Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards

Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards

Item # INA446

lowest price pledge

Retail:$239.99

Our Price: $215.99

You Save: $24.00
Watersport Carriers

This item qualifies for Free Shipping

Shipping Weight: 13 lbs

Quantity: 
In Stock, Ships Today
Inno Watersport Carriers - INA446
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Surfboard
  • Paddle Board
  • Canoe
  • Kayak
  • Roof Mount Carrier
  • Inno
  • Saddle-Style
  • Aero Bars
  • Factory Bars
  • Round Bars
  • Square Bars
  • Elliptical Bars
  • Rear Loading
  • Side Loading
  • Clamp On - Standard
  • No Load Assist
  • Locks Included
Acura RDX watersport carriers from Inno. Product reviews from other RDX owners. Expert watersport carriers advice with thousands of helpful questions and answers. Guaranteed lowest price and fastest shipping.


  • All Info
  • Reviews (2)
  • Q & A (25)
  • Videos (2)
  • Photos
  • Why etrailer?

Inno Watersport Carriers - INA446

This locking carrier lets you transport 1 kayak or canoe or 2 SUPs on your roof rack. Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Crossbar pads included. Easy, clamp-on installation.


Features:

  • Carrier lets you transport 1 canoe or kayak or 2 stand-up paddleboards on your roof
    • Can also be used for 3 short surfboards, 2 windsurf boards, or 2 long surfboards
  • Easy to load with integrated straps
    • Set boat on crossbars
    • Wrap long straps over the boat and connect them with hooks to wire looms on short straps
    • Tighten straps down with built-in ratcheting knobs
  • High-density foam pads help to protect cargo during transport
    • Wrap around crossbars and fasten with Velcro closures
  • Adjustable pads and rubber coating on straps protect boats from scratches and scuffs
  • Locking covers secure boat to carrier and carrier to crossbars
  • Easy, clamp-on installation with included hardware
  • Constructed of durable metal and rubber


Specs:

  • Application: round, square, aero, elliptical, and most factory crossbars
    • Maximum crossbar dimensions: 3-1/2" wide x 1-1/8" tall
    • Long bolt kit (INISF722 - sold separately) lets you mount rack on crossbars up to 2" tall
  • Minimum crossbar spread: 24"
  • Carrying capacity: 1 canoe or kayak; 2 stand-up paddleboards; 3 shortboards; 2 windsurf boards; or 2 longboards
  • Board pad width: 20"
  • Carrier weight: 13 lbs
  • Limited lifetime warranty


Inno Surf/SUP/Kayak/Canoe Locker dimensions

Inno Board Locker release straps

This locking carrier lets you safely and securely transport 1 kayak or canoe, 2 stand-up paddleboards, or 2-3 surfboards on your vehicle's roof rack. The carrier is easy to load and use with integrated straps and ratcheting hand knobs. Adjustable pads protect your boat or boards during transport, and board pads provide a cushion between the boat and your crossbars. The carrier also installs easily with clamp-on hardware to most crossbars.


Easy-to-Load System

Inno Board Locker release straps

The carrier is easy to use and easy to load. There are 2 long straps that stretch over your cargo and secure to 2 short straps. The straps are tightened in place with ratcheting knobs. When transporting a kayak or canoe, load the boat onto your crossbars first. Then connect the straps over the boat - securing the wire looms on the ends of the short straps to the hooks on the ends of the long straps - and tighten them with the hand knobs.


Inno Board Locker load

When transporting surfboards or SUPs, connect the straps first. Slide your board onto your crossbars under the connected straps, then tighten down the straps with the ratcheting knobs.


Inno Board Locker release

When it's time to remove your cargo, lift the tension release levers under the covers to loosen the straps and unhook them.


Protective Padding

Inno Board Locker padding

Rubber coating on the straps and adjustable corner pads help to protect your boat and boards from scratches and scuffs during transport. Board pads are also included to provide a cushion for your boat. Just wrap the pads around your crossbars and secure them with Velcro straps.


Simple Installation

Inno Board Locker on roof

The carrier is simple to install and requires no tools. It clamps easily with included hardware to most crossbars. To install, flip the cam lever on the mounting clamp to loosen the bolt and release it from the lower mounting bracket. Slide the bracket under the crossbar and reattach the bolt to the bracket. Tighten the knob and close the lever.


