Timbren Active Off-Road Bumpstops - Front Suspension - 2,000 lbs

Video Transcript for Timbren Active Off-Road Bumpstops Review

Hi everyone, Aidan here at etrailer. Today, we're gonna be taking a look at these Timbren Active Off-Road Suspension Enhancement System Bumpstops. These are gonna come in a variety of different fits and kits for various different vehicles, so be sure to check the fit guide and find the right kit for you. But let's check out the whole line and see how they work. So these bumpstops are designed to be a custom fit application for the front end of whatever vehicle you put them on. We just finished installing them on the 4Runner here, and it just dropped in place where the original factory bumpstops were.

These ones are a fair bit bigger, not completely huge, but still an upgrade from the factory ones, giving us enough room for some movement and travel, but offering more support for off-road applications and increased support for things like body roll. Now, depending on what you're looking for, you might consider a set of these for the rear. Those are often used for towing applications or we've got tongue weight on the vehicle or a load in our truck bed where there's maybe some sag back there. So if that's more what you're looking for, use our fit guide to find the right kit for you on the rear axle, but for the front end, this is what you can expect, and it's mainly going to be targeting the driving performance. These are going to be constructed with a natural rubber compound and come with all the pieces you need to get set up.

Pretty much all of them are gonna be designed to be a custom bolt-on application with little to no drilling required. Now, obviously, that's going to depend based on whatever kit you go with, the installation process will be a little bit different. For the 4Runner ones here, it was really just threading it directly into a factory weld nut, and in the case of that factory weld nut being broken or not operational anymore, they do include a nut with the kit in case you need it. And while Timbren does offer these Active Off-Road Bumpstops that are designed to give you a little bit more travel and maybe be better for off-road applications, they do offer other kits that are just their standard suspension enhancement system. Now, again, depending on what kit and vehicle fit you go for, it might be a little bit different, but for the most part, it should be a little bit bigger and be more targeted towards just increasing the overall ride quality of your vehicle when you're driving.

So in the case of these 4Runner ones, they make quicker contact and help a lot more with body roll. Even though they don't give as much room for travel, they will offer a great amount of support, especially over the factory bumpstops. And with these springs, I do wanna mention, it uses a progressive spring rate, so the more that they compress, the more they're going to push back and try to return the vehicle to its natural driving state. So as it compresses more, it is going to offer more support where it's needed. And that's really all there is to it, it really just comes down to finding the right kit for your vehicle, and then, getting them installed.

That installation process is gonna vary depending on which kit you go with, so be sure to check our website, see if they have any install videos to follow along with, but for the most part, they're very straightforward, it's just a bolt on installation. But that'll do it for a look at this line of Timbren Active Off-Road Bumpstops. Thanks for watching.