1. Custom Fit Vehicle Wiring
  2. Subaru
  3. 2011
  4. Tekonsha
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118467
lowest price pledge
Retail:$57.28
Our Price: $40.46
You Save: 29%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 0.74 lbs
Quantity: 
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Powered Converter 118467
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Call etrailer.com at 800-298-1624 for expert service. We are your Subaru custom fit vehicle wiring experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Tekonsha products for your Subaru 2011. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118467 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.
  • All Info
  • Reviews (34077)
  • Q & A (598)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118467

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Tekonsha
  • Powered Converter

Quickly and easily install a 4-way trailer connector on your Subaru Forester with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting, splicing or tapping
    • Locate connection point in rear cargo area
    • Plug in connector
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
  • Protective connection terminals resist corrosion
  • Comes with dust cap for 4-way flat connector
  • 10-Amp mini fuse included


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 5.6 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, either behind the driver's-side trim panel or in the spare tire compartment. You will need to remove some interior paneling to access this harness. Once you've plugged in the connector, insert the provided fuse into the in-line fuse holder.


Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area.


It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


T-One Installation on Subaru Forester and Outback Wagon with OEM Backup Sensors


118467 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118467 Installation instructions

California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118467

Average Customer Rating:  4.8 out of 5 stars   (34048 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your Subaru Forester with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

- 118467
by:
2019 Subaru Outback Wagon

I received the Draw-Tite Max-Frame trailer hitch receiver class lll 2" custom fit for our Subaru 2019 Outback on the 12th of March, 5 days after ordering it, almost to the minute. It is in pristeen condition. It will be some time before I can get it installed because of the covid19 but I will review it in detail when I can. So far this has been an excellent company to work with.


Comments
The wiring was easy to install except for the one spot in the Outback that is a little difficult to get the wires through. Other than that the wires are just the right length and well made.
Bob A - 03/14/2021


- 118467
by:

Installed on 2018 Subaru Outback. Very simple plug and play connector. Bought the affordable tester and made sure it worked...it did! The video was very helpful, but I’ll add one helpful tip. The video shows you having to reach up from the bottom of the upholstery to reach the connector and cut the blue tape holding it in place. Don’t waste that time and pain (the space is small); cut the bottom blue tape near the loop by accessing it as the video shows, but unbolt the net loop (see photos) with a 10mm socket to access the top blue tape from that hole. Once the top tape is cut you can easily pull down the wire from the bottom.



- 118467
by:

EZ 3-beer driveway installation even with some MacGyver tools (I had to use a cutoff piece of EMT conduit as a pry bar). I didn’t need ramps too, but a buddy to lift the mount into place is a good call. The shipping box made for a great work pad.



- 118467
by:

The instructional video was great in locating the Subaru's wiring harness plug without having to tear half the car apart to find it. Everything went together without having to make any modifications. The only thing I did different is that they show laying the pigtail out the floor to the outside and closing the tailgate on top of it. That's fine but I wanted something cleaner so I took out the spare tire and popped out a rubber plug close to the hitch and ran the harness through the hole and then rearward to the hitch. And the wiring harness was still long enough to run it in this direction. I fabricated a new rubber plug with a hole in it to seal where the wire goes through the hole. When the season is over and i'm not trailoring for a while, I pull the wire harness back through that hole and put the original plug back in the hole and just store the harness inside with the spare tire.


Comments
After one year, no problems
Greg F - 12/09/2020


- 118467
by:
2017 Subaru Outback Wagon

The instructions were not very clear about where to mount things and where to route the wires to the hitch. I had to take off the tie down clip in the carpeted panel just to pull the panel or enough to see the factory connector and get it loose. Then I had to duct tape down the box because the double sided tape in the instructions were not included. I ended up finding a passthrough under the spare tire. It would be nice if the kit included something to seal it back up.



- 118467
by:
2014 Subaru Outback Wagon

I purchased the Draw-Tite Max-Frame Trailer Hitch Receiver and this wiring harness for my 2014 Outback 3.6R a year ago. Once you figure out how to remove the bumper, the installation is fast and easy. The online video on the etrailer site is extremely helpful. I have only towed a trailer once, but it worked great.



- 118467
by:

The product was great. The installation Material was easy to follow. Customer service was great. My Sales person Emily was efficient Correct and helpful



- 118467
by:
2016 Subaru Forester

If you want to deal with a company that has the sh*t together look no further. I can’t tell you how refreshing it is to actually be kept in the loop EVERY step of the way. Seriously there is nothing like it! I picked up a hitch for my Subaru. It was in stock, packaged securely, tracked exceptionally, and delivered early without incident. Thanks etrailer.com for getting it right!



