View Cart
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118329

lowest price pledge

Retail:$38.60

Our Price: $23.60

You Save: 39%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping

Shipping Weight: 0.68 lbs

Quantity: 
In Stock, Ships Today
Tekonsha 4 Flat Custom Fit Vehicle Wiring - 118329
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos


  • Custom Fit
  • Trailer Hitch Wiring
  • Tekonsha
  • 4 Flat
  • No Converter
Call etrailer.com at 800-298-8924 for expert service. We are your Dodge custom fit vehicle wiring experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Tekonsha products for your Dodge 2001. T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part 118329 from Tekonsha can be ordered online at etrailer.com. Complete custom fit vehicle wiring installation instructions and technical support.


  • All Info
  • Reviews (185)
  • Q & A (98)
  • Videos (8)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118329

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points along frame rail
    • Plug in T-connector
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located at the rear, along the inside of the frame rail on both the driver's and passenger's sides.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.



118329 Tow Ready T-1 T-Connector - 4 Wire



118329 Installation InstructionsInstallation Details 118329 Installation instructions

California residents: click here


Video of T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118329 Review

Today, we're going to be taking a look at the T-One Vehicle Wiring Harness with a 4-pole flat trailer connector. This product is going to fit multiple years and models of Dodge trucks. To see if this is a fit for your vehicle, you can use the Vehicle Fit Guide located at etrailer.com. This unit's going to provide a 4-way, flat trailer connector at the back of your vehicle. It's going to power your trailer signal lights. It is compatible with 5-pole, 6-pole and 7-pole adapters.

Adapters are sold separately. It also comes with a dust cap for the 4-way flat connector. That way you can cover up the connection points when the plug's not being used. The benefit of a system like this, or one of the main benefits, is how quickly and easily it's going to connect. It does not require any cutting or splicing of your wires. All you have to do is locate the connection points along the frame rail.

Those are going to be located at the rear, along the inside of the frame rail on both the driver's and passenger sides. Once you have those located, simply take your T-connectors and plug them in. The connector with the yellow wire goes to the driver's side. The connector with the green wire goes to the passenger side. Now, these plugs are going to match up perfectly with the ports on the vehicle.

They're going to push together. They're going to snap-lock together, which is going to give you a nice tight, secure fit. Once you have those connected, you can use the included cable ties to secure any excess wires. Then, the 4-way flat connector is going to be routed toward the center of the vehicle, near the hitch. Once the installation is complete, this going to be stowed beneath the vehicle. We do recommend a mounting bracket to keep the connector secure.

It's not included, so it is sold separately. If you need one, you will find a bracket here, at etrailer.com, or you can just loop it around your safety chain loop on the hitch. The maximum amperage is going to be 7.5 amps per circuit. It's also recommended that you use a small amount of dielectric grease on all your electrical connections, like the plugs on the vehicle and the 4-pole connector itself. The grease is really going to help prevent corrosion to the connections points. If you need some of that, you can find it here, at etrailer.com. It's sold separately as well. It's also going to come with your detailed installation instructions. These are going to walk you through your installation process, step by step. That's going to do it for today's look at the T-One Vehicle Wiring Harness with the 4-pole flat trailer connector.


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118329

Average Customer Rating:  4.9 out of 5 stars   (185 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

- 118329
by:
2012 Dodge Dakota

Ordered a hitch for my Dakota on Monday and it arrived (cross country almost) in 4 days. Amazing...free shipping at that. I can't recommend Etrailer any higher. The hitch went in....well.....without a hitch. A suggestion: If you don't have a deep 3/4" socket get one before you start. Also a vice grip on the hex bolt top with the flange nut makes life a lot easier. My 12 year old daughter became adept at identifying and delivering the proper parts while I was under the truck. She's skilled at this now and is available at $30/hour plus expenses. Joking aside, the folks at Etailer have their act completly together. 52230



