1. Weight Distribution Hitch
  2. Curt
  3. 700 lbs
  4. WD Only
  5. Fits 2 Inch Hitch
  6. Includes Shank
Curt Trunnion Style Weight Distribution System with Shank, 800 TW, 8,000 GTW

Curt Trunnion Style Weight Distribution System with Shank, 800 TW, 8,000 GTW

Item # 17301
lowest price pledge
Retail:$458.36
Our Price: $301.54
You Save: $156.82
Weight Distribution Hitch
This item qualifies for Free Shipping
Shipping Weight: 91 lbs
Quantity: 
In Stock
Curt 700 lbs Weight Distribution Hitch - 17301
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Product Expert Lindsey S

Is this right for you? Product Expert Lindsey S says:

Yes, if you:

  • Have a trailer with 600 lbs – 800 lbs of tongue weight
  • Don't typically have a problem with trailer sway

No, if you:

  • Want sway control out of the box
  • Have a taller tow vehicle and need a decent drop
This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank included. Hitch ball sold separately. Lowest Prices for the best weight distribution hitch from Curt. Curt Trunnion Style Weight Distribution System with Shank, 800 TW, 8,000 GTW part number 17301 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (20)
  • Q & A (34)
  • Photos
  • Why etrailer?

Curt Weight Distribution Hitch - 17301

  • 700 lbs
  • Curt
  • WD Only
  • Fits 2 Inch Hitch
  • Includes Shank
  • Electric Brake Compatible
  • Surge Brake Compatible

This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank included. Hitch ball sold separately.


Features:

  • Evenly distributes weight over axles of tow vehicle and trailer for stability and control
    • Creates a more level ride for both tow vehicle and trailer
  • Trunnion spring bars are constructed of solid, forged steel for strength and durability
  • Adjustable spring-bar tension - just switch links in lift chains to fine-tune
  • Desired tilt is achieved with traditional washer design
    • Add or remove washers from spacer rivet to tilt head up or down
  • Powder coated steel resists corrosion
  • Snap-up lever eases installation by reducing lifting required by trailer jack
  • System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
    • Hitch ball sold separately - requires 1-1/4" diameter shank


Specs:

  • Maximum tongue weight: 800 lbs
  • Maximum gross towing weight: 8,000 lbs
  • Application: 2" x 2" trailer hitch receivers rated for use with weight-distribution systems
  • Shank length: 12"
  • Bar length: 30-5/8"
  • Maximum drop: 1/2"
  • Maximum rise: 7-1/2"
  • Will not fit trailer frames wider than 2-3/4"
  • 1-Year warranty


Included w/ 17301Required - Sold SeparatelyOptional Add-Ons
  • Adjustable Shank
  • System Head
  • Lift Brackets
  • Spring Bars
  • Hitch Ball w/ 1-1/4" Diameter Shank
  • Bar-Style Friction Sway Control

Weight Distributing Hitch

Create a stable ride for your tow vehicle and trailer with a weight-distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.


Selecting a Weight-Distribution System

The tongue weight rating is the most important factor in determining which size weight-distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.


To determine the proper weight rating for a weight-distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight-distribution system.



17301 Curt Weight Distribution Hitch - Trunnion Bar

Installation Details 17301 Installation instructions




Customer Reviews

Curt Trunnion Style Weight Distribution System with Shank, 800 TW, 8,000 GTW - 17301

Average Customer Rating:  4.8 out of 5 stars   (20 Customer Reviews)

This weight-distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Shank included. Hitch ball sold separately.

- 17301
by:

I've been using WD hitches for almost 20 years. The Curt WD hitch is solid, sturdy, and simple to set up. I prefer the trunnion style and use a sway brake, also. This setup has never failed, regardless of the abuse it's subjected to.


Comments
I couldnt be happier with this hitch. It has performed exactly as expected, no complications whatsoever.
Matthew R - 06/11/2018



- 17301
by:

Fast shipping, great hitch, easy to install, remember to be patient when adjusting the first time. I shoulda measured for trunnion bar length before ordering. I needed the 28" not the standard 30". I've ordered from etrailer twice, and am very happy with their service. Will definitely order more in the future.