- 118467
by:

Very easy plug and play. Would have liked the fuse holder wires to be longer for changing the fuse and would have liked the install to show how to route to the bumper since "leave plug in spare tire compartment" is not really the point of a trailer plug. But SUPER easy install. I routed the wires through the drivers side back of the tire compartment and tucked the module down inside the body cavity there. See pics



- 118467
by:

Loved the excellent parts we received. Ordered a tow package and wiring harness. Everything came in great. Packaging great- box with east handles to maneuver and good instructions. Accurate measurements.



- 118467
by:

Works great, and a bonus for 2020 Outback Limited owners - the plug you need is located just to your right as you look down at the spare tire, not under the trim to the left by the seats as the instructions say. Plus, there’s a plug to the bumper right below it for access to outside the car! I recommend going from outside-in since the flat-4 won’t fit through that hole



- 118467
by:
Subaru

This is the 2nd time I've bought a wiring kit from etrailer that was "Plug & Play". The stock Subaru trailer connector was right where they showed to be in the video & was easy to get to. I don't care for the idea of running it over the tailgate & body seal so I chose to run it through a conveniently placed rubbed plug in the spare tire well. The tire is held up off the harness by the hard insulation in the tire well bottom. A little silicone sealant around the harness where I snipped the plug to keep the water out & we're done!


Comments
It looks like you didnt put the converter box under the wheel well cover like the installation instructions suggest. Did you cut out some foam from the compartment tray to fit around it on the floor? Thanks, I like the idea of going the through the plug in the floor and putting the wire directly outside.
-- comment by: Dennis - 04/08/2015


Comments
Hi Dennis,Yes, I simply cut out a little bit of the foam panel. I wanted to keep the convertor box easily accessible. On the off chance it were to fail in the future it would keep it easy to test
-- comment by: Chris B - 05/07/2015



- 118467
by:

This wiring harness was easy to install. Pretty much plug and play. The trailer hitch is the same, easy to install. Watching a couple videos, the procedure was easy.



- 118467
by:

Wiring harness was fairly simple to install once the trim was taken out. I suggest you got to Harbor Freight and get the trim removal tool, made life so much easier. Trickiest part was running the wires under the car in a way that won’t touch anything hot or moving



- 118467
by:

The Curt Trailer Receiver Custom Fit- Class III -2" Item # CU89FR, I purchased for may 2021 Subaru Outback Touring. The hitch and the installation video were perfect, very easy to install. The T-One Vehicle Wiring Harness w/4-pole flat trailer connector item #118467, was also easy to install once figured out where the connection was located. From the videos which were helpful but not accurate. Simply remove the spare tire covers, ( not all the other covers ) look on the right underside of the plastic shroud ( maybe use a mirror ) there it is. As for the 4-pole mounting bracket totally unnecessary, since the hitch itself (unless you want to cut another section out of your bumper), is hidden behind the plastic shroud. I highly recommend this trailer hitch...



- 118467
by:

Have purchased from etrailer a few times now and have always been impressed at how quickly I have received hitches and wiring connectors and everything fight perfect. I also like the video instructions for installation. This time was a 2020 Subaru Forester.



- 118467
by:
2015 Subaru Outback Wagon

East to install with easy to follow instructions I mounted it a little lower so no trimming of the foam was necessary



- 118467
by:
2020 Subaru Crosstrek

Plug and play for my 2020 Crosstrek. Routed in spare tire well and used a couple of zip ties (secured to muffler hangers and bumper) to route to under bumper. First picture shows before sealing hole and taping down inside well. Second shows routing under car. Could use a few more feet of line to avoid being close to muffler. If your not using often just leave in with spare tire.



- 118467
by:

Great product for my 2015 Subaru Forester. I don't like seeing the whole hitch sticking out under the car, this one is hidden except for the receiver part. Also, the hitch is higher off the ground so it won't scrape at sharp angles.



- 118467
by:

I've been using this throughout the (very snowy) winter in combination with a bike carrier to haul fat bikes back-and-forth to the trails, as well as a few trailer hookups. No corrosion or loosening so far. This site is great because they provide a lot of support for installation, which saved me a few hundred dollars in installation costs.



- 118467
by:
2012 Subaru Forester

needed the hitch for my 09 forester to do light duty trailer hauling. functions as should, easy enough install. the hitch now has more rust than a 12 yr old south western ontario car tho, i will need to apply fresh paint already after 1 yr.



- 118467
by:
Subaru

This was a snap to install and the directions were clear. On my Subaru the plug is stored inside the car so it does not suffer the elements and corrode the connector pins.