- 118329
by:
Dodge

After installing a receiver hitch and crawling under my truck trying to scope out a spot to splice into the wiring harness, I noticed convenient couplers in the wiring on both frame rails so I went to the dealer to ask if there was some sort of plug and play trailer wiring that Dodge offered for their Dodge PU's They looked at me sort of dumbfounded and dint even comprehend for the longest time what I was even trying to describe to them. After the 3 explanation of what I wanted they said "Good Idea but no we have nothing like that." Well I wasn't going to give up that easily so I started looking online. I figured if I could not find one I might invent one and make my Millions right!.. Well it didn't take lone before I once again realized someone already beat me to my wonderful idea. So I ordered up a set and the 7 way matching trailer plug to go with it. Renee at etrailer was super helpfull and assured me Id get it in time for Fishing seasons opening week end. UPS had a hick up and it was a day late making me a bit nervous but it still came in time. The product looked of good quality and my only complaint is the tolerances on the plugs don't match the factory plugs very well they are VERY tight and almost impossible to seat in all the way so I hope I don't have issues with them coming loose or the contacts arcing out. But it was definitely the way to go and so much better then hacking in a splice job like most of us have done in our lives. All the lights functioned perfectly on the drivers side first shot but I had to fight with one of the plugs on the passenger side as I stated they did not want to seat all the way in. I didn't see or think to ask Renee about a mounting bracket for the 7 way so I made my own out of some scrap metal I had around my shop. Whole process took me about an hour including making and installing the bracket. Good product, great service from the folks at etrailer and I highly recommend buying form them. They are totally on top of all communication by email to their customers. Kudos to etrailer for building faith in the market place one customer at a time. They have all my future business that's for sure. I'm ready for fishing in the morning! Now what other idea can I come up with dang-it!..lol 127439


Comments

some problems with the connectors now not making good contact...i may have to shave the bodys down so they slip in better

Scott H - 04/25/2015

11140

Thanks for your follow up and reply. We also recommend brushing off the any dirt, debris, or corrosion that may have built up over time on the connector blades, and prongs, then use a little dielectric grease # 11755 to make ensure a good electrical connection.

-- Rachael H - 5/12/2015


- 118329
by:

Product was shipped promptly, exactly as advertised, and easy to install. Its working like a charm. 653389



- 118329
by:

Easy to install and worked perfect. Plenty of length to run it to the trailer. Quality product 637098



- 118329
by:

Easy install , works great for my 2002 Dakota 4x4 629713



- 118329
by:

Works great, quick shipping 616017



- 118329
by:

Fit perfect and took all of about 2 or three minutes to install. Nothing to it and it works great. Again, another great service by etrailer and Cathy. Thanks again. Bill 609154



- 118329
by:

Product was a perfect fit. Plugged right in to factory wiring. Thanks 604976



- 118329
by:

The product was an exact fit to my 96 dakota.simply plug n play..moved cross country with uhaul in tow.never worried about lights or blinkers not working. I would highly recommend this wiring adapter opposed to wiring to your factory harness. Thank you etrailer for a quality product. 582657



- 118329
by:

simple to install great price 566046



- 118329
by:
2003 Dodge Dakota

The Wiring Harness was very easy to install! The step-by-step video was the best I've seen to date and gave me the confidence I was ordering the correct part the first time. The etrailer web site is very easy to navigate and extremely user friendly! I've already recommended this site to my friends. 555248



- 118329
by:

Knowledgeable , fast delivery 554711



- 118329
by:
2003 Dodge Dakota

So easy to install and the quality of the wires are very good. Thanks 553637



- 118329
by:
1996 Dodge Dakota

Connecting the wiring harness went well. I needed two more (longer) plastic zip ties to secure all of the harness out of the way. Testing didn't go quite as well. Everything worked except the left side turn signal. I took the tail light cover off of the pickup. The bulb is a two filament bulb; and both filaments looked fine when held up to a light. I didn't suppose it was possible to plug in a connector turned 180 degrees from correct. I guess that possibility needs to be checked next. 520451