Inno Board Locker adapters

Adapters are included for mounting the carrier on different crossbar styles. Adapter blocks let you mount the carrier to round or square crossbars. Rubber pads are also included for use when mounting the carrier to aero, elliptical, or factory crossbars.


Locking Covers

Inno Surf/SUP/Kayak/Canoe Locker on lock

Four locking covers secure your boat or boards to the carrier and the carrier to your crossbars. With the covers locked and closed the ratcheting knobs cannot be turned and the tension-release levers cannot be accessed to loosen the straps. The locked covers also deny access to the mounting hardware so the carrier cannot be removed from your crossbars.



INA446 Inno Carrier for Canoes, Kayaks, SUPs, and Surfboards w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards



INA446 Installation InstructionsInstallation Details INA446 Installation instructions

Video of Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Inno Watersports Carrier Review

Today we're going to be reviewing the Inno Surfboard, Stand Up Paddle Board, Kayak or Canoe Carrier, part number INA446. This locking carrier holds one kayak, 1 canoe, 2 wind boards, 3 short boards, 2 long boards or 2 stand up paddle boards. The universal mounting system fits round bars, square bars and most factory crossbar systems. The stainless steel rubber coated ratcheting cables hold your water craft in place and tighten using the ratcheting knobs. When tension is released the crane cover holds your strap in arch position to make loading your gear easier. The adjustable pads help with additional security and protection. In the lock position, the locking cover prevents the ratcheting of your straps, release of the tension lever and access to the cam lever. The carrier includes the board pads, the locks and the keys. Now that you're gone the interesting features, we'll show you how to get it installed.

Now, on our table we have everything that comes with our kit except for the instructions. Now first, we'll start with this ratcheting mechanism flipping it over and we'll take our adapters. Today we're using our square bars, we also have the adapters for those round bars as well. I just going to take that adapter and fit it right in to the center. It just slips right in and stays in place. Now, we can take that main ratcheting mechanism again and put it on to our vehicle.

Since we already have the front in place, you want to line them up so they're even. Open up our cam lever and then start to tighten down this bolt in front. Now with that tightened down, we'll check our cam lever to see if the whole unit is tight. Since we still have a little bit of wiggle there we're going to come to the back and tighten up this bolt as well. With that tightened, we'll then check the cam lever again, there's less movement there so we're good to close down and load up the other half of our carrier. Now that we got that in place, we can take our main crane unit and we're going to install it on the other side.

First thing we'll do before that is place on our adapter again. Now, we can head over and place it on crossbar. We'll take our unit and place it on to our crossbar, again, lining it up with our front. We'll take our bracket around and secure it to our bolt. We're going to open our cover back and then loosen that cam lever as well.

We'll then start tightening down that bolt again to secure it around the bracket. Now we're ready for our final step of loading up our crossbar pad. Now, with our carrier sides both open, we'll step up into our car and place down our pad. Again we wanted to line up evenly with the front and then we can secure it down. Our hook and loop straps are just going to reach around the bottom of the pad and connect to itself on top. Now we're ready to load up our gear. We've loaded it in 2 different styles. Here at the front is what we would suggest if you have larger items such as stand up paddle boards or kayaks or canoes. What we did is we connected our cables beforehand so it's looped around the other side and then it stays elevated so you can slip any of your gear just underneath that cable and strap. Here at the back is our different loading style, here we have to take our cable and connect it to our strap, to do so we'll pull down on our gray lever here and then we'll pull our strap through. This is going to be easier to load your smaller boards and make that connection with the cable there. Now with our cable and our strap connected, we can ratchet it down. Now, we can do the same to the front and that's going to complete our look at the Inno Surfboard, Stand Up Paddle board, Kayak or Canoe Carrier, part number INA446.


Customer Reviews

Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards - INA446

Average Customer Rating:  4.5 out of 5 stars   (2 Customer Reviews)

This locking carrier lets you transport 1 kayak or canoe or 2 SUPs on your roof rack. Ratcheting straps connect over boat or boards and tighten with integrated hand knobs to secure gear. Crossbar pads included. Easy, clamp-on installation.

- INA446
by:

This carrier is super simple to use and really secure. The crane support that holds the cables up make it easy to slide the paddle boards into position underneath them. You'll want to make sure you don't over-tighten the padded cables as they can get really tight, but you'll definitely have peace of mind that the boards aren't going anywhere. And the built-in locks are really nice when making pit stops on those longer trips. 599401



- INA446
by:

Easy set up. Feels secure. Pads don't fit our factory cross bars very well. 663260


2
2

Ask the Experts about this Inno Watersport Carriers
Do you have a question about this Watersport Carrier?


