1. Watersport Carriers
  2. Malone
  3. Surfboard
  4. Roof Mount Carrier
  5. Crossbar Pads
  6. Aero Bars
  7. Factory Bars
  8. Round Bars
  9. Square Bars
  10. Elliptical Bars
Malone Rack Pads for Crossbars - Surfboard - 18" Long - Qty 2

Malone Rack Pads for Crossbars - Surfboard - 18" Long - Qty 2

Item # MPG313
lowest price pledge
Retail:$34.95
Our Price: $17.95
You Save: 49%
Watersport Carriers
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.56 lbs
Quantity: 
In Stock
Malone Aero Bars,Factory Bars,Round Bars,Square Bars,Elliptical Bars Watersport Carriers - MPG313
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

These soft foam pads makes it easy to safely transport a surfboard on your roof rack crossbars. Pads wrap firmly around crossbars and secure with hook and loop fasteners. Lowest Prices for the best watersport carriers from Malone. Malone Rack Pads for Crossbars - Surfboard - 18" Long - Qty 2 part number MPG313 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (1)
  • Videos (2)
  • Photos
  • Why etrailer?

Malone Watersport Carriers - MPG313

  • Surfboard
  • Roof Mount Carrier
  • Malone
  • Crossbar Pads
  • Aero Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Elliptical Bars
  • No Load Assist
  • Hook-and-Loop Mount
  • Rear Loading
  • Non-Locking

These soft foam pads makes it easy to safely transport a surfboard on your roof rack crossbars. Pads wrap firmly around crossbars and secure with hook and loop fasteners.


Features:

  • Foam pads make it easy to safely transport 1 surfboard on your roof rack crossbars
    • Also great for ladders, lumber, and other similarly sized gear
  • 2 Pads wrap around crossbars and secure with hook and loop fasteners
    • Polyester weave covers are UV-resistant
  • Available load straps and tie-downs (sold separately) secure gear to your roof rack


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
  • Dimensions: 18" long x 4" wide x 2" tall
  • Weight: 1 lbs
  • 1-Year warranty


  • Malone 18" standard crossbar pads
  • Simple, safe, and effective way to transport surfboards on rooftop crossbars
  • Velcro and shock cord fastening system
  • Fade resistant polyester construction
  • Fits round, square, and smaller oval, aero, and elliptical crossbars
  • Overall dimensions (each): 18" long x 4" wide x 2" tall
  • Product weight: 1 lb
  • Quantity: 2 pads
  • 1-Year warranty


MPG313 Malone 18" Rack Pads for Surfboard - Qty 2




California residents: click here


Video of Malone Rack Pads for Crossbars - Surfboard - 18" Long - Qty 2

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Malone Crossbar Rack Pads Review

Randy: Hey, guys. Randy here at etrailer.com. Today, we're going to be taking a look at a couple of the Malone rack pads. These are essentially going to be nice thick pads. These are 18 inches wide, so perfectly suited for surf boards, that are going to wrap around your crossbars and you can see they give us a lot of padding here. Rather than just putting our surf board directly on top of our crossbars or putting lumber or a paddleboard up there, we can offer some protection for the item that we're carrying, but also for our cross bars.

A lot of times when you put items up there and push them back and forth, you'll cause scratchings and things like that to our cross bars. It's just not something that you really want.Now, the material itself feels really nice and durable. The pad is nice and thick. I don't think it's something that's really going to wear out very quickly. We're going to have a couple of connection points on each end.

Just use some elastic there and a keeper on the middle. In the middle here, we're going to have some hook and loop. That'll install really easily, which you'll see when we take care of that later. The only thing we really recommend getting are some straps to get everything held down.The best thing we we're able to find we're just kayak carrier straps. Basically, they're going to have some type of protection on them to keep you from damaging if you're going to be using this with like a surfboard or a paddleboard.

If you're hauling lumber, you don't care what you strap it down with. But for these, I think the etrailer straps that we're using today, they do a great job neoprene projector around the buckle, just to try to save that finish on your board, so that really be all you'd need to add. Of course, you'll need a roof rack system, but you already know that if you're looking at these. But it can provide a really nice easy way for us to get our board where we want it.Another option, very similar to this, is going to be from INNO, it's what we have here. As far as getting the job done.

