Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW

Item # FA94-00-0800

lowest price pledge

Retail:$402.00

Our Price: $367.00

You Save: $35.00
Weight Distribution

This item qualifies for Free Shipping

Shipping Weight: 82 lbs

Quantity: 
In Stock, Ships Today
Fastway Allows Backing Up Weight Distribution - FA94-00-0800
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • WD With Sway Control
  • 600 lbs
  • 700 lbs
  • Fastway
  • Fits 2 Inch Hitch
  • Allows Backing Up
  • Includes Shank
  • Reduces Sway
  • Electric Brake Compatible
  • Surge Brake Compatible
  • 2-Point
Dodge Ram Pickup weight distribution from Fastway. Product reviews from other Ram Pickup owners. Expert weight distribution advice with thousands of helpful questions and answers. Guaranteed lowest price and fastest shipping.


  • All Info
  • Reviews (286)
  • Q & A (123)
  • Videos (5)
  • Photos
  • Used (2)
  • Why etrailer?

Fastway Weight Distribution - FA94-00-0800

Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for stability and control
    • Creates a level ride for both tow vehicle and trailer
  • Integrated 2-Point Sway Control limits side-to-side movement
    • Brackets keep spring bars in place for a rigid system that holds trailer in line
    • Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
    • No lift chains - eliminate unwanted movement
  • Unique design makes system compatible with surge-type brake actuators
  • Round spring bars flex for a controlled, even ride
  • No-drill, clamp-on brackets can be adjusted along the trailer frame
    • Accommodates frame-mounted items such as gas tanks, battery boxes, toolboxes, or generators
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Powder coated steel construction is durable and corrosion resistant
  • Snap-up lever eases installation by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, sway control brackets, lift handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank
    • 1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation


Specs:

  • Tongue weight: 400 lbs - 800 lbs
  • Gross towing weight: 8,000 lbs
  • Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
  • Sway control bracket positioning: 24" - 27" back from center of coupler
  • Maximum trailer frame height: 6"
  • Shank length:
    • 8" From center of hitch pin hole to center of adjustment holes
    • 9" From center of hitch pin hole to front of shank
    • 7" From center of hitch pin hole to back of shank
    • 12" Overall
  • Total height adjustment along shank: 7-1/2"
    • Maximum rise: 5-3/4"
    • Maximum drop: 2-1/4"
    • Overall height: 8-1/2"
    • Holes are spaced 1-1/4" apart on center
  • 10-Year warranty


Dimensions

Included w/ SystemRequired - Sold SeparatelyOptional Add-Ons
  • Weight Distribution Head
  • 2 Sway Control Brackets
  • 2 Spring Bars
  • Snap-Up Lever
  • Spacer Rivet and Washers
  • Necessary Installation Hardware
  • Hitch Ball w/ 1-1/4" Diameter Shank
n/a

Weight Distribution Diagram

Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.



Selecting a Weight Distribution System

The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.


Fastway e2 Sway Control

The two points of sway control within the e2 are created by the steel-on-steel friction that occurs when the spring bars slide within the L-brackets that are mounted on the trailer tongue. Most traditional weight distribution systems have spring bars that are suspended by chains. Although this ensures that the system is not so rigid as to create bounce in the trailer, it also allows a good deal of side-to-side play in the system.


The direct friction that is applied to the spring bars in the e2 system helps to stop sway once it has begun. The concept is similar to the way in which an add-on friction sway control device functions. When each spring bar moves forward or backward, or side to side, it rubs along the bracket, creating friction. The resistance created by this action limits the movement of the spring bar, thus preventing further side-to-side movement of the trailer.


Most add-on units feature some sort of friction material similar to that used in automotive brakes. But the e2 uses direct steel-on-steel contact to create resistance. This is the same sort of friction that is used with locomotives that pull loaded railcars weighing tons. No additional materials are needed. The steel will outlast any of those other materials, providing an extremely durable, functional sway-control system.



94-00-0800 Fast Way e2 Weight-Distribution Hitch - Round Bar - 8K



FA94-00-0800 Installation InstructionsInstallation Details FA94-00-0800 Installation instructions

Video of Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Fastway e2 Weight Distribution System Installation - 2017 Chevrolet Colorado

Speaker 1: Today on our 2017 Chevrolet Colorado, we're gonna be taking a look at, and showing you how to install, the Fastway e2 Weight Distribution with 2-Point Sway Control, part number: FA94-00-0600. And that's gonna be for 6,000 pound gross trailer weight, along with a 600 pound tongue weight. It's also available with an 8,000 pound gross trailer weight and 800 pound tongue weight, using part number: FA94-00-0800. And also available with 10,000 pound gross trailer weight and 1,000 tongue weight, using part number:FA94-00-1000.Now, the way our weight distribution system is gonna work is, it's gonna take our tongue weight and it's gonna evenly distribute all that weight between the axle on our trailer and the axle on our truck. Now, this is gonna give us a stable ride, not only for our vehicle, but also for our trailer. Now, this is gonna allow for a smooth, level ride, and it's gonna allow us to tow the maximum capacity allowed by our vehicle's hitch.

Now, our weight distribution system is also gonna have sway control built into it. It's gonna have metal-to-metal contact, which is gonna create friction, causing less sway between our spring bar here, and the bracket attached to the frame. And that's gonna be real nice, because we're driving down the road and there's cross traffic, curvy roads, or any time we need to make an evasive maneuver, it's gonna keep our trailer in track with our vehicle in a nice line.We already talked about it having built-in sway control. Now, compared to the styles that use chains, those are gonna rely on a separate component that you're gonna have to install on your trailer to achieve that. Our system's also gonna come with an adjustable shank.