- 118329
by:
2001 Dodge Dakota

I ordered this wiring harness with a hitch receiver. Both arrived quickly and on time. The quality of the product is outstanding. Installation was really simple. I had the receiver and harness installed in 20 minutes. I highly recommend etrailer!! 518555



- 118329
by:
1997 Dodge Dakota

Wiring fit perfectly which made it so easy to install. 511230


Comments

As long you install it right the first you wont have no issues like zip ties loose and extra wiring. Simple to tuck the connector behind the bumper you almost think it not there til you need it. Very easy to hide if you prefer to. Its cause I only use in the summer for towing.

John - 05/21/2019

55618

- 118329
by:
2018 Toyota RAV4

Installation literally cannot be any easier! Unplug, replug, repeat on the other side, done. I chose this harness because it did not require a separate ground wire to be installed on the frame, and I liked the permanently sealed splice sections. If you look closely at other harness options for this vehicle, you'll note the differences I'm describing. I'm very happy with this harness. 506635



- 118329
by:

Excellent product 504568



- 118329
by:
2000 Dodge Ram Pickup

The harness arrived quickly and was easy to connect — just disconnect a couple of plugs on the truck, plug each end into the harness, secure the harness wiring to the hitch and you’re done. And my truck’s tail lights still work too! Now I just need a trailer to hook it on to. 503349



- 118329
by:

I had trouble getting one of the connections on one side but I think that was due to the age and miles on my truck. Ron 503304



- 118329
by:
1998 Dodge Dakota

Very easy to install and works great. A whole lot quicker and easier than anything else. Worth the money 503190



- 118329
by:
1999 Dodge Ram Pickup

What an easy way to wire up for a simple trailer lighting. I'll never splice in wiring anymore. The "T-One Vehicle Wiring Harness" is the only way to go!!! 495751



- 118329
by:
2001 Dodge Dakota

I received my T-1 wiring harness in a timely manner, and it was very user friendly, easy to install. Took me only 10 minutes. 493442



- 118329
by:
1998 Dodge Dakota

Easy to install and works great. 491102



- 118329
by:
2000 Dodge Dakota

Quick, easy, plug and play design. Takes about 2 minutes to install the entire wiring harness. 487680



- 118329
by:

Worked perfect, plug and play. cant get any easier 480461



- 118329
by:

Great company, great products. The company kept me in the loop on the status of my order. The part was just right. Thanks 480196



- 118329
by:
2001 Dodge Dakota

Fast shipping and easy, simple installa tion. 466688



- 118329
by:

The installation could not have been easier, functioned flawless and all lights worked from the get-go!! 465942



- 118329
by:

I emailed etrailer.com through their website, got a fast accurate reply ordered the component suggested they worked flawlessly no complaints excellent service 444949


Comments

Still no complaints, works great!

Tim w - 10/22/2018

44896

- 118329
by:

I am so happy with my purchase. It was an exact match to the old harness and a snap to install. It seems to be very high quality as well. Thanks etrailer! 440786



- 118329
by:

Thank you for your prompt delivery and excellent product. 419606



- 118329
by:
2000 Dodge Dakota

was as advertised, easy to install. have not tested yet 411508



- 118329
by:
1998 Dodge Ram Pickup

Product worked perfectly. I did have some trouble separating the 19 year old connection but the wiring worked great. Many thanks. 409844



- 118329
by:

Installed in 15 minutes works great. I would recommend your product. 406608



- 118329
by:
2003 Dodge Dakota

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector: arrived a day early, plugged right into my Dakota, checked it with a test light and it all worked! If you want to improve this, add a little electrical grease to protect the contacts and put more than 2 zip ties in - but this is complaining on a high level :-) Very good product and fit! Herb 402910



- 118329
by:

I installed the wiring and it worked like it was designed to do. I am happy. 401146



