T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118669
Retail:$113.93
Our Price: $62.95
You Save: 45%
Confirmed to Fit
2018 Ford Edge
SE and SEL
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
- All Info
- Reviews (91)
- Q & A (0)
- Photos
- Why etrailer?
2018 Ford Edge - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Ford Edge with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118669 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118669
Average Customer Rating: 4.7 out of 5 stars (91 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: John04/13/2022
2015 FordEdge
Obviously the item I received was used return but charged full price,hopefully etrailer will make this right
Comments
We hate to see this kind of damage. I have sent this over to our customer service team for them to better assist you.
-- 
Katrina B - 04/21/2022by: Larry03/17/2018
2015 FordEdge
I'm a pretty good DIY person, so when I saw a plug and play installation of trailer wiring specifically made for my Ford Edge, I couldn't believe it. Just in case you don't want to cut, splice, heat-shrink the factory light wiring circuit you can plug T connector in and install taillight back in place.
The hardest part of this installation is the module power wire that has to be run from the rear bumper to the vehicle battery. Note: if you plan on making your vehicle a towable behind an RV like me, you should run both the 12V power wire and your toad trailering lights together saves having to install later.
by: RCS12/30/2020
Well made, easy installation and just a first class product from a very customer oriented company. The videos are outstanding.
Comments
Working great! It’s a high quality product and holds up well. One issue with the connector staying in the mounting bracket and I have to tape it to stay. Not a big issue but one that could be addressed. Would buy the kit again without hesitation and recommend it all.
RCS - 12/31/2021by: Gary05/29/2022
Excellent product. Installation was a bit trying. Feeding the wiring up through the body and into the taillight assemblies was the toughest part of the intall.
by: LUKE12/09/2022
easy install, works great!
by: Justin R.06/22/2017
FordEdge
Got it yesterday, had it installed this morning.. looks great.. I am now an etrailer.com fan and will be coming here for any vehicle need I have moving forward!
by: Chris 08/08/2022
Complete kit and works fine.
by: Kip C05/29/2018
2016 FordEdge
Lightning Fast Shipping. The online video made the installation a snap. I highly recommend etrailer.com.
by: Phil P04/23/2019
2015 FordEdge
Trailer Wiring Harness for 2015 Ford Edge:
Harness is well made and plugs into existing sockets. Installation video is very helpful, but also somewhat deceiving. Running the plugs and wires up through the small area in the body's rear panels is not nearly as easy as shown. This proved to be the most difficult portion of the install. On the driver's side, I had to remove the existing wiring to feed the harness wiring due to room constraints. (Larger on this side than passenger side). Following this, I ran the original harness up through the passage. Once installed, everything plugs in as shown on the video. You will need to push the plugs and wiring back down into the passageway to reinstall the taillight assembly (sufficient wiring to do this).
You also need to run a hot wire up to the battery. The Edge underside is all heat shields and cover plates, with little opportunity to snake a wire up to the front of the car (run on driver side where the battery is located). Looking down from the open hood, I saw a SMALL opening through to the pavement and ran a long rod down, taped the wire to it and pulled it up to the battery compartment.
Previous to this, I had installed a 2 inch receiver hitch to the Edge. The harness was much more difficult to install than the hitch.
Overall: Well made as said, works well, sufficient wiring if you choose the shortest paths. However, Difficult to install. Would not recommend installing yourself unless you have considerable patience. Probably worth taking to a shop with an overhead lift.
Comments
Working perfectly after 1 year. Use the Hitch and Harness regularly. No issues. :0
Phil P - 04/24/2020by: Good System, Works Perfectly08/18/2020
Works just fine. A bit fiddly to install, especially the power wire up to the battery. Overall, very satisfied with the performance. No problems, at all.
Comments
Works Flawlessly
Will K - 08/19/2021by: Stans Automotive10/12/2022
Fast delivery. Very impressed.
by: Mike 10/11/2021
Received the hitch quick and items as described. Fit well and installed in about an hour. Only complaint I have is the packing box was torn thus, some of the powder coat was knocked off the corners or the hitch.
by: James06/16/2018
2016 FordEdge
I received the product on time and in good shape everything was as it was supposed to be when I ordered it simple directions and easy to install no problems whatsoever.
My only issue which has nothing to do with the product, the issue was, I have a 5 wire flat on my trailer and I need to know how to convert the 4 wire I installed, to hook up to the 5 wire plug on the boat trailer.