Now, in our position, we have it in the drop position, but you can also put it in the rise position to ensure that your trailer's gonna be nice and level when you're towing down the road. Now, the shank is gonna work with 2" by 2" receiver tube openings. Our weight distribution system is gonna feature our round bar style, opposed to the trunnion style, which makes it a little bit easier to install. And getting them in place or taking them out is simple. You just come to this spring clip here and we can pull out, and the bar will come right out.Compared to other weight distribution systems, our Fastway is gonna weigh about anywhere from 15-20 pounds less than others, which is gonna make installation just that little bit easier, and make it easier on your back.

Your system's even gonna come with a tool to help us get our spring bars in place so we don't have to fight them. Simply take the hook, hook it around the spring bar itself, and we can take this tab, put it in the hole, and rotate the bar up so we can get our spring bar in place. Now, what I really like about this weight distribution system is the fact that I don't have to drill into anything. Everything's gonna use brackets that are gonna sandwich in between the frame of our trailer, or it's gonna hook up into the hitch, and we're not gonna have to worry about welding or any kind of cutting.Our weight distribution system is gonna feature a steel construction, with a nice black powder coat finish to resist corrosion and rust. All the features that we've gone over so far are gonna apply to all three weight capacities of our Fastway e2 systems.

With everything hooked up, let's go ahead and take our truck and trailer and see how it handles. Once I pull it out I can tell you, I feel a difference. Going around the turn, it genuinely feels like the trailer wants to come back in line with my truck and track right behind it. And it genuinely just feels like it's a smaller trailer than it is, and just feels a lot more stable and safe.To begin our installation, you're gonna want to disconnect your truck and trailer, and you want to go ahead and pull out the ball-mount you've been using. Next thing we need to do is make sure that our trailer is sitting nice and level, and you can either take a tape measure or a level, and you want to make sure, front to back, that it's nice and level, and where it's gonna be towed at. You'll want to grab the head out of the packaging. Our kit's not gonna come with a ball, but you're gonna want to choose a ball that's gonna fit your coupler, and that's gonna have a long enough shank to go through so we can mount it. Now, with the ball loosely in place, we can go ahead and put the lock washer and nut on. Now we're gonna need to put the ball in the vise so we can tighten this nut down without it spinning. Now, in order to torque our nut down, you're gonna need a thin wall 1-7/8" socket so you can get it in between on the head here, and you're also gonna need a torque wrench that's capable of going up to about 450 pounds. So we're gonna go ahead and torque this. And if you don't have these tools available, I suggest you take it to a shop that can install the ball for you.Once you have your trailer level and the ball is mounted, you want to come up and you want to measure from the ground to the top of the coupler on your trailer. And you're gonna want to either write down that measurement or remember it. Now, every trailer's gonna be a little bit different, but you just want to make sure that it's nice and level, and you measure from the ground to the top of the coupler. Now, you're gonna want to take the adjustable shank and you're gonna put it into your hitch, and secure it with the pin and clip. If we look at the back of our head, we're gonna have a bolt on the bottom and a hole in the top right here. Now, we're gonna want to grab our spacer rivet, and we're gonna start with six spacer washers here. And we're gonna slide the washers onto the rivet, and then we're gonna slide the rivet into place. And we're gonna need to get the head in place on the shank, and you're gonna want to get that top of the ball as close to that measurement as you can, and then you're gonna see where the corresponding holes line up, and then we can get some hardware in place.Now, the way we're gonna be attaching the head to our shank here, is gonna be with this 3/4" bolt and a conical tooth washer. You're gonna want to slide the washer onto the bolt, making sure that the teeth are just gonna face the channel right here. So once you figure out where it needs to sit . in our application we're gonna be using the second hole from the top. So we can take our bolt, slide it through, and it'll help support it a little bit. Now, once the bolt's through, we're gonna take another one of our conical tooth washers, slide it over the bolt, and then secure it with a lock nut. And we're gonna repeat that process for the bottom hole, wherever it may line up.At this point, we're gonna want to snug up our bolts. We don't want to tighten them down all the way, just hand tight a little bit snug. So I'm gonna come back with an 1-1/8" socket for the bolt head, and then 1-1/16" wrench to hold the nut on the other side. The bolt at the bottom of our head here, we're gonna grab a 15/16" socket, and we're gonna tighten it up until it makes contact with the shank. But also, we're gonna tighten it up until that rivet with the spacers is also making solid contact, as well. Now, once that rivet is making solid contact with the shank, we're gonna want to turn that bolt one more half turn.We're gonna have to take a few measurements along the frame and the tongue of our trailer here, so I'm gonna go ahead and remove the cover for my tanks just to make it a little bit easier to see what I'm doing. From the center of our coupler, we're gonna go along the frame here, and we're gonna measure out to 27", and then we're gonna mark a spot on our frame on both sides. Now, every trailer's a little bit different, but where we had that 27" mark, it was gonna interfere with our gas tanks here. So we removed the gas tanks and just moved the tray forward with the self-tapping screws. You need to determine if your coupler is top-mounted or bottom-mounted. And what I mean by that, the coupler on here is mounted to the top of the frame; it's gonna determine how you mount your sway bracket assembly.So we can go back to that 27" mark now. We'll go ahead and grab our link brackets