Comments
Fantastic hitch, worth every penny. You might need longer safety chains due to the added length.
David T - 03/20/2018



- 17301
by:

I have had my equalizing hitch for about a year now, and I have been very satisfied with this product. My hitch arrived as scheduled and in good condition. it was fairly easy to install (though I admittedly had help from my father-in-law!), and it is simple to hook up to my camper and truck. Prior to owning this hitch, my camper/truck would sag where they connected, and would cause extra stress on my brakes, causing the discs to overheat. My rig now sits much more evenly, and I have noticed a big difference in the amount of heat that is generated by my brakes. I am very happy with this purchase!



- 17301
by:

The product was received in good order and went together with the instructions. the product was put on a 2009 Yukon Denali and a 2017 24' Sportsman Travel Trailer. There are some questions about the tightening instructions of some bolts which I will call about.


Comments
Les,Thank you for your review. I contacted Curt for you. I have sent you an email with the specs needed. I hope this clears it up for you. The engineering department at Curt is working on getting the instructions fixed.
-- Etrailer Expert Heather A - 11/20/2017


- 17301
by:

Although it took five days for my order to arrive, even though I paid an extra 14.95 for two day shipping, two of the five days were weekend days. My order was intact and in perfect condition. High quality and priced right. Very satisfied with etrailer. I will buy from them again.



- 17301
by:

I don't have anything to compare it to - bought this before we even towed for the first time, but it seems to be doing what it's supposed to do! No problems with installation or usage to report. Very pleased.



- 17301
by:

Haven't tried it out yet but shipping was very fast. Will order from etrailer again.



- 17301
by:

System works well for my 7000lb trailer. Am happy with the product and it was a good price.



- 17301
by:

real fast in getting here......the box was in excellent condition



- 17301
by:

Works as expected...great value!!!



- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch


This is a great product! My truck almost rides smoother with my trailer hooked up then without the trailer. Installation was a piece of cake. 20 minutes after installing I saw first hand what can happen when you don't have a weight distribution hitch. As I was driving down the road pulling my travel trailer I noticed up ahead of me that there was a truck was pulling a heavy trailer coming towards me down a hill. The trailer began to sway and the truck could not handle it. The truck crossed into my lane and then back across the road going into a ditch and rolling over! Thankfully the people in the truck were okay, but the guy said he had is trailer loaded down too much and he didn't have a weight distribution hitch! As I was standing there calling 911 I looked over at my truck, and the whole setup from my trucks front bumper to the rear bumper of my 31 foot travel trailer was perfectly level. Safety first everyone! This is a great product!!



- C24UR
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch




- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch




- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch




- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch


Received the weight distribution hitch promptly when they said. Hooked up to the motor-home well & carried our truck & RZR smoothly! We are very happy with the overall service we received. Very professional, attentive to details, good follow-up, and excellent product! Would order something from E-trailer again, because the service was so good! Thank you!



- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch


Great price, seems more robust than other brands. Works great, no problems. I use it to tow new travel trailers from Indiana to all over the US. Helps with "porpoising" on some trailers.



- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch


Ok system, had to buy a longer shank for my set-up. Work fine but that's about it. After about 4k miles trying different adjustments decided to replace with a different system. FYI, I am near the top of the TW with this.



- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch


Gotta love "Curt" products! ......great engineering, priced fair (etrailer.com).......



- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch


Excellent System I have been very happy with this weight distribution system. It has performed perfectly and is built heavy duty for hauling. It is much stronger and built better than most of the systems that I looked at. A+



- 17302
by:

Review from a similar Trunnion Curt in Weight Distribution Hitch


Easy to use and works great


20
20

Ask the Experts about this Curt Weight Distribution Hitch

  • Sway Control That Works With Curt 17301 Weight Distribution System
    There is an anti-sway bar you can use along with the Curt Trunnion Style Weight Distribution System # 17301. The Curt Friction Sway Control for Weight Distribution Systems # 17200 will work and attach to the hitch ball on the weight distribution system. You will need either 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286. I've attached a link to a video review of the sway control unit for you to take a look at as well as a link to the instructions.
    view full answer...
  • Recommended Weight Distribution System For Lance 1575 Trailer With 600 Lbs Tongue Weight
    For your Lance 1575 Trailer, I recommend the Curt Weight Trunnion Style Weight Distribution System with Shank, part # 17301. This is a trunnion style system that can work with a trailer with up to 800 lbs tongue weight. This system comes with the shank that fits 2 inch receivers and has a maximum rise of 6 inches to the maximum drop of 2 inches. since the brackets slip over the top of the frame, you should have no problem attaching the brackets that the chains attach to. I have attached...
    view full answer...
  • Does Curt Weight Distribution Come with a Pole Tongue Adapter
    Weight distribution systems including # 17301 do not come with a pole tongue adapter but we do have them available separately. If you go with a chain hanging system like 17301 then you can use pole tongue adapter # RP3280. However the adapter is rated for 7,500 pounds gross trailer weight and 750 pounds tongue weight so you are limited to that. If you are talking about the shank that the head mounts to, yes, it is included. If you need more capacity you could go with adapter # RP58393...
    view full answer...
  • Comparing Curt # C17331 Short-Arm vs # 17301 Standard Length Spring Bar Weight Distribution Systems
    The only difference between the Curt # C17331 and the # 17301 weight distribution systems is the length of the spring bars. The Short-Arm system is designed for trailers that have batteries or propane tanks on the trailer tongue, where there is a limited amount of space on the frame member. Either system is designed for trailers whose total tongue weight (trailer tongue weight plus weight of cargo in truck bed or SUV cargo area behind rear axle) doesn't exceed 800 lbs. A better performing...
    view full answer...
  • Where Exactly on Trailer Frame Do Weight Distribution Lift Brackets Attach
    The installation instrucutions of many of the weight distribution systems will tell you how far back on the trailer frame the lift brackets would attach. For instance, with the Curt # 17301, the bracket would attach approximately 30 inches rearward of the trailer ball center line. The similar Reese # RP66541 would have the lift bracket at the same 30 inch mark. Rather than hunting around for a system with bars of a certain bar length, I'd recommend you simply use bolt on brackets...
    view full answer...
  • Measurements Needed To Determine Best Weight Distribution System For Towing
    For a correct measurement you need to measure the distance from the ground to the top of the receiver opening on your vehicle. You then need to measure the height from the ground to the bottom of your coupler on your trailer when the trailer is level and on level ground. You want to keep the system as level as possible and can use an adjustable shank to be able to tow your trailer level. If your trailer weighs more than 50 percent of the weight of your towing vehicle it is always...
    view full answer...
  • How to Attach Weight Distribution Chain Hangers to Trailer When Top of Frame is Inacessable
    In a situation where using the normal style chain hanging brackets isn't feasible because the top of the trailer frame isn't accessible, I'd recommend using a bolt-on hanger like part # RP58305. I wouldn't recommend using a chain hanger from a different company, because the parts haven't been tested together. Draw-Tite and Reese are sister companies under the same parent company, Cequent Performance Products, which is why using the Reese bolt on hanger would be okay.
    view full answer...
  • Is an 800 Pound Weight Distribution System too Heavy for a Trailer with 450 Pounds Tongue Weight
    The 800 pound Curt system # 17301 is a bit high for a trailer with 450 pounds tongue weight. But you can compensate by using more chain links and adjusting the head angle to get a little less tension on the system. Also keep in mind that when calculating tongue weight for weight distribution you take the tongue weight of the trailer, when loaded and ready to tow, and add to that the weight of anything loaded behind the rear axle of the tow vehicle. Of course you are still limited to...
    view full answer...
  • Can I Back Up with the Curt Weight Distribution System part # 17301
    The Curt Weight Distribution System part # 17301 that you referenced would allow you to back up in the situations you described. You will want to avoid tight jack-knife like situations though. In those situations you would want to remove the spring bars. Even more so that goes for the Friction Sway Control part # 83660 you are interested in using as well. If you are backing up basically straight you would be okay, but if it gets tight you would want to remove this unit as well until...