Comments
Everything has been ironed out and Im very satisfied with the product itself and how it is lasted until today.
Jim - 06/16/2019by: James11/12/2019
2015 FordEdge
I can report that the Tekonsha 118669
trailer wiring kit was finally installed and working. It was not the easiest to do but with some re-engineering it was connected. The wires to the drivers side were not long enough and had to be spliced. The very large connection
plugs were too large without the body panel being pulled apart but I worked around that issue since the wires had to
be spliced anyway. The Ford tail light connection plug had to be unmounted to make room for the "kit wiring plugs",
Difficult installation but I got it installed and it works.
by: Ken L.09/12/2016
I gave the 2 stars because of the fast delivery of the product and for the beat quality of the product. I had problems with install of the wiring harness. I called for suggestions and was told to use a coat hanger to pull the harness up. Problem on my car, the harness plugs could not be pulled through because the factory plug was in the way and could not be removed. I had to try and remove it, cut the wires, fish the harness wire up and then splice them together again. The passenger side was harder because the fish wire was sent to smaller area of the frame. Wires are just long enough.
The hitch was easier but the video shows easy installation because they have removed the entire exhaust system. This allows the installer to reach into the rear of the frame to pass the backing plate and bolt. Reaching into the space between frame and bumper is difficult since you can only use two fingers to feed the parts in. At times it is difficult to feed the fish wire into the correct spot. The rest of the installation was easy once the bolts were in place.
by: Jay03/22/2018
2017 FordEdge
I had previously installed a hitch on a 2014 Ford Edge and ran the wires inside the car. With my 2017 Ford Edge, the instructions were to run the wires under the car on the outside. This is not the product's fault, but running a wire from the battery at the front of the car to the hitch at the rear of the car proved to be way more difficult than I ever would have imagined! Ford has an undercarriage "sheathing" that, when coupled with the fact that I didn't want the wire anywhere near moving parts, made it pretty difficult! What I thought would take 10 minutes took over an hour!
by: Henry 11/08/2021
Still working great. Remember to unplug when launching your boat and keep the cap on the plug when not in use. Should last a long time.
by: John04/10/2020
Finally finished the project! Took my wife and i two days to install hitch. Then recuperated for a day. Day three we did the wiring at rear of car. Got the black power wire half way to the front. Tired crawling under car without a lift.
Day four, with help from NAPA and cable puller got power wire rest of way up to battery and connected. Tested OK. Do I get a prize for the longest install?
Although it only took him online 16 minutes. And so it goes
by: Neil07/04/2018
2017 FordEdge
This harness is meant to be completely external to the car, according to the video. In other words, it does not cross through the trim inside the vehicles inner molding. Where the vehicle hatch lid closes.
THIS HARNESS IS A LOGISTICAL NIGHTMARE TO RUN FROM DRIVES SIDE TAIL LIGHTS TO THE PASSENGER SIDE TAIL LIGHT OVER AND AROUND THE HITCH RECEIVER. Don't be fooled by the install "video" on a Ford Edge SEL. Trying to zip tie the wiring away from the hot exhaust pipes will take many zip ties and tricky placement to avoid damaged wires, not to mention, the wiring is exposed to all the elements. The "T" connector wires should be longer so they can be tucked out of the way so as not to interfer with trying to reinstall the tail lights back in place. You will notice, the training video is edited right after they tell you to put the tail lights on, but don't actually show the process of doing so. It is more difficult than it looks, because the "T" connectors hold the light assembly out from the body of thr car. It takes a lot of fooling around to get the connectors exactly in the right spot. This is why I say, the "T" connector wires need to be longer to get them out of the way. YOU'VE BEEN WARNED. Buy the wiring kit that goes under the trim, INSIDE the car. etrailer themselves is great to deal with, but not this wiring harness. I am glad no one was around when installing this wiring kit, summed up in one word, frustration.
by: Scott 10/11/2019
2018FordEdge
First time installing a hitch and wiring but I'm familiar with vehicles and consider myself an above average shadetree mechanic. Hitch went on as expected, no issues with fitment of installation of hardware, the wiring was not as straightforward as shown in videos.