here, and the one with the two studs, that's gonna be on the outside of our frame here. And we're gonna put it against our frame, and the edge of it should be lined up with that 27" mark. Now, you want to make sure that the L with the studs coming out are going towards the outside of the frame, and are towards the top of the frame. And you want that single hole at the top. So we can grab our other bracket, and you want to watch for any electrical lines or anything else that's on the inside of the frame there.And then we can take our 1/2" by 4" bolt, and we're gonna slide it through both brackets. With the bolt through, we're gonna come back with a lock washer, slide it over our bolt, and secure it down with a nut. We're gonna take another one of our 1/2" by 4" bolts, and we're gonna want to go through the hole closest to the frame of our trailer. So if you can't get it through the hole, or if it's just half of a hole, you're gonna want to use the next available one. Just stay as close as you can. And we're gonna be securing it with the same hardware; a lock washer, followed by a nut. You're gonna want to make sure that the edge of your plate is right at the edge of that 27" mark that we made, and you're gonna want to have the two brackets laying flat against the trailer frame, and you're gonna tighten down those nuts hand-tight for right now. And we'll repeat that for the other side, as well.We're gonna come back with a 3/4" socket and wrench, and I'm gonna start tightening up my bolts. Now, when you're tightening these up, you want to tighten them up a little bit, and then alternate to the other bolt so that it doesn't start bowing out or getting bound up. Now, we're gonna get these nice can snug, and you're gonna want to come back with a torque wrench. We're gonna torque down our bolt to the specified amount in the instructions. And again, you want to go back and forth, alternating between the two, so you don't get a weird bind or a bow in your plates. We'll go ahead and tighten and torque the other side, as well. So, we're gonna grab our L bracket, and initially we're gonna set it up, we're gonna leave two holes at the top. So we're gonna slide those studs through our L bracket, and we'll secure it down with some nylon lock nuts. And we'll go ahead and put the other one on the other side. I'm gonna come back with a 3/4" socket and snug up the nylon lock nuts. I just want to mention, we don't want to tighten them up all the way, we just want them nice and snug. We'll snug up the other ones too.We're gonna need to put our spring arms in place, but before we put them in, we're just gonna take a little bit of grease and just put a thin layer around the notched end that's gonna be going into the head. Then we're gonna take that notched end, and if we come to the bottom of our head, we're gonna push it into place. And we'll see that it locks in and it won't come out unless we pull on the release tab. Now, we're gonna put the other arm in place, as well. At this point, you're gonna want to back your truck up, and hook up to the trailer. You want to lower the tongue onto the ball, and until the jack is coming up off, and make sure that's locked into place.Once we have our trailer coupled to our truck, we're gonna take our spring arms and we're gonna get them on top of our L brackets here. Now, if you've reached the top of your jack, and you don't have anymore room to lift it, they're gonna give you a tool that comes in our kit. We're gonna be putting that right in that square hole, and we're gonna take our spring arm and put it in the pocket. And then we can lift upwards. And once it's sitting there, we're gonna take our L-shaped pins, slide them down to the square hole, then secure it with a clip. And you're gonna do that on both sides. Now you're gonna go ahead and lower the jack back down so your trailer is back on the weight of your hitch, and you're gonna want to look and see that you have a minimum of 3" on your spring bar here to the L bracket.Now with the weight distribution installed, we're gonna need to make sure that it's adjusted properly. Now, you're gonna want to uncouple your trailer from your truck, and you're gonna want to take the measurement from the ground to the inside top edge of the thunder well here. After you have that measurement, you're gonna hook up to your trailer with the weight distribution in place, and you're gonna take that measurement again. Now if it's too little and the front end is coming up, we're gonna need to adjust it. But if it's pushing it down, we're also gonna have to make some adjustments. The second measurement after we have it hooked up, you're gonna want it to be as close as possible to that original height measurement. And if you are, you're ready to go.Now, after our initial setup, we found that we do need to make a little bit of an adjustment, because it's pushing the front of our vehicle down. And if we look at our spring bar here, it's kind of slanted up, and we want that nice and parallel with the frame on our trailer. So we're gonna be loosening these bolts, taking the spring bar off, and then moving this down. If your spring bar is sitting nice and parallel, or you just need a little bit of adjustment, we're gonna go to the back of the head and you're gonna need to remove the bolts and uncouple the trailer. And you're gonna be removing the spacer washers from the back here. And then you're gonna want to hook everything back up and remeasure and check everything.Once you have your weight distribution set up the way you want it, your front measurement and your fender is back to original height, and the tongue on your trailer is sitting nice and level, we can go ahead and take everything back apart one more time and do our final tightening. So I'm gonna come back to our brackets holding our L brackets in place, and tighten down the bolts and torque them to specification that we're gonna find in our instructions. And we're gonna do that for both sides. Finally, we can come back to our two 3/4" bolts coming though our shank, and we can tighten that up using a 1-1/8" socket and holding the nut on the back with a 1-1/16" wrench. We're gonna repeat that for the remaining bolt, as well. With everything torqued down, we can re hook up our trailer and put our spring bars and everything else back into place.And that'll finish up our look at the Fastway e2 Weight Distribution System with 2-Point Sway Control, on our 2017 Chevrolet Colorado.


