To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your Mitsubishi Outlander with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (136 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
So about a year ago I bought a reciever hitch, receiver cover,euro style ball and wiring for my 2010 Camry to tow a 4x8 foldable trailer for powersports......Installation was straight forward and dedicated an afternoon for install.....Directions for the products was easy to follow for both products.... so far the wiring is just as I installed it and the hitch is holding up great, you can barely notice that I have a hitch back there. I think it blends in nicely....I anticipate many years of worry free towing....
Customer service is top notch also ????
robert p - 07/03/2021Plug and play. Product just as described. 2nd time using etrailer.com very happy with my order
Easy to install the hitch. WIRING WAS EASY BUT TAKES A LITTLE LONGER TO INSTALL. E-Trailer video helps with wiring.
Plug and play! Worked perfectly
Easy to install, about 30 minutes from start to finish. Instruction video was easy to follow along with.
Perfect fit.
good product, good service, fast delivery. thanks.
worked as listed
Ordered the tenkosha plug and play trailer harness for 2018 outlander with curt hitch .both fit perfect and work well this far ,been about a year . Seem like a good product ,order was easy ,came timely ,and was the right product ,price was good . I call it a win
It was good fit for my car, good video for support .
It took us a while to install because we have little background on pulling trim panels off and knowing where to find things. But, we watched the YouTube video and with the instructions we were able to install the wire harness with little to no problem.
Amy H - 06/12/2018Installed perfectly and works every time we use it!
The item worked OK only once, the first time. I have done some testing. There is continuity from battery to unit. There is continuity from unit's ground to trailer plugin. The lights on the car work fine with the unit's wiring: it gets feed from car controls. The unit is fully sealed so I cannot test continuity from unit to plugin, other than mentioned ground connection. Visually the wires from unit to trailer plugin are fine. I highly suspect the unit itself and not the wiring. I have tried the suggestions online to unplug power to it for some time to no avail. Needless to say, poor rating.
I had an excellent experience with your company. The product came on time, was complete, and the online tutorial was compelety accurate and helpful!
I couldn't give it 5 stars because I haven't put the wiring harness on yet, but it sure got here fast...like two days. I certainly appreciate that.
DON M - 04/02/2018This is my 2nd trailer hitch from e-Trailer. I have a small trailer I use to haul brush, furniture & my recumbent bike. I was very pleased with my first hitch, but after getting a new car, I needed another hitch. The quality products and video instructions make it straight forward to install. My kit required a wire to run from the back of the vehicle to the battery in front. The video outlined the best path to route the wire to avoid hot parts or areas where the wire could be damaged. The connection at the battery included a fuse to prevent a electrical fire if somehow the wire got damaged, like in an accident. When I ordered the 2nd hitch, I received an email letting me know the hitch I selected was no longer available within 3 hours of my order. They suggested another hitch to fit my vehicle. Whenever the need for another hitch arises I know the only place I will go, etrailer.
My wiring harness has humbly done its work without complaining. A reliable technology
Installing hitch only took 20 minutes
You can hook the wiring power to the plug on passenger side. Lift up cup holder cover to access power . You don’t need to run to battery,
Fit my 2011 Toyota Camry perfectly. I wish that the ground cable would have been slightly longer to reach the factory ground. That being said, there is plenty of space to attach the ground with the supplied self tapping screw. Installation was simple, the only time consuming part is running the main power under the car to the battery (not an issue for hybrid models where battery is in the trunk). Everything tucked away nicely.
Ray G - 06/06/2017The wiring harness was straight forward to install.
This worked great. The only thing that was a little bit of a pain was to run the power wire to the battery. I ran it out under the car attached to brake and feul.line area from trunk to battery. It does work good i have a 98 Camry also that didn't need the power wire but at time I have issue with the 98 blowing tail light fuses. This one works great on the same trailer it is a 2 place snow mobile trailer. This one has side lights also
Works well but not particularly easy to install and directions were of little use. I tried to find a place to fish the power lead through the firewall for an hour but gave up and drilled a hole below and to the left of the steering column. Also, the directions for the Venza say to remove the cargo attachments and plastic in the back. It isn't necessary and doesn't actually help... just remove the black trays and the small access panels for the tail lights. You can reach down and disconnect the wiring harness but it helps to pull the harness away from the tab that secures it to the chassis.
This kit made the wiring easy. No question about what went where or how to get it there. I can't wait to get a trailer for my canoe to hook it up. Thanks.
I purchased a light kit for my Camry and loved it, worked great without putting a load on the car wiring. So when I needed lights for my Venza I went back to etrailer and it was promptly sent to me. This one however had an issue. When I notified etrailer they helped me trouble shoot and when the box was the problem, promptly replaced it. Very happy with the with the service.
Wiring harness fit the vehicle very well. My only suggestion is that a bracket should be shipped with either the wiring harness or the trailer hitch for the external mount of the four-wire connector. The wiring instructions suggest that the four-wire connector be stored in the trunk and extended out of the hatch when using with a trailer. The harness is made to go through the knockout on the driver's side and connect via a bracket on the trailer hitch. The installer just needs to squeeze the four-wire connector to push it through the rubber knockout opening, and then slit the rubber knockout to fit the flat wire of the four-wire connector.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.