After 10-15 minutes of trying to fish T connectors up to the taillights, I decided to pull the rear bumper cover. This simply consisted of removing 7 5.5mm fasteners in each wheel well and popping the plastic cover off the retaining clips. Extremely easy and only took a few minutes.
With the cover off, it was simple to remove the factory taillight wiring connector from the mount and install the trailer wiring. A nice surprise was the ability to remove the white clip that mounted the factory connector to the body and install it on the new T connector. This eliminated the 'extra' wiring at the taillight assembly others mentioned was difficult to work around.
I mounted the black control module behind the cover and ran the passenger wiring along the bumper frame, nice clean installation. I ran the main power wire like mentioned in other reviews, under the vehicle into the engine compartment and made the connection at the battery. Overall the install took me around 3 hours, which I could cut in half if I was to repeat the process.
by: Mark E.12/10/2016
2016 FordEdge
The fit is as advertised and it looks custom. It took less than an hour to install crawling on my garage floor by myself, so if you have a lift and a friend it's fun and easy. hook it up to my 5x8 landscaping trailer and all the lights worked perfectly with the wiring kit. highly recommend this hitch receiver.
by: Tom D04/23/2019
Thanks etrailer! I installed my hitch and wire kit in short order,followed the video and WALLA!! ALL done!!! Thank You great product I’ll recommend to friends!
by: Ryan04/12/2022
Easy to install and works well
by: Paul F.07/12/2017
2015 FordEdge
The Wiring harness was just as expected and it even had heat shrink connectors!
Very nice it was as complete as it was, only thing I disliked was the power wire that I had to run to the front of the car was a splice connection to the new harness, I don't get why they just don't make that part of the harness.
Great price, good quality.
by: Marsh F.10/05/2020
after a year and 8 months its flawless. the hardest part was crawling under the car to route the harness to the engine compartment but the instructions greatly simplified the installation.
25
91
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Does the Power Need to be Run to the Battery When Installing the T-One # 118669 on a 2017 Ford EdgeThe converter on the Tekonsha T-One # 118669 will need to have the Black wire run to your battery for the 4-Way connector to function properly. It is designed to draw power directly from the battery itself so that the wiring on your 2017 Ford Edge is not affected. The connectors basically get tripped when your brake lights/turn lights/ running lights are activated and tell the converter to send power to the trailer lights.
view full answer... - Fit Recommendation for 2016 Ford Edge Trailer Wiring HarnessThe trailer wiring harness I recommend for your 2016 Ford Edge is the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118669. This wiring harness is designed to fit Edges like yours that are neither Sport or Titanium models. The T-One Wiring Harness # 118669 will plug into your Edge's wiring behind the vehicle's taillights. This will not require you to splice into the factory wiring at all. You will need to run a power wire for the harness's powered converter...
view full answer... - Can I Wire My Trailer Wiring Harness on2015 Ford Edge to the 12v Aux Instead of the BatteryI strongly recommend running the Tekonsha T-One Vehicle Wiring Harness # 118669 directly to the battery since the 12 volt accessory plug's circuit is not designed to support the additional load of a trailer wiring harness. A wiring harness needs its own dedicated circuit directly to the battery to provide adequate power and avoid overloading the electronics circuits in your 2015 Ford Edge. We have seen many instances where customers have tapped into a 12 volt accessory circuit, like a car...
view full answer... - Installing Trailer Hitch on 2017 Ford EdgeWhen installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75234 on your 2017 Ford Edge, the center plastic panel with heat shields will need to be removed. This will not affect the integrity of the bumper and the hitch itself will actually act as a heat shield so there will no loss when removing this panel. You will not need to make special brackets to support the bumper after the hitch is installed. I have attached an installation video on your 2017 Ford Edge so you can see exactly...
view full answer... - Recommended Trailer Wiring Harness for 2017 Ford Edge SELFor your 2017 Ford Edge SEL, the best 4-flat trailer wiring harness is from Tekonsha: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118669 The # 118669 harness is the best because we have found over time that Tekonsha makes the most reliable trailer wiring harnesses in the industry. This harness also has the highest amp ratings, which means it gives your Edge SEL the best prevention against any potential shorts. To mount it you can use Brophy Mounting Bracket for...