I think both of them are going to do a good job. You see this one uses this hook and loop on each end, so we could sense that down a little tighter, but I don't have any problem with the way this attaches the coding or these. The covering here I think is a little bit higher quality. It has a little bit of a rubberized texture to it. But strapped down properly, things aren't really going to move. The thing I don't like about this one that I do like about the Malone, just that the padding isn't nearly as thick. I don't think it's going to give you quite as much protection as what you're going to get from the Malone. While this is a very good option, if I had to pick between the two, I think the Malone would be the one I'd go for.Another thing I like about the pad style like this is that really they can fit on any type of cross bar, whether it's the elliptical or arrow like we have here, round, square, and even most factory roof rack systems, you're not going to have any problems with getting that around it.The beginner installation, of course, we'll want to grab our pad here. You'll need your crossbars already installed if they're not already. See, we've got a couple of keepers. One's going to be and loop there in the middle, and on each end we're going to have the elastic strap with the little push fastener. I'm going to take that off and we're going to spread this out to where it rest around our bar. This is a brand new set so I figured it would be a little bit snug for now, but I imagine once these are around your bar for a little while, they're going to conform. Like we said, they're made to fit just about any type of crossbar.Pull that hook and loop tight. I like to do that one first, that allows me to kind of position a little bit here. Bring these down, line them up. We'll put on our keeper. Slide that up and underneath and we just do the same thing on the other side there. All right. Just slide them, get it lined up with the one in the back, which we've already got on. Now once we have our pads in place, of course we're going to lay our board up on top, then we'll grab our straps and get it strapped down.So overall, I like these. If I we're a surfing guy and I needed to get my board out there, rather than shoving it inside of the car and getting dirt and stuff like that, sand inside, I like putting them on the outside. I think this is a really nice cost effective way to do it. Overall, I'm impressed with them. Definitely like them better than the INNO for their thickness factor in their protection factor. I would definitely go with these. I think you'd be happy to have them and it'll get the job done for you, for sure.


Customer Reviews

Malone Rack Pads for Crossbars - Surfboard - 18" Long - Qty 2 - MPG313

Average Customer Rating:  4.3 out of 5 stars   (3 Customer Reviews)

These soft foam pads makes it easy to safely transport a surfboard on your roof rack crossbars. Pads wrap firmly around crossbars and secure with hook and loop fasteners.

- MPG313
by:

We used this to cover the worn cushion on our kayak rack. Works great and is removable so that we can take it in from the winter weather! 773591



- MPG313
by:

Works great on my Rola racks for my kay aks 674611


Comments
Great! Good product! Durable
Becky - 07/27/2020

95388

- MPG313
by:

I received the cross bar supports and am pleased with my purchase. Although I'm sure they will make the surfboard rental company happy, my primary reason for purchasing was to protect the crossbars on my new SUV. I use the crossbars on past vehicles for loading anything too large to fit inside (lumber, party tents, etc.) and found the crossbars got really scratched up and look bad, and were also quite slippery and allowed what ever it was to shift on turns. These pads should prevent that, oh and will protect what ever I'm carrying from damage from the bars as well. Would have given them 5 starts but have not had them long enough to test fully and understand how they will hold up to sun and rain. 401687


3
3

Ask the Experts about this Malone Watersport Carriers

  • Best Value Roof Rack and Surfboard Carrier for 2020 Toyota 4Runner with Factory Raised Rails
    The best option for a cost effective roof rack for your 2020 Toyota 4Runner is the Malone AirFlow2 Roof Rack # MPG215. This complete roof rack comes with the two aluminum aero crossbars, four towers, installation tool and it even comes with locks and keys as well. I actually had the chance to install this roof rack and it only took me about 15 to 20 minutes to unbox, slide the towers on the bars, position them on the rails and tighten them down. You can't beat the value and functionality...
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality watersport carriers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate watersport carrier information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Randy B
Edited by:
Daron K
Video by:
Zach D
Written by:
Jonathan S
Updated by:
Jessie B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.