Comments
This has been excellent, I had a very easy time installing. This kit ends up with the car connector stowed inside the car near the spare tire and is MUCH better- the connector does not corrode and there is no dangling plug around my trailer hitch. etrailer gave me good resources to walk me through the install- Great to work with!
J G - 02/11/2021


- 118467
by:

Installation was so quick and simple that I had to stop and check the instructions to confirm that I had done everything. I already had a 12 V circuit tester which (with my wife's help pressing the brake pedal and turning the turn signals on) verified that everything was working perfectly. This is highly recommended



- 118467
by:

Your video on how to install hitch and wiring was so simple to follow and easy to understand that I did not even need the instruction sheets. This video convinced me to do it myself and save money allot of money! The only problem while installing hitch I had was in enlarging the holes in my car. This was because of the material this section was made of , aluminum. or something of the kind, very soft. A die grinder would have made short work of this task. This part took the most time, about 30 min. the rest of the job was complete in another 15 min. I am speaking about the hitch, wiring took another 30 min., you will see why when you view my pictures. The wiring harness connectors fit into my cars harness like it was manufactured a the plant which built my car. The car dealer where I bought the car tried to sell me on them installing hitch and wiring because they claimed your products would need a lot of retrofitting. This was not the case at all. Everything you supplied fit perfect without any necessary modifications, however I did make a modification to the wiring harness to fit my own needs. I did not like the idea of sticking it out the trunk, so I went to local parts store and picked up a special bracket and connector to install onto the trailer hitch, thus having connector outside car as it should be. If I did not make this mod it would have only taken 10 min. to install. You can see this connector mod in the picture I am sending you. I have recommended this site to many other people in my fishing club and at work. My brother-in law has just ordered one for his car, seeing how easy my in-stallion was. With your help and a desire to save allot of money anyone can install a hitch, even if you never did one before. The two wire feeders for the bolts worked great, I never saw this technique before. Without them the job would have been tough to say the least. As you mentioned, it is wise to have another person help when it comes time to lift the hitch into position. My brother in -law helped me, now he is buying a hitch and I shall help him lift it into position. Maybe if I was not 63 I could have done the job myself.



- 118467
by:
2018 Subaru Outback Wagon

The Tekonsha wiring harness arrived without delay and was exactly as expected. Installation on my 2018 Subaru Outback went smoothly thanks to the excellent instructions and video that e-Trailer.com provides. The feedback and reviews of other customer are also very helpful. I reviewed the instruction video several times and read some of the reviews. I had absolutely no issue to install it in a few minutes. It is a little tricky getting my big fingers behind the panel to pull the connector down that is taped up with blue tape. Once you have that down, the rest is a piece of cake. I would also like to comment that I also installed the DrawTite 2" Receiver hitch. This installation went quite well, although I must say that the e-Trailer video, and instructions supplied with the hitch are not as good as the explanations of some of the reviewers. For example, it is much easier to pass the bolts and spacers from the top (inside the truck area) by enlarging the existing holes in the cargo area floor, rather than drilling a new hole in the bottom of the frame as per the instructions. I also discovered that it is possible to do this by only enlarging the two forward holes in the cargo floor, rather than all four. It is very easy to fish the rear bolts from the front hole if you pass the fish wire in from the bottom rear hole in the frame. Another trick from other reviewers that was very helpful is to mark the heat shield with a Sharpie from inside before you remove it and then drill it rather than trim it with metal shears. It gives a much nicer looking job. Finally, I discovered a trick that really helps to align the hitch when bolting it up. Take four of the M6 bolts that were removed from the heat shields and put them into their holes through the hitch. Once this is done, the hitch is perfectly aligned and you can tighten and torque the four large nuts holding the hitch in place. If you do this, your heat shield will bolt up easily without any issue of the bolts not aligning with the holes. Actually, there was one issue that is not mentioned in any of the reviews that I read, and it would be really nice if DrawTite could fix. This is that fact that the 2 forward original M6 bolts for the heat shields next to the frame that must pass through the hitch flange are too short with the spacer washer placed as per the instructions. The installation kit should include replacement bolts that are about 1/2 inch longer so that they can pass through the hitch flange and the spacer. Unfortunately, the original bolts are too short and stripped when trying to install because they were only holding with a few treads. Now I have to go an buy some longer bolts and repeat the process of lowering the mufflers and exhaust pipe to install them. It would have been nice to know before as I could have easily purchased them in advance. I am very satisfied with e-Trailer.com and their excellent website and service. It certainly is my first stop when looking for anything related to trailers.


