To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
3,000-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.
Features:
Specs:
These additional leaf springs add support and sway control to your existing OEM suspension. Just bolt on SuperSprings over your existing factory springs, and they automatically work when you need them. As the factory spring flexes, a roller at each end of the beefy helper spring reacts to engage the helper spring and to provide extra support. The springs help to better distribute cargo weight throughout your existing suspension, channeling that weight to the points on the frame that are designed to support heavy loads.
Placing these leaf springs above your factory springs helps to keep your OEM springs from twisting, so the SuperSprings act like a sway bar, reducing the body roll that makes driving more difficult and dangerous. With these helper springs, driving is safer and easier when it's windy, when your vehicle is rocked by a passing semitruck and when cornering. The springs help to reduce sway by up to 30 percent. SuperSprings also allow more wheel travel in the rear suspension when they are under load, so they maintain traction and ride comfort better than rubber or polyurethane bumpers. That means they're great for drivers who frequently tow.
You can also customize the level of support provided by SuperSprings. For most models, the shackles that attach the helper leaf springs to your existing leaf springs have several installation options:
SuperSprings are a maintenance-free, low-cost alternative to air spring systems, which require constant monitoring and air pressure adjustment. These helper leaf springs respond automatically to the load you carry, so there is no crawling under your truck to adjust them. You'll also reduce wear and tear on your suspension, brakes and tires, which saves you money. The bolt-on installation means that they are easy to fit - no drilling required.
This suspension stabilizer kit is perfect for trucks towing fifth wheels, campers and gooseneck trailers.
An additional mounting kit is included for installation with factory springs that set above the axle.
For vehicles with factory leaf springs that set above the axle, this mounting kit ensures that SuperSprings operate silently when the vehicle isn't loaded. When factory springs set below the axle, the axle itself serves as a fulcrum for the helper leaf springs. However, for vehicles that have OEM springs that set above the axle, the 2-inch brackets in the mounting kit act as fulcrum points on the underside of the SuperSprings. Furthermore, the shackles at the ends of the helper springs hold them in place and pivot as the load is transferred to the SuperSprings. Because there is minimal preload tension in the installed SuperSprings, you get a quieter ride.
Average Customer Rating: 4.7 out of 5 stars (253 Customer Reviews)
3,000-lb Capacity. Install these helper leaf springs above your vehicle's rear factory leaf springs. They reduce sway and prevent sagging, which is perfect for towing or hauling heavy loads. Designed for OEM springs that sit above the axle.Looks like good product.
Haven't installed them yet but looks like good quality.
great product fast shipping
easy install improved ride and towing
thanks guys will be ordering from ya again
Installing these on a 2020 F250 was easier than I thought it would be. I was able to get the springs on whit the center piece and the front shackle bolted without jacking up the truck. I had to jack the frame up a few inches on each side to get the back shackle bolt through. I put the shackle bolts through the bottom holes since I only need the extra support when I tow. I recommend air / power tools for the shackle nuts and it doesn’t hurt using them for the center bracket u bolts. They are lock nuts and they have a long way to run on for each bolt. I did have to bend my parking brake cable hangar out a bit for one of the shackle bolts to clear the cable. The truck seems to sit a little higher in the back. Maybe an inch or so. The ride empty seemed the same except it felt like it didn’t roll quite as much when turning. Rolling over a lip at the end of our driveway the extra stiffness was noticeable, however. I won’t know how well they really work until I get my fifth wheel hooked up.
They increase the carrying capacity of the stock springs by adding an additional leaf. We drive our van with most of the load above the rear suspension and it was bottoming out on occasion. Works as advertised; no more bottoming out! It is a bit of a struggle to install, so a professional may be needed
This product did exactly what I needed. Lift the RV up to unloaded height. I have not exceeded the 12500 GCWR but the rear end was dragging like it was severely overloaded. It was a very tight fit because the mud flap framing and gas lines were almost in the way. An entire day later with a couple of clamps and sore wrists at max setting fixed the sag perfectly! I wish I had before and after pictures. I can almost fit my head in the wheel where I could not get my arm in before.
I used the SuperSprings to help support my Slide In Camper for my 2500 Chevy. They support good. I have Timbren installed also, but were bottomed out. After adding the SuperSprings with the Timbren the camper is supported good. The truck sits and rides level
No issues with install on a 2023, E350 Class C motorhome.
After chalking the front wheels, I used two 3 ton floor jacks with 13” 6x6 blocks just behind the springs to lift the frame and rear tires off the ground to remove the wheels. For safety, 3 ton jack stands were put under the axles during spring installation
After installing the springs per manufacturer instructions, two 1/2” x 10” pieces of all thread with drilled flat bar were used to compress the front end spring.