Customer Reviews

Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW - FA94-00-0800

Average Customer Rating:  4.8 out of 5 stars   (286 Customer Reviews)

Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.

- FA94-00-0800
by:

Box was beat up by UPS, but hitch was not damaged. In the process of assembling it now. Looks like a great quality hitch. Will follow up after installation. 674878



- FA94-00-0800
by:

Used this product on a Lexus RX350 to tow an AR-One 15rb. Product works as I had hoped. Initial setup was straight forward, following the instructions. Hitch came quickly and parts fit well together. After first camping trip, made a small adjustment on the hitch to "level" trailer. Would recommend this hitch to others. 585149



- FA94-00-0800
by:

Very helpful salespeople. Products are priced competitively. Folks in the packaging department need to take more care - my hitch receiver had the powdercoat rubbed off in (3) places and the load leveling hitch destroyed the styrofoam packaging due to the heavy weight of the components. HEY, BUY SOME BUBBLE WRAP! It's cheap and does the trick. 569837



- FA94-00-0800
by:

Customer service and Shipping were awesome. Finished this up today. Not quite as easy as the videos make it look. Maybe just one more minor adjustment. I will definitely be a returning customer to etrailer.com. Very happy so far. 312233


Comments

Still very happy with the product. It works very well.

Jay W - 11/01/2017

30267

- FA94-00-0800
by:

The Fastway Weight Distribution Hitch with anti-sway works great. I installed Firestone Airlifts to my suspension as well. Very stable ride. The combination of air bags and WDH makes us feel a bit safer as well. It's fun to see folks on the highway who got it right, as opposed to those that didn't. This hitch may be load rated a little high for my set-up though - not much flex to the 8,000 lb. bars. We're pulling a 2003 Casita Spirit Deluxe with 2001 Isuzu Rodeo with only 205 HP...We are taking a two week trip next month. After, we will purchase a Toyota TRD Off Road Premium for the next trip - a little more HP and modern electronics! I think the Fastway the best setup for the money. We could have sprung for the Anderson system, but, why? This one does what is supposed to do. The only thing I would like to see improved is the noise it makes when turning corners sometimes. The bars make a pretty loud screeching sound. Like a large metal cattle gate with rusty hinges opening real slow. Any ideas on how to quiet this down? We're not supposed to lubricate. That would take the safety out of the anti-sway. Thank you Lisa D. for all of the time spent with me figuring out the best options for our needs. 517499


Comments

The noise you hear is caused by the metal-on-metal friction caused by the downward force applied to the frame brackets by the spring bars. This friction is what provides the sway control. As you mentioned, lubricating the contact points would completely defeat the sway control feature. Unfortunately, the noise is just the nature of the beast with this type of product.

-- Mike L - 06/06/2018

39322
Comments

Working out well. I think I would order the 6,000 lb. Round bars if I had to do it again. The 8,000 lb. Bars ride a little rough. I now have a 2018 4runner for a TV and not using air bags. Much better in terms of HP and ride.

Michael - 06/04/2019

56135

- FA94-00-0800
by:

All though I have hardly gotten to use the hitch I am very please with it. I have installed it on my 2013 1985 Lance TT being pulled with a 2012 Jeep Grand Cherokee. e-trialer has been great the customer rep handling my order expedited my order, without being asked, and the hitch was delivered to me in Oregon in 6 days, just in time for the delivery of my new TT. etrailer had the lowest price for the hitch and thanks to the free shipping it came in under anyone else. Thank you keep up the great work. Chuck 68518



- FA94-00-0800
by:

The Fastway E2 hitch works great and was really easy to assemble. Just had a hard time getting the ball and nut on because there isn't a socket that fits in the location the nut sits. So we put a pipe wrench on the ball side. Other then that, this hitch is built well and you can back up with it all hooked up, it bolts on easily and serves 2 purposes. The lady from etrailer.com that I spoke with was the best of all. She has the know how and experience to get me set up with the proper size hitch. Or I would have done the bigger is better thing. 236657


Comments

Great!

E. P - 01/30/2017

22342

- FA94-00-0800
by:

The Fastway e2 Weight Distribution hitch has been excellent for towing my 5000lb travel trailer, and was a good deal here on etrailer.com. The 2 way sway control keeps everything steady, and is the best I have ever used in my many years of towing travel trailers. The only problem I have experienced with it, is that when pulling out of Gas Stations or anywhere there is a small curb or gutter, it tends to drag. This usually causes the sway bar mount to get knocked out of alignment. 453910


Comments

Still working great after a year and many miles.

Raymond - 11/30/2018

46243

- FA94-00-0800
by:

Great weight distribution system. Works well with my travel trailer. Install was easy and quick. I got it done within an hour. 307673



- FA94-00-0800
by:

Works great, setup was easy and the stability it added was awesome. The campers has twice the service area as the tow vehicle, and even in crazy hurricane season winds in Florida I didn't sway in the least. The unit itself is an awkward shape and I had a hard time installing the ball. There is not enough room to use a standard socket to tighten the nut, and using wrenches was time consuming and aggravating so one star for that. Once your past that hurdle though it is a great product and recommended. 484610



- FA94-00-0800
by:

An absolutely fantastic product! This Weight Distribution System was purchased in conjunction with a tongue weight scale. Between the two, what had been an outright scary towing experience it now extremely pleasant in comparison. I recently installed the system and towed my show car in an enclosed 20’ trailer over 250 miles. I experienced none of the sway previously experienced during crosswinds or when semis past by. No more than I experience with just the truck sans trailer on the open road. I now feel safe, secure and confident. I have a short-bed, regular cab pick-up and tow a 20’ enclosed car transport, GVW of the trailer and show car varies between 6,000 and 7,000lbs depending on which car I’m showing and the supplies placed in the trailer. 117552



- FA94-00-0800
by:

Has worked real good for a first time puller. Self installed, with a little help from the pros, but easy hook up and go. Feels real nice on the road, but not real familiar with pulling a trailer without one. Much better to buy and install than the fortune the dealer wanted to charge me. 334506



- FA94-00-0800
by:

Bought this hitch for a newly acquired 24’ travel trailer. I liked the idea of the simple flat bars that reduce sway and distribute load. Long story short my trailer ended up whipping uncontrollably and I luckily was able to keep it upright despite being up on two wheels (tandem axel). I will admit I was negligent in not hitting the brakes on my brake controller being new to the travel trailer world. However I setup the hitch exactly how the instruction manual said. DO NOT BUY THIS PRODUCT! If you insist on buying a weight distribution hitch with sway control buy one with a separate adjustable sway controller. Etrailer please don’t continue advertising this product as having any type of sway reduction. This product almost killed my family and I. BUYER BEWARE! 495159