    view full answer...
  • Weight Distribution Recommendation for a 2004 Forest River 291 Surveyor
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Since the numbers you listed are...
    view full answer...
  • Curt Weight Distribution and Shank Recommendation for Setup that Requires 6 inches of Drop
    For a shank to use with the Curt Weight Distribution system part # 17301 that can do 6 inches of drop you would want the part # C17122. For a 2 inch ball you would want part # A-90 or for a 2-5/16 inch ball # 19286. For a friction sway control unit you would need the part # 17200. Our most popular set of wheel chocks is the part # AM3620.
    view full answer...
  • Weight Distribution Hitch Recommendation for an 18-Foot V-Nose Trailer With Limited Frame Access
    Thank you for providing the photo of your V-nose trailer's coupler and frame. Since you have limited frame access on this trailer in order to install a weight distribution/sway control system you will need one that uses lift brackets that bolt on to the side of the frame member rather than the kind that clamps around it. We offer # RP58305 from Reese. These will bolt to the sides of your trailer frame centered 31-inches from the hitch ball. Step one is to measure your trailer's fully-loaded...
    view full answer...
    Image 1 for
  • How to Pick Out a Weight Distribution System for a 1996 Mallard by Fleetwood
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well. Once you know your tongue weight we can make the best possible recommendation. But most likely it's pretty low and would between 350-500 lbs. So a system like the part # RP66082...
    view full answer...
  • Weight Distribution System for an Arctic Fox Travel Trailer and 2006 Dodge Ram 2500
    Weight distribution is a good idea if the trailer weighs at least 50 percent of the vehicle weight or if when hitched up the back of the tow vehicle sags. In your case weight distribution would be a good idea. When choosing a system you will want to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer when loaded and ready to tow and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. If the dry weight...
    view full answer...
  • Recommended Weight Distribution System For Rockwood Hybrid Camper With 600 Lbs Tongue Weight
    To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle. For your Rockwood Hybrid Camper with accessories on the trailer tongue, I recommend the trunnion style weight distribution system with sway control like the Blue Ox system # BXW0750. This system will bolt...
    view full answer...
  • Shank Recommendation for Curt Weight Distribution That Allows 5 inches of Drop
    For a shank that will allow you to do 5 inches of drop with the Curt Weight Distribution System part # 17301 that you referenced you would want the # 17120 which can do a drop of up to 5-5/5 inches. That would be all that you would need.
    view full answer...
  • How to Pick Out a Weight Distribution System for a Toyota FJ Cruiser
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Once you know your tongue weight...
    view full answer...
  • Will The Curt Trunnion Style Weight Distribution System # 17301 Help When Towing A 30 Foot Camper
    The Curt Trunnion Style Weight Distribution System, 800 TW, 8,000 GTW, part # 17301, is capable of tongue weights up to 800 lbs and a gross towing weight capacity of 8,000 lbs. To choose the correct weight distribution system for your trailer you will need to determine the tongue weight of your 30 foot camper. The tongue weight is calculated as 10 to 15 per cent of the overall trailer weight. Then, add any weight that is behind the rear axle of the tow vehicle to your tongue weight...
    view full answer...
  • Which Curt Weight Distribution System to Use with 2020 R-Pod 190
    I looked up your 2020 R-Pod 190 and it would have a lower tongue weight than what the rating of the Curt # 17301 has so this would not be an ideal system for you. It would give you a pretty harsh ride quality. For a similar Curt with the appropriate tongue weight range the part # 17300 would be what you'd need. Friction sway control is not required but if you wanted to add that you could easily with the part # 17200 which the # 17300 has a tab on the head for an easy install as well....
    view full answer...
  • Shank to Use with Curt Weight Distribution System with 4 Inches of Drop to Fit a 2-1/2 Inch Receiver
    For a 2-1/2 inch shank that has at least 4 inches of drop to go with the Curt # 17301 you can use the Equal-I-zer # EQ90-02-4800. Most weight distribution systems fit other brands without an issue and the Equal-I-zer will work just fine with the Curt. You'll also need a hitch ball with the Curt system. Use # 19286 if your trailer's coupler fits a 2-5/16 inch ball or # A-90 for a 2 inch ball.
    view full answer...
  • Are Air Springs or Weight Distribution Better for Towing 31-foot Travel Trailer with 2011 Tundra
