bing tracking image
  1. Vehicle Suspension
  2. Timbren
  3. Jounce-Style Springs
  4. Rear Axle Suspension Enhancement
  5. Standard Duty
Timbren Rear Suspension Enhancement System
Special Savings on Select Timbren Items. See Cart for Savings.
Timbren

Timbren Rear Suspension Enhancement System

Part Number: TGMRSB4
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$269.36
Retail:$316.90
You Save: $47.54
Vehicle Suspension

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

2,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use. Great Prices for the best vehicle suspension from Timbren. Timbren Rear Suspension Enhancement System part number TGMRSB4 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (6425)
  • Q & A (0)
  • Videos (2)
  • Photos

Timbren Vehicle Suspension - TGMRSB4

  • Jounce-Style Springs
  • Rear Axle Suspension Enhancement
  • Timbren
  • Standard Duty

2,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.


Features:

  • Improves suspension, handling and safety
  • Provides additional support as needed so you always have a smooth, comfortable ride
    • Allows the leaf spring ample movement while cushioning light loads
    • Becomes more rigid as more weight is added
      • Increases stability - providing great performance while hauling heavy loads
      • Reduces vehicle sag
  • Works independently - side-to-side
    • Helps compensate for off-center loads
    • Reduces body roll when swerving and turning corners
  • Acts as shock absorbers, taking the brunt of bumps and rough roads
    • Extends the life of your vehicle's suspension


Specs:

  • Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
    • Replaces axle bump stops on frame
    • No drilling required
  • Capacity: 2,000 lbs
    • Do not exceed the vehicle's weight-carrying capacity
  • Designed to work with a suspension system that is in good working order
  • Limited lifetime warranty - satisfaction guarantee


An example of sag on a vehicle's rear axle under a heavy load

Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.


Diagram of the Timbren spring installed

The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.


Animation of a standard Timbren rubber spring

Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.


Timbren suspension system works to prevent body roll

Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.


An example of a trailers swaying

Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.


An empty truck on a bumpy road without Timbren

Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.


Timbren Suspension Enhancement Compared to the Competition

Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride because the rubber has more travel.



GMRSB4 - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren

Installation Details TGMRSB4 Installation instructions

This Product Fits The Following Vehicles




Video of Timbren Rear Suspension Enhancement System

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Timbren Manufacturer Spotlight - Suspension Enhancement

Hey guys, it's Jake here with etrailer. Today we've got John with us from Timbren. He's gonna tell us a little bit more about what separates Timbren from the competitors. I appreciate it, I'm glad to be here. Timbren is a suspension specialist. We're based in Whitby, Ontario, so we are a true manufacturer in Canada and we offer a wide range of suspension products from light duty, from commercial all the way up to Overlander, Sprinter applications and trailers.

Now we've talked about a few of the options you guys have and we have plenty of options on our website. Right. We've got the SES kits. We've got the axle-less suspension. Right.

We've got your new coil inserts that just came out recently. But what would you say is your bread-and-butter at Timbren Yeah, no, our SES, suspension enhancement system, is definitely our bread-and-butter. Came out in 2011, won a SEMA New Product Award for best truck suspension. And really, the evolution you just mentioned here, you know, starting in 1968 all the way through now, 2024. But the SES kits are really the core of who we are.

And if you, if you would say at, in the level of stiffness on the market, what would you, would you put yourself in more in a heavy duty side for the SES kits or is it more of a lighter duty Yeah, great question. Lighter duty, we certainly can have a product for commercial and heavy duty, but in '82 when SES was introduced, it was purposely introduced for that, that light duty market. So we start with 1500 and again, go all the way up, but by far really popular with that 1500, 2500 crowd. That kinda leads me into my next question. So we talked about, your specialty is kind of in the lighter duty, but do you have an option for the heavier duty for your sprinter vans and maybe for your truck bed campers Yeah, absolutely.