51
5259
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring

  • Comparing Curt, T-One, and Hopkins Trailer Wiring Kits for 2018 Subaru Forester
    We have three trailer wiring options for your 2018 Subaru Forester. We have the Curt option # C56040, the T-One option (my favorite) # 118467, and the Hopkins # HM11143865. The reason I favor and recommend the T-One kit part # 118467 is because the converter boxes on the T-One kits have been proven to us as being the most reliable. Trailer wiring shorts will easily damage the converter boxes of these kits which renders them totally inoperable but we have found that the T-One converter...
    view full answer...
    Image 1 for
  • Parts Needed to Install 7-Way on 2021 Subaru Outback Wagon
    Since your 2021 Subaru Outback Wagon does not have factory trailer wiring you'd need to first install a 4-way with part # 118467 and then convert it to a 7-way with a 7-way adapter like the part # 37185 to give you the 7-way. But since you are wanting to have the 12 volt circuit active your best solution is the adapter # ETBC7L instead of the 37185 as it comes with the wiring needed to complete that circuit. This will work great with the trailer hitch part # CU89FR as well.
    view full answer...
  • How to Install 7-Way Connector on 2019 Subaru Outback Wagon
    We have exactly what you need to install a 7-Way connector on your new 2019 Subaru Outback Wagon so you can connect with the 7-Way on your trailer. You will need to start with a 4-Way harness and for this the Tekonsha T-One # 118467 will work perfectly. This custom harness will plug right into a factory port behind the driver's side trim panel for a completely "plug-and-play" installation. I have attached an installation video that you can even use for reference. Then once you have...
    view full answer...
  • Installing a 7-way Trailer Connector on a 2018 Subaru Outback
    We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific custom harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start with a plug and play 4-way and then convert it. I recommend using the Tekonsha, part # 118467, for the 4-way. It plugs in to a connector that's either behind a trim panel in the rear cargo area on the driver's side or in the spare tire compartment....
    view full answer...
  • Can the T-One Vehicle Wiring Harness for a 2021 Subaru Outback Wagon Be Secured Outside the Vehicle
    Yes, the T-One Vehicle Wiring Harness part # 118467 which is a fit for a 2021 Subaru Outback Wagon can be installed so that the trailer connector is secured outside to the trailer hitch. I don't have exact instructions on this but it's something we do in the shop all the time. There is going to be a grommet/plug in the bottom of the spare tire well (with tire removed) that you can cut a slit it. Once this is done, cut the bonded 4-wire harness a few feet or so from the converter box. Then,...
    view full answer...
  • Installing A 7-Way Trailer Connector On A 2020 Subaru Outback Wagon
    I do have an option for you Trevor but there is not a custom fit 7-Way harness available for the 2020 Subaru Outback Wagon. You will need to convert Tekonsha 4-Pole flat trailer connector part # 118467 to a 7-way connector with part # ETBC7. The Tekonsha 4-Pole flat is a custom fit harness that plugs into the tail lights of the Outback. I have attached an installation video for your reference. Once the 4-Pole flat trailer connector is installed you can use the ETBC7 kit to convert it...
    view full answer...
    Image 1 for
  • Trailer Wiring Recommendations for 2020 Subaru Crosstrek
    For your 2020 Subaru Crosstrek I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467. It gives you all the required lights you need to tow a trailer safely down the road, tail lights, turn signals and brake lights. I think the best part of the wiring is that there's no cutting or splicing at all, it simply plugs into a port in the rear hatch area of your Crosstrek. The floor coverings and a few panels will need to be removed and you can use a trim panel...
    view full answer...
  • Recommended Trailer Wiring Harness for 2019 Subaru Crosstrek
    You are right that there are a few custom trailer wiring harnesses available for your 2019 Subaru Crosstrek, but I specifically recommend the Tekonsha T-One # 118467. Like the alternatives, this is going to plug right into factory ports in the rear cargo area for a completely plug-and-play installation. What separates this harness though from the others is the converter box that Tekonsha uses for their kits. They are built to last and we rarely ever see issues with them from customers writing...
    view full answer...
  • Parts Needed To Add A 7-Way Connector To 2009 Volvo XC70
    I can definetly recommend the parts you will need to add a 7-way connector to your 2009 Volvo XC70. You are correct that you will first need to add a 4-way connector to your vehicle. I recommend the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143735 which will be a plug and play installation that will use its own power wire connected directly to the battery to protect your vehicles factory tail light wiring harness. The Tekonsha T-One Wiring Harness # 118467 you were looking...
    view full answer...
  • Brake Controller and Trailer Connector Recommendation for 2020 Subaru Outback