view full answer... - Trailer Wiring Recommendation for 2017 Ford Edge SELTrailer hitch and wiring installs are totally separate so if you don't need wiring yet for your 2017 Ford Edge there really isn't anything to gain by waiting to install it later. Since we have special shipping deals on orders over a certain amount though I would recommend ordering the wiring now so that you don't have to pay to have it shipped later if that's something you'd be interested in. Since we have the best luck with the Tekonsha brand trailer wiring harnesses I would recommend...
view full answer... - Recommended Trailer Wiring Harness for a 2017 Ford EdgeThe correct trailer wiring harness for your 2017 Ford Edge is the T-One Vehicle Wiring Harness part # 118669 if you have the SE or SEL model and part # 118677 if you have the Sport or Titanium model. I have attached an install video on each option for you. They are both essentially plug and play. The plug in the rear wheel well is not for the trailer lights and they do not make a harness for your Edge that uses this plug.
view full answer... - Recommended Trailer Hitch Reciever For 2015 Ford EdgeFor your 2015 Ford Edge, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver Class III - 2", # 75234. This is a very similar style to the hitch you had on your 2013. There was a change in the frame from 2014, and there is not an adapter kit to use the 75709 on your 2015 model. For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118669. This will plug in behind your tail lights to your factory plugs and then the wire run...
view full answer... - Troubleshooting Trailer Wiring of 2016 Ford Edge Where Right Side Circuit Doesn't WorkHere's how we determine if the problem is the converter box of the trailer wiring harness you have installed on your 2016 Ford Edge.Test the wire green wire that runs to the converter box from where it attaches to the vehicle wiring. If there is voltage there with the blinker but it's weak on the other side of the box then the box is faulty. I suspect it is the converter box, but if you can test that for me we'll know for sure.
view full answer... - Recommended Vehicle Wiring Harness For 2020 Ford Edge SELTekonsha does make a vehicle wiring harness confirmed to fit your 2020 Ford Edge SEL. You will need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118805. The Tekonsha # 118669 you purchased is only confirmed to fit the 2015-2018 Ford Edge SEL or SE. I included a video of the # 118805 being installed on a 2020 Ford Edge SEL for you to take a look at.
view full answer... - Will Installing Trailer Hitch Increase Towing Capacity of 2015 Ford EdgeThe Draw-Tite Class III Max Frame Receiver Hitch # 75234 referenced in your question is confirmed to fit your 2015 Ford Edge. While this particular hitch does have a higher towing weight capacity of 4,500 pounds it will not actually increase the towing capacity of your vehicle. You will still need to adhere to the 2,000 pound limit of the vehicle itself, as you are always limited by a system's weakest component. Because of this no aftermarket product will actually raise the factory towing...
view full answer... - Trailer Hitch Recommendation for 2018 Ford Edge with Concealed CrosstubeFor your 2018 Ford Edge we have the Draw Tite hitch part # 75234 that I recommend for you because it has a hidden crosstube which means it'll be less visible than most to give you the hidden look you want. It also has higher towing capacities and a 2 inch opening which most accessories are made for. I attached a picture and an install video for you to check out as well. For trailer wiring you'd then want the T-One kit part # 118669 which has our most reliable converter box and because...
view full answer...
- Vehicle Blinkers Not Working Correctly After Installing Trailer Wiring Harness on 2017 Ford EdgeIt sounds like your 2017 Ford Edge thinks that a bulb or bulbs are out which would explain why the one side blinks quickly and the other side does nothing. Trailer wiring harness # C56292 is designed for the Sport and Titanium models of the Edge so if you have an SE or SEL I recommend # 118669. If you do have a Sport or Titanium then check to make sure the white ground wire is attached to a clean and corrosion free bare metal surface. There can't be any kind of coating on the ground surface...
view full answer... - Will Draw-Tite Trailer Hitch 75214 Interfere with Hands-Free Liftgate on a 2017 Ford Edge SELWith Draw-Tite trailer hitch # 75214 installed on your 2017 Ford Edge SEL the Hands-free Liftgate sensor areas will be limited to areas away from the center where hitch receiver opening is located. It tends to vary a little from vehicle to vehicle. Some people have limited access, some don't, but I haven't heard of this hitch completely blocking the sensors. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise...
view full answer... - Trailer Hitch and Wiring for a 2015 Ford Edge SportThere is a trailer hitch that will fit your 2015 Ford Edge Sport. You can use trailer hitch # 75234. I have included a link to the installation instructions for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the...