We do have SES kits for truck beds, truck campers with a higher center of gravity. That creates a new kind of set of problems with the sway side to side. So we have severe duty kits for those. And it uses a single convoluted AON versus a double convoluted to tackle that problem of side to side. And the same thing with the sprinter van. It uses a rectangular shape Aon, but it's there to do the same deal that side to side sway because they're so top heavy, it'll eliminate that. Okay. And then we've had an instance here at etrailer that we had a van that was very, very heavy on the one side. Is there anything that you guys can do personally to help, I would say, I guess customize that kit for that particular user Yeah, by all means we would want that individual to contact us. We would ask a couple questions, see where that weight is distributed and we can actually produce an AON with either a stiffer hardness or durometer or a softer durometer and that will help level it out. So yes, we can take care of that for 'em. And I think that'll really, really help people to get their rigs dialed in because who knows what they're putting in the campers afterwards, after they buy 'em. They come from the manufacturer already heavy on that side and they're trying to load stuff on the other side to try to even it out. But knowing that there's a solution that you can customize for your rig no matter what the weight is on either side is really, really cool. Yeah, absolutely. We're happy to take care of 'em and again, there's no charge for that. Awesome. Now to kind of wrap things up, what sets Timbren apart from a lot of other manufacturers out there Well, I think there's a couple things. We're a family run company and our longevity, you can't deny, 1968 to 2024 and our warranty, we have a lifetime warranty regardless of how old it is. We will take care of it, replace it, limited lifetime warranty, and the hundred day money back guarantee. Very cool. And that's whether or not you're the first owner Right. And yeah, we're not asking for receipt, who'd you buy it from It'll be taken care of. Just give us a ring and we'll take care of it for you. Very cool. Well thank you again for meeting with us. Appreciate it. It was a pleasure to work with you. Thank you.


Customer Reviews

Timbren Rear Suspension Enhancement System - TGMRSB4

Average Customer Rating:  4.7 out of 5 stars   (6423 Customer Reviews)

2,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

by:
1999 Chevrolet Suburban

The Timbren Enhancement System was straightforward to install and has eliminated the suspension bottoming out when pulling a loaded trailer. I believe it will last longer and be trouble free compared to an air assist leveling system.



by:
2018 Chevrolet Suburban

I use my 1998 K1500 Suburban a lot for hauling. Anything from an 18 ft car hauler, 12 foot enclosed, to open utility trailers. I like the way the springs ride when unloaded as well as the extra load capacity when heavy loads are applied. Very nice product.



by:
1999 Chevrolet Suburban

Easy install and fit perfect! Perfect for adding suspension support without having to run air lines or add leaf springs! Maintenance free and worry free. Really helps out when loading the rear or towing!
1999 GMC Suburban K1500 4WD.



by:
1995 GMC Suburban

While I just received these yesterday, I test fit them and looks like a snap to install( free shipping!). Looking forward to see how they control bounce and roll. As unloaded, about 1" clearance to the bump stop so looks like it wil ride just right with the load distribution system on the trailer. Keep you posted!



by:
1999 Chevrolet Suburban

Just what I was looking for. Will install tomorrow. Good price. Very prompt shipping. Thanks!



by:



by:
1994 Chevrolet Suburban

Simple to install



by:
1999 Chevrolet Suburban

seem to work like I expected



by:
1999 Chevrolet Suburban



by:

Easy install took about 20 minutes on my 2017 Ram 3500 SRW. Had about 1/2 inch clearance as recommended. Loaded up my 5th wheel (2350 hitch weight) and about 200 lbs of gear in the bed. Just got back from a 800 mile camping trip through mountains of TN. You can really feel the difference around those sharp corners and uneven surfaces. The truck felt firm and controlled not hard and jarring as some have mentioned. Going over those overpasses with the wonderfully smooth (Not) joists was greatly improved. The truck would squat and rebound again, with a firm controlled response. Driving without a load felt the same as before without them. I would highly recommend these! Ordering from etrailer continues to be my go to option!



by:

The product came very fast. I already installed it the same day on my 2009 Dodge Ram pickup. It looks like it should do a fantastic job. I'll know better when I hitch up my travel trailer.



by:

Took about 45 minutes to install. But that was 2 trips into the house cause my deep drive sockets were buried. F-350 gasser with 8’ box, Fiberglas cap, 200lb wooden storage drawers and estimated 400lbs in tools. I tow a 14k bumper pull dump that squats the truck. I installed the spacer with the timbrens and it sits on the original axle stop. Ride quality is unknown as I haven’t driven it yet.



by:

I bought the timbren SES 121474110. I am not really satisfied with how these helped my trucks towing stance. The truck tows the same. I carry an in bed tank with 50 gallons of fuel in addition to the 35 gallon fuel tank from factory. The truck rides the timbrens the whole time. Thats okay, my problem is that the truck squats the same amount with these when I hook up my car trailer. The truck still goes straight down to the load leaves (pretty heavily squatted) the same as before. Did I get a light duty version? dont feel these meet the 6,000 Ibs capaticy as advertized. I think I should have gotten air bags. The product was well made. so they still get 2 stars. Just not what I thought it should have been.



by:

I know it will be lovely when loaded or the trailer on. However,it rides like a wagon empty with brand new premium shocks and struts empty. Thud thud thud. You really cannot feel the shocks or suspension. Found exact same item plentiful for 60 bucks on eBay after I bought these for 250. I may cut these in half or put air bag on. I do not like the ride empty. No hard feelings. It is a good product maybe just not for me.



by:

Installation was a breeze, removed old bump stops installed Timbrens in about 30 minutes. Haven’t put a load on them yet so I’ll update later. Installed on a 2008 Silverado 2500HD..



by:

Was able to install these with a 15mm flex head ratchet wrench and lifted the rear of the truck to make it easier. 30 minutes to take off 4 nuts and put em back on. 2 minutes assembling the timbrens with the added spacer. I have a f350 with a salter and plow. Loaded with salt the lights shoot up and in the snow ?? it’s like hitting hyper drive and you’re blinded. These helped big time. Very happy so far.



by:

Out of the box fit !!
Only issue I had
was keeping the wedge from moving during installation



by:

The pro: The longer, heavier bump stops worked great when hauling my mustang home from Chicago. The truck stayed level and handled great.
The con: I had to remove the bump stops for everyday use. They limited my suspension travel causing a stiffer ride.



by:

I am so glad I bought these for my truck. I was able to install them myself using a jack and jackstands. The ride is bit rougher now; but the suspension is totally awesome compared to before. I am able to haul a bit more weight when needed.



by:

very good product ,received just in time and fit perfectly on my GMC savana 2000 .Be sure to clean the two receptacle thats help.
très bon produit , reçu dans les délais et s'ajuste parfaitement . Assurez-vous de nettoyer le receptacle cela facilite l'installation.



by:

After successfully using air shocks with on board compressor on our 2001 F250 for years, I almost automatically put the same setup on our new 2022 F250. We tow an 11k lbs travel trailer. Then I read reviews on Timbren Suspension Solution & thought, worse case I’ll end up with both solutions. After spending 20 minutes installing Timbren and towing the trailer a few miles, it became obvious I didn’t need air shocks, or anything else. The truck & trailer drive as one. Our rig is level and rides great. When the trailer is unhitched, the Timbren’s aren’t engaged - just a normal F250 ride.



by:

The Timbren rear suspension bump stops are the best by far. I installed this unit on a 3rd gen Toyota Tacoma which became an essential item for safety towing purposes.

The main reason for purchasing this product was for aided support for towing. This is essential for those who tow boats, tear drop trailers or medium sized campers.

The stock bump stops are relatively small in size which is standard for other vehicle manufacturers however Timbren's bump stop are made with such high quality material and craftsmanship.

This also helps in preventing in stressing the front suspension from becoming raised which can affect your steering when your towing. The Timbren bump stops also helps in preventing your rear suspension from the "sagging effect" which can cause stress to your tires.

I recommend that when you install the bumps stops, check the lugs every quarter or depending on frequent you tow, to include tightening the lugs with a torque wrench to ensure it's torue specification(s).

