use these on my e-track I laid down for my UTV. They click right in and sold. Drive right up to them and I’m perfectly in place every time and safely held in place for strapping down and hauling down the road. Worth buying of your moving a vehicle and want to keep things safe.



- EM09162
by:

Stops my Polaris UTV on our flatbed and keeps it in place.



- EM09162
by:

Terrible fitment . had to be installed with rubber malot. Difficult to remove.Should have been individually wrapped. Beat up in transit arrived loose in box.


Comments
Thank you for your review. In the future, etrailer.com will take care of any products damaged in shipping. Also, this item has a 90 day warranty.
-- Etrailer Expert Sierra K - 07/06/2021


- EM09162
by:

These worked perfect for wheel stop and exact positioning on the trailer every. Great product that clicks in out out with ease.



- EM09162
by:

Amazingly secure, the only proper way to haul your vehicles I love them!



- EM09162
by:

Good pricing, product and quick shippin g...



- EM09162
by:

Excellent product



- EM09162
by:

Works good, makes loading easy



- EM09162
by:

Work great, little small for the 35" tires on my RZR but it helps line it up.



- EM09162
by:

Just received the E-Track chocks for my cargo trailer. They were back ordered but everything else I ordered arrived quickly and in good shape. The chocks took a little while but the communication was very good from Cathy T. at etrailer, the customer service is outstanding.



- EM09162
by:

Looks like this would be a great item, but the E-Tracks on my trailer are recessed by 1/2" and I can not attach the stop to the current e-track. I may try putting some track higher so this could attach



- EM09162
by:

Great products and service



- EM09162
by:

Ready to haul!!



- EM09162
by:

Works very well



- EM09162
by:

Great product, works on our enclosed trailer as well as our open trailer. etrailer is also great to work with, they communicate with their customers and making the buying experience easy.



- EM09162
by:

These E-Track chocks have proved invaluable in being able to re-load my car in the trailer back to the same location every time. Trailer balance is important and knowing the clearances to the front and back of the inside of an enclosed trailer is key. Once establishing the best location for these criteria, easy repeatability takes a big load off knowing you're properly positioning your car.



- EM09162
by:

Nice finish. Works great.



- EM09162
by:

BOUGHT THE E-CHOCK TO LET ME KNOW WHEN TO STOP IN THE TRAILER. IT IS VERY WELL MADE AND HOOKS INTO THE E-TRACK FAIRLY EASY CONSIDERING THAT YOU HAVE TO HOOK THE FRONT AND BACK INTO THE E-TRACK. ONLY DOWNSIDE WAS THE LONG WAIT BECAUSE THE SUPPLIER DID NOT SUPPLY THEM TO ETRAILER...WAIT WAS ABOUT SIX WEEKS.



- EM09162
by:

My order was shipped and delivered very promptly. I haven't had a chance to use it yet, but it seems to be quality products.



- EM09162
by:

Sturdy product works well


28
225
Show More Reviews

Ask the Experts about this Erickson E-Track



  • Tie Down Solution for Corvette on Open Car Hauler
    This question is refined by several decisions. What will you use for tie down points on the Corvette? What will you use for tie down points on the trailer? How easy do you want it to be. Finally, what looks good. If you are OK with climbing under your car each time to hook into the car and then connect to the edge of the trailer, you can simply use the QuickLoader # Q64FR ratchet straps. You will need to consult your Owner's Manual or Manufacturer for appropriate tie down locations...
    view full answer...
  • Can Wheel Nets or Wheel Straps be Used With Wheel Chocks on E-Track
    You can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track # EM09162 (this is a quantity of one strap but can be ordered in a pair at part # EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs # 77314 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523. For a kit I recommend the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel...
    view full answer...
  • Will the etrailer Horizontal E-Tracks Work for Securing a Vehicle and Does Every Hole Need Be Used
    The etrailer Horizontal E-Tracks like part # e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part # EM09162-2 and Erickson E-Track Strap with Ratchet part # EM59136. I don't really have an exact answer for you in regards to the number of screws needed as this has been difficult information to get from the manufacturer sicne there are soo many variables but the closer you are to the weight capacity of the track, the closer you...
    view full answer...
  • Chock and Strap Trailer Tie Down System For A 2016 Polaris RZR With 32" Wheels
    To secure an ATV with 32" tires to a trailer a few components are needed for worry-free transport. The Erickson Horizontal E-Track part # EM59150 is a great system for securing a variety of items, not just your RZR. For your specific need, a set of wheel chocks and tie downs like the Erickson E-Chock Wheel Chocks for E-Track part # EM09162-2 and the Erickson E-Track Strap with Ratchet # EM59136 are needed. In total you need 4 tracks, 2 wheel chock sets, and 4 tie down straps to secure...
    view full answer...
  • Can E-Track be Installed in Car Hauler for Multiple Car Widths
    You can install the Erickson Horizontal E-Track # E19148 in any manner you like, so for a car hauler that has cars of different widths you can place E-track side-by-side, as you can see one of our customers did in the accompanying photo. This E-track is only 5-1/8" wide so you can install numerous different tracks to meet as many widths as possible. For additional support I do recommend using the E-Track Backing Plate # BPEZ during your install. This would be the best option and then you...
    view full answer...
    Image 1 for
  • What Does Working Load Limit Mean for E-Track
    Good question and the 2,000 lb working load limit (WLL) of the Erickson Horizontal E-Track such as the 5 foot # E19148 is the safe limit for the weight of the cargo the track is helping secure. To simplify, it is the cargo capacity that the track can safely handle so you do not want to exceed it. However, the 2,000 lb limit is per track, so that means if you put down two tracks horizontally, your WLL would go up to 4,000 lbs. This track cannot actually be welded on, it needs to be secured...
    view full answer...
    Image 1 for
  • How is the Working Load Limit Calculated on the Erickson EM58523-09162-4?
    I spoke to Erickson and they were very informative. That being said, the Breaking Strength and Working Load Limit will be the same for every manufacturer with the basic rule to ensure safety of 3:1. So with the # EM58523-09162-4 having a breaking strength of 3,300 pounds, the safe working load is therein 1,100 pounds. I did also ask if they had anything similar to these in a higher capacity, but they do not have anything at the moment. The e-track connections do limit the maximum weight...
    view full answer...
  • How Does Smart Fortwo Get Secured to Aluma Trailer Using E-Tracks
    I attached the picture I believe you were referencing for securing a Smart car too a Aluma trailer using E-track. The straps used in the picture are the Erickson Adjustable Wheel Net with E-Track Fittings # 77314 which basically just snap into place into the slots of the E-tracks and then the ratchet tightens the straps to the tires. I also attached a second picture that shows a closer angle for you to check out to see more. We also have wheel chocks that fit into e-track as well that would...
    view full answer...
    Image 1 for Image 2 for
  • How Far Apart Are Mounting Holes For Erickson Horizontal E-Track EM19147
    The mounting holes are 2 inches apart, and to ensure its full capacity we do recommend screws in every mounting hole for the Erickson Horizontal E-Track # EM19147. While we do not have the mounting hardware, the mounting holes are 1/4" diameter, so that's the size you'd want, with the correct length depending on how thick your wooden planks are; just be sure to get wood screws which I'm sure you knew but I just wanted to be thorough for you. This will work great with the Erickson E-Chock...
    view full answer...
  • Availability of E-Chock Wheel Chocks and E-Track Strap for Honda SXS With 32 Inch Tires
    While we do have separate E-Chocks available like the # EM09162, they require E-Track rails like the # e65VR. Unfortunately, the E-chocks with the E-track slots are only available with the # EM98CV tie-down kit. There is also no way to substitute the straps in the kit. We do have longer straps available like the Erickson E-Track Strap with Ratchet # EM59136. This strap is 12' long x 2" wide and has a safe working load limit of 1,165 lbs.
    view full answer...
  • Hardware For Installing E-Tracks on Marine Plywood Trailer Deck
    Because of their versatility there isn't a specific type of wood screw that's recommended when installing the Erickson E-Tracks like # E19148. The screw length will depend on the thickness of your trailer deck but for thinner marine plywood I do recommend adding Backing Plates # e96RR to reinforce the connection. I have attached a sample install video as well that you might also find helpful.
    view full answer...
  • Weigh Safe 2-Ball Mount With Built-In Scale Perfect for Car Haulers
    The Weigh Safe # WS6-25 that you referenced in your question is made for a 2-1/2” hitch receiver and your F150 will have a 2” receiver opening. Instead you will want the Weigh Safe # LTB8-2 mount. The Weigh Safe mount is the perfect solution for a car carrier trailer. The adjustable height shank will allow you to set the correct hitch height so your trailer rides level with your tow vehicle. When you have your trailer leveled you can weigh your trailer when fully loaded at a commercial...