Comments

Im sorry that you had that experience, Ive been there myself, and it is indeed frightening! Let me begin by saying that the Fastway e2 Weight Distribution system does indeed offer a proven sway control component by the pressure exerted by the spring bars onto the trailer frame mounted brackets. In a good, better, best scenario, Id consider the e2 at the high end of better. So, given this, there are many things that could have potentially caused the sway occurrence you experienced, such as initial adjustment of the system, the way the trailer is loaded and using a system thats improperly rated for the trailers tongue weight which should include the weight of gear in the truck bed behind the rear axle. The setup of the system could be adjusted further for maximum effectiveness. Check that the trailer is being towed so that its as close to level as is possible. The tension placed on the frame brackets can be increased by tilting the trailer ball rearward. Increased tension equals more sway control. If tilting the ball rearward puts the trailer tongue below level, you can raise the weight distribution head on the shank by one set of holes. Improper loading of the trailer with too much weight in front of the axles can cause sway, but this happens more with cargo trailers. Having an improperly rated weight distribution system can lead to a swaying trailer. Weight distribution systems are rated for a range of tongue weights, usually a 400-600 lb spread. Ideally, youll want your trailers tongue weight which includes anything stowed in the bed of the truck behind the rear axle to come as close as possible to the midpoint of the systems effective range. For instance, this particular e2 system is rated for tongue weights between 400-800 lbs. Many folks neglect to include the weight of gear behind the rear axle of the tow vehicle when choosing a system, which can lead to an overloaded system. Ideally, for this system the trailers tongue weight should be around 600 lbs. These are the primary reasons for trailer sway, but there are other possibilities such as pavement condition, improperly inflated trailer tires, worn or damaged suspension components or something as simple as the occasional straight-line wind gust running perpendicular to the highway. Ive linked to our Weight Distribution/Sway Control FAQ article, which contains more information about the differences between systems, as well as additional information about how weight distribution and sway control work. As mentioned earlier, the e2 is a pretty decent system-theres only a few Id consider better. The Reese Strait-Line system, # RP66084
Strait-Line Weight Distribution System w Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
$584.37
for tongue weights ranging from 600-1200 lbs or # RP66083
Strait-Line Weight Distribution System w Sway Control - Trunnion Bar - 10,000 lbs GTW, 800 lbs TW
$618.15
for 400-800 lb tongue weights. The Strait-Line is what Id consider top of the line, it will force the trailer to stay in line behind the tow vehicle, unless you make a deliberate turn. Another option that Id consider are the Equal-i-zer systems like the # EQ37120ET
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
$700.06
for an 800-1200 lb tongue weight trailer or # EQ37060ET
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
$657.95
for a 200-600 lb tongue weight or # EQ37100ET
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
$657.95
for 600-1000 lbs of tongue weight. This system operates similarly to the e2, but instead of sway being resisted at 2 points, the Equalizer has a 4-point sway control, with the tension being applied at the point where the bars attach to the weight distribution head and the point where the bars contact the trailer frame brackets. A separate sway control unit like you mentioned, such as # 83660 is considered an-entry level sway control, will resist mild to moderate sway only, it would not be super-effective on a 24 foot travel trailer. If you have further questions or if we can be of assistance, please feel free to contact us.

-- Mike L - 04/24/2018

37629

- FA94-00-0800
by:

Very heavy duty, works well. 707931



- FA94-00-0800
by:

great products and service 708064



- FA94-00-0800
by:

This WD hitch works absolutely great .Was not difficult to install as long as you read and follow the instructions. Also they have a step by step video which is very helpful. It really made a difference and I felt more in control on the road. 678003



- FA94-00-0800
by:

Easy to setup good instructions 671997



- FA94-00-0800
by:

Wonderful product! Noticed a major difference when towing my 27’ travel trailer. With this you do not need to get out of your truck to disconnect anything to go in reverse. Last but not least, it is very easy to install! If you should have any questions, etrailer has great tutorials to help you along. 628156



- FA94-00-0800
by:

This distribution system works great. Easy to hookup and unhook. No more trouble with trucks passing or now, my passing trucks. Quality product. 622012



- FA94-00-0800
by:

Easy to install and use definitely a must have. 608079



- FA94-00-0800
by:

I didn't know anything about weight distribution and electric brakes . the rep's at E-trailer led me down the right path to give me safety and confidence in any situation I encounter in our travels(7 trips last year). Thank you. 601380



- FA94-00-0800
by:

Item arrived on time and all parts were there. Box was quite beat up though. Maybe should put item in shipping box instead of sending just the item in it’s selling box. Too much opportunity for parts to fall out of torn box. Otherwise would have left 5 stars. 599303



- FA94-00-0800
by:

The device is extremely well built but can be difficult to put on and off due to the way the arms connect to the hitch. It is also quite heavy. The good part.....as a new trailer owner it makes me feel safe and secure while towing on the highway. Gives me great peice of mind. 580797



- FA94-00-0800
by:

used these all summer with my new camper. worked fantastic, super easy, no sway at all. 580643



- FA94-00-0800
by:

Easy installation and removal. The hitch does what it is intended to do with the correct adjustments. I would purchase this again if I need to 571292



- FA94-00-0800
by:

Easy to hook my trailer and works well on the road 565158



- FA94-00-0800
by:

Hitch has been great. Love the design , no anti sway bar. Makes it great for backing in and superior road control. Would recommend for any rig! 522609



- FA94-00-0800
by:

No issues so far. A must for those who are towing. The price in etrailer is the cheapest I found and trust me I looked for a long time. 503438



- FA94-00-0800
by:

Great product! Works great. Would highly recommend. I'm pulling a Palomino Puma 19FS. Almost can't tell it's back there. :-) FYI.... be sure to have a 1 7/8" socket to install the ball. 495785



- FA94-00-0800
by:

Great customer service and great product. Exactly as advertised, I recommend the product and if you have questions about which weight range you need just call in the folks they're on point. 489859



- FA94-00-0800
by:

I will not be using this product for another month, but I will comment on the ease of purchase and the quick shipping. I have purchased items from etrailer in the past and they are definitely my "Go-to" source for trailer & towing items. Thank you for the wonderful customer service. 488458



- FA94-00-0800
by:

This weight distributing hitch is superb. It takes a little while to get it adjusted perfectly for your vehicle, but once you do it is extremely easy to use, and performs just as it should. It's well worth the money. 487278



- FA94-00-0800
by:

This hitch set up made all the difference in the world when compared to the previous heavy duty hitch with only a single sway control arm. No additional sway control was necessary, and the trailer now rides perfectly level and feels at one with the truck. etrailer helped me pick the best hitch for my needs out of the ones available. Much appreciated, and great service, as always! Thanks so much... 484939



- FA94-00-0800
by:

Actually all the welds broke on it and our trailer was only 3,500lbs. Did not hold up very well. We ended up selling it as well as our camper. Camper was too small and we currently have a new Rockwood on order. 474976



- FA94-00-0800
by:

Fast delivery. 472530



- FA94-00-0800
by:

Very satisfied 465098



- FA94-00-0800
by:

Works great, even can back up the trailer without unhook in the bars. I tow a race car on a 18 foot car trailer, car is a 70 model camaro with 572 cubic inch big block. I even unload the car without unhook in the bars. 453990



- FA94-00-0800
by:

This hitch solved my sway issue, and balanced the trailer load on my tow vehicle. Great product! 453437



- FA94-00-0800
by:

Works very good at weight distribution and helping with sway control. Once you get it dialed in with the trailer it's consistent and pretty much fool proof. Not for someone feeble as getting the trailing arms up into the bracket can be a handful and requires some muscle using the included "helper". Carry a rubber mallet with you to get the trailing arm off the bracket and help get the pins in place and you shouldn't have any problem hitching up. 444870



- FA94-00-0800
by:

Product, price and customer support is very good. Condition of packaging on every order I have received is horrible! 443993



- FA94-00-0800
by:

I followed the step by step instruction, had to do a little adjusting, but once I got it right it all worked perfect. Definitely makes a difference in how my pickup sits level when hooked to the trailer. put it to a good test with a gusty 30+ miles an hour side wind, it handled like a champ at 60 mph. Very satified. 443750



- FA94-00-0800
by:

I have been happy with the weight distribution. At times the anti sway needs to be readjusted depending on low the truck and trailer are loaded, but I am sure that it is the same with any system. Overall I am very happy with it, the price was reasonable and it was fairly easy to assemble. Customer service was very helpful confirming it was the right fit for my trailer and truck. 432563



- FA94-00-0800
by:

very pleased with purchase---performed as described good service and support 411731



- FA94-00-0800
by:

I am very happy with my transaction with this company. From start to finish I was treated with respect and was helped by some very knowing people. I have not used my hitch yet but it appears to be a quality product. It should be packaged a little better for shipping because it appears to have broken open during shipping and was taped up . However there was nothing missing. Very satisfied customer. 406527



- FA94-00-0800
by:

Easy to install. Seems to work. Will know better when I pull RV 389300



- FA94-00-0800
by:

Easy to install. Works very dependable with my RV. 381298



- FA94-00-0800
by:

Great hitch; was not happy with made in China But thats the way it is Great service and shipping as with everything I've got from E Trailer 374188



- FA94-00-0800
by:

Used this for the first time today, the system did exactly what it was supposed to do. Went down interstate with very little sway and really distributes the weight of the camper well. The customer service was great Shawn B really was very helpful and product arrived in two days. 371070



- FA94-00-0800
by:

We received our hitch pretty quick, we have enjoyed the service we have received from all. Thanks 369103



- FA94-00-0800
by:

we bought the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW - FA94-00-0800 from this company. Very nice people, excellent shipping will do business again with them 369097


57
300
Show More Reviews

Ask the Experts about this Fastway Weight Distribution

Do you have a question about this Weight Distribution?


  • Recommended Weight Distribution System for 4,500 Pound V-Nose Trailer
  • Since you do not have any frame space on which to attach sway-control brackets, I do recommend going with the Pole-Tongue Adapter # EQ95-01-5950 referenced in your question. This will let you mount the weight distribution system on your trailer tongue and can be positioned 27 to 32 inches back from the hitch ball. I have included an image that gives you a better idea as to how this will work. Then for the actual weight distribution system, we will first want to take an estimate...
    view full answer...

  • 2-1/2 Inch Shank for Fastway Weight Distribution on a Ford F-250 with 2-1/2 Inch Hitch Receiver
  • Fastway is made by Equal-I-zer so I recommend one of the Equal-I-zer 2-1/2 inch shanks: Shank # EQ90-02-4900 has a 10 inch rise or 6 inch drop Shank # EQ90-02-4800 has an 8 inch rise or 4 inch drop Shank # EQ90-02-4700 has a 7 inch rise or 3 inch drop I have linked a video review on one. The others will have the same features with the difference being the amount of rise and drop each offers.
    view full answer...

  • Troubleshooting E2 Weight Distribution Hitch Sway Issues
  • It sounds like the Fastway e2 # FA94-00-0800 or # FA92-00-0800 is the correct system for your 1/2 full trailer but not for your loaded trailer. You want a system rated for total tongue weight which includes the tongue weight of your trailer and any cargo weight behind the rear axle of your F-150. That total tongue weight will ideally be in the middle of the range of your weight distribution system, so your Fastway e2 is not the correct system for your needs. For a 1000 lb e2 upgrade...
    view full answer...

  • Weight Distribution and Brake Controller for 2019 Jeep Grand Cherokee Laredo with Tow Package
  • A weight distribution hitch will do more for your towing ride quality than the Load-Leveling system in your 2019 Jeep Grand Cherokee. Each does slightly different things to the vehicle. The Quadra-Lift air suspension system allows you to adjust ride height based on speed, road conditions and your preferences but it is not a substitute for a properly-rated and correctly-installed weight distribution hitch that will shift trailer weight forward to your front axle, where you need it for...
    view full answer...

  • Recommended Weight Distribution System for Trailer with 600 Pound Tongue Weight
  • The Equal-i-zer Weight Distribution System # EQ37060ET that you referenced is a truly excellent system that features a tongue weight range of 200 to 600 pounds. If you stay under the 600 pound tongue weight capacity, this system will be perfect for your Tacoma and Coachmen trailer. With that being said, if you think there is a possibility that you will exceed the 600 pound limit, which it seems might be the case, I recommend going with a slightly higher-rated setup. The issue with having...
    view full answer...