This product has given me peace of mind when traveling long distances and when camping off the grid. Timbren also has good customer support service however etrailer has paramount customer service as well.



by:

I’d seen similar products rated in the 4,000 lb ratings but I went with these. I’m not a mechanic but I removed the factory bump stops and installed both these in 30 minutes or less. I used my rolling jack and lifted from the drop hitch and easily removed the old ones and soapy water and 1/4 twist and these were on. Placed a block of wood in the space between these coils and lowered the jacks then pressed it with my tractor to confirm full engagement. I carry a lot of tools on a 2020 Chevy 2500 I do feel a bit of butt bounce on large bumps but other than that I’m very pleased.



by: 09/15/2024

Caution,these parts did not fit my 2008 Suburban 1500 as advertised. Also FYI, Amazon also says they will fit. After some alterations I got them to finally seat. Tha original bump stops have a groove cut into them about a 1/2" from the top to accept 6 pertrusions that are stamped in the bump stop cup. After several attempts to press the Timbrens into place they wanted to pop out or were very easily removed with little pressure.I ended up cutting in 6 notches with a utility knife. Photos attached. I used markings on the old bump stops to determine spacing. I marked the Timbren with chalk to illustrate approximately where I notched them.Caution, cutting hard rubber with a utility knife is dangerous if you are not used to using a utility knife. I believe Timbren makes a spacer with a groove cut in them. That would make installation a lot easier. I cannot fault etrailer because they probably are following Timbren specks. Also I am not sure all Suburbans of this era have the same bump stop cup. I would recommend checking your old bump stops before ordering. Hope this helps.



by:

Worthwhile investment. Easy and simple install. Adds stability to keep RV from wanting to tip over. Same as adding a torsion bar. Needed to jack up the body, to install and after installation, Timbrens are engaged with no clearance either on top or bottom. I would purchase again if needed.


25
3509
Show More Reviews

See what our Experts say about this Timbren Vehicle Suspension

  • Can Timbren Helper Springs be Used with Weight Distribution on a 1997 Chevy Suburban
    When sag is caused by trailer then weight distribution is the ideal solution. You mentioned that you are using weight distribution but it may not be adequate for the total tongue weight or it could need some adjustment. When calculating tongue weight for weight distribution you take the tongue weight of the trailer, when loaded and ready to tow, and then add the weight of anything carried behind the rear axle of the tow vehicle. You mentioned 6 people in your 1997 Chevy Suburban 1500 so...
    view full answer...
  • Height of the Timbren Rubber Spring in the Timbren Suspension System # TGMRSB4
    I spoke to my contact at Timbren and she informed me that the height of the rubber spring is 4-3/4 inches plus the thickness of the plate which is 1/4 of an inch. You should note that suspension enhancements are designed to work on vehicles with functioning suspension, if your suspension is worn out I would not recommend you use this system on your vehicle.
    view full answer...
  • Will the Timbren Suspension Enhancement Work on my Lifted 1998 Chevrolet Suburban?
    You can in fact use the Timbren Rear Suspension Enhancement System part # TGMRSB4 on your lifted Suburban. They have spacers specifically designed for this situation. They are available in 1' and 1/2" sizes and the trick is to get the Timbren to sit between 1/2" to 1 1/2" off of the axle. All lift kits are different so to tell you exactly what you will need is impossible. But you will a couple for sure. Timbren 1" Spacer For Raised Frame Vehicles part # TA25723-90AD00 Timbren 1/2" Spacer...
    view full answer...
  • Rear Helper Springs for a 1999 Chevy Blazer Towing a 2,200 Pound Boat Trailer
    I will be happy to help you out. Timbren springs # TGMRSB for the 1999 Chevy Blazer are for 2-wheel drive versions of the vehicle. And # TGMRSB4 is for 4x4 models. Both kits are rated for 2,000 pounds. The fact that your trailer weighs 2,200 pounds means that the tongue weight is around 220 pounds so the springs are rated for more than enough for the trailer tongue weight. Another option for 2- or 4-wheel drive models is RoadActive Suspension # RAS4527-T. This system will not make the...
    view full answer...
  • Will Firestone Ride-Rite Air Bags From 2012 Ford F-150 Work On 1994 Chevrolet Blazer
    All of the Firestone Ride-Rite Air Helper systems we carry are not designed for your 1994 Chevrolet Blazer. If your Blazer is a 4 wheel drive full size, I recommend the Timbren Vehicle Suspension, part # TGMRSB4. This is an easy no-drill installation and will not affect the empty ride of your Blazer. It will become more rigid when weight is added. If your Blazer is a 2 wheel drive I recommend part # TGMRSB. Like the kit used on the 4 wheel drive, it helps reduce sag.
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Carrie F
Updated by:
Carrie F
Employee Bethann B
Updated by:
Bethann B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Installed by:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.