view full answer... - Will Draw-Tite Trailer Hitch 75234 Interfere with Power Lift Gate on a 2015 Ford EdgeThe power lift gate option on the 2015 Ford Edge should not be affected by installation of trailer hitch # 75234. It may not work every time if you try it directly under the hitch receiver but other than that there are no reported issues of the hitch interfering with the power lift gate. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
view full answer... - Draw Tite Trailer Hitch Recommendation for a 2016 Ford EdgeFor a Draw Tite hitch for your 2016 Ford Edge SE or SEL model the part # 75234 would be the correct hitch to use as it is a confirmed fit and has a 2 inch opening which means more towing capacity and hitch accessories made for it. I attached an install video for more info. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
view full answer... - Ford Edge SEL 2016 with Rear Door Sensor Trailer Hitch RecommendationFor your 2016 Ford Edge SEL the Draw-Tite part # 75234 has been confirmed as a fit and would work with the automatic rear door sensor. You just would be limited to the areas on either side of the hitch for activating the sensors. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch...
view full answer... - Troubleshooting Tekonsha T-One 4-Way Harness With No Brake Lights On a 2017 Ford Edge SE or SELWith the Tekonsha T-One Vehicle Wiring Harness # 118669 installed on your 2017 Ford Edge SE or SEL you will first want to ensure that your brake lights on your Edge are still working when you press the brake pedal. This will ensure that a fuse wasn't damaged on your Edge. Since your Edge shares the same tail light circuit for the turn signals and brake lights similar to how the tail lights on your trailer work we know that power is going into the powered module on the harness. You can...
view full answer... - Best Trailer Hitch and Wiring Harness for 2018 Ford Edge With Hands Free LiftgateThe trailer hitch I highly recommend for your 2018 Ford Edge SE is the Draw-Tite # 75234 because it has a concealed crosstube which hides everything but the receiver, and it will still allow you to use the hands-free liftgate feature on your Edge. You will only need to kick to the sides of the hitch receiver as opposed to the middle. If you take a look at the accompanying photo of the Draw-Tite hitch installed on a 2018 Ford Edge you can see that it is almost entirely hidden behind your...
view full answer...
- Does Heat Shield Get Removed to Install Draw-Tite Trailer Hitch on a 2017 Ford EdgeThe instructions for Draw-Tite trailer hitch # 75234 for the 2017 Ford Edge state "for Edge Sport and MKX AWD model, remove (6) bolts and (1) flange nut attached on center plastic panel with heat shields, see Figure 3, and then remove the panel. Return to owner." See instructions linked for reference. This means that on the affected models the heat shield would not be reinstalled. The hitch itself can act as a heat sink though so nothing is really lost with the removal. I have linked a...
view full answer... - Does Draw-Tite Trailer Hitch Receiver Come With Trailer Wiring Harness?The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75214 for your 2015 Ford Edge does not come with a wiring harness. For the wiring harness I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118669 which will connect to your tail light wiring harness perfectly. Then you can use mounting bracket # 18144. For a ball mount I recommend the etrailer kit # 989900 to give you multiple options at a great price so you can tow many trailers...
view full answer... - Do Trim Panels on 2015 Ford Edge Get Permanently Removed to Install a Trailer HitchThe panels in question on the 2015 Ford Edge will either need to be removed or trimmed for the hitch installation. I would just remove them and store them in case you ever wanted to remove the hitch so that you could put the panels back on if you wanted. Neither removing them nor trimming them should void the warranty of the vehicle because you are protected by the Magnusson-Moss Warranty Act. Trimming or removal of the panels is required for any of the available hitches for your Edge. If...
view full answer... - Does Installation Of Draw-Tite Trailer Hitch For 2016 Ford Edge Require Trimming Rear FasciaPer the installation instructions for the Draw-Tite Trailer Hitch for your 2016 Ford Edge, the rear fascia is not trimmed. In the instructions it does say the fascia is lowered for the hitch installation but no mention is made about trimming. The laast step of the attached instructions say to reinstall the fascia along with the hardware. The # 75234 is a Class lll hitch and it has a 2-inch receiver opening. If you plan on doing some towing you might be interested in etrailer ball mount...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate custom fit vehicle wiring information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Victoria B
Video by:
Joshua S
Video by:
Dustin K
Video by:
Jonathan Y
Video Edited:
Jacob T
Video Edited:
Chris R
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.