  • Can Inno Locker Watersport Carrier # INA446 Fit Rhino Rack Roof Rack RS 2500
  • If you use the long bolt kit part # INISF722 with the Inno Locker Watersport Carrier # INA446 it will fit the Rhino Rack Crossbars part # RRRS692B that you mentioned. The bars are 1/16 of an inch too tall to fit without the adapter.
    view full answer...

  • Recommended Roof Rack for Bikes and Surfboards on a 2019 Mini Cooper 2 door
  • The only roof rack option for the 2019 Mini Cooper 2 door is Yakima part # Y00408 for the crossbars, part # Y00124 for the feet and 2 sets of clips part # Y00728. I recommend adding a fairing to the setup. Yakima fairing part # Y05018 for round bars. The fairing deflects wind around the roof rack to prevent wind noise. The Yakima HighRoad roof bike rack part # Y02114 allows you to carry 1 bike on the roof of the Mini Cooper. The carrier is a no frame contact carrier so it will not damage...
    view full answer...

  • Saddles with Locks for a 95 Pound Kayak on a 2016 GMC Acadia
  • Your best bet is actually the saddle mounts. Unfortunately, there's no good J-Style racks that are locking and will have the weight capacity for your kayak. Saddle mounts directly transfer the weight to the bars, so they are a lot easier for fitting heavier kayaks. I have two saddle-style recommendations for you that include locking features and can support the weight of your kayak. The first is the Inno Locker, part # INA446. This is a strap-down carrier that will carry the kayak...
    view full answer...

  • Difference Between Inno Surfboard/Kayak Carriers INA744 vs INA446
  • The two Inno racks you referenced are pretty similar but the difference is that the part # INA446 is geared more for carrying a kayak or 2 boards whereas the # INA744 is geared more for carrying boards. It can carry up to 3 short boards or 2 long boards. Basically the kayak geared rack has higher brackets that lock down for securing a tall kayak and the board orientated carrier has lower brackets for the straps.
    view full answer...

  • Roof Rack Carrier Recommendation that Can Carry a Kayak and Paddleboards
  • The INNO Locker Carrier part # INA446 is a great choice for what you are looking for as it could either carry a kayak or two paddleboards. It can also fit the common roof rack crossbar styles like round, square, and aero.
    view full answer...

  • Roof Rack Bar Compatibility with Inno Locker Watersport Carrier INA446
  • Yes, the Inno Locker Watersport Carrier # INA446 will fit fine on your Thule AeroBlade roof rack and in fact this versatile locking carrier fits all shapes of roof rack bars. It also handles not only two SUPs, but also surfboards, canoes, and kayaks. The linked diagram illustrates the Inno carrier's rack fit capabilities.
    view full answer...

  • Recommended Roof Rack and Surfboard Carrier for 2017 Toyota 4Runner With OEM Roof Rack
  • The OEM roof rack on your 2017 Toyota 4Runner is adjusted by sliding them along the rails and locking them into place with thumb screws. You should be able to easily move them out of the way or remove them if you would rather use a Thule roof rack system. You will not need to take it to the dealer. The best Thule roof rack option for your 4Runner would include the WingBar Evo Bars, part # TH711400 for Silver or part # TH711420 for Black, and the Foot Pack # TH710401. You can add locks...
    view full answer...

  • Is Inno Locker Watersport Carrier # INA446 Mostly Black
  • Yes, I checked your order notes and the Inno Locker Watersport Carrier w/ Crossbar Pads # INA446 that you referenced is basically all black aside from the white and red of the brand name that's printed on it. I attached a review video for this rack for you to check out as well.
    view full answer...

  • Inno Kayak Carrier Compatibility With TracRac System
  • The Inno Kayak Carriers # INA446 and the # INA445 are not a fit for TracRac crossbars but the # INXA445 likely would work with the channels of the crossbars that are 4 inches wide and 1-1/2 inches tall but have a similar channel to most aftermarket crossbars.
    view full answer...

  • Can the Thule Hullavator Pro be Used to Carry a Canoe
  • The Thule Hullavator Pro # TH898 is actually only meant to carry kayaks. If you are looking for a canoe carrier from Thule then the only option is the Portage Canoe Carrier w/ Tie-Downs # TH819. This carrier clamps around your crossbars but if you have T-Slots you can use the Adapter # THXADAPT12 which can provide some security if you have locking crossbars. We do carry some other alternative options like the Inno Locker # INA446 and the Lockrack Adjustable Watersport Carrier # 339-LRUNISETX...
    view full answer...