  • What is Difference Between Round Bar and Trunnion Fastway Weight Distribution System
  • Both round and trunnion bar systems are equally as effective, but a round bar system won't have as much ground clearance under it as a trunnion bar system. This is because the bars attach to the weight distribution head from underneath. If your tow vehicle is a full sized pick-up or SUV, a round bar system would work just fine. If you're towing with a small crossover or a minivan (anything with little ground clearance) you'd definitely want to go with a trunnion bar system. Typically trunnion...
    view full answer...

  • Can Round Bars on 8K Fastway System be Swapped Out to Make 10K System
  • Since the same head unit # FA94-02-1055 is used for your current 8K system # FA94-00-0800 and the 10K system # FA94-00-1061, you can certainly upgrade your bars to the 1,000 lb TW part # FA94-02-1099 for your new trailer. Just be sure to check your weight distribution shank. It should be rated for 12K but it never hurts to double check.
    view full answer...

  • Will Fastway e2 Weight Distribution Work For 2019 Coleman Light LX 1605FB Travel Trailer
  • The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA94-00-0800 is a great option for your 2019 Coleman Light LX 1605FB, and I'll explain why. The ideal weight distribution with sway control system will be one in which your total tongue weight falls somewhere in the middle of the weight distribution system's tongue weight capacity. Total tongue weight (or TTW for short) is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the...
    view full answer...

  • Parts Needed to Tow a Trailer With a 2010 Honda Odyssey
  • By all means, take your children camping! I took a look at the owner's manual for a 2010 Honda Odyssey and it looks like the maximum total trailer weight (the weight of your loaded trailer) you Odyssey can tow is going to depend on the number of occupants. According to the manual, the number of occupants is calculated at 150 lbs per person, so take that into account, though it seems likely your Odyssey will still have enough capacity for a 2,300 lb trailer, just be mindful of the amount...
    view full answer...

  • Replacement Round Bar, L-Pin and Pin and Clip for Fastway e2 Weight Distribution System
  • We have all the replacement parts you need for your Fastway e2 Weight Distribution System # FA94-00-0800, which has an 800 lb tongue weight capacity. Replacement Round Bar: # FA94-02-0899 Replacement L-Pin: # FA92-03-9205 Replacement L-Pin Clip: # FA92-04-9208
    view full answer...

  • Recommended Fastway e2 Weight Distribution System for Coleman Trailer and Brake Controller
  • The Fastway e2 # FA94-00-0800 has a weight capacity of 800 lbs as you mentioned, but weight distribution systems are rated for total tongue weight and have a range. The total tongue weight is the loaded trailer tongue weight plus any cargo weight behind the rear axle of your tow vehicle. If your loaded Coleman trailer is 540 lbs, then this system will work really well as your total tongue weight will be in the middle of its 400-800 lbs capacity. If you want slightly better ground...
    view full answer...

  • Will Weight Distribution be Needed if Using Roadmaster Active Suspension on a 2015 Silverado 1500
  • Suspension enhancement products such as Roadmaster Active Suspension # RAS3611-S serve a different purpose than weight distribution. Suspension enhancement is designed more for loads carried in the tow vehicle whereas weight distribution is meant to redistribute tongue weight from a trailer across all axles of the tow vehicle and trailer more evenly. The product to use to combat rear end sag is a weight distribution system. However, often times the suspension on 1/2 ton trucks will still...
    view full answer...

  • Which Fastway Weight Distribution Should be Used with Coleman 202RD Pop Up
  • The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. It sounds like you really have...
    view full answer...

  • Recommended Weight Distribution For Pulling 2016 Jayco x23b
  • This weight distribution hitch # C17062 is a great value and will work with your 2014 Dodge Durango. Just a heads up to be cognizant of your 2016 Jayco x23b's FULLY loaded trailer weight. I have attached an article on how to accurately measure tongue weight. This system can handle up to 1,000lbs in TW. The above system is rated for 800-1000lbs TW. If you fully load your trailer to 5000lbs and you have 15 percent tongue weight you will be under 800 pounds. If we add what you will have...
    view full answer...

  • Recommended Weight Distribution System With Sway Control For 21-Ft Trail Lite Camper
  • The best way to determine what system will work for you is to know what your total tongue weight is. The total tongue weight is the tongue weight of your fully-loaded-ready-to-tow trailer added to the weight of any cargo you place behind the rear axle of the tow vehicle. You will then want to find a system where your total tongue weight falls near the middle of the tongue weight range for the system. Getting a system that is too small will be useless, but getting a system that is too big...
    view full answer...

  • Replacement Spring Bars for Fastway E2 Weight Distribution System FA94-00-0800
  • Thank you for your purchases from etrailer, including that for the Fastway e2 Weight Distribution system # FA94-00-0800. You can change out the spring bars to give your setup a higher tongue weight (TW) rating to match your new heavier trailer. Ideally your loaded trailer TW will fall somewhere near the middle of the operating range for the system you're using. You can use two of spring bar part # FA94-02-1099 that you referenced to give your Fastway system a TW rating up to 1000-lbs.
    view full answer...

  • Recommended Fastway e2 Weight Distribution System for a Trailer that is 5,500 lbs GTW and 600 lbs TW
  • Weight Distribution (WD) systems are great, but it can be difficult to find one with the correct range sometimes. You are heading in the right direction when it comes to figuring out what WD system you will need based off of your Tongue Weight (TW) and Gross Trailer Weight (GTW). You will also need to add the weight of any cargo that sits behind the rear axle of your 2012 Silverado 1500 into the mix as well. When you add the TW of your loaded and ready-to-go trailer plus the weight...
    view full answer...