- 118329
by:
1998 Dodge Ram Pickup

The wiring harness took just a few minutes to install. Works great. 400368



- 118329
by:
1998 Dodge Ram Pickup

Great product and the installation was less than 15 minutes 398982



- 118329
by:

installed as shown ,,,,,no worries mate. 397212



- 118329
by:

Quick n easy 379088



- 118329
by:
1995 Dodge Dakota

Took about ten minutes to install this (most of which was getting the truck's 21 year old connections apart!). Works great, great value for the money. 379030



- 118329
by:
2003 Dodge Dakota

Cheap! Easy! Shipping faster than expected. Thanks 377912



- 118329
by:
1999 Dodge Ram Pickup

Easy to install work great 377077



- 118329
by:

Easy to install. I was able to reach the wiring from underneath truck. Note: Wear safety glasses if under a rusty vehicle. I bought this and the hitch for a [retailer] move. Since then, I have used it for a couple more [retailer] moves. The hitch and the wiring have worked great. 372424



- 118329
by:
2001 Dodge Ram Pickup

Haven't installed yet, but looks like this is exactly what I need 370327


Comments

All the parts I purchased worked great. I used a 20 car hauler trailer to move about 8,000 lbs of shop equipment lathe, mill, welders, engine drives, tools, etc... from Yuma AZ to Manhattan KS. The trailer brake worked as advertised, trailer plug connects

Mark - 04/24/2018

37572

- 118329
by:
2001 Dodge Ram Pickup

This is an excellent product at a great price! It installed exactly as described for my 2001 Dodge Ram 1500. I also bought the Curtis 4pin wire harness. Hitch took 20 minutes, wire harness-15 minutes. Done in under an hour!!! 372059



- 118329
by:

Great service easy and Stoll and on the road in less than five minutes thank you very much 366320



- 118329
by:
2001 Dodge Ram Pickup

Great buy and problem free. Easy to ins tall. 366265



- 118329
by:
2003 Dodge Dakota

The packing wasn't great but at least the product wasn't damaged. Great customer service and the product is as described. a little tight fit but it fits and looks great! also, very easy to connect the wiring included. 367036


53
190
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring
Do you have a question about this Custom Fit Vehicle Wiring?


  • Recommended Trailer Wiring Harness for 2001 Dodge Dakota
  • For your 2001 Dodge Dakota, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118329 is a confirmed fit. Another option is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55329 which is also a confirmed fit. Either of these options will plug into your Dodge Dakota's wiring harness, which is located at the rear, along the inside of the frame rail on both the driver's and passenger's sides. I recommend using mounting bracket...
    view full answer...

  • Recommended Class III Trailer Hitch for 2000 Dodge Ram with Step Bumper
  • For your 2000 Dodge Ram 1500 with a step bumper, I recommend the Draw-Tite Class III Max Frame Receiver Hitch # 75101. This Class III hitch is confirmed to fit your Dodge Ram with the step bumper and will use existing holes in the truck's frame for a no-drill installation. This hitch will provide you with a 2 inch receiver opening and a 5,000 pound towing capacity. I have attached the written installation instructions that you can take a look at. The complete hardware kit will be included. If...
    view full answer...

  • Recommended Hitch Receiver and Wiring for 1998 Dodge Dakota
  • The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13145 is advertised by us as the best price online because of our lowest price pledge. If you click on the link on any of our product pages you will find the information on how we will meet and beat any same part price of our competitors on all the parts we carry. This trailer hitch receiver is easy to install and is corrosion resistant with a powder coated finish to the sturdy steel construction. If you need trailer...
    view full answer...

  • Parts Needed to Install Brake Controller in 1997 Dodge Ram
  • The brake controller install harness you'd need for installing a Tekonsha brake controller # TK90160 in your 1997 Dodge Ram is the part # 3020-P if you have the factory 7-way at the rear of the truck. Since it sounds like you do not have any trailer wiring on your truck you'll need to start with a 4-way # 118329. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way...
    view full answer...