With the least amount of preload it raised the back a good inch.
The 800# trailer tongue weight will be the next test to see if more preload is needed for a level ride height.
The Super Springs work great! I pull a 8,500# trailer with a hitch weight of 950# with a 2004 GMC Sierra 1/2 Ton. The truck pulls fine but even with an equalizer hitch still had some sag. The Super Springs were easy to install and leveled the rig. After a year everything still works great.
I have used the Superspring product on many Mercedes 2500 Sprinters.
The factory springs typically struggle to support the laden weight of the vehicle after it has been built out.
This helper spring is an excellent option to increase the capacity of the sprung weight in the rear of the vehicle.
These worked great crossing the country last month.
Great product, fast shipping. My only complaint is the package was delivered with both ends of the box ripped open. Luckily no missing components
Installed on a 2016 Toyota Tundra. I pull a 28 foot aluminum frame utility trailer. Hauls like a 3/4 ton with super spring. Rides like 1/2 ton without load. I have put 1 ton load on truck with no trailer and the truck drove fine. The front of truck at tires rose 1/2 inch. Installation requires the frame to be lifted off the axel.at rear of vehicle. I like this system better than air shocks as there is no adjustment after installation. I would purchase again.
I got this to prevent bottoming out my truck when towing our travel trailer. Won't know for sure if this actually works until we load up. Having said that, the instructions provided with this are poor and talking with Supersprings tech support was frustrating. As mentioned elsewhere, you will need two "C" clamps to pre-load the spring and I wound up fabricating a 3" extension bracket for the brake lines; neither of which were mentioned in the instructions. I also removed the wheels to provide working space and air tools are definitely the way to go. On my '13 Tundra, the distance between the stock spring pack straps is 40" the same as the distance between the eyes on the Superspring. I was advised that the spring is mounted off-center to avoid conflict with the stock spring straps; however this in not mentioned in the instructions. This placed the Superspring about 4" forward of the center of the axel instead of centered on the axel. (see photos) This seems counterintuitive to me but we'll see. This added 1.5" in height to the rear of the truck. It took me 4 hours to install by my self, including time to fabricate the brake line extensions and dealing with Supersprings staff twice on the phone. During the second call, the tech mentioned that they get a lot of phone calls for Tundra installs, indicating to me that they already know there are issues with the product and instructions. In retrospect, I would look for a new spring pack if I was doing this again. Hopefully my suspicions are unfounded but I'm hanging on to the box just incase. Etrailer was great with the best price anywhere and quick shipping.
This was by far the easiest mod I have made to my 2019 Ford Super Duty King Ranch! Only took 45 minutes start to finish. Didn't even take the wheels off. Took some pressure off of the springs by lifting the rear end a little using the trailer hitch. Used the bottom holes on both ends and only raised the rear of the body 1 inch. Great product!
The kit looks really good but I can’t figure out how to install. Enclosed are two photos showing my van suspension and the parts your sent. The instructions do not show my van with only one spring. Can you advise?????????????? Thanks.
Overall, the installation of the SuperSprings kit went pretty well. The instructions sent with the kit were not all that clear, but the info on etrailer's website saved the day. Can't wait to put the camper back on the truck and see how it rides!
Great product, very clear instructions. I really appreciated the stickers on each spring showing the correct orientation, that took all of the guess work out of it.
Thanks Supersprings for making a great kit and confirming the product would work with the airbags I had installed.
Product worked as described. Shipping was quick (etrailer used "air" to my state, then on UPS truck)
Easy to install, not sure why they included 2 sets of polyurethane blocks (only one set fit my truck)
Don't notice any ride difference when set at lowest setting. Raised truck approximately 3/4". East to readjust for more preload if needed.
Combined these Super Springs with Timbren load handlers. So far so good.
Great improvement over stock while maintaining ride quality.
Added these springs to my 2500 Silverado to prepare for a slide in camper. They made quite a difference. I did it myself, but two people would be easier. The ride is naturally a little stiffer when empty, but that's the trade off.
The install was pretty straightforward and so far they are doing exactly as they should. The packaging was less than desirable though. The box arrived, opened on one end and the springs hanging out of it. Both plastic bags with the smaller parts were ripped open as well. One nut was missing but fortunately I was able to match it up with what I had on hand.
i have these on a couple of trucks and they work great.more reliable than air bags
E-trailer agent James helped find trailer tow package that fit my 2011 Ford Transit Connect and provided appropriate install video. You're a huge help James. The install went smoothly without a hitch (lol).
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Justin
6/17/2024
They work great pulling our heavy fifth wheel camper. Couldnt be happier.