  • Recommended Weight Distribution System with Sway Control for 2017 Rockwood 2604WS Travel Trailer
  • Based on the tongue weight you gave me, I recommend you go with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW # FA94-00-1000 over the # FA94-00-0800. The reason for the upgrade is that your loaded tongue weight plus any cargo behind the rear axle of your Titan is what accounts for the total tongue weight used to determine a weight distribution system. The # FA94-00-1000 I'm recommending has a total tongue weight range between 600...
    view full answer...

  • Correct L-Pin and L-Pin Clip for Fastway E2 Weight Distribution System
  • For your Fastway e2 weight distribution system the part # FA92-03-9205 is the correct L-pin and the # FA92-04-9208 is the correct L-pin clip.
    view full answer...

  • Recommended Weight Distribution System for 6300lb Trailer w/ 550lb Tongue Weight
  • Your first step in choosing a weight distribution system is to identify the tongue weight of your trailer when it's fully loaded and ready to tow. This tongue weight figure should also include the weight of anything stowed behind the rear axle of the tow vehicle. These combined figures represent the Total Tongue Weight (TTW) of your set-up. The TTW of your trailer should fall as close as possible to the middle of the effective range of the weight distribution system you choose. I've linked...
    view full answer...

  • Curt Weight Distribution System Recommendation for 600 lb Tongue Weight
  • The tongue weight range of the Curt weight distribution system part # C17500 that you referenced is 800 to 1,000 lbs. If yours tongue weight is 500-600 lbs and you used this system you'd have a pretty rough ride quality. There aren't lighter rated bars for your setup so we don't have a solution aside from just replacing the entire system. The part # 17301 would be a great solution with a better range as it is for up to 800 lbs of tongue weight.
    view full answer...

  • Can Larger Shank Be Used with Fastway Weight Distribution Hitch
  • To use your 2-inch weight distribution setup in a truck that has a 2-1/2-inch hitch you can either add a reducer sleeve like # 58102 or # BWRHXA2182 to the hitch or you can change the shank to the larger size so it directly fits the 2-1/2-inch hitch. The linked page displays suitable 2-1/2-inch replacement shanks that will work fine with your WD system, such as # EQ90-02-4900 and # EQ90-02-4700.
    view full answer...

  • Quality Inexpensive Weight Distribution and Sway Control for 5.5K Jayco Travel Trailer
  • I have an excellent recommendation for you. Take a look at the Fastway e2 weight distribution system # FA94-00-0600. It is rated for up to 600 pounds tongue weight and 6,000 pounds gross trailer weight. It has built-in sway control and won't break the bank. The only part needed with this hitch is a ball, # EQ91-00-6100, for a 2-5/16 inch diameter. This hitch does allow backing up. Keep in mind that to choose a weight distribution system you will need to go by the total tongue weight...
    view full answer...

  • 2015 Ford F-150 Sags at the Back When Coupled to Trailer with 550 Pounds Tongue Weight
  • Sag at the rear of a vehicle such as your 2015 Ford F-150 can happen from 1 of 2 ways. First, weight in the actual truck bed can cause sag. Second, the tongue weight from a coupled trailer can cause sag. The ways to deal with the sag are different. When sag is caused by a trailer the recommended solution is weight distribution, not helper springs. Weight distribution will more evenly distribution the force of the tongue weight to all of the axles on the tow vehicle and trailer so it...
    view full answer...

  • Weigh Safe Hitch Ball Compatibility with Weight Distribution System
  • The Weigh Safe 2-5/16" Hitch Ball w/ Built-In Scale - Stainless Steel - 10,000 lbs GTW # WSUN-3 will not give you a correct reading when the bars of the weight distribution system are engaged. The ball will give a correct trailer tongue weight rating prior to the bars being engaged, but as soon as the bars are added the system will take any cargo weight behind the rear axle of the tow vehicle and disperse the tongue weight across the frame of the trailer. Using a weight distribution...
    view full answer...

  • Can Weight Distribution be Used on Vehicle with Auto Leveling Suspension
  • You will want to set the trailer on the hitch ball by itself first without the WD system attached to let the auto-level do it's thing. Once settled then you would go about setting up the system. For more information on that check out the install video I attached plus the install instructions link that is attached as well.
    view full answer...

  • Recommended Weight Distribution System for a 2018 Airstream Flying Cloud
  • In order to choose the correct weight distribution system, you will need to find the total tongue weight (TTW) of your towing setup by adding the tongue weight (TW) of both your loaded ready to tow trailer and any cargo stored behind the rear axle of the tow vehicle. An easy way to find this would involve using a tongue weight scale like the Sherline Trailer Tongue Weight Scale part # 5780. When choosing a weight distribution system, you will want your TTW to fall in the middle of the...
    view full answer...

  • What is Difference Between 800 and 1,000 lb Tongue Weight Fastway Weight Distribution Systems
  • The difference between the 800 lb tongue weight E2 Fastway Weight Distribution System part # FA94-00-0800 and the 1,000 lb tongue weight version part # FA94-00-1061 is the amount of spring bar tension either is rated for. The 1,000 lb kit has stiffer spring bars so that it can handle higher tongue weight capacities and the 800 lb kit has spring bars that aren't quite as stiff.
    view full answer...


Do you have a question about this Weight Distribution?


Used Items Available
RU-18-F0-00708410

Condition: Missing Parts

Notes: Item is missing one of the larger brackets and some of the hardware. Item has quite a few scuffs and scratches.

Our Price: $47.48

Secure Checkout
RU-19-F0-00108523

Condition: Installed

Notes: Item has been previously installed/test fitted and has visible install marks.

Our Price: $269.47

Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality weight distribution for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate weight distribution information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Installed by:
Joe V
Installed by:
Cole B
Updated by:
Dan D
Updated by:
Adele M
Updated by:
Shelly K
Updated by:
Sarah W
Updated by:
Amanda M
Updated by:
Mike S
Expert Research:
Michael L
Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video by:
Andrew K
Written by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Patrick B
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.