    view full answer...
  • Are the Erickson Horizontal E-Tracks Strong Enough for a 5,000 lb Vehicle
    Yes, the Erickson Horizontal E-Track part # E19148 will be plenty strong enough to secure your two rock crawler buggies. The tracks are each rated at 6,000 lbs max break strength and 2,000 working load limit. I assume you would have a track under each wheel so these figures would then be doubled. With that in mind, the weight capacity of these tracks in is regards to pull strength. The full weight of the vehicle should never be directly pulling on the tracks unless you were to hang them...
    view full answer...
    Image 1 for
  • Jeep Wrangler Tie Down Recommendation
    Thanks for your pictures! That's what Wranglers are meant for. At 4500 pounds, the weight of the secured cargo would exceed the combined safe working load limit of 1,100lbs per tire of the straps being used on the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks EM58523-09162. I would instead recommend the Erickson Car Tie-Down Kit # 08504-05. These straps feature twisted flat hooks that will help to keep the strap straight and flat along with...
    view full answer...
    Image 1 for
  • Can Wheel of Vehicle Rest on E-Track When Using Wheel Chocks
    Yes, the wheel of a motorcycle or bicycle can rest on an e-track no problem.
    view full answer...
    Image 1 for
  • Can Erickson Mini E-Track Plate be Used as Tie-Down for UTV or ATV
    Yes, you can use the Erickson Mini E-Track Plate # EM09134 with E-Track ratchet straps such as the CargoSmart Ratchet Straps for E-Track - 1" x 6' - 500 lbs # 3481717 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523, though you would not be able to use wheel chocks. I went out and test fit the plate with the Erickson E-Chock Wheel Chocks # EM09162-2 and found they would not fit. So if you were okay with not using wheel chocks - for...
    view full answer...
  • How To Secure a Can-Am Spyder On a Trailer
    I am not sure what products you are referring to but the most safe, secure, and easy tie down method we offer for your Can-Am Spyder is a combination of the Erickson Horizontal E-Track part # EM19147 (3), the Erickson E-Chock Wheel Chocks part # EM09162-2 (2 or 3), and the Erickson E-Track Wheel Tie-Down Strap part # EM58523 (3). The E-Tracks will get installed on the trailer and under each of the three wheels. You will then place the front E-Chocks on the E-Track to help you guide your...
    view full answer...
    Image 1 for
  • What Hardware Should I Use to Install Erickson E-Tracks
    Yes. A 304 or 18-8 bolt (which have the same makeup) will be sufficient to mount the Erickson E-Tracks # E19135 and carry your 1700-lbs UTV. I would also recommend using a the E-Track Backing Plate # e96RR to add strength and improve tie-down support. If you also need some wheel chocks that fit in these E-tracks, the Erickson E-Chock Wheel Chock # EM09162-2 make a great addition to your new E-track setup since they fit directly into the Erickson E-tracks and provide a solution to eliminate...
    view full answer...
  • E-Track Chocks and Tie-Downs for 32 Inch Tires on a Side by Side
    We don't have a kit for 32 inch tires but you can use a few short sections of E-track such as # EM19145 or # ET4S with Erickson E-Track Wheel Tie-Down Strap # EM58523. And you could add a couple of chocks for E-Track using # EM09162-2.
    view full answer...
  • Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires
    For your tires, I recommend going with the Erickson Wheel Net, # 77314. This wheel net will accommodate your front and rear tires and they will have more than enough capacity to hold your RZR to the E-track system on your trailer. Another items that we've found very helpful when loading ATVs and UTVs is the Erickson E-Chock, # EM09162-2. I typically try to park the UTV in the same spot over the axles to make sure I have the correct weight distribution on the trailer and these chocks make...
    view full answer...
  • Best Tie Down Method for Transporting Luxury Vehicles
    The best way to secure you Ferrari F430 to a trailer will involve an E-Track system. For this you are going to want a few items. First you will want a set of tracks like the Erickson Horizontal E-Track part # EM19147. You will want four of them, one under each wheel. You will then want to use a set of tie-downs compatible with these tracks and for that the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet part # EM58523 will be your best option. You will again want a...
    view full answer...
  • How Many Wheel Chocks part # EM09162 Would be Required to Secure Car to Trailer
    You would only need to use one of the E-Track Wheel Chocks part # EM09162 with the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet # EM58523 that you referenced. Only one chock would prevent the vehicle from moving. I would use at least two of the straps though just to be safe. Having them on all 4 wheels would be your best option.
    view full answer...
  • How to Secure a 2018 Harley Davidson Tri Glide to a Trailer
    In order to secure your 2018 Harley Davidson Tri Glide I recommend using the MaxxTow Adjustable, Self-Locking Wheel Chock part # MT70271 for the front wheel so long as it is not greater than 22" diameter or 5" wide. Then in order to secure the two rear wheels I recommend using an e-track system which is composed of the Erickson Horizontal E-Track part # EM19147 and the Erickson Adjustable Wheel Net with E-Track Fittings part # 77314. You can also add the Erickson E-Chock Wheel Chocks part...
    view full answer...
    Image 1 for
  • Are All of the E-track and X-Track Accessories Interchangeable
    That's a fine question. Unlike many things in this world the companies like Kinedyne, Erickson and Cargo Smart all made the tracks the same size! So luckily for us we can use any of the e-track or x-track accessories like the Erickson E-Chock Wheel Chock for E-Track part # EM09162 interchangeably. As a side note I really like X-Track or E-Track and find it to be extremely handy. Enjoy.
    view full answer...


< Previous
12



Do you have a question about this E-Track?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality e-track for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate e-track information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Leah B
Edited by:
Leah B
Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Zack K
Video Edited:
Zack K
Employee Kathleen M
Video Edited:
Kathleen M
Employee Cole B
Installed by:
Cole B
Employee Randy B
Installed by:
Randy B
Employee Mary E
Written by:
Mary E
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 800-298-1624