    In order to install tow a trailer with brakes, you'll need to install a brake controller. From an installation standpoint, the easiest option to use would be the Curt Echo, part # C51180. To install the controller, you'll first need a 4-pole trailer connector, which would be provided by part # 118467. You'd then need the brake controller installation kit, part # ETBC7L which includes an adapter to convert the 4-pole connector to a 7-way. The adapter will need to be grounded to the vehicle...
    view full answer...
  • Trailer Hitch Recommendation for 2020 Subaru Outback For Towing
    We can get your 2020 Subaru Outback set up to tow your R-Pod, and let's go ahead and start with the trailer hitch I recommend, which is from Draw-Tite: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT73RR This hitch fits all models of 2020 Outback, including your XT, and I really like it for a couple reasons, starting with the install. Of each of the hitches for your Outback, this is the only one that doesn't require you to remove the bumper for installation. The # DT73RR will require...
    view full answer...
  • Installation of Prodigy P3 Trailer Brake Controller in 2018 Subaru Outback Wagon
    Brake controllers, including the Prodigy P3 # 90195 will need to be hardwired into your 2018 Subaru Outback Wagon. To do this there are a few parts you are going to need, starting with a 4-way connector if you do not already have one. For your '18 Outback you can use 4-Way Trailer Connector # 118467 (please note this will not work with Sport models). I have attached a link to a video of this connector being installed on a 2018 Outback Wagon for you to check out. You will also need the...
    view full answer...
    Image 1 for
  • What is Needed to Install Redarc Tow-Pro Elite in 2014 Subaru Outback
    In order to install the Redarc Tow-Pro Elite # RED44FR in your 2014 Subaru Outback, you will need the 7-way wiring kit you mentioned, as well as a 4-way if you don't have one installed already. The exact parts are as follows: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 - Universal Installation Kit for Trailer Brake Controller # ETBC7 - Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR The 4-way is needed in order to activate your trailer's...
    view full answer...
  • Finding Trailer Wiring Install Connector for 2020 Subaru Outback for Tekonsha Trailer Wiring
    Sounds like you did find it. We've heard the trailer wiring harness the 2020 Subaru Outback has for installing the # 118467 can be buried a bit and that you have to reach pretty far back to get it so based on what you described you have found it. I attached an install video link to this page that shows how we found it on a similar 2019 Outback. Here's text from a review we got from a customer detailing their experience finding the harness as well: "The only problem I had was in "finding"...
    view full answer...
    Image 1 for
  • Recommended Trailer Wiring Harness for 2020 Subaru Outback Wagon
    For your 2020 Subaru Outback Wagon I highly recommend the Tekonsha T-One Wiring Harness # 118467. This custom harness will plug right into an existing port in the vehicle's rear cargo area, either behind the driver's side trim panel or in the spare tire compartment. This is a simple "plug-and-play" install and the Tekonsha converter boxes tend to hold up much better over time than those from other manufacturers. This will provide you with a 4-Way connector to power the trailer's basic...
    view full answer...
  • Trailer Wiring Recommendation for 2017 Subaru Outback Wagon
    In terms of keeping trailer wiring protected there is no better way to accomplish this than how the Tekonsha wiring harness part # 118467 is designed to be used. The 4-way is stored on the interior when not in use which protects it from road debris and developing corrosion from weather and then when needed pulls out of the hatch and the door is shut on it. The thick rubber door seal protects the wiring.
    view full answer...
  • Is Trailer Wiring Needed to Tow Cargo Trailer with 2019 Subaru Outback Wagon
    Yes, when towing with your 2019 Subaru Outback Wagon you will need a trailer wiring harness. For that the best option is the really easy to install and very reliable Tekonsha part # 118467. This plugs in easily at the back of the vehicle. I attached an install video for this for you to check out as well on similar 2019 Outback.
    view full answer...
  • Recommended Trailer Wiring Harness for 2019 Subaru Crosstrek
    For your 2019 Subaru Crosstrek I highly recommend the Tekonsha T-One Vehicle Wiring Harness # 118467, which will plug right into the factory port that's either located behind the driver's-side trim panel or in the spare tire compartment in the rear cargo area. I like the Tekonsha harnesses because they use a superior converter box that's known for its durability and long lifespan. This will provide you with a fully-functional 4-Way connector to power the basic signal lights on your...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Rick A
Test Fit:
Rick A
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Andrew K
Video by:
Andrew K
Employee Andrew L
Video by:
Andrew L
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Sarah W
Updated by:
Sarah W
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.