  • How to Carry a Kite Surfboard on a Roof rack
  • Boards like your kitesurf board are too thick for ski carriers but we do have surf board and paddleboard carriers that would work. We have the follow: Thule SUP Shuttle # TH811XT Yakima SupPup # Y04078 Yakima SUPDawg # Y04075 Inno carrier # INA446 Inno Boardlocker # INA744 I have linked video reviews of a couple of these carriers for you.
    view full answer...

  • Recommendation on a Roof Rack and a Trailer Hitch for a 2017 Toyota RAV4
  • I have a solution to your questions. For a roof rack, I recommend the Inno Aero Crossbars, # INXB100-108 in black, and the Inno Flush Feet, # INXS100. This rack is a confirmed fit on your 2017 Toyota RAV4 with factory installed side rails. The Aero Crossbars will provide a sleek low profile look on your RAV4's roof while having an aerodynamic design that will reduce wind noise when in transit. For a kayak carrier, I like the Inno Kayak Carrier, # INA446. This carrier will mount...
    view full answer...

  • Recommendations to Carry 3 Bikes, 3 Surfboards or 3 Kayaks on 2005 Toyota Prius
  • Let's start with a solution for your mountain bikes. To transport your 3 mountain bikes with your 2005 Toyota Prius, you have a couple of options. If you would rather go with a hitch-mounted bike rack, I recommend first installing the Draw-Tite Class I Sport Frame Receiver Hitch # 24808. This is a Class I trailer hitch that will provide a 1-1/4 inch receiver opening and a 200 pound tongue weight capacity. Then for a bike rack, I recommend looking at the Swagman XTC-2 -Bike Platform...
    view full answer...

  • Carrying a Rooftop Tent and Surfboard on a 2014 Subaru Outback Wagon
  • This setup will largely depend on how wide you want to go with the bars. I'll be using the Yakima SkyRise Small Rooftop Tent, part # Y07407 as our rooftop tent in this setup so you can get an idea of how this works together. When mounting a rooftop tent, it's best to stay in the same brand family as the tent, as the companies tend to design their tents around their rooftop system. Yakima designed theirs around fixed point or factory rails that run front to back for their best fit....
    view full answer...

  • Canoe Carrier Recommendation for a 44 inch Wide Canoe on a 2001 Chevy Suburban
  • I spoke with my contact at INNO and they said that due to the shorter crossbars on your 2001 Chevy Suburban the part # INA446 would not be able to open wide enough for a canoe that measures 44 inches at the widest beam. The best solution we are going to have would be the Thule Goal Post # TH997 that installs in the hitch of the Suburban and then gives you a wide crossbar to mount the rear of the canoe on. I attached a review video for this rack as well. Since you would be loading the...
    view full answer...

  • Roof Racks for 2004 Honda Civic 2-Door Coupe for Transporting Surf Boards
  • We can help you with a roof rack and surf board carriers for your 2004 Honda Civic 2-door coupe. Roof rack options for your Civic come from Yakima and SeaSucker and are displayed on the page I linked for you. Yakima offers both standard round bar racks and also their quieter Jetstream rack systems. The round bar rack is the lowest-cost setup and is made of parts # Y00408, # Y00146, # Y03536, # Y06162 and # Y06159. But for only a few more dollars you can get the black Jetstream rack,...
    view full answer...

  • Locking Surfboard Carrier Recommendation for 2017 Ford Explorer
  • The Thule SUP Shuttle Stand-Up Paddleboard Carrier with Tie-Downs # TH811XT that you referenced isn't lockable but we do have the Inno Locker part # INA446 which is a locking surf board carrier that will work great on the factory crossbars of your 2017 Ford Explorer. This comes with locks and can fit 3 short surfboards, 2 windsurf boards, or 2 long surfboards. I attached a review video for this rack for more info as well.
    view full answer...

  • Roof Rack Recommendation for 2018 GMC Acadia for Carrying Inno Kayak Carrier
  • For your 2018 GMC Acadia that has factory raised rails that run front to back on the roof we have the Rhino Rack roof rack part numbers # RRVA118B-2 and # RRSX100 as a confirmed fit that would work great with the Inno Locker kayak carrier part # INA446 that you referenced. The rack has more than enough weight capacity for your 85 lb kayak as it has a 165 lb weight capacity. I really like the Rhino Rack roof racks as you end up getting a roof rack that is on par with the more expensive...
    view full answer...