  • Installing Trailer Wiring Harness on a 1999 Dodge Dakota
  • The Tow Ready # 118329 T-One vehicle wiring harness you referred to is indeed the correct trailer wiring harness for your 1999 Dakota. The trailer wiring harness plugs inline with the vehicle wiring harness that feeds the truck's taillight assemblies, as you can see in the installation video I've linked for you.
    view full answer...

  • How to Install a 7-Way Trailer Connector on a 1997 Dodge Ram 1500
  • In order to install a 7-way trailer wiring harness on your 1997 Dodge Ram 1500 you are first going to need a 4-way trailer wiring harness if you do not already have one and for that I recommend the T-One Vehicle Wiring Harness part # 118329. This is a complete plug and play option that will not require any cutting or splicing. Once you have the 4-way installed you will then want to use a 4 to 7-way trailer wiring harness adapter. If you will be installing a brake controller then I recommend...
    view full answer...

  • Trailer Hitch Recommendation for a 2001 Dodge Ram 1500 and 7,600 Pound Travel Trailer
  • For your 2001 Dodge Ram 1500 I recommend Curt trailer hitch # 14001. It is rated for 10,000 pounds gross trailer weight and 1,000 pounds tongue weight. The other available hitches are either rated too low or way over what you need. This one is just right. I have linked the instructions for you. I also recommend etrailer ball mount kit # EBMK2416. It comes with a ball mount, 2 balls, a hitch pin with clip, and a storage bag. And if you need to add a trailer wiring harness you can use...
    view full answer...

  • Will Curt Trailer Hitch C13145 Fit a 1998 Dodge Dakota Short Bed
  • Bed length does not matter in this case. Curt trailer hitch # C13145 will fit your 1998 Dodge Dakota with 6-1/2 foot bed. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level,...
    view full answer...

  • Can a Trailer Ball Be Mounted Directly To The Bumper of a 1999 Dodge Dakota
  • Some vehicles are designed with a hole in the bumper for attaching a ball for towing. You need to check your owners manual or with your dealer for the towing capacity of your Dakota. You should also check with the Dealer to see if the bumper on your Dakota is rated for towing. I have attached an FAQ article that has tips on how to tow a trailer. You will need to measure the hole in the bumper to make certain you have the correct diameter shank on the ball you wish to attach. If you have...
    view full answer...

  • Will Draw-Tite 2-1/2 Inch Trailer Hitch Fit a 1997 Dodge Ram 3500 Dually with Step Bumper
  • A roll pan bumper will not have any sort of step on it. A regular bumper will have that center "step" where the license plate sits. It sounds like you have a standard bumper so you would not have to worry about that at all. I have linked a help article that shows drawings of different bumper styles. Some of the fancier trim models of the later Rams might have come with a roll pan bumper, such as a Rumble Bee or some version of the Sport. I also recommend etrailer ball mount kit #...
    view full answer...

  • Installing 7-Way Trailer Connector on 1998 Dodge Dakota
  • It looks like you're wanting to install a 7-way on your vehicle, is that correct? If your truck was equipped with the factory 7-way, and you're wanting to replace it, you'd just unplug the harness from the rear of the connector, and replace it with a 7-way like part # HM40975. If your Dakota doesn't have a trailer connector, you'd first install a 4-pole like part # 118329. How you'd proceed from here will depend on how your trailer's equipped. If your trailer doesn't have electric brakes,...
    view full answer...

  • 7-Way Trailer Connector Recommendation For 1997 Dodge Ram 2500 Pickup
  • If you have no trailer wiring presently on your truck I recommend the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # 118329 first. This simply plugs into the existing wiring on your truck along the frame rail as shown in the attached video. You will then need part # ETBC7 to plug into the 4-way connector and with additional wiring will give you the 7-way you need. There is no plug and play wiring harness available for your Ram. The ETBC7 is typically...
    view full answer...