    Rear axle suspension kits such as air bag or rubber jounce helper springs are best suited for applications with heavy (and/or uneven) cargo loads in the truck bed, while a weight distribution/sway control system will be a better option for towing a bumper-pull travel trailer. A properly chosen weight distribution setup, such as the Curt trunnion bar system # 17301 that you referenced, will help correct for rear-end squat by moving some of the trailer's tongue weight forward onto the Tundra's...
    view full answer...
  • Can 2009 Dodge Durango Tow 4400 lb Artic Fox Trailer
    I did some research, checking the owners manual and online, and was unable to find specific mention of the towing capacity of the 2009 Durango with the 4.7L engine. I saw mention of a tow rating well above 6000 lbs, but there was not a good description of how the vehicle needed to be equipped to achieve this rating. The good news is that you can easily determine the tow rating of your Durango by checking the sticker in the drivers side door jamb. You should see a listing for the GCWR,...
    view full answer...
  • Weight Distribution Recommendations for 2012 Ford Expedition EL 4x4
    As a general rule of thumb, any time the loaded weight of the trailer is 50 percent or more of the loaded vehicle, weight distribution is recommended. Since the trailer, at 4100 lbs is more than half the approximate 5800 lb weight of the Expedition, I'd highly recommend a w/d system. The first thing you'll want to do is check the sticker on the hitch for the capacity when using weight distribution. It's likely higher than the 600 lb non-WDH capacity you mentioned, but you'll want...
    view full answer...
  • Weight Distribution System Recommendation for 2003 Chevy Blazer
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use. Once you know your tongue weight...
    view full answer...
  • Weight Distribution Hitch Recommendation for 6000 lb GTW 900 lb Tongue Weight Boat Trailer
    That's a lot of tongue weight for a boat trailer! If your trailer has a surge (A/K/A Hydraulic) brake coupler, you won't want to use a chain suspended weight distribution system like the Curt # 17301 you've looked at. The tension on the chains caused by the spring bars will prevent the surge coupler from properly actuating, curtailing your braking effectiveness. With 900 lbs of tongue weight capacity, the # 17301 you'd looked at wouldn't work well because it has an 800 lb tongue weight...
    view full answer...
  • Installation Instructions for Curt 8000 lb Weight Distribution Hitch
    We carry a few different weight distribution systems rated for 8,000 lbs manufactured by Curt: -Curt Trunnion Style Weight Distribution System with Shank, part # 17301 -Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion, part # C17499 -Curt MV Weight Distribution System - Round Bar, part # # C17051 -Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar part # C17331 -Curt Weight Distribution System with Shank - Pin-Style Trunnion Bar part # C17341 I've...
    view full answer...
  • What is the Difference between Curt Weight Distribution Systems # 17301 and # C17341
    The difference between Curt Trunnion Style Weight Distribution System with Shank, 1,000 lbs. TW, 10,000 lbs. GTW Item # 17301 and # C17341 is the style of the trunnion bars. Kit # C17341 has bars that pin into the trunnion couplings whereas with # 17301 the bars are bolted to the trunnion couplings. They offer the same performance and specs but it is easier to remove the pin-in bars so if you will put on and remove the spring bars frequently the pin-in style is your best option. For...
    view full answer...
  • Curt Weight Distribution System Recommendation for 600 lb Tongue Weight
    The tongue weight range of the Curt weight distribution system part # C17500 that you referenced is 800 to 1,000 lbs. If yours tongue weight is 500-600 lbs and you used this system you'd have a pretty rough ride quality. There aren't lighter rated bars for your setup so we don't have a solution aside from just replacing the entire system. The part # 17301 would be a great solution with a better range as it is for up to 800 lbs of tongue weight.
    view full answer...
  • Capacity of Curt C17307 Replacement Weight Distribution Hitch Head
    The Curt # C17307 weight distribution head is good for up to 10,000 gross trailer weight/1000 lbs tongue weight. The head is compatible with Curt trunnion style weight distribution systems like # 17300, # 17301, # 17302, # C17330, # C17331 or # C17332.
    view full answer...
  • Weight Distribution System Recommendation for a North Trail 22FBS
    The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow like you mentioned. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle, but it does not include factory equipment like the spare tire. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of...
    view full answer...

Do you have a question about this Weight Distribution Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality weight distribution hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate weight distribution hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Updated by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Chelsea B
Updated by:
Chelsea B
Employee Sarah W
Updated by:
Sarah W
Employee Amanda M
Updated by:
Amanda M
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Kathleen M
Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.