  • Recommended Roof Rack for 2000 VW Beetle for Carrying Surfboards
  • Without knowing the specifics about how the Yakima rack didn't fit well, it would be hard to compare the fit of the Inno rack to what you had. The Inno rack uses clamps that grab the upper door jamb of the vehicle, which is a reliable attachment method. To provide a rack for your Beetle, you'd need the following items: Square crossbars, part # INB127 Roof Rack Feet, # INSUT Short Roof Adapter Kit # INJK Custom Fit Kit # INK775 To carry your boards, you could use Inno's Locker...
    view full answer...

  • Using Yakima DryDock and Single Bar Roof Rack on 2003 Toyota Tundra Access Cab for SUP and Kayak
  • There are no single bar roof racks that will fit your 2003 Toyota Tundra Access Cab so what I recommend is the Darby Extend-A-Truck Kayak Carrier w/ Hitch Mounted Load Extender and Single-Bar Roof Rack # DTA944-968-924. For a carrier that can be used for a kayak or a stand up paddleboard you can use Inno carrier # INA446 or # INA445.
    view full answer...

  • Canoe Carrier Recommendation for Use on Yakima Rack and Roll Trailer
  • Due to the small size of the Yakima Rack and Roll trailers like the part # Y08107 you really can't tie the bow and stern to anything and have it be very effective. Most people just secure the kayaks/canoes with the straps that run around the outside of the boat and that works just fine. For a canoe carrier that would allow you to transport it on the Yakima Rack and Roll Trailer part # Y08107 that you referenced you would want the Inno Locker Watersport Carrier # INA446.
    view full answer...

  • Rhino-Rack Roof Rack Compatibility with 2 Stand Up Paddleboards on 2016 Honda Fit
  • On your 2016 Honda Fit, the Rhino-Rack roof rack consisting of # RRVA118B-2, # RRRLKVA, and Fit Kit # DK438 are a confirmed fit. This rack is rated for 165 lbs and has a 29.5 inch crossbar spread. This rack will allow you to carry two paddle boards when you use an appropriate carrier. I recommend the Inno Locker Watersport Carrier w/ Crossbar Pads - Locking - Clamp On - 1 Boat or 2 Boards # INA446. This carrier has a locking design to secure your paddle boards once they are mounted...
    view full answer...

  • SUP or Surf Board Carriers for Factory Roof Rack on a 2013 Toyota Highlander
  • Inno Surfboard, SUP, Kayak, or Canoe Carrier # INA446 comes with the board pads that wrap around the crossbars. The other one, # INA445, does not come with board pads. I checked with Inno and they do not list either carrier as a fit for the factory roof rack on your 2013 Toyota Highlander. the Thule SUP Shuttle, # TH811XT, will fit the factory roof rack on your 2013 Toyota Highlander.
    view full answer...

  • Paddleboard Carrier Recommendation for 3 Boards for a 2005 Chevy Silverado
  • For a 3 board paddle board carrier the Inno Paddle Board Carrier part # INA446 would work well. You will need a roof rack to carry this carrier though. For that the Rhino Rack square bar setup that consists of part numbers # RREB137B, # RRRLKVA, # RREB-FK1 and # DK227 would be a great option that has been confirmed as a fit.
    view full answer...

  • Will the SeaSucker Board Carrier 298-BX1806 Work for a Prone Paddleboard?
  • The SeaSucker Board Carrier - Vacuum Cup Mounted - 1 Surfboard or Paddleboard # 298-BX1806 will fit paddleboards up to 31 inches wide. If your paddleboard fits that criteria then you will simply need to use the included straps to secure the board for transport. If your paddle board is wider than 31 inches then I recommend the Rola Rail Extreme DFE Series Roof Rack - Naked Roofs - 47" Long # R5020 and then the lock cores # 59315. Then you I recommend the Inno Locker Watersport Carrier...
    view full answer...


Do you have a question about this Watersport Carrier?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality watersport carriers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate watersport carrier information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Written by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Jacob T
Expert Research:
Adam R
Video Edited:
Dustin K
Installed by:
Hayden R
Updated by:
Ronnie R
Installed by:
Savanna B
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.