  • 7-Way Recommendation for 1999 Dodge Dakota RT
  • You will need to start with a 4-way (if you do not have one). For that you would want the # 118329. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the Prodigy P2 Brake...
    view full answer...

  • Brake Controller Needed and Differences Between Electric and Electric/Hydraulic Braking Systems
  • I'd be happy to explain that a bit for you. There are a few different braking systems available for trailers, with electric being the most common. The brake controller sends voltage back to the electromagnets in the brake assemblies, which stick to the inside of the drums, spreading the brake drums apart so they push against the inside of the drums helping to stop the trailer. Some trailers use hydraulic brakes, like cars do. These can be actuated by a surge coupler that compresses...
    view full answer...

  • What is the Differences Between TowReady T-One # 118329 and Curt # C55329 Wiring Harnesses
  • The two products you compare, 4-pole trailer wiring harnesses # 118329 and # C55329, are functionally the same and connect to your 1999 Dodge Dakota in exactly the same way. Both take stop/tail/turn light signals from your Dakota and through plug-in connectors that attach underneath the vehicle deliver these lighting signals to your trailer. Both are equipped with a flat 4-pole trailer connector.
    view full answer...

  • Recommended Trailer Hitch Receiver For 1997 Dodge Dakota Sport
  • For your 1997 Dodge Dakota Sport, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C13280. This is a square tube design that will easily bolt on to your truck. It has a nice gloss black powder coat finish over a protective base coat for superior rust resistance. There is not a similar hitch to the Curt # 13229 available in style or in the number of bolts to install. It is not compatible with your model year. If you will be using this hitch receiver...
    view full answer...

  • Installation of a Trailer Brake Controller on a 1997 Dodge Ram 1500
  • If your 1997 Dodge Ram 1500 had a tow package with a 7-Way connector from the factory, then your truck is pre-wired and will have a port underneath the dash to attach a brake controller. If the truck came with a 4-Way connector tow package, it will also have a port under the dash. You will have to add a 7-way connector at the rear, and run the brake wire and any other accessory wiring you need for your trailer. Our Brake Controller 7 and 4 Way Installation Kit, item # ETBC7, includes...
    view full answer...

  • Connecting 4-Pole Tow Ready Trailer Wiring Harness 118329 in a 1997 Dodge Ram 1500
  • The trailer wiring harness you reviewed, Tow Ready T-One # 118329, is a plug-in no-splicing trailer wiring harness that is intended for connection to the existing wiring in your 1997 Dodge Ram 1500 to provide a flat 4-pole trailer connector. The video link provided demonstrates the installation process. The left and right side T-connectors in this harness plug in between the tail light wiring connectors located underneath the vehicle. The connector with the yellow wire is for the driver...
    view full answer...

  • Trailer Hitch and Wiring Recommendations for a 2000 Dodge Dakota
  • No, the Curt trailer hitch # 13229 will not fit your 2000 Dodge Dakota but we do have other trailer hitches that will fit such as # C13280. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow...
    view full answer...

  • Hard Wiring Brake Controller On 1996 Dodge Ram 1500 Pickup
  • You will need a couple of items to hard wire the brake controller to your 1996 Dodge Ram 1500. If you do not have a 4-way connector at the rear of your truck you will need to install the Tow Ready T-One Vehicle Wiring Harness, part # 118329, to get a 4-flat connector at the rear of your vehicle. You will then need to hardwire the brake controller to your vehicle with the # ETBC7 kit. I have attached a drawing that shows the wiring diagram when installing the # ETBC7. The installation...
    view full answer...


Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Expert Research:
Jackie C
Expert Research:
Michael L
Video Edited:
Zack K
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Video Edited:
Joshua S
Expert Research:
John H
Updated by:
Adele M
Expert Research:
Adam R
Updated by:
Laura H
Installed by:
Cole B
Test Fit:
Shane T
Expert Research:
Jeffrey L
Updated by:
Sarah W
Updated by:
Alexander C
Photos by:
Stacy F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!

Call 800-298-8924